Uninstalling vista SP1 offline

Similar Questions

• Lenovo T61 - 7663-AY2 uninstall Vista SP1 to SP2 and now cannot restart

  Hello community,

  I did something wrong with my Lenovo computer.

  I tried to upgrade vista SP1 to SP2 in order to continue to receive updates from windows, but I failed to improve.

  I read on a forum that to go if you have some difficulties to move from SP1 to SP2, the best thing to do is to uninstall SP1, in order to re-install again and after the update to SP2 is easy.

  So I uninstalled Vista SP1: KB936330 from my laptop and now it cannot restart. I'm facing the famous! 0xc01a001d! registry error.

  I tried all content restoration factory (MS DOS, restoring from the last restore point), but it cannot restart.

  Is there a usual thing do in this case, before the start in the order, he returned with the factory setting?

  My warranty expired on September 21, 2010, and I bought my computer in France while I am in England now.

  Thanks a lot for your help.

  Mitch

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67853

  Here is the driver matrix which relates to your T61

• Windows Vista SP1 uninstall SP2 and viseversa

  My laptop will not automatically updated Vista SP1 or SP2.  It still fails.  I decided to download the standalone update from another computer, and then download and install on my laptop.  The problem I encounter is when one is installed it is uninstalled and the automatic updates icon opens with an important update that ends up being Vista SP1 or SP2, whatever one is in front of the update installed.  Can someone help me understand how to solve this problem?

  Canela,

  See the MVPRobear Dyer response to a previous post this month involving problems with Windows XP without the Service Pack.

  His advice, I think, you can keep it as a reference with Vista

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/bfea4cae-bce7-4E0B-a34d-56a553c428f2>

  Anyway, if I am wrong, I hope someone will correct me.

• Cannot install Window Vista SP1 error 800f081f.

  OT:800F081F
  My computer is using Window Vista Home Premium 64-bit operating system.
  I am trying to install Windows Vista SP1 with windows updare, but it will always fail with the error code 800f081f. also tried installing sp1 complete and update tool for Windows Vista system but all fail with the same error code please help.

  Here is my log of windows update. (below)

