unexpected end of the subtree of the log file errors

Similar Questions

• SchemaViolationException: [LDAP: error code 65]-reconciliation in the log file error

  Hello

  When I try to recon one user using reconciliation trust, I'm gettting error log below

  javax.naming.Directory.

  SchemaViolationException: [LDAP: error code 65 - entry cn = brownxxl, cn is users, dc = xxx, dc is xxx, dc = net violates the schema directory server configuration because it includes obpasswordexpirydate attribute that is not authorized by one of the identifiers defined in this entry]; name remaining "cn = brownxxl, cn = users, dc = xx, dc = xxx, dc is net"

  What is the cause of this error? There are configuration changes that I have to do before you run the recon?

  Thank you

  You have LDAP active sync and IOM - OAM integration?

  Make sure you follow all the steps described below doc - id:

  Consult the PDF to Doc ID: IOM - OAM Integration steps For11gR2PS1 Version (Doc ID 1939005.1)

  ~ J

• Check alert event ends in error, the log file has no error message

  Hello
  
  We are 11.5.10 in 12.1.3 reclassification. Check alert event ends in error, the log file does not have any information. This alert is on. oe_order_headers_all alert works well in 11i.
  
  12.1.3
  Database 10g
  
  Enjoy all the entries.
  
  I noticed that the operating unit parameter is passed as NULL, don't know if this is causing the problem.
  
  K

  926765 wrote:
  Hello

  We are 11.5.10 in 12.1.3 reclassification. Check alert event ends in error, the log file does not have any information. This alert is on. oe_order_headers_all alert works well in 11i.

  12.1.3
  Database 10g

  Enjoy all the entries.

  I noticed that the operating unit parameter is passed as NULL, don't know if this is causing the problem.

  K

  Please see if (OE_ORDER_HEADERS_ALL (check event Alert) ends in error for all orders introduced [1322052.1 ID]) help.

  Thank you
  Hussein

• Unexpected end of the process.   original content not found

  I used Flash Builder 4.6 for a while and today, after the execution of the request of several times more than 4 hours I get this when I try to launch it I get "Failed to launch" with the following message:

  Unexpected end of the process.

  original content not found

  Details of the launch command: "C:\Program Files (x 86) \Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\bin\adl.exe"-runtime ' C:\Program Files (x 86) \Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\runtimes\air\win "- profile mobileDevice screensize - x 480 x 800 775:480 - XscreenDPI 217 - XversionPlatform AND"Flash Builder C:\Users\Kim64\Adobe 4.6\CleanManager\bin-debug\CleanManager-app.xml""4.6\CleanManager\bin-debug C:\Users\Kim64\Adobe Flash Builder.

  I am unable to run this application, but I can run other applications in Flash Builder 4.6

  Thanks for any help.

  Kim

  I found the problem later, it was a line that had some bad code that did not show the red circle.

  My code is in an event of database has no where to add the ToString;

• OMB + sending output to the log file (no script)?

  Hello

  When you run the script OMB + below, the syntax rather than the output is sent to the log file.

  I'm a bit of an OMB + newb - is it possible to remove the code and just see the results in the newspaper?  It seems like it should be obvious, but I can't get out.

  Any help gratefully received!

  Thank you

  Charlie

  Set OMBLOG C:/DOCUME~1/User1/Desktop/OWB11/OMBSCR~1/get_deployable.log

  OMBCC "DWH_DEVELOPMENT".

  the value of mods [OMBLIST ORACLE_MODULES]

  foreach $mods {} mod

  OMBCC ' / DWH_DEVELOPMENT / $mod.

  define tabs [OMBLIST TABLES]

  foreach $tabs {} tab

  puts "$mod $tab [OMBRETRIEVE TABLE '$tab' (DEPLOYABLE) GET PROPERTIES]"

  }

  }

  OMBCC ' / '.

  OMBCC "DWH_DEVELOPMENT".

  the value of mods [OMBLIST ORACLE_MODULES]

  foreach $mods {} mod

  OMBCC ' / DWH_DEVELOPMENT / $mod.

  define tabs [OMBLIST VIEWS]

  foreach $tabs {} tab

  puts "$mod $tab [PROPERTIES of OMBRETRIEVE VIEW '$tab' (DEPLOYABLE) GET]."

