Uninstall Oracle 11.2.0.2 grid single-instance ASM in AIX

Similar Questions

• RAC's RMAN backup restore single-instance ASM

  Hello
  
  We use oracle 11 g 2 on AIX 6.1,
  
  We need restore the backup RMAN of CARS to the single ASM instance.
  
  IM new CARS & ASM, what will change
  
  What are the steps involved in it.
  
  
  Thank you

  Hello

  See this doc MOS * backups RMAN disk HowTo restore database RAC to single Instance on another node [415579.1 ID] *.

  On the Single-Instance ASM, you must specify the name of diskgroup for «control_files, db_create_file_dest» settings

  Handle: user10745179
  E-mail: [email protected]
  Status level: Rookie (5)
  Join date: February 24, 2009
  Messages total: 168
  Total Questions: 74 (52 pending)
  Name dhaine
  Location Mumbai

  If you feel that your questions have been answered, then please consider the son of fence by providing appropriate points. Please clean the forum!

  Kind regards
  Shivananda

• Single-instance ASM for several DB

  Hi Expertise,
  Is it possible to use the single ASM instance to several Oracle database. Here DSO Server and all database servers are in another server or machine.

  822146 wrote:
  Thanks for your information.
  My scenario is little different, here ASM instance and database instance is search in different physical servers.

  Can post you?

  The ASM instance must reside on the same server with database instances.

  See you soon

• Single-instance ASM

  Hello.
  
  I installed IM 11.2.0.3. In order not to run the installation with IG unprotected, I used installation 'software only '. Then I installed IM PSU "OPatch auto. PSU has been installed with messages failing to stop. Start clusterware ('crsctl' file is not found). Is this a normal behavior?
  I then used asmca, but it failed because the GI has not been configured. At GI how written documentation set up GI for cluster (crs/config/config.sh), but no info for stand-alone server. Do I have to reinstall IM using "Server independent" installation and after that install the power supply?

  I installed IM 11.2.0.3. In order not to run the installation with IG unprotected, I used installation 'software only '. Then I installed IM PSU "OPatch auto. PSU has been installed with messages failing to stop. Start clusterware ('crsctl' file is not found). Is this a normal behavior?

  Yes. Oracle uses different versions of binaries for stand-alone server and cluster. crsctl is missing until you configure GI.

  I then used asmca, but it failed because the GI has not been configured. At GI how written documentation set up GI for cluster (crs/config/config.sh), but no info for stand-alone server. Do I have to reinstall IM using "Server independent" installation and after that install the power supply?

  You can configure GI with the following command as root:

  $GRID_HOME/perl/bin/perl -I$GRID_HOME/perl/lib -I$GRID_HOME/crs/install $GRID_HOME/crs/install/roothas.pl
  

• Uninstall oracle software

  Hi all
  I want to uninstall oracle 11g software. There is no instance. I run the program and when I run universal installation remove the greeting received oracle. I have to open CLI and type:
  
  C:\Users\___ > f:\app\oracle\product\11.2.0\db_1/deinstall/deinstall
  
  Ultimately, I got error:
  Failed to remove service 'OracleOraDb11g_home1ClrAgent' on the local node.
  Oracle Universal Installer cleanup completed with errors.
  
  So I can't yet delete sw and app folder. How can I remove oracle sw?
  
  My OS is Windows 7.
  
  Kind regards
  Rustam
  
  Edited by: rustam_tj may 18, 2011 09:09

  Salvation;

  Pelase check my blog entery:
  http://heliosguneserol.WordPress.com/2010/10/27/how-to-remove-Oracle-11gr2-on-Windows-7/

  Respect of
  HELIOS

• Single Instance Oracle 11.2.0.4.7 with GRID + ASM - AMT headphone attack Poison Fix?

  I'm under a single Instance Oracle 11.2.0.4.7 with GRID + ASM database on Red Hat Enterprise Linux 5.7. I'm trying to fix the infamous TNS Listener Poison attack vulnerability. I tried to implement the COST using this guide (Doc ID 1453883.1) but it doesn't seem to work as it still appears on a scan of the retina. I can't get a remote listener to register to test the vulnerability, and it does not appear in the log listener xml as a registration or denied. Don't know what I'm doing wrong.

  
  

  I added this to my listener.ora:

  SECURE_REGISTER_LISTENER_PROD = (CPI, TCP)

  The Alternative fix to the COST must turn off dynamic registration but I can do it when executing grid with the DSO with only a single instance database?

  How can I fix with my setup?

  You would implement better VNCR on 11.2.0.4:

  for CARS: 1914282.1

  the properties of a single instance: 1600630.1

• Question about uninstalling Oracle Grid Infrastructure software

  
  Hello! I create a new cluster of CARS on IBM Power 7 server running AIX 6.1. I installed grid Infrastructure 11.2.0.3 as a 'practice' race, but I would like to make a few changes. I remember reading about a year on the Oracle uninstall utility 11g. Although it is installed as part of the software, it was recommended at that time to download the OTN deinstall utility.

