Unique property Record

Similar Questions

• unique several record based on the date record selection

  Hi experts,

  I have a table that contains multiple records for unique identification number now, I select the single record that contains the most recent date.

  Here is the structure

  Name of Type Null

  ------ ---- ------------

  NUMBER OF ID_P

  NAME_P VARCHAR2 (12)

  DATE_P TIMESTAMP (6)

  Reviews

  ---------------------

  1 loosi 22 August 13 01.27.48.000000000 PM

  1 hahahaha August 26, 13 01.28.10.000000000 PM

  KK 2 22 August 13 01.28.26.000000000 PM

  Emmeline 2 26 August 13 01.28.42.000000000 PM

  now I have to select below 2 lines how to write select qurie for this?

  1 loosi 26 August 13 01.27.48.000000000 PM

  Emmeline 2 26 August 13 01.28.42.000000000 PM

  Hello

  You can use the ROW_NUMBER analytic function.

  I don't have a copy of your table, so I'll use scott.emp to illustrate.  In scott.emp, there may be several lines for a single job.  To display only 1 row per job, hiredate line with the most recent:

  WITH got_r_num AS

  (

  SELECT empno, hiredate-, deptno, job or whatever columns you want

  ROW_NUMBER () taken OVER (PARTITION OF work

  ORDER BY hiredate DESC

  ) AS r_num

  FROM scott.emp

  -WHERE--if you need a filter put it here

  )

  SELECT *- or the list of all columns except r_num

  OF got_r_num

  WHERE r_num = 1

  ;

  What results do you want in the case of links?  Depending on your needs, you can add expressions of tiebreaker to the analytical ORDER BY clause or the use of RANK instead of ROW_NUMBER.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results desired from these data.
  Point where the above query is to produce erroneous results, and explain, using specific examples, how you get the right results from data provided in these places.
  If you change the query at all, post your modified version.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• Unique property MDEX error

  I am writing to the MDEX and I get this error:

  " exception encountered when running external function ' ingest-internal: update ', caused by the short-committed error an error: MDEX0001: entry invalid: an assignment of a single property has not been found on the leaflet: ns1:record xmlns:ns = ' http://www.Endeca.com/MDEX/ingest/1/0 "xmlns:ns1 =" http://www.Endeca.com/MDEX/XQuery/2009/09 "xmlns:soapenv =" http://schemas.xmlsoap.org/soap/envelope/ "" "

  What single property assignment I'm supposed to be the establishment? Thank you

  What to do when these two are true and you still get the error?  Here is my XML string:

  ID id MDEX:String lexical TRUE FALSE

  In addition, it won't let me go alone assign: cannot change the single award for the "id" property

• Set the property record updateble / no updateble dynamically

  Dear friends,
  
  When I run the query in the form of oracle data is retrieved and displayed but I want to set the record the record recoveries property (updateble / no updateble) based on a value of text element in the file.
  
  How do we establish who and in what trigger.
  
  
  Thanx
  
  Manish Manyal

  Hello

  I think it's better trigger a Times-News-Record-Instance as after query fires only once, at the time of the query.

  François

• Retrieve the unique property of Pof object

  Is it possible to easily extract a single property of an object of POF?
  For example, suppose I have a person object that has an age, a name and a bunch of other properties.
  I want to find the names of all the people who are over 18, but want all the other properties of the person.
  
  I prefer not to get the entire object, and then iterate to the breast to extract the name for each of them and throwing the rest of the object. This seems to be an unnecessary overhead.
  
  I see that you can do this by using EntryProcessors and get the PofValue with the PofValueParser, but the data entry processors lock and unlock the cache entries, this felt like an unnecessary overhead for a read-only operation.
  
  I feel like there is almost a way, but do not see it.
  
