Unable to turn computer and Windows 7 updates

Similar Questions

• Unable to turn on the window Defender, even after that I click on activate the defender of the window. THA page with the tool does not appear...

  Unable to turn on the window Defender, even after that I click on activate the defender of the window on my window vista home premium... The page with the tool does not appear...

  If you have
  one of the following AV, antivirus, programs installed, it will stop your
  Windows Defender. Purpose of these AVs have their own advocates. 2 defenders
  on the same machine will create conflicts.
  Bottom line: it's ok.
  It's normal.
  List of AVs which will stop Windows Defender

  Norton
  McAfee
  AVG
  Microsoft Security
  Essentials

  If you do not have the
  above AV programs, here's how to do to restart Windows Defender:

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows
  Defender > click Properties > to
  Startup type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• If I buy a person's computer and windows is registered in their name can I have register it in my name with the OEM for windows

  If I buy a person's computer and windows is registered in their name can I have register it in my name with the OEM for windows

  If I read your question correctly, this article should solve your problem for you:

  "How to change name and company information after you install Windows XP"
    <>http://support.Microsoft.com/kb/310441 >

  HTH,
  JW

• My update of windows just 'turns' forever and gets no update for may 2016 - convenience store does the same thing

  Any suggestions?

  Yes.

  Windows 7 update problems? First read this.

  :)

• Down computer after windows XP updated today

  Hello!
  I hope someone can help me.
  This afternoon a microsoft XP update came through on my computer and they said should be restart to take effect. I opened outlook and the internet. I said that I should restart later.
  The computer then froze and perhaps rather looking forward I turned it off after that it does meet.
  It will now not start upward and from the beginning he just tells me to choose the safe mode option, (with netweoking & compant promt, last known good configuration and finally start normally.)
  I went through each of these options, but none works and it keeps just bike around every 30 seconds in the same.
  I tried to put my Windows disk in and start one and it tells me that there is no hard drive :(
  What happened and can anyone suggest what I could do?
  I am a teacher and I have all my files on the computer that are not saved :(:(
  Thanks in advance
  Ruth

  Hi JoeRuth,

  Thanks for posting. If after you insert your Windows XP disc you still do not see the hard drive there are chances that you have hardware failure any. To backup your data, I would recommend if you are uncomfortable or you know someone who is comfortable with the computer hardware, remove the disc and by adding it as a secondary drive to a different PC with a Windows installation already in place. This will allow you to browse and backup your files if your hard drive still works.

  After your files are backed up, then you should try to do a repair on the operating system installation if your hard drive is detected. If your hard drive is still not detected and you have no RAID volume or unrecognized SATA jury, you will have to buy a new hard drive and install a new OS. As with any hardware problems, if your computer is an OEM I highly recommend that do you to troubleshoot and perform diagnostics before making replacements.

  I hope this helps. Please let us know if you have any questions. Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Conflict between the settings of the computer and Windows Live Mail

  I have a conflict between my computer settings, Windows Live Mail and Windows Live Hotmail/Calendar.  When the computers ' regional and Language Options | Date - short Date Format"settings are set to"dd-MMM-yy"is in conflict with the Windows Live Mail and Windows Live Hotmail/Calendar 'date of birth and birthday' date formats.  Whenever a date is placed in the Windows Live Mail "birth date and birthday" field the date in the field becomes "mm/dd/yy" which generates a conflict in date format.  Enter "mm/dd/yyyy" in the date field of "birth date and birthday" in Windows Live Mail when your computer settings are set to "dd-MMM-yy" and Windows Live Mail passes the numbers 'mm and JJ '.  Is there a solution?  I'd like to see dd-MMM-yy on my computer.
   
  Also why Windows Live Mail and Windows Live Hotmail contact list different?  In Windows Live Mail, you can enter a "anniversary date" but not in Windows Live Hotmail contacts list!

  WinXP all updates, WLM 2009 v14

  Thank you

  WWHOAWM (Dan)

  Live and Hotmail queries to the appropriate here forum:

  Windows Live Solution Center
  http://windowslivehelp.com/

• Windows XP and Windows Vista updates-updates to update changes the two? __Updates is the Vista mess up to my desktop (Windows XP)

  I tried to update Internet Explorer 7 to IE 8 in Windows Vista (wireless), but when I do it will also update my Windows XP to IE 8. Windows XP can't handle the update and it mess.
  Why is that when I do updates on my wireless laptop my office is also updated?

  Hello Internet Explorer 8 is compatible with Windows Vista and Windows 7. Updates usually for IE8 are pushed for Vista and XP at the same time.