  That it is always recommended, or can I just run the deinstall utility in my house grid Infrastructure?

  Thank you

  Mark

  Hello

  Please check below notes:

  11 GR 2 CARS: how re - install the grid Infrastructure without disrupting the facilities of RDBMS. [1276975.1 ID]

  Oracle has uninstall utility - 11 g R2 [ID 886184.1]

  Way of GR 11, 2 failed Installation of infrastructure (CRS) grid [ID 942166.1]

  11 GR 2 grid infrastructure - uninstall the rootcrs.pl script failed [1174384.1 ID]

  And please read this link: How to change or uninstall Oracle Grid Infrastructure

  Thank you

• can we use Grid Infrastructure 11.2 to protect a single instance database?

  Hi all
  
  I would use Oracle Grid Infrastructure to protect a single instance database.
  I found these documents:
  http://www.Oracle.com/technetwork/products/Clusterware/overview/em-DB-failover-128585.PDF (for 10.2)
  http://www.Oracle.com/technetwork/products/Clusterware/overview/SI-DB-failover-11g-134623.PDF (by 11.1)
  
  I was unable to find a similar document for 11.2 GI. Do you know if such a document exists?
  
  At the moment I only know that the IM is free if used for Oracle products, but I'm not shure if it can be used for external applications one-time protext or databases
  
  Andrea

  Hello

  While it is still working (failover scripts you find in the demo folder $GI_HOME7/src/demo/coldfailover), the document does not exist, because with 11 GR 2, there is a solution to support called RAC ONE node, so make the manual configuration of obsolete.

  For more information, see:

  Oracle Clusterware and Application failover management (Doc ID 790189.1)

  Concerning

  Sebastian

• Uninstalling Oracle 11 g RAC from a Windows Server 2008 Server

  Try to uninstall Oracle 11 g RAC from a Windows Server 2008.
  
  Following the instructions: http://docs.oracle.com/cd/E11882_01/install.112/e25666/rem_orcl.htm
  
  I was able to run the batch: C:\app\oracle\product > 11.2.0\dbhome_1\deinstall\deinstall.bat
  
  Last messages spoke uninstall successfully.
  
  However, I had problems trying to delete the folder directory. According
  Oracle forums, on Windows there are known problems this generic
  "svchost.exe" process blocks some Oracle DLLs at startup time. To solve
  the question that I followed the instructions:
  
  (1) rename %ORACLE_HOME%\bin to something else 2) reboot the machine 3) now remove the complete file
  
  Then I went to the registry and delete the key: HKEY_LOCAL_MACHINE\SOFTWARE\Oracle
  
  Restart the machine.
  
  Problem is that Oracle Services still exists on Windows Services (services.msc). So I see it again:
  
  -Oracle Service object
  -OracleASMService + ASM1
  -OracleJobSchedulerINTER1
  -OracleOHService
  -OracleOraCrs11g_home1TNSListener
  -OracleOraCrs11g_home1TNSListenerLISTENER_SCAN1
  -OracleServiceINTER1
  These services link to executable files are deleted as:
  
  C:\app\11.2.0\grid\BIN\TNSLSNR
  
  because directory folder has been deleted.
  
  What should I do to remove these Windows services?

  Hello

  You can try the following command to remove services in windows server 2008

  Since the prompt command (run as administrator)

  Prompt > sc delete "service name".

  In this case, your command would look like

  Prompt > sc delete "Oracle Service object.

  Let me know if it helps

  See you soon,.
  Gopi

  Published by: techie_it on October 1, 2012 04:00

• Uninstall oracle 11 g Enterprise edition

  Hello, I've been installing oracle enterprise edition 11.2 g and my pc closed down. It has installed but I don't know if I would have done in any other setting, so I want to uninstall it.
  
  I run the Deinstall command in the command prompt and it asks me to write: specify all headphones single instance that must be configured out [LISTENING]:
  
  Can you tell me how I can find headphones that I should write about? Thank you.

  HIE the "Enter" button to accept the default settings - the default listener name is LISTENER, so that should be enough

  HTH
  Srini

• How to uninstall Oracle Database 11 g release 2?

  Hello
  I want to uninstall Oracle Database 11 g release 2.
  
  Im running the deinstall.bat that is located on:
  C:\app\MachineName\product\11.2.0\dbhome_2\deinstall
  
  then in the command window, I get this message:
  Specify all headphones single instance that must be configured out [LISTENING]:
  
  What should I enter here?
  What is an auditor?
  
  Thank you...

  Generally, the default value (BACKSPACE) is correct.

  The listener is the network feature which helps you connect. He listens to new connection attempts.

  I like to think it's a traffic COP that allows a connection, but has nothing to do with later.

