Unable to start the rotor or the topic VoiceOver command

Similar Questions

• Need help message' w/error Unable to start the s window media Interface. Make sure you have at least WMP10. »

  I downloaded WMP11 to download another program and I get this message ("unable to start the s window media Interface. Make sure you have at least WMP10. »).  This message appears when I click on the new program and it loads.  As soon as it loads the first program screen appears and displays this error message on WMP 10.  When I click ok it goes, but I can't get the new program to do anything.

  So before asking on the problem of new program, I would like to fix this so it keeps popping up.
  I'm not too calculates saavy so I need clarification.

  Thank you

  Where did you downloaded WMP 11?

  Uninstall WMP 11 and check again the issue. If it stops then reinstall WMP 11.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163

• Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Hi julesmom,

  Please reset the Bridge preferences and then try it.

  Measures

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  ~ Mohit

• Unable to start the virtual machine after restoration

  Guests including Test host: ESXi 5.1.0.1065491

  Vm problem: 32-bit, Server 2003

  I use Veeam Backup & Restore 6.5 to back up my vm.  I always do a test restore to ensure that my backups are good.  I'm having a problem with a restore.  The 32-bit Server 2003 vm starts just fine on the main host it runs on.  All the vm are 64-bit except for one who is a 32-bit Server 2003 vm.  Restoring the machine virtual and implemented on a host except the 32-Bit vm Server 2003 test.  After restoration and trying power to the top, I get the following error:

  Unable to start the virtual machine.

  Turn on VPCM module has failed.

  Viewed performance counters require version 3 or greater of architectural performance monitoring.

  Anyone know if there is a fix for this problem?

  TIA,

  Mux

  I assume you are using different hardware (CPUs, the BIOS settings) for VMS restored!

  The virtual machine has VPCM enabled, which causes the problem. You can either disable it in vSphere Web Client (you can do this in the vSphere Client Windows), or directly modify the .vmx VM by setting vpmc.enable to "FALSE".

  For how toggle this setting in the Web Client see allow virtual in the Web Client vSphere CPU Performance counters. If you want to edit the .vmx file manually, you need to delete/re-add the VM from the inventory or recharge (see http://kb.vmware.com/kb/1026043)

  André

• Unable to start the CD player Win2003 Server / removable on the virtual machine: VMware-8(Host: Win7)

  

  Hello

  I am unable to start Win 2003 Server CD disk / removable on a Virtual Machine (the two VMWare 6 and 8). The snap-snap-in error is attached. I have the right configuration of the BIOS to Boot priority, but is taking the PXE ROM option.

  Please help me.

  Thank you

  Remy

  Hello

  1. it doesn't matter that the 'connected' is checked which is normal. "Connect at power on" is important and must be checked that it is on the screenshot.

  2. now, change the "autodetect" option to point to your 'real' cdrom device (that this laptop has).

  3 If this does not convert your cdrom ISO image 2003 and load through the second option that says "use an iso image.

  4. If this still does not work there is only one possible "your 2003 cdrom is NOT bootable. The fact that it autoruns IN Win7 does not mean that is bootable. You should check by placing it in a different machine of cdrom, restart this computer, bios in order to boot from CDROM/DVD first and see if the change boots. If it does not start even from there then for sure this cd is NOT bootable. So, the important thing is to load the cd on time to start and not inside the operating system to work.

  5. try to download an iso of the trial of the internet windows Server 2003 and use that one to see what is happening.

  6. create a new virtual machine and try here or even better to try another machine with Workstation 8 and see what happens.

  7. it is no coincidence if the CD-ROM drive is not recognized within the virtual machine.

• Unable to start the RAC instance

  Hi all
  
  When you start the RAC instance on the first node, I get the following error and my database is not open.
  
  #######################################################################################
  SQL > startup
  ORACLE instance started.
  