  Someone at - it ideas
  
  Thank you
  Steve

  FWIW:

  You can use the extractors to drive the "select" as well as list the ' where clause ' in point 3.6. I was curious to know how the CohQL in 3.6 a tool does do that, and one of these Oracle here people posted the answer ('see the development plan' in the tool command line with the query to execute to display the details.) So, this is the approach I followed - that is what the plan of living room exits, just translated into API calls):

  For example:

  Select instrumentId, positionType positions where the bookId = and keys (game) = "TRADING".

  The equivalent API code:

  The "list of selection...". »
  Aggregator ReducerAggregator = new ReducerAggregator (new MultiExtractor ("getInstrumentId, getPositionType"));

  The ' where clause '...
  Filter filter = QueryHelper.createFilter ("" bookId = ' "+ bookId +" ' and the keys (game) = "TRADING" "");
            
  The final query...
  Map positionsMap = cache.aggregate (card) (filter, aggregator);

  There are questions stirring POF extractors to CohQL, so I avoided the and let it default using the ReflectionExtractors normal, even if my data in a distributed format POF cache, I found not the extractors of POF loss which would be huge a deal from a performance perspective, and I don't like the much simpler syntax of the CohQL. Look at the syntax 'point' to access the embedded child objects.

  Not sure if the above, that's what you're looking for, but it works for me.

  See you soon,.

  Steve

• How to remove a keyframe of UNIQUE property? (CS4)

  I have not really used flash since flash 8 pro, and I am currently using flash CS4 for an assignment.

  The motion tweens have changed for the confusion, and I can't figure out how to delete a keyframe property tween movement without removing all THE motion tween property keyframes. can anyone help?

  is it possible to MOVE them without destroying your entire animation?

  or DELETE?

  Command-click on the image to select just that one frame. Control-click on Windows, I guess.

• unique records at random

  Hello
  I need 6 unique random records from a table of query. Each record has a reference to an image, I am ulitmately want 6 images, but each must be unique and random.
  
  Did anyone done this before? There is an available for this custom tag?
  
  Thank you
  Kiley

  After help everybody I this Chuck of code in order to provide everyone who is facing the same question I did.

  This provides a table with 6 elements of unique & random of the id of a table.

  Thanks to everyone who helped me.

  
  

  
  
  
  
  = #getAllDB_recordsAdsRet.xref_coupon_DB_records_id # >
  
  

  
  
  
  
  
  
  
  

  
  

  
  

• Remove a property of all objects in a table

  I have a relationship with a large number of custom properties added to objects in virtual machine earlier in the report.  Later in the report, I want to delete only a custom from the items property.

  Assuming that my table variable is $vms, how to remove a unique property of all objects of the virtual machine in the table?  (If possible, I prefer not to do another select statement and select only the properties that I want to keep, because it makes for a long select statement and makes the report less readable).

  Hello, TheVMinator-

  I guess that, 'do not add to start with the foreign custom property' is not a valid solution, as I assume that this custom property using one at a time.

  Another way would be to use another select statement, but without the need to explicitly list this long array of properties to select.  You can select essentially all properties _except_ "extraProperty0" with something like:

  ## for all of the output items, select all *Property types of members _except_ for the one named "extraProperty0"$arrMyOutputItems | %{    Select-Object -InputObject $_ -Property (Get-Member -InputObject $_ -MemberType *Property | ?{$_.Name -ne "extraProperty0"} | %{$_.Name})}
  

  This assumes that all of the properties that you want to 'keep' are of MemberType * property (so, NoteProperty, goods, etc.).  While this is another select statement, it avoids the part 'long list of properties to select' that you do not want.  How does do for you?

• Is Oracle and all the records in the query

  Hello
  
  I have a problem with Oracle forms of performance. In the block of my list, I want to see about 2,000,000 records. Under this block list, there is a field 3 with text-to-speech function, so I have to "ask all records. When I run my application, I get error FRM-41839. When I recive on 2,000 records everything is OK.
  
  Can I use the size of table query or the number of buffered property records?
  
  Please help me.
  
