Unable to set up the connection to the base

Similar Questions

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• Unable to set up the transaction manager

  I'm unable to set up the transaction manager. I am using weblogic.
  
  I created component TransactionManager and placed it to atg/dynamo/service/transaction. This is what I did.
  #/ atg/dynamo/service/transaction/TransactionManager
  $class = atg.nucleus.StaticMethodReference
  staticMethodName = weblogic.transaction.TxHelper.getTransactionManager
  
  I am getting error on next console:
  atg.dtm.TransactionDemarcationException: the transactionManager has not been specified in the call to begin(). Delimitation of the transaction fails.
  
  getTransactionManager() is null begin the method of TransactionDemarcation:
  
  TD. Begin (getTransactionManager (), 3);
  
  I tried with mysql and oracle, that the two databases.
  
  Any help?
  
  Thanks in advance,

  I have it. It was a stupid mistake. Instead of getting the component via the name of will that I tried to get OOTB component by using the new operator, so in order to subject current OOTB, Manager of transactions was been set to null values.

  Sorry Shaik, my bad!

  Appreciate the answers!

• Unable to set up the homegroup

  Original title: Windows 7 2 cards NETWORK Homegroup

  Hello

  I thought it would be simple to the twenty-FIRST century.

  I have computer with Windows 7. and I just bought a second computer with Windows 8.1.

  The windows 7 computer is connect via USB > USB to ethernet adapter > internet broadband.

  The computer windows 7 and the windows 8.1 computer of are connected by an ethernet cable.

  The internet connection was put in common (and I could connect to the internet with the windows PC 8.1) but I have disabled this all by searching for a solution.

  I thought it would be simple.

  Windows 7 is connected to the internet and I put the Ethernet between the two computers in a homegroup.

  Well well... None. So if anyone can help me, it would be much appreciated.

  OK, let's start with the base.

  On windows 7 PC I have 2 networks.

  One is the connection to the internet, I put it in the public (like the internet seems a very public place for me ;-).

  The other connection is to connect to the computer of windows 8. It is an unidentified network (public).

  I have a feeling that this is where the problems start.

  So thank you once again for any poniters or tips!

  S.

  Thank you for your time.

  I found the following solution:

  Network XP and windows 7 - "limited or no connectivity."

  With setting the default gateway and others, the connection of the second NETWORK card after unidentified network and I could now change the type of audience at home.

  Make a homegroup and then went smooth.

• Unable to set up the scaner on PC

  I have a HP Laser Jet 3050 and a new HP Laser M2727. After that I installed the I received the healthy message of mind on two PCs. (Not installed on the PC). Please advise me what I should do to make the two Scanners. Thanks Mike

  I have a hp Photosmart C3100 All in One printer. I had a computer using Microsoft XP but now I have a Toshiba 800 457 7777 computer using Microsoft Vista.  I can no longer scan and print.  using the disc that came with my printer hp photosmart because she says that it is for use only with 2000 and XP.    How can I download the necessary software for scanning / copy use with Vista?

• Unable to fund from the base to the task level

  Hi all
  
  We have a project P1 with two tasks, T1 and T2. Funding is at the level of the task at the outset so that T1 is funded at 100 USD.
  The value of the currency books is INR.
  
  Where T1 has been funded in the first place the USD - INR conversion rate was 40 r for a dollar.
  
  The wheels are therefore:
  
  
  OP: (40Rs exchange rate) 100 USD ~ 4000 INR
  Available1: Exchange 40Rs (rate) 100 USD ~ 4000 INR
  
  
  Exchange rate passes to 35 INR = 1 USD
  
  Now there is a situation where PRC: enhance funding runs and on the order form, there is an amount of unbaselined-500, due to the change in exchange rates.
  Now he does not base line this - 500
  
  It shows the message: Total amount allocated cannot be less than the amount accrued or invoiced.
  
  Surprise party:
  
  I wanted to finance the next T2 to task for another USD 100 @ 35 ~ 3500 INR. Now the sum of unbaselined becomes 3000 INR and the funding inquiry screen still does not work
  Allow me to fund task T2. It gives me the same message ' Total amount allocated cannot be less than the amount accumulated or charged.
  
  I just gave an example of a case, but we have a huge quantum of such projects, and the question is how added.
  
  
  Is this a bug?
  
