Unable to turn on the services of windows (marked red) Security Center

Similar Questions

• EliteBook 8560p: unable to turn on Mobile Broadband - 10 Windows

  Hello

  So I made the big jump yesterday of 8.1 Windows of Windows 10. Do this jump however gave me a headached major when it comes to using my built-in mobile broadband.  Properly installed device drivers however I am unable to turn on the device to Windows 10.  I had a similar problem on the Windows 8.1 but I then installed HP Connection Manager, and then I could turn on and off the unit.

  With HP Connection Manager not supported on Windows 10, is there another way I can get get this device to turn on so that I can use.

  I solved my problem.

  Before moving to Windows 10 I had installed HP Connection Manager on Windows 8.1.  During the upgrade, I thought that HP Connection Manager has been removed from the machine, as it is incompatible and not appearing is not in programs and features. The attempt to run the HPCM.msi file I had the option to modify, repair, or uninstall if I choose one of these options, I get a message indicating that the application was blocked.  It then struck me that HPCM was still installed and it had locked my device to the OFF state.

  I downloaded Revo uninstall the application and was able to successfully remove HPCM. Once removed, I could use my device natively through Windows 10.

  I hope this post helps the other.

• Unable to turn on the window Defender, even after that I click on activate the defender of the window. THA page with the tool does not appear...

  Unable to turn on the window Defender, even after that I click on activate the defender of the window on my window vista home premium... The page with the tool does not appear...

  If you have
  one of the following AV, antivirus, programs installed, it will stop your
  Windows Defender. Purpose of these AVs have their own advocates. 2 defenders
  on the same machine will create conflicts.
  Bottom line: it's ok.
  It's normal.
  List of AVs which will stop Windows Defender

  Norton
  McAfee
  AVG
  Microsoft Security
  Essentials

  If you do not have the
  above AV programs, here's how to do to restart Windows Defender:

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows
  Defender > click Properties > to
  Startup type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• My weather Gadget says "unable to connect to the service. I use this gadget for years and it does not work.

  I use Windows 7 Enterprise and since the beginning of February this year (2015) my weather Gadgets stop working, they first show the forecast and now they are showing a message "unable to connect to the service. Is there a problem with the gadget?

  Everyone!

  I recommend this link with more instructions and information on how to solve this problem of wwcc1 and his post on 2015-Feb 5: here

• Unable to turn off the Magnifier in Win7

  original title: I made every effort using all the instructions I can find to turn off the Magnifier in Win7 and none of them worked.

  I'm unable to turn off the Magnifier in Win7 and asked help available to all sources known to me. I was told to use the ease of access and uncheck Mgnifier.

  Because it did not work.
  Then I tried to use settings in the mouse - did not work.  And there are other approaches - none worked!
  I guess the Magnifier is useful for some, but for me, it's a major nuisance and I would definitely find an approach that would disable it permanently...
  E-mail address is removed from the privacy *.

  I'm curious now. Do you want to say its always active and cannot be turned off, or it appears now and again when you don't want or need?

  Maybe these posts can help?

  http://forums.techarena.in/operating-systems/1356073.htm

  and

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/how-do-i-disable-the-Windows-7-Magnifier/409861dd-c0c5-4D64-AAEC-fb42f23647b7

  or

  http://www.SevenForums.com/general-discussion/38253-removal-Magnifier-Win7.html

  Seems to be a couple of possible ideas in each. My apologies if you have already found them.

• Weather gadget issue, error: ' unable to connect to the service.

  Original title: weather gadget problem

  I am running Windows 7 and I'm trying to change the weather gadget in my city.  I typed in my zip code, it recognizes it, but says "unable to connect to the service.

  Until I received this suggestion I solved the problem by uninstalling the weather gadget and download another.  He worked after doing this.  I checked the regional and Language Options, and they match.

  Thank you.

• I get an error, "Unable to connect to the Service of system event Notification service" on the computer.