  Sorry for my bad English.

  Instead of setting "Question everything", you might try "Summaries Precompute" set to Yes

• How to force updatedisplaylist in a skin called when the custom property

  Hi people,

  I created a custom component based on a power switch.  In this custom component, I added a unique property, public, bindable - let's call him Fred.

  I also have a custom appearance based on the skin of the ignition button.  It's basically like delivered skin, just a bit different graphics thing.  I applied the skin custom component custom button.  So far so good.  However...

  When a user action, the property of Fred to change on an instance of a custom button, I need my skin customized to re - draw something.  It seems that I need function updateDisplayList of the skin to the fire.  Unfortunately, it seems that the only time where it fires when 'real' properties are changed, such as "left" or "width".  How can I get the look custom updateDisplayList when this custom property false Exchange?

  PS - the custom skin can 'read' the custom of Fred fine property.  And if I put the property of Fred and then "mouse on" personalized button instance, fires updateDisplayList... too late of course, but it fires.

  I read the docs, but he wrote much on updateDisplayList, or when it fires, or how to make fire.

  Thank you

  -David

  One way I can think is that when you change Fred in the component, you can also call skin.invalidateDisplayList () at the same time.

  Or you could have the skin listen to an event that distributes the component and trigger an invalidateDisplayList() out of that.

  Maybe a nice way is to use data binding, you've already set up.  Fred is updated in the skin by an event being sent to it.  If you could have a listener for this event, you can get the display list redesigned from there.  I don't know how to do it well.

• NEITHER USB-8452 - reach the maximum write SPI speed

  Hello

  I have a USB-8452 with the latest version of the software installed (2.1.2). The host computer is a Core i7. I am trying to achieve the maximum SPI write speed with the camera possible. I tried the basic block read/write SPI, SPI Scripting blocks and SPINNAKER streaming, but the first two have large delays between CS falling and the data being written (with so that delays in loop), and the last seems to be useful only for read operations.

  Can someone tell me if there is a way of a) reduce the time of installation for basic SPI / SPI Scripting or b) writing different values in a single stream of SPI? Thanks in advance for any help on this issue, even if it's just confirmation that yes they is hard limits that cannot be overcome with the LabVIEW 8452 interface at this time.

  Here's the best I can do right now, as shown in my logic analyzer. Change of the SPI clock speed does not affect installation time and delays that are primary and secondary bottlenecks:

  SPI read/write database-

  Program: Basic Configuration followed by read/write of SPI block itself in a while loop

  Main bottleneck: ~ 450 delay us into iterations of the loop (see Figure 2)

  Secondary bottleneck: ~ 6 us delay between falling edge of CS and the first synchronization signal (see Figure 1)

  Capture 1 - delay highlighting between CS falling and first SCLK pulse

  

  2 delay highlighting between all iterations of the loop of capture

  

   

   

  Scripts of SPI-

  
  Program: Followed two Script blocks Basic Configuration run in a while loop (to check the two block to block and delay loop iteration)

  
  

  Main bottleneck: ~ 450 delay us into iterations of the loop (see Figure 3, space between the second and third images captured)

  Secondary bottleneck: ~ 250 us delay between blocks of Script run consecutive (see Figure 3, space between the first and second captured images)
  

  Capture 3 - highlighting delays consecutive run the Script and delays between while the loop iteration
  

  
  

  SPI in Streaming- It's the closest to achieve a fast writing speed, but unfortunately, it seems to be only useful for read operations (e.g., ADC), do not write.

  Program: Configuration of the base stream followed by start of the flow block

  Main bottleneck: impossible to write something else than the data value unique property "wave 1-> MOSI data." I can write a byte array to this property, but it will simply put all these bytes in an image and repeat this framework (see Figure 4) rather than go through each value.
  

   

  4 - two bytes sent repeatedly using SPI capture stream. Delay of CS is finally good, but no possibility to change the MOSI image to image data.
  

