Uninstalling ATI catalyst Manager and ATI catalyst control center.

Similar Questions

• Catalyst Control Center does not (hp pavilion dv6)

  I downloaded Catalyst Control Center several times, but it still does not. I have Paviliion dv6-6120se, AMD radeon hd 6490M and integrated intel GPU hd 3000 the two GPU works well but the problem started when I uninstalled the Catalyst Control Center to obtain a new update site Web of AMD. But the site says my version of the radeon hd 6490 M AMD does not support in any way I tried everything I uninstalled the driver of ATI GPU and install again. Somehow, I downloaded Catalyst Control Center and the installation is complete and the same problem, it's still not working. Please any help would be appreciated. Now, I've lost the Catalyst Control Center and the switchable graphics config. help please.

  Hello

  As you have switchable graphics, you will need to download and install the driver of HP - it is on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• ATI Catalyst Install Manager and Catalyst Control Center help

  I just run the Windows 7 upgrade

  report from the consultant and he said that I have to uninstall the ATI Catalyst Install Manager and Catalyst Control Center and then reinstall after upgrade...

  Could someone direct me to where I could t find these programs for Windows 7

  You should not do this. Just proceed with the upgrade installation.
  On my Satellite, I got the same message, but I just kept with upgrade.
  At the end everything went well.

• Catalyst control center and ati driver problem

  I installed Nvidia Geoforce GT630 in my Inspiron 570... Windows 7... 8 GB ram

  Processor a Main Circuit Board b3.00 gigahertz AMD Athlon II X2 250256 kilobyte primary memory cache2048 kilobyte secondary memory cache64-bit readyMulti-core (2 total)Not hyper-threadedBoard: Dell Inc. 04GJJT A00Serial Number: ..Bus Clock: 200 megahertzBIOS: Dell Inc. A05 12/20/2010
  

  A window pops up with ATI Warning and the following message:
  

  "Catalyst control center is not supported by the driver version of your enabled graphics adapter.
  

  Please update your ATI graphics driver, or enable your ATI adapter using the Displays Manager"
  

  ----
  

  I can't find the ATI adapter in the Displays Manager. I seraced for a new ati driver but didn't find anything for my puter.
  

  Also, in the PNY instructions it had the following....which I could not find:
  

  If you purchased a PHNY GeForce PCI grapics card and if you have on-board graphics,
  

  enter the system's BIOS setup and look for a setting called "Primary Display Adapter" or something
  

  similar. Set this to "PCI". If you cannot locate this setting, please contact you system manufacturer blah blah blah.
  

  Anyway, there was no such setting in my BIOS.
  

  Anyone have an idea how to fix or get rid of the catalyst control center?
  

  Thanks
  

  Hi scottparat,

  Yes, please go ahead and uninstall the full program from the computer and restart the computer.

  Also in the device under the Graphics Manager that you need (either Ati or nVidia Geforce GT630).

  Please write back to us.

• WARNING: The Catalyst Control Center is not supported by the version of the graphics adapter driver you activated. If you please update your ATI graphics driver or enable your ATI card using the display manager.

  Original title:  Install the new NVIDIA GeForce GT 240 graphics card but now gets error message regarding the necessary to the old card drivers ATI Radeon.

  I just bought a new computer from AMD PHenom II quad core Dell Inspiron with Windows 7 installed. For the graphics card, an ATI RAdeon 4200 on it there but I wanted a more powerful card and installed a NVIDIA GeForce GT 240 graphics card. The ATI Radeon is not delete because honestly, I could not recognize what it should look like and thought that maybe it was incorporated. The fine installed NVIDIA card and now shows as the graphics card used by the computer Information System.

  My problem is that whenever I start my computer, I get an error message saying that the drivers for the ATI card are not compatible with the Catalyst Control Center. I think I need to disable the ATI card, but don't know how. Can you help me?

  Dell Inspiron 570 is a desktop computer, the ATI Radeon 4200 is an integrated graphics card chipset usually equipped with laptops. Something is not here.

  Go to dell support, enter your tag # and get the origonal system specifications.

  You can uninstall anything about ATI through Add/Remove dialog

• ATI Catalyst Control Center popping up a warning

  Problem with the ATI Catalyst Control Center popping up a warning whenever I connect

  Whenever I login I get a pop up with this message: ATI Warning: The Catalyst Control Center is not supported by the 28octobre your compatible graphics driver. Please update your ATI graphics driver or card from ATI enableyour using the display manager. I went to the display manager but could not know where or how to turn the ATI card. This message has just started to appear about two months after I downloaded some windows updates ago and signed on. I am running Windows Vista Raedon HD 2400 PRO.

  Hi waters choppy.

  See the link below for a thread on the forums of AMD with a similar question, try steps mentioned them.

  http://forums.AMD.com/game/messageview.cfm?CATID=260&ThreadId=105228

  If the previous step fails then uninstall all the drivers of graphics card and software the computer later download the updated driver for the site Web of AMD and check.
  http://www.AMD.com/us/products/desktop/graphics/ATI-Radeon-HD-2000/HD-2400-Pro/pages/ATI-Radeon-HD-2400-Pro-series.aspx

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ATI Catalyst Control Center simplified view do not support active graphic processor

  When I start the CCC, I get "features in the ATI Catalyst Control Center basic view do not support active graphic processor".

