Unable to show the application created

Similar Questions

• iOS 10: unable to update the applications due to Conditions General timeout

  I updated my iPhone 6s to iOS 10 a couple of days and now seem to be unable to update applications. The issue seems to stem from a prompt to read and accept the new "Apple Media Services terms and Conditions." When I click the button to proceed with conditions, a new empty window appears and then things churning just until the request times out (see photos). The same thing happens when I click on "View the apple ID" in the app store or through settings, even if in this case the terms guest does not appear and it charges only up to the time limit. It seems to me that the problem lies in the redirection of the terms of apple. Anyone who has experienced this since the update or does anyone have advice?

  I already tried things:

  -force settings, closed and app store

  -restart the phone

  -disconnected and signed apple ID (this feature works in the app store and the parameters)

  -tested 'show apple ID them' on the phone to my wife (6 s on the same wifi network), successful but the phone still is iOS 9

  -tested "show the apple ID" via iTunes with my macbook, successful and I seem not to be invited to accept the new conditions

  Thank you!

  

  Post edited by: cstrand_apple
  Added pictures and corrected typos

  The issue seems to have resolved itself. The terms and conditions page is loaded and now updates are allowed. Just a temporary problem, I guess.

• Unable to provision the Application - 11.1.2.2 user

  I'm trying to configure a user for one of our applications, but seem unable to do. They are part of a security access to four applications and, for each group, an Ad Hoc user role, Planner and view user assigned. I entered the Services shared and deleted all three rolls for the application of the security group, had the user, disconnect, then reconnect. They still have full access to the application! We tried to transfer and create security filters, which did not work. Not sure what we can try at this point, it's weird.

  We understood the question. The security group was part of a larger group configured to access these same applications. If we removed the two, the user has correctly off put in service for the application. Silly question that is much too long to figure out.

• Apple Watch: How can I get my heart rate to show the application of fitness?

  If I use the fitness app in shape and choose 'Other' for my workout, it shows my heart rate. But if I select 'Run in the open air' or "Walk in the open air" it does not show it. Is there a way to get my heart rate visible without having to leave the app to fitness and pull up on the application of the heart rate? It should be possible as the option 'Other' discount-shaped poster. I was hoping that the new update would automatically as in, but alas, it isn't. For those of us who want to run in a particular range of heart rate, it would be crucial. Fitbit wife t - it? Why not my dear remarkably Apple Watch?

  Help here > your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• When I opened TB, under 'Accounts', it only shows the option "create a new account. Option: "view settings for this account" does NOT appear.

  When I opened TB, I don't see no information on the TB account that I used for years. Instead, the main menu shows only 'accounts'-'Create a new account - Email, Chat, newsgroup, feed'. Option: "view settings for this account" does NOT appear.

  Also the main menu does NOT appear "Email - messages, write a new Message" or "Advanced functions", etc...

  Real emails regarding the TB account I used for years are still present in the "users-> xxxxyyyy-> AppData-> Roaming-> Thunderbird' folder."

  http://KB.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared

• Unable to show the custom workflow

  Hello world

  I use Jdeveloper with JDeveloper 11.1.1.8 extension 11.1.1.7 and Webceter Portal Builder 1.8.

  I created a workflow in Jdeveloper and deployed in WC_spaces server. I added the workflow to shared resources. When I try to access this workflow in my portal, I am unable to find the workflow.

  

  Any help...

  Thanks Vinay,

• MAS does not show the applications purchased in the purchase history

  Reinstalled OSX and trying to restore my apps that I have found that MAS does not display some of my purchased applications. Sing / sign in is not solved my problem. "Display" button too. Of course, I try to click on the button 'get' MAS app page and I will get it for free but problem I don't remember that, two of my credentials, I used to buy these apps and I don't want to be bad and pay for it, 2nd time. How can I get a detailed list of my purchases?

  Thank you

  Hello, Romeo,.

  Thank you for using communities of Apple Support.

  I see you are trying to restore the applications that came with your Mac.  Just check your previous purchases by following the steps below to get the downloaded.

