Uninstall norton internet security

I uninstalled norton internet security so that I can install my antivirus... but when I go to install mine it says me that norton is still installed and when I go in install and uninstall, I think it's still there. If I try and unistall it again, he says "the specified module could not be found... and it shows that Norton has 16 MB always installed. How can I get rid of all the norton so I can install my antivirus... thanx

Hello

Use the Norton removal tool:

Be sure to check with their website for instructions and removal tools to remove ANY legitimate product security.

If you have Norton, McAfee or other on this machine, you will need to get their uninstall tool, even if you have uninstalled it
Since most of the remains of leave.

Norton Removal tool
http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

Download what you intend to replace Norton with the Norton Removal Tool and

Go to where you place the Reboot - on - right click RUN AS ADMIN - tool

Then do the same for the replacement.

---------------------------------------------------------

Here is what I use:

Avast and Prevx proved extremely reliable and compatible with everything I threw at them.

Avast Home free - stop any shields you do no need unless authorized Standard, sea and the operation of the network.

Prevx - Home - free

Windows Firewall

Windows Defender

Protected IE - mode

IE 8 - SmartScreen filter WE (IE 7 phishing filter)

I also IE always start with asset if filter InPrivate IE 8.
(Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
(Double click on top of the blue icon - details look OK. - left Shields - terminate those that you don't use - I do not have)
(Use P2P, Outlook/Exchange or Messenger because I do not use these type programs - your needs may vary.)
http://www.avast.com/eng/avast_4_home.html
Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/

PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

http://www.Malwarebytes.org/

I hope this helps.

Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • Re: Uninstalled Norton Internet Security - no Internet connection

    I have laptop Satellite A210 - 11 p.

    Recently, I uninstalled Norton Internet Security, after the subscription has expired and since then, my laptop does not connect to internet.
    The internet itself works very well. I would appreciate your help and advice.

    Kris

    Hello

    Download this software and install it. Run it to clean your registry:

    http://www.WorldStart.com/Weekly-Download/Programs/regcleaner.exe

    Also, check the firewall settings, or disable it to see if you have access to the Internet.

    Welcome them

  • HP Envy M6 Simplepass finger reader will not work after you uninstall Norton internet security.

    I've seen a few problems to do with the drive of finger and Norton internet security, but I couldn't find a solution to the problem. I looked on biometric devices and it says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

    I've been on the re HP Recovery section - install drivers and applications and reinstalled the HP Simplepass program, but I do not uninstall before that I did and that's maybe why it did not work.

    What to do to make the finger drive working again?

    Kind regards

    Maddie

    Ok. So I got a new laptop that has a fingerprint sensor. I opened the Recovery Manager and see that there are TWO pieces of software that need to be installed/reinstalled.
    (1) the validity of the pilot sensor of fingerprint in the drivers section.
    (2) the SimplePass software in the software section.

    Most of the drivers and software in the Recovery Manager do not need to be uninstalled first - the installation package should do this automatically.

    If you have not already done so, install the driver of validity using Recovery Manager and restart your computer.

  • I need to uninstall Norton internet security, but can not find it listed w / other icons

    I'm currently renewing my nod 32 eset security. I should be able to go to select Norton internet security icon & control panel & remove it w / the norton removal tool. But I don't see that it listed w / all the other icons in the control panel. ESET told me its here & should be deleted.

    If you can't remove it from Add or remove programs, then you will need to use NORTON REMOVAL TOOL. It detects all versions and products of norton and delete them.

    Click on the link above and click on softpedia secure download (US).
    Download it and run it.
    Restart your computer.
    Now, you will be able to install Eset.
  • Computer hangs after you have uninstalled Norton Internet Security Suite

    I recently uninstalled Norton Security suite (it's too intrusive) and installed Microsoft Security Essentials.  Since then, the machine hangs with a black screen if it's for more than 30 minutes.  I tried to restore to a previous restore point, but the machine to restore to the previous point (I also tried in safe mode).  I went to the site of Norton and their uninstall program to ensure that all of the Norton was out of my machine.  Also, the machine will now not install the automatic updates from Microsoft (I have 4 in the meantime), even if I try manually.

    My operating system is XP Professional SP3
    Help

    Hi BobHartsell,

    You can uninstall Microsoft Security Essentials from Add / Remove Programs. Then try to install the updates.

    Reference: How to manually uninstall Microsoft Security Essentials if you cannot uninstall using Add / Remove Programs

    As you are facing the issue after installing Microsoft Security Essentials, you can also contact support for Microsoft Security Essentials for assistance.