  2012-05-20 08:46:27:708 988 a58 to THE # approved updates = 1
  2012-05-20 08:46:27:727 988 a58 initiated at THE download, updateId = {12050967-CBA3-43AF-B9C4-D3AB39C4BD6F}.107, callId = {FDD2AAF3-C52A-4D03-87C4-FBB1A0D4EE17}
  2012-05-20 08:46:27:728 988 a58 showing THE currently customer progress UX - so not to launch any other client
  2012-05-20 08:46:27:728 988 f70 DnldMgr *.
  2012-05-20 08:46:27:728 988 f70 DnldMgr * START * DnldMgr: downloading updates [CallerId = AutomaticUpdatesWuApp]
  2012-05-20 08:46:27:728 988 f70 DnldMgr *.
  2012-05-20 08:46:27:728 988 f70 DnldMgr * Call ID = {FDD2AAF3-C52A-4D03-87C4-FBB1A0D4EE17}
  2012-05-20 08:46:27:728 988 f70 DnldMgr * priority = 3, Interactive = 1, owner is system = 0, proxy explicit = 0, Proxy = 1 session id, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
  2012-05-20 08:46:27:728 988 f70 DnldMgr * updates to download = 1
  2012-05-20 08:46:27:728 988 f70 Agent * title = Windows Vista Service Pack 1 for x 64 (Kb936330)
  2012-05-20 08:46:27:728 988 f70 Agent * UpdateId = {12050967-CBA3-43AF-B9C4-D3AB39C4BD6F}.107
  2012-05-20 08:46:27:728 988 f70 Agent * updates the 2 beams:
  2012-05-20 08:46:27:728 988 f70 Agent * {02FEFF61-3823-4850-8A74-E1FAF4806A8B}.107
  2012-05-20 08:46:27:728 988 f70 Agent * {D63B5583-12FF-4F8F-AED8-125800DC076D}.107
  2012-05-20 08:46:27:742 988 f70 DnldMgr * DnldMgr: downloading new job [UpdateId = {02FEFF61-3823-4850-8A74-E1FAF4806A8B}.107] *.
  2012-05-20 08:46:27:742 988 a58 to THE # pending download calls = 1
  2012-05-20 08:46:27:742 988 a58 to THE<## submitted="" ##="" au:="" download="">
  2012-05-20 08:46:27:744 988 f08 to THE layout featured update notifications.  fIncludeDismissed = true
  2012-05-20 08:46:27:744 988 f08 to THE star no. updates available.
  2012-05-20 08:46:27:797 988 f70 DnldMgr * all update files have already been downloaded and are valid.
  2012-05-20 08:46:27:797 988 f70 DnldMgr * DnldMgr: downloading new job [UpdateId = {D63B5583-12FF-4F8F-AED8-125800DC076D}.107] *.
  2012-05-20 08:46:27:798 988 f70 DnldMgr * update queue for the generation of application for the Download Manager.
  2012-05-20 08:46:27:798 988 f70 generation DnldMgr download application update {D63B5583-12FF-4F8F-AED8-125800DC076D}.107
  2012-05-20 08:46:28:285 988 Manager f70 generating application for CBS update D63B5583-12FF-4F8F-AED8-125800DC076D in C:\Windows\SoftwareDistribution\Download\cd0c9038981bfabdf2661a7797444b25 sandbox
  2012-05-20 08:46:28:286 988 Manager f70 selected load type useful is ptExpress
  2012-05-20 08:46:28:537 988 Manager f70 UH: DpxRestoreJob returned 0 x 80070002
  2012-05-20 08:46:28:537 988 f70 Manager detected the download status is dsHavePackage
  2012-05-20 08:52:55:558 988 Manager e64 FATAL: CBS called error with 0x800f081f,.
  2012-05-20 08:52:55:559 988 Manager f70 FATAL: UH: 0x800f081f: Stadium Async failed in CUHCbsHandler::StageCbsPackage
  2012-05-20 08:52:55:881 988 FATAL Manager f70: ask the generation for CBS full update with hr = 0x800f081f, and pfResetSandbox = 0
  2012-05-20 08:52:55:881 988 FATAL Manager f70: source of error is 106.
  2012-05-20 08:52:55:881 988 f70 FATAL DnldMgr: DM:CAgentDownloadManager:GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x800f081f.
  2012-05-20 08:52:55:881 988 f70 than dnldmgr 0x800f081f error occurred downloading update; notification of dependent calls.
  2012-05-20 08:53:05:314 988 f70 Agent *.
  2012-05-20 08:53:05:314 988 3 d 8 AU > # RETURN # to THE: download the update [UpdateId = {12050967-CBA3-43AF-B9C4-D3AB39C4BD6F}]
  2012-05-20 08:53:05:314 988 f70 Agent * END * Agent: downloading updates [CallerId = AutomaticUpdatesWuApp]
  2012-05-20 08:53:05:314 988 3 d 8 to # WARNING: download failed, error = 0x800F081F
  2012-05-20 08:53:05:314 988 f70 Agent *.
  2012-05-20 08:53:05:314 988 f70 report REPORT EVENT: 2012-05-20 + 0100 1 161 106 08:52:56:084 {55FC37B1-74A6-4BFE-8EC0-C379B4BEEE16} {12050967-CBA3-43AF-B9C4-D3AB39C4BD6F} 800f081f 107 AutomaticUpdatesWuApp content failure download error: download failed.
  2012-05-20 08:53:05:314 988 3 d 8 to THE #.
  2012-05-20 08:53:05:314 988 3 d 8 to # END # in THE: download updates