  Can you provide us with information as to what is happening exactly? You receive error messages?

  Let us know,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System volume information stolen hard drive. VERY slow computer and windows show only (not answer) for 2 to 10 seconds at a time. Help, please.

  After starting my computer to Windows 7 Enterprise, I noticed that it runs very slowly.  for example, the scrolling of a window of firefox crashes every 10 seconds or more.  The gel lasts between 2 and 10 seconds with the little blue wheel, spinning, (not answer) in the toolbar.

  I pulled the top of resource monitor and to see that 4 PID - C:\System Volume Information\ {guid} {guid} is running non-stop with about 720ko read by writing dry and 6 MB per second Disk 0 length of the queue is pegged at 5.  from time to time (once every 10 to 15 minutes), the queue goes to 0 and the computer starts acting normally (i.e. fast) again.  But once the length of the queue points to 5, the problems continue.

  I am running in raid 5.

  I noticed that vssvc.exe is running (PID 4144) with a reference to c:\System Volume Information and the same GUID as PID 4 - system and kernel.

  Any idea what I can do to get back on my computer?  At this point, it is absolutely unusable.

  Thank you

  Marshall

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect computer with Windows 7 operating system to XP Home network

  I have a home network cable, put in place with the primary being my XP computer. All other computers on the network are working perfectly, but since the purchase of a new computer with Windows 7 OS, I could not connect the new computer to my network.

  Any help is appreciated!

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads

  Connect to the Internet, a host group and e-mail.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• new computer and windows disk install problem

  I bought a new processor MB ram graphics card components but I left my ssd drive and there is a problem... when I tried to install windows, it told me my MBR disk and must be TPG to install windows... but I don't have windows on my SSD because I did the format of this drive... Pls tell me how I can install windows on this drive.

  Hi Kelly,

  This could be due to the fact that the partition may have changed for the hard drive.

  I suggest you to connect the hard drive to a working computer and then convert the partition to the disk GUID partition table format.

  Follow the steps for a computer of Windows 8:

  (a) save or transfer the data to the MBR basic disk (MBR) record that you want to convert into a disk GUID partition table (GPT). If the disc does not contain any partitions or volumes, go to the next step.

  (b) press the Windows and X key, then select disk management.

  (c) if the disk contains no partitions or volumes, go to the next step. Otherwise, click on all volumes on the disk and then click Delete Partition or Delete the Volume.

  (d) right click on the MBR disk that you want to change into a GPT disk and then click convert to GPT disk.

  For reference, you can check the link:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/gg463525.aspx

  Please let us know if you have more queries on Windows.

• Updated Windows rebooted my computer and installed the updates last night and now my login password is different and I can not connect. Help?

  I put my computer to sleep last night and when I woke up this morning it has restarted and was sitting on the login screen.  This occurs when windows update itself - and I absolutely hate it by the way.

  When I entered my password, it says that it was incorrect.  I had the same password for a long time, so the only thing I can think is that the update of windows somehow changed my password.  I have Vista Ultimate 64 b.

  I did not create a password recovery disk - how can I get my account to change my password?

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• error code Windows xp update {KB975558} 0x8007F01E and windows xp update {KB2481109} code 0x8007F0F4 wont install on my computer error

  IM no computer brain don't know what you're talking about

  Hi James,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you have problems installing updates.

  The problem may occur due to incorrect parameters with Microsoft Installer logging.

  Perform operations from the links below and see if it helps.

  You cannot install some programs or updates

  You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  Hope this information helps.

  Answer to us if you have problems with Windows Update or any other issue of Windows, and we would be happy to help you.

  Good day!

• Brand new computer and Windows Update offers updates of pilot

  I received a custom build e9280t yesterday and did the thing of the installation and migration.  Windows Update offers already updates for the ATI Radeon HD 4850 video card and JMicron JMB36X controller.  I guess I have several questions.

  1 can I install drivers provided by Windows Update

  2 How often should I update drivers?

  3. in the case of the video card should I update from Windows Update or ATI?

  4. If I install ATI should I install the ' ATI Catalyst™ 9.11 Suite for Windows 7 (64 bit) "or simply thedriver only option of the ATI Catalyst™ 9.11 components for Windows 7 (64 bit)?

  I have a card ATI video in a long time and the outcome of pilot and the options have always confused me with what must be downloaded and installed.

  Thanks for any help.

  John181818 wrote:

  I received a custom build e9280t yesterday and did the thing of the installation and migration.  Windows Update offers already updates for the ATI Radeon HD 4850 video card and JMicron JMB36X controller.  I guess I have several questions.