    Center solutions Microsoft Security Essentials

    Hope the helps of information.

    Please post back and we do know.

  • Norton Internet Security trial version stopped working and asked me to uninstall and reinstall

    Norton Internet Security has stopped working and asked me to uninstall and reinstall.

    I uninstalled, now I can't seem to find a way to reinstall it.

    Either way, it was the evaluation version of the security of the software that came with it since I bought it just 3 days ago. So I have all the disks for the software.

    How can I reinstall it? And the last days of my stay of the trial?

    Hoping for an answer.

    -YK

    Hello

    Please use the following link:

    http://www.Symantec-Norton.com/Norton_Internet_Security_Free_30-Day_Trial_p132.aspx?lang=en-AU&par=goo_auft_norton_internet_security_trial_version&gclid=CJanqNSlqLwCFUQRpAodHAYAyA

    Why do you need it? Windows Defender will do the job and please note: nobody knows better than Microsoft Windows.

    Kind regards.

  • Uninstall My 2007 Norton internet security

    Hello, I have Norton Internet Security 2007 and I try to uninstall. I can't even open the program, I used the system restore, then uninstall it then, then recovered again system. I would like to know how to get rid of it. PLEASE HELP ME!

    Try this.

    Norton Removal Tool
    http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

    Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

  • ccSvcHst.exe"(Norton Internet Security) - appears in the section Customize the Notification area after you have uninstalled all Norton products

    Why "ccsvchst.exe" (Norton Internet Security) shows in the section Customize the Notification area after you have uninstalled all Norton products on my Windows 7 PC (laptop Samsung)?  What's in this file and it is actively do anything on my pc?  Thank you.

    Maybe you need to rid your computer of Norton more completely.
     
  • NORTON INTERNET SECURITY WILL NOT INTERFERE W UPGRADE TO EL CAPITAN?

    The Norton Internet Security software interference of the upgrade process w at El Capitan? 10.8.5 running in an iMac 2011 class w 16 GB of memory and, in view of the comments, am paranoid re: upgrade and anything that could it confuses.

    Mac do not need of any kind, including Norton anti-virus programs.  There is no virus for OS X currently, so anti-virus programs are not fundamentally necessary at this time.  Completely uninstall instructions for the developer.  Regarding the upgrade to El Capitan in general, make sure that you have a full backup of your system or with Time Machine or something like CarbonCopyCloner.  If you want, you could also partition your hard drive and install El Capitan top to 'test drive' so to speak, to see if you really like it.

    It also goes without saying that you must ensure that all your applications are updated to work with El Capitan.

  • Qosmio G30 freezes at startup of Norton Internet Security 2008

    Norton Internet Security 2008 will freeze my computer because soon, it attempts to load and the only way to do is to restart the system by pressing the on/off key.

    My laptop is a Toshiba Qosmio G30-177 (model No. PQG32E-02G022GR) with Vista Ultimate and pre-installed NIS2007. I have no problem with this NIS2008 version on my other laptop (Qosmio F10 - PQF10E-02300JGR, WinXP MCE).
    NIS2007 works well on my G30 and I have no problems at all, but more recent versions of NIS seem to be in conflict with my system:

    1. I am able to install and run the new version, download all updates and adjusting the settings. Maybe, a couple days later my computer freezes after start in exactly when the NIS tray icon appears. For a few seconds there is simply no response of the system at all and the LED of my laptop show that any HD activity has ceased. After having been inactive during those seconds, the cooling fan will start to operate at maximum power, creating a huge noise that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs. Force a reboot, that's all I can do.

    2. now, this time, I rebooted my laptop successfully even once (took a few attempts) and it all of a sudden not freeze. Then I disabled the firewall and auto-protect at all times, so there was no freezing at startup and I just had to enable both the firewall and auto-protect after start manually. In order to avoid the gel again after the reboot, I always disabled NIS before shutdown. For one or two days of workaround has been quite successful.

    3. all of a sudden, after one or two days, this work around will become useless, because the system begins to freeze again at the time of the icon is displayed. In this case, restart has no effect at all, and NIS will continue to freeze at startup. I also tried to prevent form from NIS to ccApp.exe run automatically at startup (administrative tools > system configuration > "Startup" tab). It's successful and my laptop is able to start normally, but if later I try to start NIS manually, it will freeze again.