  2012-05-20 08:53:05:314 988 3 d 8 to THE #.
  2012-05-20 08:53:05:315 988 3 d 8 AU currently showing progress UX customer - so not to launch any other client
  2012-05-20 08:53:05:323 988 f70 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2012-05-20 08:53:05:323 988 f70 WER sent report: 7.4.7600.226 0x800f081f 12050967-CBA3-43AF-B9C4-D3AB39C4BD6F 106 download not managed
  2012-05-20 08:53:05:323 988 f70 report CWERReporter finish event management. (00000000)
  2012-05-20 08:53:05:367 988 e64 putting featured update notifications.  fIncludeDismissed = true
  2012-05-20 08:53:05:367 to heading No. 988 e64 updates available.
  2012-05-20 08:53:06:130 988 e64 to THE BeginInteractiveInstall invoked to install
  2012-05-20 08:53:06:131 988 e64 approved Auto 0 updates to install it (for Ux), installType = 0
  2012-05-20 08:53:06:131 988 e64 to THE WARNING: BeginInteractiveInstall failed, error = 0x8024000C
  2012-05-20 08:53:06:131 3196 948 CltUI FATALE: BeginInteractiveInstall to install returned the 8024000 C code
  2012-05-20 08:53:06:179 3196 948 CltUI WARNING: directive to progress Interactive fate due to the error 8024000 C
  2012-05-20 08:53:06:196 988 ee0 event handle to THE receipt
  2012-05-20 08:53:06:196 988 ee0 to THE star no. updates notifications to show
  EE0 08:53:06:196 988 2012-05-20 to THE UpdateDownloadProperties: 0 downloads are still ongoing.
  2012-05-20 08:53:06:198 988 ee0 to (non-interactive) Offline detection triggering
  2012-05-20 08:53:06:198 988 ee0 setting of to THE pending client directive to ' install complete Ux ".
  2012-05-20 08:53:06:198 988 ee0 to THE WARNING: in the meantime the directive, 'Complete Ux install', is not applicable
  2012-05-20 08:53:06:198 988 ee0 setting of to THE pending client directive to 'download approval '.
  2012-05-20 08:53:06:204 988 ee0 to THE #.
  2012-05-20 08:53:06:204 988 ee0 to THE # START # to THE: research updates
  2012-05-20 08:53:06:205 988 ee0 to THE #.
  2012-05-20 08:53:06:208 988 ee0 to THE<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2012-05-20 08:53:06:208 988 f70 Agent *.
  2012-05-20 08:53:06:208 988 f70 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2012-05-20 08:53:06:208 988 f70 Agent *.
  2012-05-20 08:53:06:208 988 f70 Agent * Online = No; Ignore download priority = No
  2012-05-20 08:53:06:208 988 f70 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2012-05-20 08:53:06:208 988 f70 Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
  2012-05-20 08:53:06:208 988 f70 Agent * Search Scope = {Machine}
  2012-05-20 08:53:06:386 988 e64 putting featured update notifications.  fIncludeDismissed = true
  2012-05-20 08:53:06:386 to heading No. 988 e64 updates available.
  2012-05-20 08:53:06:399 988 e64 to THE WARNING: return because of the GetDownloadProgressUx error, error = 0x8024000C
  2012-05-20 08:53:06:399 988 e64 to THE WARNING: GetInteractiveInstallProgress failed, error = 0x8024000C
  2012-05-20 08:53:06:399 2040 b58 WUApp WARNING: call to GetInteractiveInstallProgress failed, hr = 8024000 C
  2012-05-20 08:53:15:229 988 f70 Agent * updated added {12050967-CBA3-43AF-B9C4-D3AB39C4BD6F}.107 search result
  2012-05-20 08:53:15:229 988 f70 Agent * found 1 updates day and 17 categories of research; entities has been evaluated Appl. rules of 351 on 828
  2012-05-20 08:53:15:369 988 f70 Agent *.
  2012-05-20 08:53:15:369 988 f70 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2012-05-20 08:53:15:369 988 f70 Agent *.
  2012-05-20 08:53:15:376 988 3 d 8 AU > # RETURN # to THE: research updates [CallId = {E445B3D7-7528-4031-AF70-E2020256AADD}]
  2012-05-20 08:53:15:376 988 3 d 8 AU # 1 detected updates
  2012-05-20 08:53:15:376 988 3 d 8 to THE #.
  2012-05-20 08:53:15:376 988 3 d 8 to # END # in THE: research updates [CallId = {E445B3D7-7528-4031-AF70-E2020256AADD}]
  2012-05-20 08:53:15:376 988 3 d 8 to THE #.
  2012-05-20 08:53:15:376 988 3 d 8 to notifications of updates to show featured stand
  2012-05-20 08:53:15:392 988 af0 putting featured update notifications.  fIncludeDismissed = true
  2012-05-20 08:53:15:392 988 af0 No. feature updates available.