  Total System Global Area 608174080 bytes
  Bytes of size 2058048 fixed
  255854784 variable size bytes
  343932928 of database buffers bytes
  Redo buffers 6328320 bytes
  Mounted database.
  ORA-00313: open failed for the members of the Group of newspapers wire 2 6
  ORA-00312: threads of 6 2 online newspaper: ' / u01/redo_groups/logSLVMRAC26.ora'
  ORA-27037: unable to get file status
  HP-UX-ia64 error: 2: no such file or directory
  Additional information: 3
  #######################################################################################
  
  The redolog file "/ u01/redo_groups/logSLVMRAC26.ora" has been created in the local disk for instance CARS 2 in the second node to the cluster 2 knots. Like that, I created redolog file ' / u01/redo_groups/logSLVMRAC15.ora ' by RAC example 1 in the first node in the localdisk. When to start the RAC 2 instance in the second node get similar error.
  
  #######################################################################################
  SQL > startup
  ORACLE instance started.
  
  Total System Global Area 608174080 bytes
  Bytes of size 2058048 fixed
  264243392 variable size bytes
  335544320 of database buffers bytes
  Redo buffers 6328320 bytes
  Mounted database.
  ORA-00313: open failed for the members of the Group 5 of the thread log 1
  ORA-00312: wire 5 1 online journal: ' / u01/redo_groups/logSLVMRAC15.ora'
  ORA-27037: unable to get file status
  HP-UX-ia64 error: 2: no such file or directory
  Additional information: 3
  #######################################################################################
  
  
  Have tried to remove this redogroups, I'm not able to remove these. I get this error.
  
  SQL > startup mount
  ORACLE instance started.
  
  Total System Global Area 608174080 bytes
  Bytes of size 2058048 fixed
  255854784 variable size bytes
  343932928 of database buffers bytes
  Redo buffers 6328320 bytes
  Mounted database.
  SQL >
  SQL > select * from v$ logfile;
  
  GROUP # STATUS TYPE
  ---------- ------- -------
  MEMBERS
  --------------------------------------------------------------------------------
  IS_
  ---
  2 ONLINE
  / dev/slvm_rac/rredo1_2
  NO.
  
  1 ONLINE
  / dev/slvm_rac/rredo1_1
  NO.
  
  GROUP # STATUS TYPE
  ---------- ------- -------
  MEMBERS
  --------------------------------------------------------------------------------
  IS_
  ---
  
  3 ONLINE
  / dev/slvm_rac/rredo2_1
  NO.
  
  4 BLAND ONLINE
  / dev/slvm_rac/rredo2_2
  
  GROUP # STATUS TYPE
  ---------- ------- -------
  MEMBERS
  --------------------------------------------------------------------------------
  IS_
  ---
  NO.
  
  5 ONLINE
  /U01/redo_groups/logSLVMRAC15.ora
  NO.
  
  6 ONLINE
  
  GROUP # STATUS TYPE
  ---------- ------- -------
  MEMBERS
  --------------------------------------------------------------------------------
  IS_
  ---
  /U01/redo_groups/logSLVMRAC26.ora
  NO.
  
  
  6 selected lines.
  SQL > alter database drop logfile Group 6
  2;
  alter database drop logfile Group 6
  *
  ERROR on line 1:
  ORA-01623: log 6 is the journal current for example slvmrac2 (thread 2) - can't remove
  ORA-00312: threads of 6 2 online newspaper: ' / u01/redo_groups/logSLVMRAC26.ora'
  
  Any help to get out of this problem or how to remove the roll forward group which is the newspaper online for the current instance.

  Well, then you have to reinstall both Redo Log files accessible from nodes.

• Unable to start the computer by using the power switch - y480

  Recently, I bought the Ideapad Y480.

  I could not start the computer using the power button. I had to use the oneKey recovery to start the computer and restart the system in the recovery menu to restart the computer.

  What should I do now?

  
  

• Unable to start the computer after the installation of Windows updates

  original title: same problem with the other oddities.