  }

  }

  OMBDISCONNECT

  Hello

  I don't know if I understand what you want to achieve. If by just seeing the results in the paper mean you saw that puts the output of the order, you can use another file to write the output (I wouldn't leave out the OMBLOG file, it can be handy when you are trying to debug an error). You can use this piece of code:

  Set p_logfile "C:\\my directory\\my file.log.

  Set v_usefile [open "$p_logfile" +]

  puts $v_usefile 'your message '.

  close $v_usefile

  I like to use double quotas in case the file has spaces in its path or name, if there is no space, quotas are not necessary. You can bring order to open at the beginning of your script and the file close to the end, although if your script fails, you will need a new log file, because the one you were using will get blocked until you restart your computer. For complex scripts, I have a procedure that I give the word to write my messages in a file that I keep in a global variable, this procedure opens the file, write the message, and then closes the file. Once get you it working, you don't get the locked log file because the script that you run fails.

  Concerning

  Ana GH

• Confusion of creation for the log file

  SQL*Plus: Release 10.2.0.3.0 - Production on Mon Mar 11 11:42:45 2013
  Copyright (c) 1982, 2006, Oracle.  All Rights Reserved.

  There is some initialization parameters that decide the location of the log online redo generally files. These initialization parameters are
  
  -DB_CREATE_ONLINE_LOG_DEST_n
  -DB_RECOVERY_FILE_DEST
  -DB_CREATE_FILE_DEST
  
  I did not understand the level of priority of these settings if you assign each of them to create the online journal file, if I put all these setting then by creating online log file always va-the path that define in the DB_CREATE_ONLINE_LOG_DEST_n parameter and ignores the other parameters (DB_RECOVERY_FILE_DEST DB_CREATE_FILE_DEST).
  
  If I just set the last two (DB_RECOVERY_FILE_DEST, DB_CREATE_FILE_DEST) and do not set the DB_CREATE_ONLINE_LOG_DEST_n created in the two location DB_RECOVERY_FILE_DEST, DB_CREATE_FILE_DEST log file) with mirrored mechanisim.
  

  SQL> select name,value
    2    from v$parameter
    3   where upper(name) in ('DB_CREATE_ONLINE_LOG_DEST_1','DB_RECOVERY_FILE_DEST','DB_CREATE_FILE_DEST')
    4  /
  
  NAME                                                                             VALUE
  -------------------------------------------------------------------------------- -------------------
  db_create_file_dest                                                              D:\ORACLE\PRODUCT\10.2.0\DB_1\dbfile
  db_create_online_log_dest_1
  db_recovery_file_dest                                                            D:\oracle\product\10.2.0\db_1\flash_recovery_area
  
  
  SQL> select * from v$logfile
    2  /
  
      GROUP# STATUS  TYPE    MEMBER                                                                               
  ---------- ------- ------- -------------------------------------------------------------------------
           3         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG                                     
           2         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG                                     
           1 STALE   ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG                                     
  
  
  SQL> alter database add logfile
    2  /
  
  Database altered.
  
  SQL> select * from v$logfile
    2  /
  
      GROUP# STATUS  TYPE    MEMBER                                                                                       
  ---------- ------- ------- -------------------------------------------------------------------------
           3         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG                                             
           2         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG                                             
           1 STALE   ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG                                             
           4         ONLINE  D:\ORACLE\PRODUCT\10.2.0\DB_1\DBFILE\ORCL\ONLINELOG\O1_MF_4_8MTHLWTJ_.LOG                    
           4         ONLINE  D:\ORACLE\PRODUCT\10.2.0\DB_1\FLASH_RECOVERY_AREA\ORCL\ONLINELOG\O1_MF_4_8MTHLZB8_.LOG

  As you can see above the result, create a log file share setting the parameters DB_RECOVERY_FILE_DEST, DB_CREATE_FILE_DEST), when I set the DB_CREATE_ONLINE_LOG_DEST_1 parameter, the log file creation is going to set in the DB_CREATE_ONLINE_LOG_DEST_1 parameter only, no matter what you set for DB_RECOVERY_FILE_DEST DB_CREATE_FILE_DEST). You can go there.

  SQL> alter database drop logfile group 4
    2  /
  
  Database altered.
  
  SQL> select * from v$logfile
    2  /
  
      GROUP# STATUS  TYPE    MEMBER                                                                       
  ---------- ------- ------- -------------------------------------------------------------------------
           3         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG                             
           2         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG                             
           1 STALE   ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG                             
  
  
  SQL> alter system set db_create_online_log_dest_1='D:\oracle' scope=both
    2  /
  
  System altered.
  