  The listener is a named process that is running on the Oracle server, waiting for requests from the client to connect to the Instance.

  The listener does not normally handle connections once the original request was made. The listen listen on a default port is 1521.

  Best regards

  mseberg

• How to install the s/w for GR 11, 2 single-instance database grid

  Hello
  I have a single instance node. I want to install grid s/w to use mainly the restart function. I do not use ASM. Is it possible to use the s/w without ASM grid infrastructure?
  
  Thank you
  Lalita
  
  Published by: user12131417 on January 10, 2011 13:19

  Hi Olivier,.
  Welcome to the Forum...

  Oracle ASM is installed with Oracle restart, but the DSO is not mandatory to use with Oracle Restart.
  You can use the Oracle restart without installing the DSO.

  During the installation of network infrastructure, choose option: grid software Infrastructure only

  After installation, you will be asked to run root.sh at the end of the run the root.sh script will report a procedure to configure only Oracle Restart (for stand-alone server grid Infrastructure)

  Kind regards
  Levi Pereira

  Published by: Levi Pereira, January 10, 2011 20:28

• Why ORACLE HOME USER 12.1.0.2 LIMITED to SINGLE INSTANCE?

  Thank you for taking my question!

  
  I installed my first database 11g to 12.1.0.2 under windows (no cars).  I need help understanding new ORACLE HOME of the USER to affect my c 12 databases.

  
  The documentation below States "when YES creates the account of USER ORACLE HOME it can only be used by a database unique instance".  I don't understand why I can't add another instance and use the same YES program created the USER account to the HOME of ORACLE page?  Why choice is (1) differs from the number of choices (2) given that both can be local accounts?   In addition, if you are unable to sign the USER ORACLE HOME, how that affects the OEM or OEM agent running on the database target?

  Thank you!

  Kathie

  When installing YES offers three options to associate a user Oracle Home of the Oracle home:

  1. leave YES create a new user account to do as a user in the Oracle home page.
  This option of the newly created user has the rights to connect to the server.
  This can only be used for Single Instance databases.

  
  2. Select an existing local or a domain as account being the user Oracle Home.
  If the existing account has login privileges, then Oracle Home user will have login rights to the server.
  This must be a nonadministrator user.

  
  3. Select a built-in account as the user Oracle Home.
  In this local Service option / built-in account Local system will become user Oracle Home.

  So if you do not use CARS, so it's no problem. The documentation seems to say that Option 1 cannot be used with CARS, not Option 1 cannot be used with multiple instances.

• To uninstall Oracle 11 g R2 Linux 6.6

  Dear forum helping!

  I have oracle 11g r2 installed on Linux 6.6 on VMworkstation 11.0.0 build-2305329

  initially do you less space when installing database, he gave me the low error disk volumes

  It will not be able to install the database configuration wizard

  Cancel or ignore

  I should have an abortion, but I chose to ignore that was my mistake

  Later I have a free memory

  Now I want to uninstall oracle 11 g linux 2

  found the link

  http://dbakevin.blogspot.in/2012/04/deinstall-Oracle-11g-on-Linux.html

  Can anyone tell

  using the. / deintsall

  I will be a loser

  (1) groups and users.

  (2) clean the oracle directory

  (3) you will need to reconfigure

  /Home/Oracle/.bash_profile

  / etc/oratab

  /etc/sysctl.conf

  As I have not installed the wizard of the Oracle Configuration

  (which was my mistake)

  is the the right option to run. / Uninstall

  When it fails to install Oracle it can leave ghost process behind that will avoid a re-installation. You have not specified a what you have exactly, but usually, it will be sufficient if you remove Oracle software as root, restart the system and try again:

  For example:

  # rm - rf/U01/U02 /u03

  # f/etc/oratab rm

  # rm f /var/opt/oracle/oraInst.loc

  # rm f/usr/local/bin/dbstart/usr/local/bin/dbshut

  # shutdown - r now

  There may be several files, which I do not remember all of the memory and it depends on what you have installed, for example, ASM, but I think that should do the trick for you to reinstall the software.

• not able to uninstall oracle 10g, how I uninstall oracle 10g IAM?

  actually iam using oracle10g in my laptop. now I just want to change for oracle 11g. I tried to uninstall 10g it shows uninstalled successfully. but when I tried to install 11g it shows already oracle is installed on your laptop...

  now how do I install 11g without formatting... can my drive you give me the solution for this...

  Hello

  You must uninstall oracle 10g by

  1.Oracle Universal Installer from Start menu

  2. Run regedit.exe and delete the HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE key.

    This contains registry entries for all Oracle products.

  3 make sure that he didn't there no service oracle left behind in the services Panel

  4 restart your computer

  5.Delete the "C:\Oracle" directory, or the oracle_base directory on which you had installed oracle 10g

  regards,

  -DM