Unable to start Vista, perhaps in connection with the event ID 3004?

Similar Questions

• BT question perhaps in connection with the recovery disk

  I formatted my A100 without using the second recovery disk. System seems stable, but I can't use BT, I tried to install the monitor BT, BT Stack, pilots, but still can not.
  Someone knows something about it?

  Hello

  If your laptop is BT on board all the necessary software is included in the recovery image.
  All you need to do is put the WLAN switch on IT (the WLAN led will be ON) and the combination of keys after you have made this BT activate using FN + F8.

  The BT hardware installation should begin. Just follow the menu on the screen and complete the BT installation. When finished, you will be able to use BT. in the future please make sure that the BT is enabled with the FN + F8 key combination.

• Unable to connect with the Mac computer?

  Unable to connect with the Mac computer?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  Hello

  Be sure to follow the instructions in this article to support > set up your Apple TV (4th generation) - Apple supported

• Unable to connect with the PC tab

  I bought a Ubislate android 7 C + from Datawind, but unable to connect with the computer

  Burnersalvation,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. what happens when you try to connect to the tab?

  3. How do you connect tab to the computer?

  To connect to Android Ubislate to the computer, it may require some software to install on the computer provided by the manufacturer of the tab. Then I suggest you to contact the manufacturer of the tab to get help on this issue.

  Check out the link:

  http://www.ubislate.com/contact/index.html

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• I can connect with the Administrators account without starting windows in safe mode in win xp pro sp3

  I can connect with the Administrators account without starting windows in safe mode and if yes, how?

  If I ca not, how can I load the graphics in safe mode drivers as all graphical interfaces are not displayed correctly.

  Thank you, Andre

  If XP Pro using the Welcome screen, press CTRL + ALT + DELETE to bring up the classic login box.  In the connection box, type the administrator user name and password. Boulder computer Maven
  Most Microsoft Valuable Professional

• Vista not recognize / connect with any Bluetooth device

  Vista not recognize / connect with any Bluetooth device. I have the Bluetooth dongle into a good usb port, the computer recognizes it, but it doesn't show up

  Bluetooth devices when the device will attempt to connect.

  Is that what you would please stand out my answer as the answer to your problem.

  Marked as answer questions don't get a lot of people looking at them.

  Sorry that he had not helped you.

  Once you disable the my answer option, others will look at your problem and we hope to help you.

  See you soon.

• Unable to connect with the listening port of the client

  [oracle@rac31 ~] $ lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on March 21, 2014 03:33:30

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date March 20, 2014 13:33:30

  Uptime 0 days 13 hours 59 minutes 59 seconds

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/rac31/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.1.101) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.1.111) (PORT = 1521)))

  Summary of services...

  Service '+ ASM' a 1 instance (s).

  Instance '+ ASM1' READY State, has 1 operation for this service...

  'Cars' service has 1 instance (s).

  Instance "rac1" READY State, has 1 operation for this service...

  Service 'racXDB' has 1 instance (s).

  Instance "rac1" READY State, has 1 operation for this service...

  The command completed successfully

  In my server in the Oracle_HOME/network/admin

  This is my entry in tnsnames.ora

  RAC =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac-scan)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rac)

  )

  )

  I am able to connect with the command

  sqlplus system/password@rac

  However, when I give the same input on the client computer

  It does not work

  I am able to ping the host rac-scan successfully

  C:\Users\rgehi > ping rac-scan

  Ping rac - scan.oracle.com [192.168.1.113] with 32 bytes of data:

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Ping statistics for 192.168.1.113:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 0ms, Maximum = 0ms, average = 0ms

  C:\Users\rgehi > sqlplus system/password@rac

  SQL * more: Production of the version 12.1.0.1.0 Fri Mar 21 03:40:53 2014

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  ERROR:

  ORA-12545: Connect failed because target host or object does not exist

  I installed oracle client on my desktop

  and I made entries in the tnsnames file

  However when I connect to the database to rac with scan it works sometimes...

  not always...

  so I'm in search mode and finally, after many moons a lot and light years away, I found the following

  Here's what I did

  # - scan

  192.168.0.127 rac31 - scan.oracle.com rac31-scan

  192.168.0.128 rac31 - scan.oracle.com rac31-scan

  192.168.0.129 rac31 - scan.oracle.com rac31-scan

  I put three ip addresses in the host with the same name rac31-scan file

  then I put the same ip addresses in my windows hosts file

  Here are the entries

  192.168.0.127 rac31 - scan.oracle.comrac31-scan

  192.168.0.128 rac31 - scan.oracle.com rac31-scan

  192.168.0.129 rac31 - scan.oracle.com rac31-scan

  but in the (windows 7 pc) client tnsnames file has just one entry

  It's here

  RAC1 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac31-scan)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = RAC)

  )

  )

  and now when I connect from the client... it connects without any problems.

  I have tried more than 10 attempts without problem

  BINGO!

• WARNING: Unable to update the preferences of the user has failed to establish a connection with the server of history. Service could be down. Please try again later.

  Error when you try to import

  WARNING: Unable to update the preferences of the user

  Cannot establish a connection with the server of history. Service could be down. Please try again later.

  Can you please try again? Please let us know if you still experience this issue.

• Unable to connect with the MIFI device.

  I have a Verizon Jetpack 890 L mifi device and an older model Dell laptop that is wireless. After spending two hours on the phone with Verizon, finally got the correct IP address for the device to 'connect' with the computer. The States of the computer it is connected to the device, but the device shows that it of just nothing connected to it, have tested the device with a phone and the Xbox and the two front showed connected and functioning with the device. But the computer does not connect to the internet. Help, please!