  I also have a computer down the update.  Although I tried several times to start the computer from the installation CD re, when I get to the page where I have options to fix or exit, locks from my computer to the top and will go no further.  Suggestions how to get the computer to boot the CD and allow me to choose the repair option without locking up?  Thank you!

  I finally managed to get the reinstallation CD to load.  I also spoke with telephone tech support at Microsoft who helped me to descend KB977165 my system.  After that was removed the computer booted without error.  By MS tech, I am also running the anti-virals and malicious programs to see if they detect all the other infections.

  Originally, the CD would load to the point of being able to choose between the options: continue to fix or exit.  At this point, the computer froze upwards and would not all repairs in order to remove KB977165.  Microsoft launches a call again tomorrow in order to install safety free bug so far.

  Thanks for your reply.

• Unable to start the computer - boots of BSOD

  Dell Dimension 210/9200c Windows XP Pro SP3 desktop

  Here's what I spent...

  Start-up, enter the admin password.

  Floppy drive seek failure

  Strike F1 key to continue, F2 to run the utility series

  If I choose the F1...

  Loading PBR for descripto 2... In fact.

  Playing a disc error has occurred

  Press CTRL + ALT + DELETE to restart

  I press CTRL + ALT + DEL and it leads to FAILURE to SEEK the FLOPPY DISKETTE.

  If I choose to F2, it goes to creating useful and I don't know what to try to change the problem.

  If I press F12 and go to the start menu...

  SafeMode to start the BSOD

  I tried to boot from the CD and use my recovery CD and the result was...

  Window, set up ran with the establishment is responsible (file exchange...), then he went up to the game starts windows.

  Here's what came...

  A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS SHUT DOWN TO PREVENT DAMAGE.

  IF IT IS THE FIRST TIME YOU'VE SEEN THIS STOP ERROR... RESTART YOUR COMPUTER

  CHECK FOR THE PRESENCE OF VIRUS.  REMOVE ANY NEWLY INSTALLED HARD DRIVES OR HARD DRIVE CONTROLLERS.

  CHECK THE DRIVE FOR THE CORRECT AND COMPLETE CONFIGURATION

  RUN CHKDSK/F TO CHECK FOR HARD DRIVE CORRUPTION, AND THEN RESTART

  TECHNICAL INFO:

  STOP: 0X0000007B (0XF78DA63C, 0XC0000034, 0X00000000, 0X00000000)

  I can't the system to start.  I haven't added hardware or software.  I think that the computer has restarted after downloading some updates, but I can't to start or restore system. What can I do?

  Yes, I can get to this screen.  After you have clicked on enter, it looks like this:

  SET UP WINDOWS

  __________________

  __________________

  downstairs "SET UP IS LOADING FILES (*)...

  Then it turns down in "SET UP START WINDOWS"

  Then, it goes straight to the BSOD.

  I tried several times and he always goes for the BSOD.

  In the menu Setup, I ran a hard drive diagnostic and it showed this:

  "RUNNING HARD DRIVE DIAGNOSTICS, PLEASE WAIT...

  DRIVE 0: ST3320620AS

  IN CASE OF FAILURE.  RETURN CODE: 7

  Is this to say that the HD is shot?

  Your hard drive may or may not be at fault. Error code 7 could mean just corrupted hard disk controllers. This could also be the reason for the bsod.

  Enter your bios and follow the instructions below.

  1. start-up (Dell logo), press F2 to enter the BIOS

  2. expand the section "readers".

  3. go in "SATA Operation."

  4 change that "RAID Auto/AHCI" to "RAID Auto / ATA.

  Furthermore, if your bios does not have this option simply switch from SATA IDE mode.

• Unable to start the system in xp sp3 after you download windows updates

  Cannot start the xp sp3 system after downloading windows updates.  I really need to be able to save the items that were on my desk.  system does not boot in safe mode or any other mode.  just keep trying to restart.  I do not see a blue flash screen by a fraction of a second.  Cannot read anything due to the short time.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/307545

  Check if that helps.