  2012-05-20 08:53:21:203 988 launched ee0 again to THE client for directive 'Download approval', session id = 0x1
  2012-05-20 08:53:21:224 4092 6 fc Misc = logging initialized (build: 7.4.7600.226, tz: + 0100) =.
  2012-05-20 08:53:21:224-4092-6 fc Misc = process: C:\Windows\system32\wuauclt.exe
  2012-05-20 08:53:21:222 4092 CF 6 process interface user of launch customer for AUClnt
  2012-05-20 08:53:21:250 4092 6 fc Misc = logging initialized (build: 7.4.7600.226, tz: + 0100) =.
  2012-05-20 08:53:21:250-4092-6 fc Misc = process: C:\Windows\system32\wuauclt.exe
  2012-05-20 08:53:21:250-4092-6 fc Misc = Module: C:\Windows\system32\wucltux.dll
  2012-05-20 08:53:21:250-4092-6 fc CltUI to THE client got new directive = 'download approval', serviceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, return = 0
  2012-05-20 09:08:41:723 988 f08 to THE layout featured update notifications.  fIncludeDismissed = true
  2012-05-20 09:08:41:723 988 f08 to THE star no. updates available.
  2012-05-20 09:27:36:760 3368 ae4 Misc = logging initialized (build: 7.4.7600.226, tz: + 0100) =.
  2012-05-20 09:27:36:760 3368 ae4 Misc = process: C:\Windows\SysWOW64\DllHost.exe
  2012-05-20 09:27:36:760 3368 ae4 Misc = Module: C:\Windows\SysWOW64\wuapi.dll
  2012-05-20 09:27:36:758 3368 ae4 COMAPI-
  2012-05-20 09:27:36:760 3368 ae4 COMAPI - START - COMAPI: search [ClientId = ]
  2012-05-20 09:27:36:760 3368 ae4 COMAPI-
  2012-05-20 09:27:36:796 988 344 Agent *.
  2012-05-20 09:27:36:796 988 344 Agent * START * Agent: finding updates [CallerId =] of
  [2012-05-20 09:27:36:796 3368 ae4 COMAPI <-- submitted="" --="" comapi:="" search="" [clientid=""> ]
  2012-05-20 09:27:36:796 988 344 Agent *.
  2012-05-20 09:27:36:796 988 344 Agent * Online = Yes; Ignore download priority = No
  2012-05-20 09:27:36:796 988 344 Agent * criteria = "(IsInstalled = 0 and IsHidden = 0).
  2012-05-20 09:27:36:796 988 344 Agent * ServiceID = {00000000-0000-0000-0000-000000000000} third party service
  2012-05-20 09:27:36:796 988 344 Agent * scope of search = {Machine}
  2012-05-20 09:27:43:461 988 344 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-05-20 09:27:43:469 988 344 Misc Microsoft signed: Yes
  2012-05-20 09:27:46:269 988 344 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-05-20 09:27:46:273 988 344 Misc Microsoft signed: Yes
  2012-05-20 09:27:46:290 988 344 PT +++ PT: Synchronizing server updates +++
  2012-05-20 09:27:46:290 988 344 PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-05-20 09:28:02:402 988 344 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-05-20 09:28:02:404 988 344 Misc Microsoft signed: Yes
  2012-05-20 09:28:02:544 988 344 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-05-20 09:28:02:548 988 344 Misc Microsoft signed: Yes
  2012-05-20 09:28:02:577 988 344 PT +++ PT: synchronizing extended update info +++
  2012-05-20 09:28:02:577 988 344 PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-05-20 09:28:15:154 988 344 Agent * updated added {12050967-CBA3-43AF-B9C4-D3AB39C4BD6F}.107 search result
  2012-05-20 09:28:15:155 988 344 Agent * found 1 updates day and 17 categories of research; entities has been evaluated Appl. rules of 488 on 828
  2012-05-20 09:28:15:231 988 344 Agent *.
  2012-05-20 09:28:15:231 988 344 Agent * END * Agent: finding updates [CallerId =] of
  2012-05-20 09:28:15:231 988 344 Agent *.
  2012-05-20 09:28:15:277 3368 704 COMAPI > COMAPI - RECOVERY -: search [ClientId = ]
  2012-05-20 09:28:15:288 3368 704 COMAPI - updates found = 1
  2012-05-20 09:28:15:288 3368 704 COMAPI-
  2012-05-20 09:28:15:289 3368 704 COMAPI - END--COMAPI: search [ClientId = ]
  2012-05-20 09:28:15:289 3368 704 COMAPI-
  2012-05-20 09:28:20:231 988 344 report REPORT EVENT: 2012-05-20 09:28:15:230 + 0100 1 147 101 {38BF3250-37EA-4BE3-A47B-61D445D091E0} {00000000-0000-0000-0000-000000000000} 0 0 success software sync Windows Update Client detected 1 updates successfully.
  2012-05-20 09:28:20:231 988 344 CWERReporter finish event management report. (00000000)
  2012-05-20 09:47:08:380 988 d34 to THE layout featured update notifications.  fIncludeDismissed = true
  2012-05-20 09:47:08:380 988 d34 to THE star no. updates available.