  I'm using ATI (not Intel).

  Driver is showing only: Version 8.633.0.0
  ATI Mobility FireGL V5700

  pci\ven_1002 & dev_9591 & subsys_212717aa

  System BIOS: 3.11 (2009-11-19)

  W500 4058-CTO on WinXP

  Uninstall-reinstall CCC and or the driver does not help. How can I fix CCC?

  Thank you

  Rick

  Now corrected to my laptop an error of ATI Catalyst Control Center.

  I had given up the uninstall/reinstall and register pluck and sweep, so I ran Intel graphics all the time.

  I voted against reinstall .NET 3.5, 3.0, 2.0... as I didn't aggravate and lose even more time, since I have a working machine.

  The other day the matrix Driver Lenovo had a video update.

  V8.712 - 100302 b - 097094C

  Applying this version fixes my ATI Catalyst Control Center.

  If this will help someone in the future, here's my ATI Catalyst install Manager report Journal of Installation:

  Hardware information
  Name ATI Radeon Graphics Processor
  Manufacturer ATI Technologies Inc.
  Device ID 0 x 9591
  Vendor ID 0 x 1002
  Code of the class 0 x 030000
  Revision ID 0x00
  ID subsystem 0 x 2127
  Subsystem vendor ID 0x17aa

  Existing packages

  Packages for installation
  Catalyst Control Center
  Final status: success
  Version of the article: 2010.0302.2233.40412
  Size: 150 MB

  ATI Catalyst Install Manager
  Final status: success
  Version of the article: 3.0.765.0
  Size: 20 MB

  ATI Display Driver
  Final status: success
  Version of the article: 8.712.0.0000
  Size: 40 MB

  Microsoft .NET Framework Version 2.0
  Final status: success
  Version of the item: 2.0.50727.42
  Size: 22 MB

  Microsoft Visual C++ 2008 SP1 Redistributable
  Final status: success
  Version of article: 9.0.30729.4148
  Size: 6 MB

  Now, that brings me to the initial problem of refresh of the external monitor around rate not exceeding is not 60 Hz. (subject for another thread)...

  http://forums.Lenovo.com/T5/W-series-ThinkPad-Laptops/W500-external-monitor-refresh-rate-above-60Hz/...

• ATI catalyst control center update for hd 7670 (mobility)

  Hello people I recently bought a HP Ppavilion g6 x 2014 book with and graphics card Radeon hd 7670 m now I want to update its drivers to the Catalyst Control Center latest! How to do this and is it drivers of mobility may be able to get the update? Please help me! and if not why isn't HP releasing new updates for these ati cards

  I understand that you want to update your AMD drivers.

  It seems that the t can be absent from g6-2014tx.  What is your laptop?  In General, the AMD driver can be placed on the provided HP driver.  It should work with switchable graphics systems and for systems that have no switchable graphics.

  An important note about updating the driver and graphic systems switchable.  If your laptop comes with switchable graphics, do NOT uninstall any HP video card driver.  This could lead to the switchable graphics system become corrupted, requiring a full recovery to solve the problem.  Drivers can be installed the driver from HP.

  A second note is to make sure that .NET Framework 4.0 is installed.  This can be checked in programs and features, or by installing it manually to be sure, it is installed.  If you need this, it can be found here.

  Instead of download the portable version of the driver, don't forget to download the desktop version of the driver.  The pilot will include desktop and mobile versions in a single package.  The latest version as of today can be found here.

  During the installation of the driver, be sure to choose custom install instead of car or express.  If you choose custom, you will be able to see a list of all the drivers and software that will be installed.  If display driver and Catalyst Control Center is listed, then you should be good to proceed with the installation.

  Let me know if that answers your question.

• ATI Catalyst Control Center 8 problem Windows

  Hello, I upgraded my ph Pavilion g series at windows 8. But now when I start it, I get the error message that ATI Catalyst Control center needs to be reinstalled. I tried a bunch of times but he returns (reinstalled, tried updates of the ATI site, nothing helps, he said: my driver is correct)

  And second, when I start it just sometimes gives a gray screen (and then I press the power button for 5 seconds to close). I think it might be related to my problem of graphics card. I'm a patient person, but I'm a little scared because I have a feeling I won't take long for my laptop to fi serious accident I have to keep doing this.

  Someone at - there of collaborative for these 2 problems I have?

  Thank you!

  Delabarre

  Hello

  Welcome to the Microsoft forums.

  You have installed the latest driver after uninstalling the driver?

  I suggest also refer to the suggestion from me from following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/Catalyst-Control-Center-failure/de8882d9-c5f7-4916-A94F-7e52582f351b

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• Do I need ATI Catalyst Control Center to run Windows 8, the message says that it is not compatible

  I have a new Toshiba Satellite L840 computer that had installed so I used Windows 8 Upgrade Pro but he tells me that ATI Catalyst Control Center is not compatible Windows 7.  I had the option of UNINSTALLING ATI Catalyst Control Center, which I did but it tells me it has to be reinstalled and to go to my Center of Toshiba computer to download a compatible, but I found on the Web from Toshiba site?  It is necessary to have ATI Catalyst Control Center to run Windows 8?