  
  Kind regards
  SA

  Hello

  It's the standard feature and not a bug.

  1. the funding for the task T1 is down which is less than the accumulated income. Since you have the funding to the task of top, the accumulated income is moored to this task T1. He won't look at funding for task T2.

  2. at the level of reference, you must increase the funding for the same task T1 in the same agreement, and then try to base (if you have the funding base without budget option checked).

  3. If you have core without budget funding not checked, you have to reference level, budget and funding.

  I hope this helps!

  Thank you
  Sirot
  www.projectsaccounting.com

• Page setting for the Port SG200-26 1.4.0.88 corrupt firmware / Firmware Bug?

  Hello

  After the upgrade to 2 switches SG200-26 version 1.4.0.88 firmware, I am unable to set up the CONFIGURATION of the PORT page.

  See the attached images.

  Must be a bug in the firmware.

  Please notify for the solution!

  Hello Dimitris,

  According to the instructions mentioned in the release notes, the downgrade is possible. Please you have the boot updated as well (it is a part of the firmware package)? (answer to this question does not depend on possibility of downgrade).

  What about other browsers, don't know you the same problem with Firefox or Chrome?

• A740 - remove the Base cover

  Hello

  I am trying to remove the cover of a model A740, but it seems virtually impossible. The coverage seems to be one piece and will be simply not to remove. Equipment, manual, in this case, doesn't give me all the tracks. Someone at - he had luck with this and that could possibly help?

  Thank you

  Petter

  Problem solved!

  You must remove the rubber feet on the base. Below, you will find the 4 remaining screws that must be removed before you can remove the base of the cover.

  You can use a small screwdriver to lift loose rubber feet. They will be set to the base once you are finished.

• Unable to set the ip address of network client hosted after the creation of WIFI hotspot.

  Original title: PROBLEM CONNECTING WITH MY LAPTOP WIFI HOTSPOT INTERNET

  Hi all

  I am able to use the Internet to my hotspot of the Tower, when the source of the internet is Public or private wifi.

  so I know the cmd commands of window for hotspot and the client settings (sharing of customer hosted network, address assignment IP etc.,)

  but the problem I am facing is slightly different

  I use my datacard to cdma wireless broadband as my source internet connection(Reliance netconnect +)

  When I try to create for this hotspot, as usual I am able to create the hotspot and be able to share the internet for hostednework customer.

  but I am unable to set the ip address for the network hosted client, if I try to put 192.169.137.1 and 255.255.255.0 ip

  as soon as I close the window, the IP also disappears

  When connect my android phone to this hotspot, it is able to connect, but there is no internet connectivity.

  When I check the client for transmission of package hostednetwork every two envoys and received packet is past, I mean transmitting

  So what caused the rupture in internet connectivity but success hotspot connectivity?

  check the screenshots...

  can u help me...

  It's a bit complicated

  

  

  

  

  Hi Daniel,.

  Advanced networking issues are supported in the TechNet Forums. I suggest you send the request in the TechNet community.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope this information helps.

• HP Envy 7640: Unable to set the scanning resolution

  Have been unable to set the resolution of scan during the scanning of the glass in a computer file (pdf, jpg). Guide the user to the HP page 47 7640 said: "● If you want to adjust the size of the scan, output type, scan resolution, or file type and so on, start scan from the software of the printer."
  ● To avoid all scanned text wrong or missing, make sure that the brightness is set properly the
  software.
  ● If you want to scan a document with several pages in a single file instead of several files, run it
  Scanner with the software of the printer instead of the sweep of the screen of the printer".

  First of all, where is the "printer software" to start the scan?

  Have tried all this. When I opened the series HP Envy 7640 (network): Assistant of HP printer, I click on "Scan the Document or Photo a" place in the scanning area. No scan dialog box never opens. Actually I tried to reinstall the printer driver. No change. Always impossible to get a scan dialog box. In addition, when I go in the start menu and the title of the series 7600 HP: HP envy, I click on the HP Scan icon. After a long wait, a dialog box appears that says: "Cannot communicate with Scanner", and it offers a few options. The first is to activate the device (printer), and then on; the second, control cables (its wireless operation); the third: try the software "fix." Happy to report that after stopping then on and running assistant printer again, this time by pressing the "scan a Photo Document' results in the appearance of a dialog box to make the changes that I've been looking for.

