UNI/NNI

Similar Questions

• Best Macbook for Uni/accounting?

  Hi, I'm hoping to go to University the year next to study accounting and finance. Yesterday I bought the new gray Space 12 '' Macbook Online (without testing in-store), however I am now questioning if it was the right decision, as almost all the critics have said that the 13 "Macbook Pro than the Macbook at all levels (in addition to being more heavy/less portable). I'm 17 and I am not very well informed about the technological differences - but for now I don't seem to get on with the Macbook, it has a very small keyboard and it is almost too light so he could be comfortable on my lap, etc., but it must just be endured. If I work in the offices of accounting on investments as well as to take around Uni, what Macbook would be better for me?

  I'd appreciate really no help from any good Apple fans informed. Thank you!

  Probably not a Macbook at all, there is a shortage of good accounting software for Macs. A portable powerful Windows would be better and (b) cheaper.

• When you watch the steaming video, I get the sound but only a green screen Uni.

  * Original title: video

  When you watch the steaming video, I get the sound but only a green screen Uni.

  Moved from the center of Community Participation.

  Hello

  As you don't give any information about your computer operating system or software, all I could suggest is to install a codec Pack.

  http://www.SnapFiles.com/get/k-Lite-full.html

  Follow this information here too:

  "FYI: . During our review, we found that this program offers to install promotional, third party components. Installation of these components is optional, but you should pay attention when installing'

  See you soon.

• When I download a WMV file on a website and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.

  When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.  I was told that the media player can miss a card.

  Hello

  1. what operating system is installed on the computer?
  2. are you able to play videos other than video .wmv successfully?
  3. don't you make changes to the computer before the show?

  Method 1
  I suggest you to check if the hardware acceleration of the display device setting is too high.
  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. click the Troubleshooting tab, and then move the hardware acceleration to none.

  d. click on apply and then click OK twice.

  e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.

  Method 2
  The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

  If the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• When you try to click on full screen screen goes white Uni

  When I click to watch FULL screen, it goes white Uni?

  It was easy to do and big video site Iwent and WAA-Laaa! Problem fixxed. THANK YOU TO WHO EVER IT'S HELPED ME TO > & GOD BLESS YOU & FAMILY. I wish nothing less great. SINCERELY OF JERRY BARLOW

• Windows 7 does not recognize my external hard drive Western Digital model WD2500B007-NNI. __

  Does anyone know how to get the Western Digital external hard drive to work with Windows 7?  The external drive model number is WD2500B007-NNI

  Hello

  Do you see any yellow\red exclamation in Device Manager?

  I suggest to open disk management and check that if the drive is detected there, here are the steps:

  1. open computer management by clicking the Start button, click on the Control Panel, clicking system and security, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in the left pane, click Disk Management.
   
  If the hard drive is recognized in disk management and if there is no letter assigned drive, I suggest you make a right click on the drive and assign a drive letter and check to see if it helps:

  1. click on the drive to change and then click on change drive letter and paths.
  2. do one of the following:
  ·         To assign a drive letter if it has not already received, click Add, click the letter you want to use, and then click OK.
  ·         To change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK.
  ·         To remove a drive letter, click on remove and then click Yes to confirm that you want to remove.

  Check this link for more information:
  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• UNI-DIRECTIONAL on 1001 ASR feature

  Hello

  I have a router ASR 1001 last 3.9.2S current execution code.

  The Uni-directional feature was introduced in 3.9 S

  However...

  With the license of IPBase the Uni-directional command does not appear in configuration mode.

  But when I activate the trial license AdvancedIPServices and restart, the UNI-DIRECTIONAL command appears now in Setup mode.

  I don't see that it documented anywhere in the reference command/notes version IOS XE etc. you need to have the Advanced IP Services feature set allowed to use UNI-DIRECTIONAL on the ASR feature 1001. Anyone know if this is correct or is it an error or a bug?

  See you soon

  Hello

  Which can be seen in the browser functionality. If you select s 3.9 and Ip Base you want to see the unidirectional link detection section (you can filter by function name using like match stringUniDir). If you select Advanced featureset Services - you will find in the list.

  Niko

• UNI-DIRECTIONAL normal/aggressive with several neighbors

  Hello

  We lack 4 c4500 switches to 2 sites linked together through the layer 2 cryptographic boxes and VPLS in a point-to-multipoint configuration which is completely transparent (it's more or less like connecting them via a Hub - each switch sees the other 3 as neighbours).

  Our basic configs have Uni-directional globally active in aggressive mode.