  Since the Mac App Store:

  1. Open the Mac App Store.
  2. From the top of the window, click on purchases. Your purchased apps will appear.
     
  3. Scroll down to find the application you want to download.
  4. Click on install or download to the right of the item you want to download. Your application will download to your computer.

  Download your latest purchases

  See you soon.

• BlackBerry App world & Marmalade - unable to update the application due to the incompatibility of the Package Id

  When you try to submit an upgrade of my existing BlackBerry PlayBook application, my .bar file is rejected due to incompatibility of package-id.

  I looked at the content of the folder bar and compared it to the original version that I presented. Indeed, the package Id has changed.

  What has not changed, it is the id of the application signing certificate or id of the author. The original was presented with marmalade version 6.1, and was built with marmalade version 6.2.

  Any idea on what is causing this discrepancy? Y at - there no fix for this other that screw up my existing version and from new BlackBerry App World? I really want to do because my clients lead are no longer updated.

  In fact, I finally could get an it again. I run the tool for configuring Jam once more, then updated the packages of Marmalade by running the .mkb file. After these two steps, my release was accepted as being compatible with my previous version.

  Thanks for the work around to the subject of manually update the configuration file. I'll take advantage of that in the future if need be.

• Unable to show the details of audit of page html/OPS in the tables in the access to the tracking page. Technology of OFA stack does not come in the tables.

  Hello

  I activated followed Access Page follow the details of the verification of the users who have accessed HTML pages Web OFA as clients/suppliers, etc. in active Instance.I the profile option JTF_PF_MASTER_ENABLED to true to the level site and other configurations.

  But I can't get the Web pages of the OAF/HTML details AC two front and back end tables after execution of the Page access Tracking Data Migration Program.

  I am able to see the single FORM and VERIFICATION Tech batteries and unable to see the OFA technology stack.

  Help us please how do I get the Audit details OFA pages and what should I do?

  But in the Instance of Vision with the same configuration, I'm able to view the audit details OFA/HTML pages of front end and back end tables. In this case, I am able to view the OAF Tech stack.

  Could you let me know what is missing in the extraction of the OAF technology stack front end as well as put an end to the rear when I tried getting a test?

  Thank you

  Aren

  What is the value that is defined for the profile option, "JTF_PF_ENABLED" where the tracking does not work?

  Thank you

• Dreamweaver CS6 unable to launch the Application Manager because of a removed when Creative Cloud membership was cancelled, so cannot launch CS6. Application Manager new download I tried but he wants me to re-register. Maybe I need to old mana application

  I have a Dreamweaver CS6 which was installed stand-alone version on my Mac (OS 10.10.1) for a couple of years now and has worked well. Last year, I joined the creative cloud and got a single subscription to Dreamweaver CC. A week hardly, after 1 year, I cancelled the subscription. I wanted to go back to my old Dreamweaver CS6, but when I launched DW CS6 it grew up the account manager and he wanted me to activate my subscription again. So, through a long process to Adobe customer service, I deleted the application manager. But when I went to the DW CS6 launch, he said that the account manager was missing and impossible to verify the serial number. Then I reinstalled the new account manager to have the same problem occur.  I need to reinstall an OLDER version of the account manager so that it does not have to register again for the subscription of the CC? Is it still possible? Bottom line: how to launch my old DW CS6 stand-alone version without running account manager problems?

  Thank you!

  Run the cleaning CC/CS tool to wipe all traces of your system CS6.

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

  Perform a new installation of 12.0 CS6.

  Nancy O.

• Unable to expand the application group in the SSP in 11.1.2.2

  Hi all

  We have installed Essbase Version 11.1.2.2 in our AIX servers successfully however when I login in shared services and under the Application Group when I select any group, I get the below error

  "error occurred beside Server during the processing of your application because of HSS or DB down"

  I checked my database of HSS that is in place and works perfectly well. Is attached to the screenshot for the same thing in my blog http://hyperion-consulting.blogspot.com

  Kindly help me in this regard.

  Kind regards

  AS

  Hi all

  Thank you very much for all your answers... I solved this problem. He comes to the end of the database. When we increased the temporary Table space... the question was solved...

