Unauthorized hidden Admin

Similar Questions

• I now have a hidden admin account on my second windows. Can I use it to connect to my old windows

  original title: passwor

  I have two windows installed on my laptop. Both are windows vista. I could not log on to the windows of the first, because it does not accept my password, even if my password is correct. Then I installed windows again, but did not remove the old windows.

  My question is: I now have a hidden admin account on my second windows.

  Can I use it to connect to my old windows. The old windows is stored in a separate file. I'm the only Admin and the only user.

  Hello

  You will not be able to use the old profile, but the hidden administrator account is activated, you may be able to access files and folders in this account that you have not deleted the profile.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• hidden admin account is unlocked, how to show only in Mode safe

  Recently, I've unlocked the Admin account hidden in my copy of Windows Vista Ultimate 64-bit.  Currently, the account presents itself as one account of another in the normal logon window, and icons for other users.

  I would like to know if there is a way to hide the account in the logon window and only allow him to show when it is safe mode is enacted (as in Windows XP).

  Hello

  This allows try again. It is not good to use the hidden administrator account, as this is the last possible road
  a difficulty if things go really wrong. So make another ADMIN account with your password even. You
  then have two accounts administrator and any number of user accounts set up (not to mention
  the moment hidden the ADMIN account).

  How to create a new user account in Vista (except to raise it to the status of ADMIN)
  http://www.Vistax64.com/tutorials/93009-user-account-create.html

  You can have the login screen requires a name and a password so well that you can open a session with a
  Account ADMIN, he is not named. Also we can connect with any valid user account.

  How to make Vista require a user name and password when connecting
  http://www.Vistax64.com/tutorials/89812-logon-username-password.html

  How to hide or show an account in Vista and Windows 7
  http://www.Vistax64.com/tutorials/94805-user-account-hide.html

  Then, as explained in the link mode without failure in the previous answer, that you can connect with any account
  you have available and enable the hidden account if necessary (which you shouldn't have to)
  two ADMIN accounts that you can use) while is safe.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• VISTA administrator accounts disabled. Could not activate the hidden admin

  HI - all my VISTA administrator accounts are disabled. I could not allow the hidden administrator because it requires an active administrator. Can you help me create an admin user?

  Thank you
  Ganesh

  HI - all my VISTA administrator accounts are disabled. I could not allow the hidden administrator because it requires an active administrator. Can you help me create an admin user?

  Thank you

  Ganesh

  Sorry, if you are not set up as an administrator user account, you cannot enable the built-in administrator.

  This forum prohitbits someone help users to bypass the password protection, regardless of the reasons.

  This is the policy of the forum:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• Cannot access hidden admin account?

  I use windows vista on a dell latitude D410. recently, I created an admin account hidden via regedit and deleted the original account administrator privileges. now, when I try Ctrl + alt + del on the logon screen, it does nothing. When I try to make everything about the privileges of the admin on the standard account, it asks the admin password, but does not allow for me to enter the password. Instead, it says to insert a smart card. I do not think that my computer can use smart cards... this version of windows vista was installed after I got the computer because it was running ubuntu previously. I can't run the command prompt as an administrator because of the above and the admin account does not display in SafeMode suggestions?

  EDIT: I think I can have somehow makes windows forget completely on the admin account, because the folder does not exist among consumers, hidden or not... even when you try to type complete the extension in the address bar, it indicates the path does not exist...

  Format the hard drive and reinstall Windows and your applications then leave the administrator account - and in particular the register - only.

• I just find the hidden admin profile, now I wish I had access to all the files in my other profile. How do I do that?

  I just had this puter abut a year ago and she never I would like to be admin. I just find how to access it and shoot profile up.it was hidden, I found a post on how to pull up through back comand. so now I have 2 log in options. mine or admin.

  now how to open the admin access to my profile?

  I wish I had the easyest and fastest way to unlock my profile so that my admin profile can be accessed freely.

  DO NOT DELETE THE HIDDEN ADMINISTRATOR PROFILE!  Just disable it is is no longer available for use (using the same procedures in reverse you used to activate it).   Then if your active Admiinistrator profile becomes corrupt, you can always turn it on again to restore the Administrator profile - otherwise, you're in trouble without an administrator account on the system (you might be forced to do a clean boot to get a new account of qualification and you don't want that to happen).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot type the password in the user account control prompt after activation of the hidden admin account.

  Original title: where to type the password of the user account control?

  I have a problem of user account control is it said to type an administrator password, but there is nowhere to type in it. I can't access anything on my computer because there is a password. My computer does not have an administrator account and I can not activate the administrator hidden with UAC on because I can't type the password. Where to enter it?

  Hello

  System Restore can probably help.

