Unauthorized battery. Could pose a threat to the security

Similar Questions

• Is received call from Virtual PC Doctor scam, any threat to the security of my PC?

  I was called by Virtual PC Doctor around 14:00 today. They knew my name, address and telephone number and went through their usual field. When they asked me to go to my computer and tell them what was on the screen, I told them that I had to check out them before we all went further and ended the call. Is there any other action should I take to protect my safety?

  Hidden Hi Bandit,
   
  Microsoft will not unsolicited calls to help you with your computer. Make sure you hang up the phone the next time that you receive such calls.

  More information on:

  I received a phone call / email from someone who says that my computer has been infected by a virus

• Equium A200-1VO - what could be done to improve the situation of power supply?

  I recently bought an Equium A200 1VO as one second laptop - my other (an Aspire) is excellent, but a bit heavy in the basket to autour. Anyway, it seemed fabulous value and has worked very well so far - but I just discovered a catch today, the low battery life. I understand that this gap is shared with most of the other laptops of a comparable weight.

  In any case, I wonder what could possibly be done about (I often use my laptop while on the move, in locations without power outlet available, and less than 1 hour of power is very restrictive (I know powersave and others)-especially compared to my other laptop which is about 3 hours on battery)?

  Is there a portable power charger (the type with which you can load to the top of their rechargeable batteries on the sector, then take them and be able to charge mobile phones, iPods, etc. several times without needing an external power supply), as the Proporta one, who could charge a laptop as well (well, this laptop)? And how about the 9 cell Li-ion battery that sell Toshiba (or for that matter, one 6 cells)?

  How long will pretty much those give me? Are there other types of batteries that can be purchased for an extra life?

  Any suggestions on how I could get more autonomy would be most appreciated.

  Hi guys

  > what could be done to improve the situation of power supply
  You could buy a stronger battery which delivers more power for a long time
  You should take a look at the value of mA; more better ;)

  Also please don t forget that the Vista operating system needs more power as an early OS like XP.
  Vista needs more power because it wastes more computing resources.
  I read that a same notebook would run 2 times longer on battery with preinstalled W2K or XP.

• Satellite A500 - battery light flashes when connected to the power supply

  Win 7 Satellite A500 PSAM3A-03P00E.

  Battery light flashes when connected to the power supply (intermittent fault), when I disconnect the sector and reconnect the flashing stops and battery (high capacity) continues to receive.

  Also, when battery light blinks the keyboard backlight stays on when it should white and if the backlight is turned off and the battery light starts to blink the keyboard backlight turns on, all other functions seem to work well.

  Charges of battery and the wedges load properly (when the battery flashes).

  Hello

  Have you noticed this problem since the first day of purchase?
  Theoretically, it could be possible that your battery begins to malfunction
  On the other hand, an electrical problem could also be possible

  However, try this:
  Remove the battery and the AC adapter. Then press and hold button power 30 sec long.
  Then insert the battery and plug AC adapter still does that help?

  By the way: this is the BIOS updated? If this isn't the case, perform an update.

• HP ENVY m4-1015dx Notebook PC: hp envy m4 battery not charging but fresh when the laptop is turned off

  Hello!

  I was with my hp envy m4 core i7 for quite a while now... recently, I formatted and installed windows 8.1 64-bit installed. I decided to download some drivers from the hp site and I realized I needed to provide my model of laptop model number I could not remember so I decided to remove the battery while the computer is still connected to the power for the number, then I went back to the battery. the latter, I realized that the cell had not accused beyond of 7%, which was the level of support, until I removed the battery and when I checked the charge level, it indicated that it was plugged in but does not support. When I tried to repeat the entire process as well as close the laptop, remove the battery and turning it again nothing work and completely refusing to charge for its on.when I decided to turn off completely and then it was off it perfectly complete accused 100% operating battery estimated more than six hours of charge time, guys help me to understand what might have developed and what will be the best solution.

  Hi @Phanz,

  Thank you for your inquiry.

  I entered which you have tried to download the driver on the HP website for your laptop but realized you need the model number.  You have removed the battery while the laptop is running.  Now when you reinstall the battery, it shows that it is connected but does not charge and continues to 7%.   You have repeated the process and close Notepad and removed and reinstalled battery, but there was no change. If you turn off it charges the battery to 100%.

  You did all your Windows updates?

  Have you tried the troubleshooter in Windows?

  First of all, I would like to try a Windows restore to before remove you the battery.