    I had this problem since NIS2008 just came out, so I thought that at the same time an update Windows or Norton may have solved the problem, but this weekend I gave another NIS2008 trying without success. I'm pretty sure that the problem is not caused by other software than Windows or Norton, because I also tried to install NIS after a full system recovery, so I've only preinstalled NIS2007 and Vista on my laptop. I use Norton removal tool and follow the instructions to uninstall before attempting to install the new version of course.
    My last hope was that the version of NIS2009beta somehow would not freeze my system, but it does. It does not matter if I try to start 2008 or version 2009beta, the problem is exactly the same.

    What really motivates me almost crazy is the fact that NIS works perfectly for a while, then needs enough small workaround, and then after some time completely refuses to work. In these two days I do not change system settings, install or uninstall programs or doing whatever it is that I felt might conflict with NIS...
    So far, I have no idea of the solution and have again use NIS2007.

    Someone knows how to fix this?

    Hello

    To be honest I don t use the Norton internet security because it slows down the performance of the laptop and he needs too many resources.
    I used the NIS06 and after several months of use I removed it from my system for the reasons mentioned above.

    I put really know what might be a problem with your Norton Internet Security but I guess its associated software question maybe there are a few compatibility issues with vista and NIS08. Who knows...

    In my opinion, you should first check the Symantec Web site for more details.
    Maybe these questions are mentioned somewhere in the FAQ section and maybe some updates or patches are available.

    Good bye

  • no fingerprint reader after fixing Norton Internet Security

    I just got a dv6tqe of Pavilion, and there was a problem with the protection of Norton Internet Security SONAR that required me to remove the Norton software and then re - install.  However, once I did this, the fingerprint reader no longer works.  The computer says there is no biometric device installed on the computer.  How can I do to fix this problem?

    Hello

    The registry entries must be corrected by reinstalling the driver from the sensor as would any configuration error.  First, download the setup of the sensor driver and save the package on your desktop.  Then, if the current entry appear in programs and features (it is often labeled as driver validity sensor), it may be best to uninstall the existing driver first, restart the computer, install the driver by double clicking on the package that you saved on your desktop and restart the laptop.  You should find it works now.

    Kind regards

    DP - K

  • HP envy 14-2090eo: Norton Internet Security causing BSOD

    Hi HP experts...

    The first time a bought a laptop, I have Norton Internet Security installed my antivirus preferred, but on this laptop, I have experienced the BSOD, when opening the software Norton Internet Security to access the user interface, and this problem has existed since the Internet Explorer 10 and 11 happened, so im still only able to have installed the version of Internet Explorer 9 to avoid the BSOD´s. I used the Norton Internet Security 2004 and only known problems on this laptop, I also have many cell members and friends families, where I also installed this antivirus on and also a couple of them are HP products, but they do not know these problems? Can anyone tell me if there is a way to work around this problem, so I can install the latest Internet Explorer, I guess there are a lot of security better connected for new versions of Solution Explorer, so may not be the safest way to have IE installed 9... I guess it must be a problem of Hp with this specific model.

    Hope to hear from you soon - best regards Hpenvy1

    IMHO, uninstall Norton using the Norton removal tool can perform the required updates.  Then run Norton Power Eraser. It would in my opinion to use a different anti-virus.  A lot can be installed to a "30 day trial" until you find one that you like.  If you are resolved to Norton, give them a chance to fix or to visit their forums.  If it's a widespread problem, others will have similar problems.

  • Norton Internet Security 2011 - shows high utilization of the processor by Real Player.

    • I downloaded thousands of images on the web.
    • I have Real Player installed on my computer, but never use it.
    • I use Microsoft Picture It (2006) to change some of these images.
    • I just upgraded from Norton Inrernet Security 2010 to 2011.
    • I started receiving alerts of CPU high after installation of 2011.
    • I don't know if Norton I.S. 2010 was the CPU usage monitored if not then that would explain why I wasn't allerted in the past.
    • Norton Internet Security 2011 control CPU usage resulting in alerts.
    • Now that I'm aware of this abnormal situation, I realized that it must be resolved.
    • I wanted to remove the pictures of Real Player and keep them in "MY pictures", and then uninstall Real Player.
    • Once I have remove Real Player, they are deleted from "my pictures".
    • What do you suggest me to retrieve photos and maintain settings sure opperating regarding the CPU
    • It is an H.P. AMD X 64 Dual Core processor, Ram 3 GB, 600 GB HDD.
    • Any suggestions would be greatly appreciated, your will allow me to win a lot of sleepless nights and a ton of asperin.
    • Thank you

    Thank you for your time & consideration... Celestyna

    It is unlikely that RealPlayer is keep a copy separate from your photos. It is probably just reference your pictures folder. In this case, you can just uninstall RealPlayer.