  Original title: unable to connect to a service of windowns

  I had this problem! "Unable to connect to the Service of system event Notification service. This problem prevents standard users to log on to the system. As long as administrator, you can go through the system event log to see why the service did not respond"how to solve?

  Hello

  Thanks for posting this question in the Microsoft Community.

  From your post, it seems that you can not connect to a windows service.

  When you receive this error?

  Check if the Service Notification of system events is running or not. To check the services

  a. click on start.

  b. in the start search box, type "Services".

  c. click right on - RUN AS ADMIN

  Check if the below mentioned, service was mentioned State and type start.

  System Event Notification Service started automatically

  Go back with the details so that we can help you better.

• MY WEATHER GADGET IS NOT WORKING.IT SHOWS "UNABLE TO CONNECT TO THE SERVICE.

  Original title: WEATHER GADGET

  MY WEATHER GADGET IS NOT WORKING.IT SHOWS "UNABLE TO CONNECT TO THE SERVICE. I TRIED TO CHANGE THE LOCATION, BUT IT IS OF NO USE. PLEASE HELP ME SOMEONE.

  When you click Download and install, click on save, not run and save it to the desktop. It will be a Zip file which you right click | Extract all.

• Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!

  Please help me! ....
  Audio service does not
  I tried Services.msc and tried starting windows Audio...
  The following error has come!
  Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!
  There is a sign of X in the audio icon...
  and when I click on this audio icon... TROUBLESHOOTER OPENS...
  all this happened all of a sudden!
  Please help me!
  Thank you.
  Nischal Sp

  Please provide the error screenshot more better assitance. Also, try this:

  Try to copy and merge the audio from another Windows 8 or better service.

  You can do this by going to the Registry Editor (make sure that the other computer is also a 32-bit system)

  Go to HKLM/system/current control set/services/audiosrv click audiosrv and then on the file menu, select export and save the file to a USB key or drive.

  While copy on your machine and merge. Then restart your system.

  Otherwise reset Windows 8:

  http://www.kapilarya.com/how-to-reset-Windows-8

  Good luck once again :)

• HOL-SDC-1303 - VMware NSX - unable to connect to the Service research

  Hello

  I can not connect to the HOL-SDC-1303 - VMware NSX. It reports: unable to connect to the Service research.

  Anyone else having this problem?

  Gabrié

  Gabrié

  This could be a case of the vPOD not 'hot' or fully loaded, is there a chance you can try to run the lab, once the console is in place, may have to wait a few minutes (coffee break) and try again...

  I'll go ahead and run the lab to see if I feel the same way...

  Concerning

  Pablo

• How can I turn off the CSS rule window?

  How can I turn off the CSS rule window?

  Please don't say 'you should really learn how to use CSS '.  I create my own CSS for many years very well without the nuisance of a pop-up window.

  Ah, I see - I don't think there is a way to stop this behavior when you are working in Design view in DW CS4. If you were still using CS3, you could deselect the "use CSS instead of HTML tags" in the General preferences category, but who went in CS4.

  Best - Joe

• When I stopped my project, in the program monitor window appears red and yellow bars... why

  When I stopped my project, in the program monitor window appears red and yellow bars... why?

  It is a problem with the captain to loosen then off material MPE.

  The next time you post a question: FAQ What information should I give...

• Windows Firewall and Security Center will not start, error 1068 and 1079

  I can't start my firewall Windows, error: 1079... or Security Center, error: 1068. Can help you with this question? When I try to access the Dependencies tab I get this error: Win 32: the specefied for this service is different from the specefied to account for other services running in the same process.

  I checked to see if dependencies were the same account before I got the message of 'Win 32' and WMI Service runs in the same account (Local Service) as firewall and Security Center, but the RPC Service is running on the Network Service account and cannot be changed via the services console, because the account fields are gray and cannot be viewed or modified. I try to avoid using the tool 'SubInACL' because I don't want to reset the whole registry.

  Help, please!