  HP computers - using the Microsoft System Restore (Windows 8)

  If restore doesn't work or is not possible, you could try a Refresh Your PC to solve problems (Windows 8).

  Then you can try the following steps.

  HP laptops - test and calibrate the battery (Windows 8)

  The battery method compatible ACPI Microsoft control is basically the driver that communicates between the computer and the battery. There is a chance that it became corrupt and bad reads the battery level.

  Step 1. Go to the Device Manager
  Step 2. Select the stacks
  Step 3. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
  Step 4. Click on uninstall
  Step 5. At the command prompt, put a checkmark in the box to remove the current driver
  Step 6. Shut down the computer

  Step 7: Remove the battery for a minute and then put new
  
  When the computer returns to the top it should automatically find the driver.
  
  Step 8. Go to the Device Manager
  Step 9. Select the stacks
  Step 10. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
  Step 11. Click "automatically search for an updated driver.

  Do the same thing with embedded controller compatible ACPI Microsoft.

  Last option is to reinstall your Windows 8.1 Pro.

  Good luck!

• The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  Get this message when I start my computer, that is when the sign of Windows in the reception area appears:

  It says netsh.exe - Entry Point not found

  The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  Hey Jay_551,

  I have a good amount of information which I hope will be your answer useful lol.
  For starters, what Anti Virus do you use, the "netsh.exe" has been know to be infected by the virus and be put in a folder by some anti-virus. So I would check that out in your antivirus, I had this info at the following link:
  http://social.Microsoft.com/forums/en-us/msrconferencexpclient/thread/92f50d2c-e7a4-4c16-91ea-06bd59e15f8f
  Also here is the Microsoft article on how to remove the 'Zentcom System Guard", he is recorded as my Microsoft Malware, then read the following link:
  http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=Zentom+system+guard
  Also because it's a common thing for there to be lack of pop - ups after a system file is infected, and removed from the infection, I would review the last link below it. It was created about other missing files, but the situation applies to you:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/entry-point-not-found/66e6caf2-3087-4469-8816-59a19b3033c2

  Let us know the status or if you have any questions after these steps. I hope this has been useful and thanks for the display of Microsoft Answers!

• "Error 1402.Could not open key" during the installation of Adobe and HP update. Updates failed and earlier of the software cannot be put back in place because permission to modify the key is denied.

  • Issue: Failed to update and previous software may not be returned to or re-installed. Problem programs include Adobe Reader and scan and editor for my HP C4180 all-in-1 photo printer.
  • (For example) error messages:
    Error 1402.Could not open key:
    UNKNOWN\Components\1FA18F797...
    Check that you have sufficient access to that key, or contact your support...
  • No recent changes, with the exception of updates failed and normal widows.
  • I thought bad updates from HP and Adobe has caused the problem, so I uninstalled and tried to re - install the software several times, hoping a release update would solve the problem.  Impossible software returned to or re-installed, so I bought try 'PDF Converter 6' to to access PDF files. This program could not be installed for the same reason.

  The Windows 7 FAQ has reported that Windows 7 could be reinstalled everything keeping the settings. The same can be done with Vista? If not, is there a safe way to delete these keys, so the software can be installed/re-installed without having to make a facility 'clean '?

  Thank you.

  Hi misterDormie,

  This problem may occur if the permissions to a specific key in the Windows registry has been denied because the registry is corrupted or due to registry permissions

  I suggest you try the following steps:

  Step 1: Check with a different user profile

  If you do not have a different user account, you will need to create a (see link below).  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  If the problem persists,

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps mentioned in the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Loading of the connected battery, do not... (found the solution that worked for my Dell Inspiron

  Well, the charger is plugged, but he says not charging. What happened twice. I would have thought bad battery or bad, but fortunately the first charger, that it took place just after buying a new hard drive. I did a hard reset on the battery and that worked.

  Now, it happened again. I tried resetting the regular battery, but that didn't work. I tried to uninstall the device and reinstall... did not work either.

  Curiously, what worked was this:

  I have had about 38% battery remaining. I unplugged the laptop computer power cord and the wall.

  I removed the dough. Computer has been cut.

  I wiped the connectors of the battery with a clean cloth, several times.

  I put the dough back in and turned the laptop on battery only.

  I plugged the power cord into the side of the laptop, and then into the wall outlet.

  Immediately, the laptop began to charge again!

  I don't know why it worked. Maybe some grumpy off he can know. When I tried to reset the battery, I turned off the computer before you take out the battery. Then he went out. Laptop with power cord is plugged in and powered it. Then stop down and placed battery. I turned her back... but nothing...