  The message "the network password needs to be 40bits or 104bits depending on your network configuration. "This may be criteria such as 5 or 13 ascii characters or 10 or 26 hexadecimal characters" means that the system used encryption is WEP (instead of WPA or WPA2).  Although it is the lowest available wireless security, now that I think about it, I'm a little surprised that the mifi comes with a wireless security is enabled.

  There are at least 3 different "passwords" potentially used by your device.

  1. There may be a password that allows the device to connect to cellular service.  As far as I can tell from the manual, it is a "PIN code" that may or may not be required by your cell carrier (i.e., Verizon).  See page 15.

  2. There is a password that gets access to the configuration of the mifi utility.  This is the password that is supposed to be printed on the back of the mifi AND displayed on the LCD when the mifi is turned on.

  3. There may be a password for encryption (or "network key") wireless as the wireless mifi and your computer is configured to use WEP, WPA or WPA2.

  The more I read the manual for this device, I am convinced that the default setting for wireless encryption is 'None' and the password on the back of the device #2 above.  On the other hand, I can't imagine how he could have set himself up for the WEP encryption.

  Here are my latest suggestions.

  1 reset the mifi to factory default.  Beside the decision-making when the power cord is connected is a small button.  With the power on, press and hold this button. The manual says only: "hold."  I would like to keep the button pressed for at least 20 seconds or until there is some indication on the screen that a reset has occurred. You will need a unfolded paperclip to press the button. See http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=50011#alt

  2. make sure that the battery is fully charged.

  3. turn on and confirm that the connection ('up' and 'arrows'), (e.g., 4 G LTE) service and the strength of the signal (bars) are turned on:

  

  4 wait about 10 seconds and then go to "View available wireless networks," find the one that matches your mifi (check to make sure that you do not have a neighbor with a mifi with a similar SSID) and click on connect.  You should NOT be asked for a password.

  5. open a web browser and enter the address 192.168.1.1 OR vz.hotspot in the address box and click GO.  You should see the following text:

  

  6. Enter the password of the sticker on the back of the mifi in the box and click on the button "Login".

  From there, you can follow the manual to configure wireless security settings.  Good luck.

• Why Vista will not connect to the internet wherever I'm connected with my XP machine?

  Why my computer won't get online wherever I like Xp only

  Why Vista will not connect to the internet wherever I am?  I thought what to see that there is a link to a site to repair this, but when I found the site the link had disappeared.  Thank you

  Hello

  1 are you facing issue while trying to connect to public Wi - Fi hotspots or private home network?

  2 have you tried all of the suggestions of Fahimulla K?

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Does not connect with the e-mail server after update.

  Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

  I use Thunderbird version 38.1.0.

  Thank you.

  The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

  Until the next problem...

• Satellite M30X-129 loses connectivity with the external USB device

  I have a problem with my laptop that has regularly been do worse and I can handle is no longer!

  Whenever I work with external devices via USB ports (all kinds of devices but my external hard drive Smartdisk CrossFire and my iPod in particular), after a certain period of time (sometimes minutes, sometimes hours) the laptop loses connectivity with the device.

  If happens to be listening to the music, download photos from a camera or laptop computer for the ' net or sync of the iPod, the connection is cut off, turning off the device and I have to start all over again!

  I'm almost at the point of launch of the laptop by the window, so any help is most welcome.
  Thank you
  Abderrahman

  Hello

  This happens also with the external USB mouse?
  This occurs if the power adapter is plugged or only if the laptop running on battery?

  In-hubs properties > Device Manager USB root-> power management
  You will find the option called allow the computer to turn off this device to save power.

  I would recommend the brand and disable this option.

  Maybe it helps.

  By the way; When do you update the operating system? I think that it s there long time, perhaps some system files or registry entries are corrupted or a 3rd party application affect the USB functionality?

• Wireless network connection is connected with the strong signal, but stops working at random times

  Original title: internet says is connected with the strong signal, but stops working at random times?

  Hello
  For the last few weeks, I had problems with my internet connection. Wireless connections say I am connected and have the strength of the excellent signal. I know that this is not an ISP problem because my other computer works fine. I will be reviewed fine and then all of a sudden, the site doesn't load any more, although I'm always connected to the internet. This happens on Firefox and Internet Explorer, this isn't a browser issue.

  I read other offered on the internet and tried all, but nothing has changed. I have checked proxies, disabled antivirus and installed new, checked firewall, ran a check for malware, etc..

  Any help will be much appreciated because it becomes very frustrating to have to keep reconnected my internet when he says he's working.

  Hello

  I suggest you follow the links below and check them with the question:

  Method 1:

  Step 1:

  Start your computer in safe mode with network and check the number: http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Step 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  Uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters, and then click on uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  For reference:

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  I hope this helps.

• Connected with the temporary profile "I can't access all the windows apps or my personal files.

  OT: Connected with the temporary profile.

  When I log on my ASUS laptop, I tells me that I am being logged on with a temporary profile.  I can't access windows applications or my personal files.  It started after my laptop suddenly stopped while on internet explore.  According to the event log, event ID 4608 created a change of security status and it is logged when LSASS. EXE starts and the audit system is being initialized.  Is there anyway to stop this temporary profile/access and return to normal use?

  Many things in Windows Vista and Windows 7 is still applicable to Windows 8.

  Difficulty of a corrupted user profile

  http://mywindows8.org/fix-corrupt-profile-in-Windows-8/