• Unable to set server 2012 without the protocol driver LLDP Microsoft network adapter. I have searched the driver but had no chance. My question is where is it located on the CD-ROM of the 2012 Server

  Unable to set server 2012 without the protocol driver LLDP Microsoft network adapter. I have searched the driver but had no chance. My question is where is it located on the CD-ROM of the 2012 Server? I use the version standard edition. Thanks for any advice.

  Thank you all.

  John Hayes

  Hello

  The question you posted would be better supported in the TechNet Forums. I suggest you to ask your question in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Thank you

• How to run a script as administrator and copy some setting of the connected user's profile?

  I want to copy some profile setting to the connected on folder (% userprofile%\AppData\Roaming\Microsoft\Word) user profile password when they connect. Because the standard user accounts do not have the right admin to copy files to the folder, so I use schedule a task to run the .cmd as local administrator every time that a user login. But, when I use the % username % setting to try copying the file to the logged on user profile, the setting of % username % is interpreted as the name of the local administrator because the scheduled task is run as administrator. Therefore, the file is exemplary in the local Administrator profile. All solutions? Thank you

  I log on as a user account standard and do a right-click the .cmd and run as admin. The script interpreter .cmd parameter of % username % as the admin because I ran as administrator.

  -> Not altogether. There are two cases:

  • You are connected under an administrator account. When you right click on cmd.exe, then you get a 'high' console session that is still running under the name of your current account.
  • You are connected under a regular account. When you right click on cmd.exe and then you get a prompt and admin account name and its password. The new session is running under admin account.

  Is there a way to set the parameter to % username % as long as the logged on user, when you run the .cmd as an administrator.

  -> No - see above. Execution of a session high under a regular user account would defy the principle of administrator accounts.

  Either of these two options, I gave you in my previous answer might work, with a bit of scripting. A much simpler method would be to restore the default permissions to the %userprofile%\AppData\Roaming\Microsoft\Word folder. Normally full, users have access to it. This is my preferred option. With the help of a scheduled task that is running under an administrator account is a kludge.

• I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password.

  Default password Machine virtual XP Mode

  I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password. Please giveme the default password

  If you're talking about XP Mode the default password is XPMUser.  In general you can not use Windows without a password in Windows Virtual PC that you can with Virtual PC 2007 and before.  XPMUser is used only with the XP Mode virtual machine.  All other virtual machines requires a user created password.  If you have changed the password in XP Mode and forgotten, then you have to start over.

  Windows Virtual PC is based on virtual server rather than VPC and all virtual machines need a password.  If necessary, uninstall the integration features, start the virtual machine and create a password for the admin user.  Restart the virtual machine, and then reinstall the integration features.  You will not be able to access a virtual machine created by the user that has no password, while the integration features are installed.  Once you have everything right, that a virtual machine will not be asked a password if you are the admin user in Windows 7.

  @george1009,.

  Everything got?  :)

• Unable to set the transparency of the taskbar to laptop with windows 7.

  Original title: Please read my problem and give a solution as soon as possible.

  HII all... I'm unable to set the transparency of a taskbar for laptop with windows7 operating system? He demonstrated a tab to find out "trouble shoot problem and sero effects transparency" and shortly after clicking the laptop turns on the screen several times...

  Hi Mary,

  We need additional information to help you with the problem of transparency, please answer the following.

  1. which antivirus app do you use?

  2. do you use wired or wireless Internet?

  3. What is the brand and model of the computer?

  If the graphics card and driver were installed after that Windows 7 was first set up, depending on the manufacturer, you may need to update the computer performance index, which will automatically enable Aero. I suggest update you the display update driver and check the status of the issue.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem still exists; Keep the computer in a clean boot, run the Aero Troubleshooter and check the status of the issue.

  Guided Help: the problems of Aero in Windows 7.

  http://support.Microsoft.com/kb/976170?WA=wsignin1.0

  I hope this helps.

• Error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I tried to use the administrator account.

  When I ran the System File Check sfc/scannow

  TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.

  How can I know which files are corrupted.

  Any other Suggestions on how to fix this user profile?  Do I have a profile that I don't know?

  Hi wimuggss,
   
  Step 1: Disable UAC (User Account Control) and check the result
  See How can I change the behavior of user account control by using the cursor?
  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
   
  Important: Enable UAC after you complete the steps.
   
  Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See Start your computer in safe mode
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.