    Everything you deleted must be in your Recycle Bin unless you have emptied. If this isn't the case, you can try this program freehttp://www.filehippo.com/download_recuva . The chances of getting them back are reduced more you use your computer.

    You should keep a copy of your data on an external hard drive. What would you do if your computer crashed or was stolen?

  • Problems with the closure, by opening the Task Manager and Norton Internet Security. Help, please!

    Hello

    I have a HP Pavilion dv7 with Windows Vista Home Premium (64-bit). Until Monday, there is no problem whatsoever with my computer at all. I have not installed or uninstalled, whatever it be, changed settings, done anything differently with my computer. Suddenly it now "hangs" on the screen of closing down. I'll try to reboot or stop using the menu start, and it will stay on this screen indefinitely. Now, I have to manually turn off the computer. I spent on the Support page and studied the Performance issues, and all I get is I have Visual settings that interfere with closing... except my Visual settings have not changed in any way. In addition, I can not properly update my computer or do a system restore because the computer will shut down.

    In addition, the Task Manager will appear no more. I'll press ctrl alt del and nothing appears, just the green icon in the corner of the screen. If I try to right click, no response.

    I tried to do a full system scan in Norton Internet Security but she "leaves" scanning. It will scan correctly when I'm in safe mode, but it comes with no virus, trojan or other problem.

    So in essence, I tried everything I can think of to fix my computer nothing works. It was working perfectly before this week. I have no idea where to go. Any thoughts?

    Thanks in advance,

    G

    Hello
     
     
    Method 1.
    First check to see if there are external devices attached to the computer, if so remove and check.
     
    Method 2.
    Step A.

    Start your computer in safe mode and check if it starts.
     
    Step B.
    If it starts on the desktop in safe mode and then set your computer to the clean boot and check if it starts successfully. If it starts successfully can be a third-party application or service is causing the problem. We can use the approach 50 / 50 to narrow down the root cause of the problem.

    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
     
     
    Method 3.
    I recommend to run the restore of the system in safe mode and check if it works very well.
    Reference:
    System Restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
    Note: If you use system restore when the computer is in safe mode, you can not undo the restore operation. However, you can run System Restore again and choose a different restore point if any.
     
     
    I hope this helps.
     

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows Defender and Norton Internet Security

    Receipt of HP Pavilion for Christmas; provided with Windows 8.  I've updated to 8.1 Windows

    Am I right that since I was on Windows Defender I have do I UNINSTALL the trial version of Norton Internet Security, which is preloaded on my PC?

    Is the only program I should be running for safety?

    Thank you.

    Hello:

    Please watch this video.

    http://www.YouTube.com/watch?v=JD70CdZt-BC

Maybe you are looking for

  • Incorrect RAM / missing

    I have an old Mac Pro model that was purchased with 26 GB of RAM, this has always been shown as well on the subject this Mac screen. However a few weeks ago I noticed that it showed only 16 concerts as being installed. And more recently he has droppe

  • Waterways 11 - how to remove the recovery partition?

    Hello I have created a recovery USB disk and I would like to release some storage by removing the partition reocvery however the HP Recovery Manager doesn't have the function to do. How can I delete the recovery partition?

  • MORE BIG SATELLITE 2595CDT-COMPATIBLE HARD DRIVE?

    Hello I'm new to this forum.I have this problem.I want to improve my 6.4 GB hard drive in the Toshiba Satellite 2595CDT (acquired in the United States).I sent an email to Toshiba America and their Division of storage devices, but they keep forward me

  • Satellite Pro A100-622 - Realtek driver compatible to Windows 7?

    I have a Satellite Pro A100-622Part number: PSAAPE-00F005ENCurrent OS: Vista Home Basic (OEM) I would like to upgrade to Windows 7 Professional (less than £50 for the educational license). I run Windows 7 Upgrade Advisor and this indicates that all d

  • BSOD (DRIVER_IRQL_NOT_LESS_OR_EQUAL igdkmd64.sys)

    Hi, I am facing the problem of BSOD - DRIVER_IRQL_NOT_LESS_OR_EQUAL igdkmd64.sys on my laptop (HP ENVY 15-j126tx) OS: Windows 8.1 Intel HD Graphics 4600 with the version of the driver 10.18.10.3277 I try updating the driver, but the problem doesn't s