  I wanted to only disable interfaces (routed ports) to crypto boxes, because I don't want their ErrDisabled for 5 minutes if there is connectivity problems in the VPLS-cloud (each switch also had 3 UNI-DIRECTIONAL due to the P2MP configuration neighbors).

  Mode config-if I could do it simply with 'disable the port Uni-Directional', but I thougt it would be better (not aggressive) normal mode execution for the chance to use UNI-DIRECTIONAL-show commands. So, I have configured 'Uni-directional port' for the affected interfaces.

  interface GigabitEthernet1/2

  Uni-directional port

  !

  Parts of the show command:

  ! P2MP port to crypto-box

  Interface item in gi1/2

  Port enable the administrative configuration setting: enabled

  Port enable operational state: enabled

  (...)

  ! standard port with the default configuration

  Gi2/1 interface

  Port enable the setting of administrative configuration: default of the unit follows

  Port enable operational state: active / aggressive mode

  (...)

  I was very surprised to discover that a single interface will still in State of ErrDisable after discovering an error UNI-DIRECTIONAL:

  % UNI-DIRECTIONAL-4-UDLD_PORT_DISABLED: UNI-DIRECTIONAL disabled interface item in gi1/2, detected one-way binding

  % Of PM-4-ERR_DISABLE: Uni-directional error detected on item in gi1/2, by putting the gi1/2 item in condition of err - disable

  Now, I'm stumped: have I misunderstood the difference between normal and aggressive mode? Or something wrong with my setup?

  IOS version: 12.2 (54) SG

  Thank you

  Rolf

  What I don't understand is why it ends up in errdisable state when it's configured in normal mode.

  You have configured UNI-DIRECTIONAL on BOTH sides right?

  If the answer is Yes, then I recommend that you enable the record link "enable connection logging" on the interface to determine if you have a potential problem with this link.

  Furthermore, this link is the fiber optic, no?

  If this is not the case, UNI-DIRECTIONAL is good if you have fiber.  I would recommend not UNI-DIRECTIONAL on a link of copper.

• UNI-DIRECTIONAL press UCS 6248 interconnections of fabric?

  Hello

  If possible, I'd like to see a UNI-DIRECTIONAL between my 5548 neighbor was cheating Nexus and my 6248 interconnection fabric.

  UNI-DIRECTIONAL feature is supported by the 5548 s and easily activated.

  However, I can't find any information on how to activate on the UCS FI ports uplink ethernet. Is this possible?

  Thank you.

  Hello

  UNI-DIRECTIONAL UCS FINANCIAL support will be available in the next version major i.e UCSM 2.2

  UNI-DIRECTIONAL feature is currently not available on the FI.

  HTH

  Padma

• Paint chooses contour when I click Fill Uni

  I got my new computer with windows 7 for a month now, and more later than yesterday when I chose 'rectangle', 'black', "solid fill color", he would make a rectangle of schema only. I tried again today and the same thing. I can't pull a Uni fill rectangle or square.

  I even tried the 'selection' and 'rectangle' in combination with others, but not luck.

  I use the rectangle solid fill more than any other tool to reframe my work.

  I hope someone can help me.

  Thank you

  Stu

  Any help in this tutorial?

  With the help of paint
  http://Windows.Microsoft.com/en-us/Windows7/using-paint

  Before you draw your rectangle fill color selection in color 2 and see if it works when you make your rectangle.

• Why make it so difficult to fix and or repair a product Microsoft, i.e. "Uni-bleu Registery Booster?"

  Dear Customer Service complaint Department,

  In general, I was happy with Microsoft products.  But my experience since download "Uni-bleu Registry Booster" has been a nightmare for me.  It did nothing for me, since I downloaded this software several months ago.

  Please, let me explain:

  When I downloaded "Uni-bleu Registry Booster", it constantly gives me the same error messages whenever I pulled my computer; It doesn't matter what I do to try to fix the message!  My choice was "Yes' or 'no, etc."   I tried to repair the program, and when I got always the same error messages, despite my efforts, I finally tried to remove it.   Yet, my ability to remove "of Nations United-ible," who I am able to remove all unwanted software in the past, I can't fix or remove this program without value.

  I'm sorry, it my written words may seem harsh, but I don't think you have any idea what I have described one above, as my complaint States: I think you're incompetent in the understanding of the English language, if you did, I would have solved the problem myself.

  Please, let me inform you; I am a student of Leibniz, and I understand the "principle of action less.".  I have, if I, have you been in your place, I'd do the usability of your software easier, when the conflict resolution when the software has difficulties in operating in the computer, the software has been downloaded to.   If you do this, you would serve the people in a more effective way and your profits would rise.