  To restore the system from DVD

             

  a. start the computer from the Windows installation disc

  b. Windows will automatically run the disk is empty, and will load the files; This can take some time. The

  c. Windows Vista install will begin charging.

  d. now, select your installation language, time and currency Format, and keyboard type and then click "NEXT" to continue.

  e. in the next screen click 'Repair your computer' to continue. Windows will now search an Installations of Windows.

  f. on the next screen, select the operating system on which you want to do a repair. Select it, and then press 'NEXT' to continue

  g. you are now in the menu "Recovery Options.

  h. in the 'Recovery Options' menu select 'SYSTEM RESTORE'.

  i. the menu "Restore files and settings" is displayed, click 'NEXT' to continue. Now in a 'Restore Points' selection select one that you want to restore too. Then click "NEXT" to continue. You are now given an option to restore the other disks as well as the operating system drive. If you have no problem with them, then just restore the main drive.

  j. now, you will need to confirm the restore point. Click "FINISH" to continue or "BACK" to select another drive or restore point. You are now prompted one last time to confirm that you want to continue. Click 'YES' to continue or 'NO' to select a different drive or restore point.

  k. 'System Restore' will boot now.

  System Restore will now restore files, finalize the restoration.

  Once this done, tell whether she succeeded it, if so click "RESTART" to restart the computer, if it's not then try a different date.

  Once rebooted and you get on the desktop, you will receive a confirmation of the success of restorations. Click 'CLOSE' to continue.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hidden admin rights

  Hello Microsoft

  Who should I contact for any problem of security I can give a user administrator rights (because they disabled the account of administrator for example)?

  Not only can I give them administrative rights, but I also do hidden that they do not appear on the settings so cannot be deleted. So they resemble a normal user in all settings but in fact have administrator rights. You don't need a cd/dvd of recovery for this either.

  I tried to call your call center and also sent emails and asked on Facebook.

  Not a single person has reported to me in the right direction.

  This maybe not important for a user at home but in a corporate environment where users should be locked there some implications (can add remove software and also to edit the registry).

  Kind regards

  Dan

  Who should I contact for any problem of security I can give a user administrator rights (because they disabled the account of administrator for example)?

  -> Disable the administrator account has no effect on the security settings. They remain as they are.

  Not only can I give them administrative rights, but I also do hidden that they do not appear on the settings so cannot be deleted.

  --> There are a few ways to manipulate the permissions of resources, even when the resource is hidden.

  So they resemble a normal user in all settings but in fact have administrator rights.

  -> If you do not want that these accounts have administrator rights then you must demote the ordinary user accounts.

  I tried to call your call center and also sent emails and asked on Facebook.

  Not a single person has reported to me in the right direction.

  -> If you need assistance from Microsoft then you must take a paid service call.

• Unauthorized access admin on VPN 3030.

  Hello

  ACS 4.1

  2 x 3030 concentrators ver 4.7

  I have problems with administrative access to our backup c3030 VPN via GANYMEDE.

  Scenario: We have a live and a c3030 backup. They will be configured VRRP failover in case of failure on the direct c3030. The direct c3030 is enabled on GANYMEDE and all access is fine.

  According to the doc cisco here:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2284/products_configuration_example09186a0080093fe0.shtml

  .. .privilege level is set to 15 on the admin on the c3030 user as well as on the GANYMEDE group, as I have said - everything works fine on the direct c3030.

  I now backup c3030 added the same device group of GANYMEDE network and configured the c3030 with exactly the same setup ACS as the direct c3030. We can log to the backup c3030 via GANYMEDE, we cannot access the admin section and get the error "you don't have sufficient permission to access the specified page.".

  This was curious me for quite awhile, it there's nothing I can find on the web and short to wipe the backup c3030 and back that I'm not sure that there is something we can do?

  I hope that someone out there encountered this problem?

  See you soon.

  I wanted to make sure was, when we try to connect to VPNC (backup), the newspaper of Pass that we obtain NAS IP address as private IP of the interface on the ACS reports. It is, then that's fine.

  This may sound weird, if you have multiple local users on VPNC with 'same' privilege level, change them at the level of different privileges and keep admin 15. And then try again. I think you should have access to consoles, do?

  Kind regards

  Prem

  Please rate if this can help!

• Unauthorized hidden accounts Remote Desktop connection

  Hello

  I tried to investigate this but couldn't find anything yet.

  I have a system running Windows 7 Professional, and I can access the system via desktop remotely with say user2 that is configured as an administrator account.

  [If I try and hide the user account of the screen with an entry on behalf of the start-up SpecialAccounts] section \UserList the user is no longer able to communicate with the Office remotely.

  Once the account is visible while the account is able to connect again.

  The initial screen says: "Windows security - cannot perform this operation on this built-in special user" and then the connection is de-energized.