  SQL> select name,value
    2    from v$parameter
    3   where upper(name) in ('DB_CREATE_ONLINE_LOG_DEST_1','DB_RECOVERY_FILE_DEST','DB_CREATE_FILE_DEST')
    4  /
  
  NAME                                                                             VALUE
  -------------------------------------------------------------------------------- -------------------
  db_create_file_dest                                                              D:\ORACLE\PRODUCT\10.2.0\DB_1\dbfile
  db_create_online_log_dest_1                                                      D:\oracle
  db_recovery_file_dest                                                            D:\oracle\product\10.2.0\db_1\flash_recovery_area
  
  SQL> alter database add logfile
    2  /
  
  Database altered.
  
  SQL> select * from v$logfile
    2  /
  
      GROUP# STATUS  TYPE    MEMBER                                                                               
  ---------- ------- ------- -------------------------------------------------------------------------
           3         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG                                     
           2         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG                                     
           1 STALE   ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG                                     
           4         ONLINE  D:\ORACLE\ORCL\ONLINELOG\O1_MF_4_8MTJ10B8_.LOG                                       

  My confusion here is why the mechanisim of (DB_RECOVERY_FILE_DEST, DB_CREATE_FILE_DEST) is him even while the same with both of them becomes differ when you set
  'DB_CREATE_ONLINE_LOG_DEST_n '?

  DB_CREATE_FILE_DEST is used if DB_CREATE_ONLINE_LOG_DEST_n is not defined.

  Db_recovery_file_dest is used to multiplex logs files.
  For example, if Oracle uses DB_CREATE_FILE_DEST (because DB_CREATE_ONLINE_LOG_DEST_n is not defined), it multiplexes the logfile to DB_RECOVERY_FILE_DEST if DB_RECOVERY_FILE_DEST is also defined.
  If, however, DB_CREATE_ONLINE_LOG_DEST_1 is used, Oracle wait allows you to set the DB_CREATE_ONLINE_LOG_DEST_2 as well for the multiplexing of the file journal; Otherwise, it assumes that you do not want the multiplexed log file. The fact that the parameter ends with an n means that Oracle uses the n = 2 f or the multiplex if defined location.

  Hemant K Collette

• Change the column header in the log file

  Hi people,

  I have a small program running to collect and record the data in a file.

  The log files to a CSV file correctly, but the column headers show as "Untitled".

  How to set these to something meaningful?

  Had a hunting around, but can't find the settings.

  Any help gratefully received!

  See you soon

  Duncan

  Finally managed to find a Community position covering cela.

  Check out this post fior details:

  https://decibel.NI.com/content/docs/doc-10694

• HELP - read file that VI does not stop at the end of the WAV file

  Hello

  I am a beginner and I'm working on a project that opens a .wav file and it plays (with volume control). I found all the associated examples sounds extremely useful and I can just edit the audio file to output.vi his example to my project.

  I'm running into a problem where the vi does not stop at the end of the wav file, and it seems for a while loop. the wav file I am using ended a long min (and it has been converted to a data file in a wav file, if it matters). I have attached my vi modified here and appreciate any help.

  Thank you!

  Christy

  The OP and the æ OR

  Please go to help on the toolbar. Then select examples and search for sound. Locate the sound file "for his Output.vi.

• imageFORMULA CR-180 check the log file to scan

  Hello

  I work with an imageFORMULA CR-180 check Scanner and when executing a good amount (longer than 100) of the controls, I noticed that the scan control stops and a pop-up window appears on the Analysis ToolPak asked if I would like to replace my log file and start over.

  The software that I use is called "Utility scan for CR-180II" and the log file contains the information of MICR line controls scanned, as well as the date of the analysis, and the location of the file to the images captured from the parser.

  Log file options under "Options-> MICR data parameters.

  What I do, it is by clicking on ' no, I want to overwirte the file ", stop the scan, moving the log of the 'old' file, restart the scanning and backup to a new log file.

  Is there anyway to work around this problem and record continuously in the same log file?

  Is there a memory limit on the scanner?

  This is the Web page of the scanner that I use:

  http://www.USA.Canon.com/Cusa/support/Office/imageformula_scanners/imageformula_cr_180_cr_180ii/imag...