  Hello

  You install service pack of Windows vista Windows updates or download and install?

  Method 1
  I suggest to perform cleanup starts, then download and install the update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Windows Vista Service Pack 1 five language standalone (KB936330)
  Download link: http://www.microsoft.com/en-us/download/details.aspx?id=30

  Method 2
  I suggest you try the remaining steps in the following link:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366
  Note: make sure that you enable security applications, troubleshooting is completed.

  Method 3
  I suggest you to reset the Windows update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• Satellite P100 - no sound after installing Vista SP1

  The machine is a Satellite P100 just more than a year, came with Vista installed. No problem until today when Vista SP1 has been automatically downloaded and installed. Now I have no sound from speakers or headphones.

  I've uninstalled and reinstalled the driver Conexant Audio Hi-Def to the latest recommended on the Toshiba site.

  I tried to restore to before the time when SP1 was installed.
  I updated the BIOS to the last on the Toshiba site.

  I pulled my hair.

  Someone at - it any other suggestions?

  It s certainly a useful information. Thanks again!

• Problem with the Conexant HDAudio after installing x 86 Vista SP1

  I didn't want to start a new thread, but it seems that my problem is quite unique.
  
  When the first x 86 Vista install my speakers/headphones worked great. After Vista SP1 installed, my speakers/headphones went silent, but the pilot was still there and working properly. I uninstalled the driver and let Windows automatically install a different driver. (No Rollback was available) I could get the sound from my speakers. Speakers are the only thing that works if I plug into the headphone jack or not.

  When connected to the plug headphones I have test the headphones feature in playback devices and receive nothing in the helmet.
  
  Drivers of HP support only cut my speakers while doing my reading helmet camera disappear. Even with the updated driver.
  
  I like to use it as a TV computer and would like the sound of the TV via the headphone jack.
  
  I searched EVERYWHERE on the internet and found no resolution. Any help would be appreciated.
  
  HP pavilion dv6748us

  Conexant Audio
  
  Hardware ID:

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF & REV_1000

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF

  Have encountered problems with the card drivers its me on vista & 7 even when driver installation correct support downloaded installers.

  Only solution I found was to download a range of versions of different driver bought research google & trials, tedious but sometimes only way to get the result.

  If you uninstall the driver & restart it installs a generic driver audio Conexant or Windows!

  I also use my laptop with TV & hifi so work taken audio is a must (card input jack usb audio can be an option if)

  Also never rule out the fault of Council helmet as have a Pavilion & after that OS installed on a new drive HARD had no audio for headphones, pilot presumed linked, but after fiddling fuond twist got jack sound, turned Ribbon glued on card Board failed.

• error install Vista sp1 installation file Windows6 0x8007000D. 0-KB936330 - X 86

  Hello

  I use a vista home basic windows which was preinstalled on my computer laptop compaq presario to THE V6608 that I bought in January 2008. Recently, I got my laptop to its factory settings. After that I tried to install the full windows vista sp1 update patch (. Windows6 0-KB936330-X 86-wave0) which was about 434 MB in size. whenever I do, I get the error message "there are internal an error 0x8007000D" as directed by the support page from microsoft on that I installed the microsoft update scan tool that is also a updated and uninstalled my antivirus software and tried again. I still get the same error. Can someone help me with this?

  See...

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [Error 0 x 80070002; 0x8007000D; 0 x 80073712; 0x800b0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Your first post was unclear: I thought you were trying to install SP1 manually (after downloading the Setup program), not via Windows Update.

  When you reinstalled Windows, the free trial of Norton would have also been reinstalled (but not valid, of course). Do you have (1) uninstall the Norton free trial once again and then (2) download/run the Norton Removal Tool before you (3) reinstalled NOD32? [Yes/No]

  Remember: you can always open a free support incident. See my previous response.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows vista sp1 installation problem

  Hi, I downloaded windows vista sp1 and at the end of the installation, it fails and says pass (http://go.microsoft.com/fwlink/?LinkId=69157) that is not valid. My windows update cannot also instal or download it too. My laptop is a sony vgn-sz433N/B and I have this problem even after full recovery my pc. Please tell me what to do?

  Hi esakhani,

  Thanks for posting your question.