  In other words, why people must pass through so many hoops to solve a problem, they face?  If you can answer this question, you will be able to better compete with the Apple.

  Fred
   
  Fred

  Fred,

  WOT reputation Scorecard

  Uniblue.com

  http://www.MyWOT.com/en/scorecard/www.Uniblue.com

  UTC/GMT is 11:11 on Tuesday, October 9, 2012

• Reader 11.0.11 prints page size 4 x 5 black Uni. 10.1.13 print very well.

  Reader 11.0.11 prints page size 4 x 5 black Uni. 10.1.13 print very well.

  Hi, Lucette,.

  Let's start there then. You will find printed as picture in the print options advanced (found to the right of the name of the printer in the print drive dialog box). Do I understand correctly that the file prints OK largest size paper?

  You can also consider to update Acrobat Reader DC, which is the current version. You can get from here: https://get.adobe.com/reader.

  (My father * always * transported cards in the pocket of his shirt.) Never leave home without them!)

  Best,

  Sara

• Photoshop CC window is black Uni on the 2nd monitor

  • What version of Photoshop? Photoshop CC 14.0 x 64
  • You have installed recent updates? Yes
  • What operating system? Mac OS X 10.8.4
  • What type (s) of the image files? Affecting the PSD files and jpg. Png no, those who work
  • If you get error messages, what is the full text of the error message? No error message
  • What you were doing when the problem occurred? Implemented new monitor.
  • He has already worked before? No and Yes, monitor is new, but I still Photoshop CS6 and works very well.
  • Other what software do you use? Right now: Chrome, HAVE, calendar, Textedit, and system preferences.
  • Tell us about your hardware. MacBook Pro 15 "Retina display (set to the parameter 'More space'), 8 GB of RAM, i7 2.4 GHz, 172 GB of free space on the SSD drive. The monitor is Hannspree HE225DPB 1920 x 1080 at 60 Hz
  • He has already worked before? This question has worked when he asked the first time.

  As I drag the window back between the external screen and my laptop screen, the previous state is displayed briefly. When I drag it to the external monitor, it seems ok for a fraction of a second in vertical strips that refresh for black Uni. Even when I'm dragging the window to the rear, the window remains black on my main laptop screen until it refreshes back to normal, in the same way vertical strip. The frame of the window, including the leaders seems ok, but the area of the image, including the color of the canvas to become black. This darkness can be captured in a screenshot.

  On the PNG that works, I get some black as the image is resized between displays (stays at 100%, but on lower res screen what it double in size). In CS6, the image is not resized, changes in % (16.67 on external, 33.33% on laptop) and rest about the same size.

  Maybe it's more than a bug that something I can do anything, but I am unable to connect to Photoshop.com (someone else has already posted about here, 5 days ago, no responses yet), I get a message 'it is therefore possible to create an account', even if I already have an account.

  Thank you.

  There is an option under preferences performance to use the GPU (in my MBP 13, an Intel HD GPU 3000).

  If put into it, so okay, then turned back on it.  Everything seems to work now.

• My symbols transformed into a red fill color Uni

  It happened to my students a few times.  They are objects that have been transformed into symbols.  And at some point, they turn into a red fill color Uni.  they still look like that when you click on one of them to the library.  I can't understand how they were obtained in this way, and Cancel is not cancel it.

  In the past I encountered this when the Break Apart command is used on an image and then the image is removed from the library.  There may be other conditions that could lead to it.

• Downloaded 8.0 and now can't access working library as it redirects to the proxy of my uni?

  After a series of accidents when the hotmail and gmail, I received a message to download Firefox Setup 8.0, which I finished yesterday. This solved my problems of e-mail. However, I have now tried to access my e-library work, but despite being on the right site with all the macros OK journal, when I click to go to the electronic library (which should give me), direct entry I find myself being diverted to the proxy of my University Library, which (of course) does not give me access to my library of work. I use Zotero, which helps to provide an answer to my problem. Any ideas how I can fix this problem?

  Thanks a lot for your answer. I will keep this in mind - I only checked to have downloaded Firefox Setup 8.0 (2) .exe (which I happened to find sitting in the toolbar, and it's not because I've been invited to download). This seems to have solved now redirect to a server incorrect proxy - the only thing that remains to be done is to find why I have a blank page when I get redirected to the correct e-library! I will contact the administrator of this site. Thanks again for your suggestion. I will certainly use it if I have more problems.