• Executable WMPLAYER disappeared? It is not Program Files/Win Med player. Unable to start the Player Wind Med?

  I use Windows XP Home Edition, version 2002, service Pack 2
  Windows Media Player 11 was running.
  Watch "Add / Remove Programs" the system thinks it is still installed and gives me the possibility to the United-insta Nations

  I recently loaded Acer edisplay management software for new Acer moniter purchased.
  I recently tried to load the adobe flash player, but he has not installed correctly.

  Usually after the put in a CD a dialog with Windows Media Player as one of the choices to play the CD.
  Windows Media Player is more a choice in the dialog box.

  The ICON is for Windows Media Player is no longer on the desktop. It's almost as if someone came in and uninstalled Windows Media Player.

  AJohnson

  Start the player from here:

  C:"%ProgramFiles%\Windows Media Player\wmplayer.exe and create a shortcut as well

• UNABLE TO START THE WINDOWS IN A SINGLE ATTEMPT CORRECTLY

  When start the computer dell logo comes after that microsoft corporation will appear for a while then led try glow in keyboard and mouse, suddenly not display with a light black background not driving no light on the mouse and the keyboard, CPU. I have to press the power button for 5seconds to stop and to restart the computer several times to start windows properly. Please someone help

  Hello

  And the good advice already rec'd, use these tests for diagnosis and troubleshooting of Dell.

  Reference Dell troubleshooting with startup problems:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_343119

  Run the built-in diagnostic software:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=266787

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And if you manage to fix or not to fix these problems, here's how to reinstall with a Dell with Vista if ever necessary.

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  And if this does not resolve your problem, please contact Dell or their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Error message states that Windows cannot read the Service Notification of system events. Unable to start the computer.

  Original title: System Event Notification Service does not connect.

  Computer will not start.  Error message states that Windows cannot read the Service Notification of system events.

  Hi DACL.

  ·        What is the full error you receive when you try to start the machine?

  ·        You did it all change hardware or software on your machine before this problem?

  You can restore the system to the Windows recovery environment and check if you are able to boot to the desktop. Follow the steps in this link to boot into the Windows recovery environment and select the system restore option.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Repairs to the system of Windows recovery environment

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Visual studio 2008 error message"unable to start the program C\user\...\debug\example14.exe" the system cannot find the specified folder

  im working on a project in visual studio 2008, and once I hit the compilation does his usual thing and then all of a sudden I get the error message

  Cannot start the program (file location)

  the system cannot find the specified file

  I tried to install other UN and re install visual but without success

  Help, please!

  Repost nicely in the Forums on the link below:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vsarch, vsdbg, vstest, vstfs, vsdata, vsappdev, visualbasic, visualcsharp, end

  Visual Studio General forums

  They will help you in the Forums above.

  See you soon.

  Discuss programming techniques, best practices and development issues for all versions of Visual Studio.

  Mick Murphy - Microsoft partner

• Error: "unable to start the service Object Push Profile (OBEX OPP)" when trying to transfer files from the Android phone via bluetooth

  Original title: Android mobile phone via bluetooth, I get an error on my phone.

  When I try to send a file by my Android phone to my laptop via bluetooth, I get an error on my phone saying "cannot start service Object Push Profile (OBEX OPP)". Reason: The return value is "false", but I can send files from my laptop to my phone OK.

  Hi steve3624,

  We recommend to check if there is no parameter which must be activated on your phone, then try to transfer the file to your laptop.

  We also advise to check if there are any service name Object Push Profile and start it. To do this, try the following steps:
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, locate Object Push Profile service and double-click it.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click ok to apply the changes.

  For further assistance, please get in touch with the assistance of the Android team.

  Visit our Microsoft answers feedback Forum and let us know what you think.