  Hi lendjones!

  Thanks for posting in the Forum! Canon does not provide direct support for imageFORMULA product series, but your dealer will be able to help you! If you do not have a reseller, please call us at 1-800-OKCANON (652-2666) and we will be happy to provide you with dealers who are in your area.

• KB2686509 fails to install, said lack of prerequisite useful and check the log file.

  I am running Windows XP on a Toshiba Satellite computer laptop, Intel PIII, 847 Mhz processor.  I installed SP3.

  Here are the contents of the log file:

  3,695: 17:49:52.498 27/01/2013 (local)
  3,695: c:\fb66e1fe6323f2b745bfc5d1\update\update.exe (version 6.3.13.0)
  3.755: DoInstallation: GetProcAddress (InitializeCustomizationDLL) returned: 0x7f
  3,775: hotfix started with following command line:
  3,775: in function GetReleaseSet, line 1211, RegOpenKeyEx failed with error 0x2
  3,775: in function GetReleaseSet, line 1240, RegOpenKeyEx failed with error 0x2
  3,805: CreateUserInterface: GetProcAddress for DefineInstallCustomUI failed: 0x7f
  3.946: return the value of IsMachineSafe = 0
  3.946: IsMachineSafe return 441092
  3.946: condition in Prereq.IsMachineSafe.Section failed with the fist
  3.946: Check condition for 1 line of prerequisite returned FALSE
  3.956: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  3.966: KB2686509 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
  3.996: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  3.996: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
  13.830: message displayed to the user: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
  13.830: user input: OK
  13.830: Update.exe extended error code = 0xf0f4
  13.830: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

  Here is the content of the faultykeyboard log file:

  kbdsp.kbd
  kbdsp.kbd
  kbdno.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  Kbdus.kbd
  kbdla.kbd
  Kbdus.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdycl.kbd

  Thanks for your help!

  I've seen this before. Check this.

  http://social.technet.Microsoft.com/wiki/contents/articles/10876.kb2686509-failure-due-to-upgrade-from-Windows-Me-or-98-to-Windows-XP.aspx

• Is this OK to remove most or all the *.log files?

  Windows XP Media Center Edition SP3 on Gateway Intel system double heart Hz 6300, 1.86, 3.24 GB/ram, 320 GB hard drive.

  He is allowed to delete most or all the *.log files, or would be a serious mistake?

  I never used for anything else than to troubleshooting, then very rarely.  So I would delete them to your heart's content.  However, I must point out that they do not have enough disk space amount to something meaningful, so there is really no need to worry about them.

  I hope this helps.  Good luck.

• Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  I use the version of Vista Home Premium.

  While I don't really like how the UAC area enters the information that tells it when to display the box tell me about your work of things on the UAC (I know an article exist on the web), is not how to answer this question.

  There is no log of UAC elevation file.

• I get the following error messages at startup: Windows Sidebar Settings.ini. is used by another system. Recorder warning: recorder! Initialize is not yet call... The log file can corruption exp. application failure did not start.

  Original title: opening of the pop ups

  I have Vista Home version.  When I connect, I get the pop - ups following:

  1.) _Windows sidebar Settings.ini. is used by another system.

  Recorder 2.) WARNING: Logger! Initialize is not yet call... The log file can corruption exp.

  3.) down the application did not start.

  Also: while I'm on the internet a pop - up occurs from time to time indicating: "Internet Explorer has stopped working".  Sometimes I get started, and sometimes I can just 'X' out and I'm always on.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  I suggest you try the procedure below.

  Step 1: Try to perform the clean boot in order to solve startup error messages.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Step 2: I suggest you try the steps outlined in the article below to solve the problem of internet Explorer.
  http://support.Microsoft.com/kb/936213

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• 1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  Try this FixIt:

  Code error '0 x 80070646', '646', or '1606 ' when you try to install Office updates

  http://support.Microsoft.com/kb/2258121

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• An error has occurred. Check the log file. C:\User\---\PamperedPartnerPlus\workspace\.metadata\.log

  What should I do: an error has occurred. Check the log file. C:\User\---\PamperedPartnerPlus\workspace\.metadata\.log.

  See this post and follow the instructions to update your program to possibly solve the problem.

  Technical support
  http://www.chefsuccess.com/F46/tech-support-41431/