  Hello

  Your machine will work fine with the Catalyst.

  You will not have access to some of the optional features\adjustments it provides however.

  There is a new version of catalyst to win 8 available at AMD\ATI that may or may not work, depending on the model of your graphics chip. If the model is 6 * or higher, it should work.

  I have not personally tried yet.

• Satellite L840/020 - need to re - install ATI Catalyst Control Center win 8

  I get a message from the program compatibility Wizard the I need to reinstall ATI Catalyst Control Center.

  I went to their website and it said computers laptop Toshiba would need to get this information from Toshiba.
  I can't find this download.

  My graphics card is the Radeon of AMD 7670 M
  Satellite L840/020
  Reference No.. PSK8LA-020007
  Windows 8 Pro 64 bit

  It of Australian model for Toshiba laptop.
  Therefore, you should find these drivers on the support page for the Toshiba driver to THE:
  http://www.MyToshiba.com.au/support/download

• dv7t-6c00Quad installed Win8Pro (final version) & ATI Catalyst Control Center fails

  My laptop is the dv7t-6 c 00 Quad and I just installed the version of Windows8 Pro (I am a member of MSDN Developer).

  Everything went fine EXCEPT the ATI Catalyst Control Center does NOT work.  I tried to reinstall the graphics driver (sp55098.exe), but it won't work because it does not "meet the minimum requirements" (which I assume means that it has not been updated to handle Windows8.

  The result is that my system has become unstable. I guess that's because the control center would deal with switching between low power and high power/performance chipsets.  I noticed that this change can occur on the fly and seems to have with a web browser (Internet Explorer).

  It's REALLY BAD, because it crashes my system.

  Please respond and tell me that there is a SOLUTION NOW!

  * Notes: I tried to launch Catalyst Control Center and get this message, "Catalyst Control Center cannot be started.  There are currently no parameters that can be configured using Catalyst Control Center".  AAARGH!

  Tom

  It's the definitive answer to AMD.  HP must deliver the updated for my portable operarting under Windows8 Catalyst drivers.  I hope it will be soon.  In fact, I'd be happy to beta test.

  Here is the answer from AMD:

  Dear Thomas,

  Your service request: SR #{ticketno: [8200508926]} has been reviewed and updated.

  History of application of Service and response:

  As AMD only provides the reference for laptops drivers (provided as-is with limited support), sometimes our software is not compatible because changes made to the graphics card from the laptop manufacturer to improve stability and performance in the laptop. The error you receive indicates that the Radeon card in your laptop is incompatible with our drivers, since the manufacturer of your laptop has changed the Radeon card enough such that our drivers will work with your product. As such, you will need to contact HP for pilots and support to download and install. We will have all the drivers for your system that will be compatible, you will be forced to go with HP. We apologize for any inconvenience this might cause.

• Reinstall required for ATI Catalyst Control Center after the upgrade to Windows 8

  Updated my HP Pavilion dv7 - 70232cl to Windows 8.  I don't have any problems during the upgrade.  Now I'm asked to reinstall ATI Catalyst Control Center.  The message says that my version of ATI Catalyst Control Center is not compatible with this version of Windows.  Y at - it a patch for this problem that I can download?   Thanks, jk-3003

  And the AMD Catalyst Control Center depends on .NET 3.5 installed first, otherwise it will not install.

  Launch Control Panel, select programs, click programs and features, and then click on "Turn Windows features on or off".

  Check the first box - .NET Framework 3.5 (included .NET 2.0 and 3.0)

  Make sure you are connected to the internet, because you may have to download files from Ms.

  Once this is done install your driver AMD should be fine

• Re: Satellite A300-1LT - impossible to install the ATI catalyst control center

  I can't install sound pretty boring - ATI catalyst control center. To be honest, everything works fine without it, but in a few days, I'll get HDTV, so I thought why not install now to check the options in it. I installed the latest versions of ATI drivers, choose the right system (vista 32 bit), but for some strange reason, I do not see anywhere, not in the start Panel, not in c-program files-ati tehnologices where its supposed to be installed.

  As I sad, I have no problem with my grapfic card, I just wanted to be able to play with the scope setting resolutions when my TV is used.

  I have the ati 3470 graphic card.

  Hi Hrvoje

  If I understand you right, you use now non - Toshiba ATI display driver. Am I right about that?
  I mean I don't think that Toshiba offers several versions of ATI drivers for your model laptop.

  Where you Born these drivers? On the Toshiba download page?

• ATI Catalyst Control Center for windows 8 pro updates

  I need the ATI Catalyst Control Center updates for my 8 Professional window.

  I have the Sony laptop

  Hello Kenvnus,

  Welcome to the community forums of Sony.

  What model Laoptop do you have?

  If you are not sure, read this guide to find out where to find the model #.

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264#notebook