  Any help would be appreciated

  Thank you

  Hello

  Please contact Microsoft Community.

  I suggest you to send your request in the TechNet Forums for the best solution. See the link below.

  https://social.technet.Microsoft.com/forums/en-us/home

  Response from us, then we can help you further.

• Question of privilege and bluetooth satellite L650 Admin

  Hello

  (1) I have single user in my windows 7 (show administrator), but when try to open Task Manager or regedit it displays as u is not a permit to the admin to do it, when I invited acc, it allow him given the Task Manager and other options.
  I tried with > net user administrator enable option in the Task Manager as admin (default windows admin) is not available...
  How to solve this problem?

  (2) in my Bluetooth I receive the files of others using this, but I am not able to send the file to anyone.
  Why this is happening and how to check it?

  2 weeks before that I installed avira free edition it will affect anything?

  Thanks in advance...

  > 1) I have single user in my windows 7 (show administrator), but when try to open Task Manager or regedit it displays as u is not a permit to the admin to do it, when I activate comments VAC, it give the Task Manager and other options, I tried with > net user administrator activate the option in the Task Manager as admin (default windows admin) is not available... How to solve this problem?

  First I put t think its a laptop problem. It s question OS.
  I don't know why a marked admin user can not get administrator privileges, but have you tested this creating a new user on this laptop of m? If this is not the case, try this.

  In addition, I would recommend activation of the hidden Admin account.
  Go to CMD (command prompt) and try this:

  + net user administrator / active: yes +.

  Then a message should appear that this command was run sucefully.
  Sign up now and you will see the Admin account
  Now you can connect using this account and can create a new user with administrator privileges

• Can one please tell me that how can I crack a password administrator of Hidden windows without connect or use cd or software

  In case I forgot my admin password I can break it by logging in via the hidden administrator account. If as if I put the password for both my account admin and admin account hidden and then I forget them both, how can I break hidden admin account or visible admin account password without using any software or bootable CD and all the other utilities. Can someone please answer my Question.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires
   http://support.Microsoft.com/kb/321305

  Microsoft has a very strict policy regarding passwords, you may want to consider the following:

  Keep secure passwords - Microsoft strategy on move the passwords
   http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  Microsoft's strategy concerning lost or forgotten passwords
   http://support.Microsoft.com/kb/189126

  I hope this helps.

• Remove the admin account, just standard account available

  Some time before, I created an administrator account and a standard account and gave both a password, then, I deleted the admin account, completely forgetting to turn the other standard account to an admin.

  Now, whenever I try to do something that is beyond the power of a standard account to, Window Vista with ask me to type a password to admin, but there is no place to type the password. The box to type in is not there!

  When I tried to turn my standard account in an admin, to create a new account, or nothing to do with an account, Vista will ask me a password that I can't provide and have no where to give to command prompt to activate the hidden admin does not work too.

  If anyone can please help me turn my standard account now to an admin! Urgent!

  Yay! It is resolved! Thank you very much! So that before I posted this, I tried to find the safe mode option, myself and the possibility to press F8 just wasn't there! Then I got stuck there... Thank you very much!

• How can I reset passwords using the hidden administrator account?

  Original title: hidden admin account

  How can you reset pass using the hidden account dmin. ? That can make the admin account hidden?

  I have windows vista and I am the only administrator and user of my laptop.

  Hello

  You cannot use the hidden administrator account to reset the password. If you forget your only means of password to reset using the password reset disk. See the article below for further assistance.
  What to do if you forget your Windows password
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  Activate hidden administrator account gives you access to the files or the privileges if you are denied access in some cases.

  Hope this information helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I don't have admin permissions, in MY ADMIN ACCOUNT

  Hi, my name is luiz and I run an edition 64-bit windows vista Home premium.

  Suddenly he starts to tell me, when I was installing itunes for example, the installatioin couldn't be completed, because I had not enough privileges, when I remove a program folder it says the same thing, in cmd, I typed "netstat-b" and he said that this operation requires an elevation. I want to have control over my computer I want to say that in the name of gods is more privileged than the freakin admin account. what I need to know, is how can I give my authorisation max has to do something, so I better control on my account. also, yes I tried "run as Administrator" and no, I don't want to activate the hidden admin according to I governed my computer once and now I can't do barely anything, so please help me. :-)

  Luiz Berti - Windows Vista Home Premium 64 - bit Edition

  refine ways to improve performance. Several tools suggest that they make your window faster and better. But I never recommend using such tools.

  If you get the quick UAC all right. You must run cmd with admin (run as admin) rights and accept the UAC prompt for administrator rights if you want to start netstat - b.

  With UAC turned you have standard user rights most of the time. To get administrator rights, you must select 'run as administrator' every time.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/