  It may have to do to have the laptop when you remove the battery, or place the power cord in back, or could be simply wipe cloth?

  Hi thelights007,

  Please share the system model and the installed operating system. The error "plugged not charging" can be caused for a variety of reasons as defective adapter or a faulty load Board.

  Try the below mentioned steps that can help fix the problem. Procedure for running flea power is:

  • Turning the system off.
  • Disconnect all external devices (printers, external hard drives, flash drives) of the computer.
  • Disconnect the power adapter and remove the battery.
  • Press and hold the power button for 20 to 30 seconds to release the residual charge of the laptop.
  • Reconnect the battery and the AC adapter.
  • Once the system is turned on and booted properly, replace the battery. Check whether you still receive the error.
  • Start the system BIOS by pressing the F2 key on the Dell logo screen when you turn on the system.
  • Press the F9 key to load the BIOS default settings. When finished, press the F10 key to save and exit. System will reboot. Check to see if the error is still there.
  • Try to wiggle the cable of the AC adapter / CC and check if it makes a difference.
  If it still does not work, spare parts may be necessary.

  I hope this helps. Please share the findings.

• Low battery notification appears when battery reaches a critical level after the upgrade to windows 7

  I've upgraded to windows 7 recently and the battery notification does not work when the battery reaches its critical level.  It worked fine with vista.  Happen before when the battery reaches 25% icon in the notification area there was a visual reminder and when the level reaches 5% a pop up.  Now with windows 7, I get nothing to remind me.  I checked power options where I can change my plans of power and the battery notification read that he was turned on.

  I also had this problem of Windows 7 to go just in hibernation on low battery without notification.

  I checked the site of Microsoft for battery faq and how t change battery notification low that didn't tell me anything I didn't already know. So I decided to experiment some. I discovered that when I changed my battery critical to 'Shut Down' to 'Standby' Action, the low battery Notification arises and could move to a power source. Back to 'Hibernate', I changed the critical Action of the battery and the low-battery Notification appears always. I guess that the system needed just a little help :)

  My installation is barely a week, so I guess that the installation did not have the correct settings. After you apply some changes to settings caused the system to behave properly in this case.

  I hope this will help others with this problem.

  See you soon

• My network PC sign together on "Authorized" in Acrobat Reader 11 and I can digitally sign documents. Several others on my team have signing the value "Unauthorized" and are unable to sign digitally the same documents. My IT Department. have informed them

  My network PC sign together on "Authorized" in Acrobat Reader 11 and I can digitally sign documents. Several others on my team have signing the value "Unauthorized" and are unable to sign digitally the same documents. My IT Department. informed that they are unable to manually change the value on the other PC that seems strange or false to me, but could be due to several factors associated with the network? Advice, I can provide my team who will help you solve this problem?

  Reader 11.0.07 was the first version of the player that was able to digitally sign files that are not compatible with the use of the signature digital good reader.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• A few server contacts could not be copied to the address book of tis

  Try to sync Yahoo Contacts (entrance on MacBook Pro, OSX 10.11.6) with the Mac Contacts Contacts/iCloud. On iCloud Contacts, a triangle indicates next to 'Yahoo' with the msg "some contacts server may not be copied in this address book.

  Thread on the similar theme that might be able to help - a few contacts server could not be copied into the address book.

• How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  BlindingFog said

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.

• the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic link library nssutil3.dll

  Windows XP with Firefox 18.0.1 does not open when upgraded to the latest version.
  Error messages have been
  (1) the procedure entry that point pr_setcurrentthreadname could not be located in the dynamic library (2) ndpr4.dll the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic links (3) library nssutil3.dll was not able to load XPCOM

  A ran malware & anti-virus software then deleted Firefox via Control Panel, then residual file file C:\Documents & Folders\ApplicationData\Mozilla Director and program folder.
  Local & installed products ndpr4.dl and nssutil3.dll - fresh reinstall firefox several times - he got rid of the error message 1 but not 2 or 3 always cannot open Firefox.
  All solutions?

  I have this problem and I use Zone Alarm Extreme Security with Force active field. I found that by turning off the virtual Cache in Zone Alarm that this problem has disappeared and has been able to restart firefox.

  Here is a post I found that addresses the issue in some way. http://KB.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled

• get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  Hello

  You can try to install the latest version on the current: https://www.mozilla.org/en-US/firefox/new/