  The other post:

  I had a problem with obtaining the Windows Firewall and Security Center to start. Service account permissions have been changed at some point, including the depedencies. I get the error 1079 on the Windows Firewall and 1068 on the Security Center. Both are defined on the Local Service, but dependence, the CPP is set to Network Service and cannot be changed because the user fields are gray. I try to avoid using the SubInACL.exe because I don't want to reset the whole registry. Can you help me please?

  No, I'm not on a domain. I connect via a open wireless "hotspot". My main problem is; I don't have a Firewall or Security Center. Nor will begin. I get the error: 1068, to Security Center and an error: 1079 on Windows Firewall. When I try to access the dependencies on either I get this window:

  WIN 32: The account specified for this service is different from the account specified for other services running in the same process.

  A month ago I made the mistake of trying to brand of ACDSee of security, "ACDOne" which includes software "BitDefender". That's when I lost my firewall and Security Center. BIG MISTAKE! I uninstalled and deleted all the files that I found that have been left.

  My Security Essentials and Windows Defender work very well. I'm stuck and need help with this please! Please, I beg you! Someone... Help!

  The system cannot find the specified file.

  http://support.Microsoft.com/kb/947821>

  After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the updates.

  UTC/GMT is 02:51 Wednesday, April 25, 2012

• Windows Vista frozen Security Center

  Open every time is windows Security Center, it becomes frozen on the screen and is impossible to change in any way (if the cursor is moved ove the window, it becomes the ' waiting' circle. Any attempt to close based on the results of substantive toolbar in this little window becoming frozen in place as well. Other windows can be opened while it is happening. Mcafee security enforcement. Is it possible to completely cut the security of windows? Fixed a bug? Is it still necessary with other security running program? I suspect that this slows down the whole system because everything is quite slow.

  Thank you.

  -Dave

  Open every time is windows Security Center, it becomes frozen on the screen and is impossible to change in any way (if the cursor is moved ove the window, it becomes the ' waiting' circle. Any attempt to close based on the results of substantive toolbar in this little window becoming frozen in place as well. Other windows can be opened while it is happening. Mcafee security enforcement. Is it possible to completely cut the security of windows? Fixed a bug? Is it still necessary with other security running program? I suspect that this slows down the whole system because everything is quite slow.

  Thank you.

  -Dave

  Well, if your system is slow is not because of the Security Center! It might be because of spyware or malware so, first make sure that your system is clean:

  Do using the analysis:

  http://www.Malwarebytes.org/ recommended

  http://www.SurfRight.nl/en/downloads/ recommended

  http://www.systweak.com/AntiSpyware/

  I recommend avira or avast as antivirus (personally, I think that mcafee and norton slows down your system)

  After that:

  go to msconfig (type in the search box in the start menu, and then press enter) then prepare your computer to clean boot by disabling all startup items and any of the services of windows, and then restart your computer. See if it makes a difference? If she did then you should know which ones caused to slow down your pc.

  at least reduce your startup programs hollow msconfig (type in there search box in Start menu, and then press enter)

  try to check your drive for errors and also run the SFC (sfc) system through cmd (run cmd as administrator, and then type sfc/scannow)

  use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

  preform disk cleanup and defragmentation in order to improve the performance of your system.

  do not use unistall programs u.

  Make sure your windows is uptodate and drivers work correctly and that they are as uptodate.

  Use http://www.javacoolsoftware.com/spywareblaster.html to protect your pc against spyware, adware etc and keep it uptodate then use firefox as your browser

  only use the block announcement more, no script and WOT for safer web browsing for firefox.

• Unable to re - turn on the firewall in Windows Vista

  How can I turn back, the Windows Firewall that came with my Vista Home Premium... gives the computer to my grandson.

  No matter what I do, I can't turn it back on... I turned it off because I bought something else safety and did not want 2 firewalls.  Pleeeeeeez help me.   Beth

  Hello

  If you always use with its own firewall internet security suite you should not activate the vista firewall

  2 firewall can cause conflicts within the operating system

  If you no longer have the other firewall installed, read this

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off