• I had this error, "unable to install the application due to a certificate problem." What should I do now?

  What am I supposed to do when I get a message that says... "Sorry error occurred and... The application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the application author. I called Adobe and they have no help what so ever!

  Post edited by: Kevin Monahan

  Reason: the title was too long

  This problem occurs when an old version of Adobe Story is already installed on a system.

  To resolve this problem, you must first remove this version and then install the most recent.

  Now depending on what system you use, are the steps:

  MAC:

  • Open the "Applications" folder in Finder.
  • Move the application 'Adobe Story' to the trash and remove too much Trash.
  • Just to make sure that this application is not installed on a different drive, do a search for 'Adobe Story' in the spotlight. If it is present on a different location, then remove it from there too.
  • Now connect you to story.adobe.com and download the desktop application again and install it.

  WINDOWS:

  • Open the control panel and uninstall the Adobe Story app
  • Now connect to story.adobe.com and download the desktop application again and install it

• Unable to remove the application from planning 11.1.2.2

  Hi all
  
  
  
  I've removed the Hyperion of EPMA Application Library howerver Planning Application when I click on Navigate-> applications-planning of the workspace, I am still able to see the application of planning that I deleted applications EPMA library. How to completely remove the Planning Application.
  
  Kindly help me.
  
  
  Kind regards
  AS

  If you have restarted the service, and it is always the same then you will need to manually delete the app, have a read of planning 11.1.1.3 - manually remove a classic Application

  Or if you can still you connect to planning app, then you might try conversion classic back and then delete. To convert back to classic go to manage properties under Administration: EDIT_DIM_ENABLED = TRUE
  Restart the services, go to the planning administration and remove the app

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Unable to show the Premiere Elements on my second monitor (attached to my laptop)

  No "playback settings" option is available under the project settings (which seems to be the way to solve this problem?) Any suggestions would be greatly appreciated. Thank you!

  laurelgr

  I just looked at what you call for your 12 items first on Windows 7 Professional.

  In my case, I used first elements 12 computer portable 64-bit Windows 8.1.

  Independent of first 12 elements, the control panel screen offered 4 choices

  1 duplicate these screens

  2. extend these screens

  3. show the office only on 1

  4 show the desktop only on 2

  There is no problem with "duplicate these screens" except Monitor 2 had full-screen contrast monitor 1. At this point, not adjustable. It was the case that Premiere Elements was involved or not involved. And, I do not see this choice as useful for the feature limited the first elements 12 function Menu/Dual Monitor window. You end up with each monitor showing the editing with no. Panel where to go.

  Now if you select extend these displays, this probably is more designed for the function of first elements dual monitor. You get two monitors, each mode display full screen. However, the 2A monitor only the taskbar at the bottom of the screen of the monitor. For more information about the function of dual monitor of Premiere Elements, please refer to the

  First Elements ATR troubleshooting: PE11: concerns Workflow bi-ecrans

  Please review and then we can discuss it further.

  If the feature you're looking for isn't here for you in the first 12 items, please do not forget to get your money in money of day 30 Adobe if you bought the product from Adobe.

  We will be watching for further developments.

  Thank you.

  RTA

• Unable to show the Audit trail

  Hey all,.
  
  I try to turn on the display of the Audit trail for a user. But here's what I've done so far:
  
  1. remove the check mark from the Web Client and dedicated customer
  
  2. After you make these changes I have restarted the services
  
  3 - I took the name of view and added to the responsibility of the user
  
  When you perform these steps the screen of the Audit trail is not always visible to the user. Can someone help me please?
  
  
  Kind regards

  Harnois,

  If it is specific to the Service request screen. Then you can try the following:

  Go to the Admin - responsibilities: choose the primary responsibility of the user. Then select the page "Tab Layout" below.

  Then look for the name of the Application you are using (for example. Services financiers Siebel)

  The tab of the screen layout, select the Service, and the query for the "Audit trail" in the below «See tab Layout»

  Check if the "Hide" option is selected or not.

  Kind regards
  Joseph