  1 can I install drivers provided by Windows Update

  2 How often should I update drivers?

  3. in the case of the video card should I update from Windows Update or ATI?

  4. If I install ATI should I install the ' ATI Catalyst™ 9.11 Suite for Windows 7 (64 bit) "or simply thedriver only option of the ATI Catalyst™ 9.11 components for Windows 7 (64 bit)?

  I have a card ATI video in a long time and the outcome of pilot and the options have always confused me with what must be downloaded and installed.

  Thanks for any help.

  John, here are the answers to your questions:

  (1) Yes, I would.  I wonder however, no offer to update your BIOS before checking further.  Updated HP has been known to be incorrect.  A failed BIOS flash makes it an expensive boat anchor.

  (2) update as soon as there is a new driver.  Manufacturers use updates to fix problems.

  (3) it's up to you.  I don't think that HP makes changes of owners of the video cards in their computers.  So, if it were me, I would use those ATI/AMD.

  (4) go with the 'Software Suite '.  This includes some cool utilities to adjust your map.  One of the features that I like is "Overdrive".  It allows you to overclock the card and adjust the speed of the fan on the fly.  I'm still using XP Pro SP3, but the last consequence works very well with my 4870 XXX 1 GB.

  I hope this info is useful.

• Itunes and Windows 7 update problems

  Well, I have a question for all of you who are technically gifted with computers.

  About two years my automatic updates for Windows 7 (64-bit SP1) has stopped working. Whenever I shut the computer down it would try to fail to install 40 of updates. I contacted Microsoft Tech that had me working with a level one and level 2 tech with no luck. In the end, I made the decision (finally not wise) just turn off updates.

  Fast forward to today. I tried to buy something from iTunes, but because my current iTunes was so far out of date (I rarely bother the upgrade whenever he asks) it did not work. No problem, I just downloaded the upgrade. Anyway, the installation failed, and now my iTunes does not... After digging a bit it seems that it's because Windows has not been updated in so long. As concise as possible here is what I tried so far;

  1. When iTunes was not installed it is because of the Apple Application do not install it. Everything else seems to be loaded to the right computer. So I extracted the installation individually with WinRar files and tried to install just the Apple Application (64 bit) only. But this does not work, when installing, I get the message;

  An error occurred during the installation of assembly ' policy.8.0.Microsoft.VC80.CRT, type = 'win32-policy', version = '8.0.50727.6195", publicKeyToken ="1fc8b3b9a1e8e3b", processorArchitecture ="amd64 ". See Help and support for more information. EDH...

  It is at this time that I read online that people with my problem followed it back to the question of the Windows updates;

  2. I ran a scan disk error checking, run a total of three times, once to automatically challenge errors, then back to search for and attempt recovery of bad sectors, and then a third time on the two while in safe mode. No luck. When I try and update Windows manually screen just sits there with the Green infinite loading bar.

  3. I ran sfc/scannow in cmd in normal and safe mode, once again, no change.

  4. I tried to install the Windows Update Standalone (I guess reinstalling the actual update of the program, rises like fix for Windows KB947821) it just sits there once the installation starts and will not be finished.

  5. I tried to clear the cache for the update, enter services, stopping the Background Intelligence Transfer Service and update of Windows and then delete all the files in the update, this at least reset the updater, then when I tried to download the updates again, I got an error (can't remember what it was, but it started with an "eight") and then some so I came back to the Green loading bar of doom...

  6. I also tried to run this Reset_Windows_Update_History.bat in a command prompt, but it did nothing.

  7. He was also something else that I tried to run in a command prompt to a forum, but that no longer works.

  I've probably tried a few other things too... I just want to get my iTunes works again, my laptop is almost eight years old, so I don't have the Windows CD to reinstall it, and I don't want to 'upgrade' to another windows program. Suggestions/alternatives?

  Thank you!

  Hi Petedln,

  It seems that you already do all troubleshooting steps for your concern.

  You can also do the following:

  1. Run the System Update Readiness Tool.
  2. Clean boot the computer.

  If the problem persists, try to create another user profile, and run Windows update from there.

  Let us know how it goes.

  Kind regards.

• using the computer and windows xp professional will only work in safe mode.

  After a windows update from one day to the next on 4/4/windows had restarted in safe mode.  Have tried everything I can, but is still unable to operate in something else than to safe mode.

  Hi Grandma fla,.

  Please describe what is happening when you try to start the computer in normal mode. Please provide the exact error message received, if any. Alternatively, you can perform a System Restore Mode without failure.