  Due to Windows Update, you can try running a Fixit tool from the link below:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  After you run the Fixit, in order to install Service Pack 1, you can follow the procedure:
  -Download and install the latest Windows Update Agent:
  http://support.Microsoft.com/kb/946928

  -Run the computer system preparation tool.
  http://support.Microsoft.com/kb/947821

  -Download the stand-alone package for the Service Pack 1 from the following link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  -Turn the computer in clean boot mode.
  Disabling/uninstalling security software installed on the computer, as appropriate.
  -Launch the installation of the stand-alone package of SP 1 to the clean boot.

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Reinstall the Vista SP1

  I recently deleted windows vista important configuration files with antivirus software.

  I'm sure that reinstall Vista SP1 will fix this problem, a similar problem was actually caused by SP1 during its beta testing phase.

  My PC is a HP laptop with a recovery disk, so I can't fix the reader without restoring the State of the plant and the deletion of all personal information.

  SP1 came pre-installed on my PC, so I don't know how to uninstall it.

  I downloaded the Vista SP1 and tried to install it, but it tells me "SP1 is already installed.

  I also tried to install Vista SP2 beta, but installation did not complete.

  How do I uninstall SP1 on my PC so I can reinstall it manually?

  First of all, I need to know, what is the problem that you have after you have removed the configuration with the antivirus files?  If you know the name of the file it would be useful also.  Please follow these steps to make sure that SP1 is still intact on your system

  http://support.Microsoft.com/kb/959064

  How can you know if SP1 Is installed?

  1.	Click, and then right click on computer.
  2.	Click on Properties . Service Pack 1 appears in the Windows edition section.

  If this is the case, use these steps to try to uninstall SP1:

  How can I remove SP1?

  1.	Click on, and then type programs and features .
  2.	Click on programs and features.
  3.	In the pane tasks , click view installed updates .
  4.	Click to select Service Pack for Microsoft Windows (KB936330).
  5.	Click the Uninstall button.
  6.	Follow the on-screen instructions to uninstall SP1. After the uninstallation is complete cleaning, other activities are performed in the background for the next hour. Do not try to reinstall SP1 until additional cleanup activities have finished.

• Vista SP1 upgrade to XP Pro SP3 or SP2 Business?

  I have a Dell T3400 workstation comes with a Vista Business OEM COA product key, however, this PC has worked with XP Pro SP3 using detail settled. It is time to migrate to Windows 7, however, there is no direct way to "upgrade" from XP to Windows 7, except a clean install.

  My plan is initially upgrade Vista Business OS and then upgrade to Windows 7 Pro. This should be doable by the version upgrade paths available for each operating system. Of this plan, I did a 'test' upgrade to Vista SP1, and it seems to have worked OK (after application for new drivers various and other software upgrades).

  Windows activated and ran OK with this process, but subsequently he reported several pieces of software not compatible with Vista - no surprise. However, I could uninstall is no longer that slot software Vista as it seems to have too writes the necessary special uninstall files. I've returned to XP from a ghost image and will have a second run at it with some XP more pre working on ready for the upgrade.

  My main question: should I remove the patch SP3 of XP to upgrade it to SP2 before applying the Vista SP1? Any other consideration? I read in some other forums of Vista upgrades becomes flaky or non-fonctionnel because they were created before the release of XP SP3 and don't seem too well to manage the later version.

  Thanks in advance for any thoughts.

  I think it will be a case of trial and error. Since you have Ghost to restore XP you can uninstall all apps that play well with Vista and do the upgrade to Vista.  Just make sure that the device drivers for Windows 7 are.

  How to perform an upgrade in Place of Windows XP to Windows 7
  http://www.PAGESTART.com/xpwin7inplaceupgrade01.html

  J W Stuart: http://www.pagestart.com

• I had problems to install Vista SP1 on different computers 2 Scared of Vista SP1.

  I had problems installing Vista SP1 on 2 different computers and have had to reinstall OS and at the same time, after the reinstallation of Vista, Windows update has updated all the updates up to SP1 and I'm afraid to click on it.  I just finished rebuilding my laptop and all important updates and stopped at SP1.  I ran the System Readiness tool update on my desktop and am really GUN-SHY click on SP1.  Is there something else I can look for or take into account before clicking GO?  I was really upset when the laptop was working fine without it and against my instinct clicked on install when Windows update finally offered it.  I was surprised, that he had not come forward.  I have HP Pavilion, AVG and it is on both machines.   On the desktop I had updated SP1 when it first came out, and something zapped my video card and had to install a video card to see what was going on.  Finally I had to buy another HP motherboard.  It was not cheap.  I'm really scared to click on install. And I would like to put into practice what I preach to end-users, but experience twice shot dark me and path of restoration.  Thank you.

  I'm back - I'M MY technician.  I support experience dating back to the beginning of the 1990s.  I tried your advice and humiliated.  What I have to lose - I said. If this does not work, I'll reformat and start over.   here goes.

  I reformatted, reinstalled OEM in new condition.  Bypassed the Code Purple HP tattoos on their generation, where we replaced the MB that I had.
  Uninstalled Norton, installed the Norton remover.
  Installed MS Security essentials.   Yet once, I said why not.  try it.
  Installed all the updates that Microsoft had to offer.   Have to him. I said.
  It took almost two days.
  System has all updates included SP1 and SP and anything withdrew automatic update of Ms.
  Ok.
  browser, flash, drivers, software for personal use
  System is being run-
  Scanned primary and any secondary t.o.d. after reconnecting them - disconnected for the reformat.

  There are other questions which seem to me with ISP but I meet with them, or open a new question.  For now, Vista SP1 and 2 are in.

  Oh and if anyone has a HP, which gets a code purple error after entering the process of restoration - Shift and F10 while the purple error code is on the screen and rename files from HP in the form of command prompt to convey this purple code and continue with the installation.  I had to find this info on the site of HP after the first reformat.

  and another thing.  I had to take my firewall router a notch to allow download of the Norton removal tool.  Why they still use FTP for one simple download is beyond me.  -

  Nice day

• Update Vista SP1 fails with 8000FFFF

  I installed windows vista sp1 and sp2 in around March 2011, I decided to uninstall because I couldn't have a 3rd themes on my PC. Now I have a Windows 7 CD, I tried to upgrade my vista but it said I had to install Service Pack 1 to be able to do. I went to windows update and download and install service pack 1, when he had finished he said he had not and gave me the 8000FFFF error code. Also I tried to download service pack 1 from the Microsoft Download Center and install it manually, but always after a reboot I 0x8000FFFF. I've been looking for a solution to this problem since June, but still no luck tried in safe mode, with downloader manually from the microsoft Web site, what I found does not work.

  Hello

  Were there any changes or updates made on the computer before the show?

  I suggest you to return the item and check if it helps:

  0x80000FFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Re: Equium P200 close issue with Vista SP1

  My Equium P200 seems to have developed a problem when stopping down.

  If I select 'Shut Down' option in the Shut Down menu then all revenues, but while the laptop restarts itself and there will be a 'blue screen of death' teling me he does a memory dump physical.

  When it is complete Notepad starts and there is a message saying that Windows (Vista SP1) has recovered from a serious problem.

  Any ideas on how to fix?

  Thank you

  AFAIK SP1 could create serious problems because of the problems of compatibility between some drivers and tools.

  Have you noticed the same issue without SP1 installed?

  I think you should check this!

• Satellite x 200 SLi: I lost sound after Vista SP1 installation

  Hello
  I have a Toshiba Satellite x 200 SLi

  After I installed the SP1 of Vista, I just lost sound and even update the audio drivers... I still have several problems such as: sometimes the sound stops, errors, try to display movies... etc...

  Vista tells me that I have Norman for update my drivers but I already have the last avaiable driver on TOSHIBA page.

  Anyone with the same problem?
  No idea how to solve this problem?

  Thank you

  The problem is that Microsoft's Vista SP1 makes trouble. The problem is that not all drivers are compatible and fully supported by SP1.

  I think you have a Realtek audio chip. Perhaps have you check the site Web of Realtek s the latest HD audio driver

  If this doesn't help, then you will have to wait until the new update is available (or you will remove him SP1)

• Vista SP1 Russian support on Satellite P200 - 11L

  Hello!
  Does anyone have information about vista sp1 support?
  I've got portable Satellite P200D - 11 L
  Is it safe to use Vista SP1?
  I use search driver under SP1 [LINK to driver | http://ru.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?macId=&mode=userMachines&userOS= & action = search & selProduct = 760 & selOS = 26 & selType = all & country = 30 & language = 34 & search =]

  but supports Windows Vista 32 bit only.

  Thanks in advance

  As much as I know load SP1 is not started, but it should happen soon.