  

  Hi JBender1,

  This show looks like what we would expect for a 8452.

  If you need higher performance, I encourage you to watch using a card R or FlexRIO FPGA series for your implementation.

• How to get taken time stated in the IO in the sequence editor?

  Hi all

  Is it possible to get the indicated default time NI Semiconductor Test Operator Interface OR in the sequence editor?

  

  Are there any expression in sequence editor that can get this time taken in the operator Interface?

  How can I include this time taken in the STDF generated by the transformation in the result sequence editor?

  Thank you

  Socket's operating time is stored in the TestResultsPropertyObject. To access this object is via the MainSequenceResult parameter in the Plugin model - USE fact entrypoint. The TS. TotalTime property records the total amount of time that required to run your test code MainSequence recall. It comes to the value included in the default reports.

  The OI shows the average decision-making time of execution of the whole lot, gets it from the Manager of semiconductor modules.

  I hope this helps.

• Unable to connect to a network printer, error 0x0000000e

  I have 10 NEW computers, dell 6 and 4 Lenovo, all currently running Windows 7 Pro SP1. None of them can connect to printers network that are put in place and a lot of work for everyone in the building. I have all the drivers loaded on the print server (also Windows 7 Pro SP1) and network printers have all the correct permissions and sharing settings.  MS difficulty it will not fix anything because there is NO PRINTER INSTALLED! When I try to connect to the printer's takes 20 min to tell me that 'impossible to connect to the printer' with the error "0x0000000e". I tried to go to the IP address and the settings of the printer are there and accessible, but it will not connect to the printer. My print spooler is running...  I took the property records C:\Windows\system32\spool and all folders/files inside. Also, I copied the mscms.dll file in the C:\Windows\System32\spool\drivers\x64\3 directory.  These computers are NEW! Printers are a mixture of HP, Epson, and Kyocera printers, the problem is with the 10 new computers not my network or printers. I have 140 (55 of their Windows 7 Pro SP1) computers that do not have this problem. I have the drivers FRO my printers... But these are NETWORK printers... If I install the drivers for these printers, the new client tries to become the print server and then causes WORLD EVERYTHING to lose the ability to connect to this printer.

  Why is there no solution to this problem? I tried ALL of the solutions you have on this issue and none of them works.  Windows 7 Pro seems to be incomplete or defective. If there is not a solution to this problem, so I need to know where at Microsoft to send the Bill for my time to solve YOUR problem. This problem is costing me time and money! My company should not pay to solve your problems with your software!

  * Dell and Lenovo tech support both told me that it is a matter of MICROSOFT and advised me to contact Microsoft. When I did, the first tech told me that he had no idea how to fix this and gave me a higher number of support on the tech of lever. The second Microsoft technology wanted to pay me $400 able to talk to me on this subject...

  Hello Kevin,

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• View object has more than 2000 lines but with only 500

  Hi all

  I have a view object that has more than 2000 lines. But when I try to see the front end of data, it does is display only 500 records.

  Then when I did some research I discovered that there is a profile option where I need to increase the size.

  before the value in the profile Option (FND: display object Max size Fetch) amounted to 500

  Thus valued at 3000.

  But I wanted to know what will be the impact of the evolution of this profile option on Database/Application.

  
  

  Please advice which would be the best way to manage several size maximum extraction on the objects in view.

  Thank you.

  Not really sure what you mean by 'calculations are performed properly"If you are not able to see in the front.

  If you don't even have an option "next/previous" on the table to go to the next round?

  You can paste a screenshot?

  You can try to increase the property records of the region of the table and see what happens?

  Where did you add vo.setMaxFetchSize(-1)?

  Can you try replacing exwcuteQuery() and add the following inside that?

  See you soon

  AJ

• Integration of the ATG-short 11.1 - error with base

  Hi all

  I had EAC app deploy to 11.1 short with ATG. It isn't CRS app, it is a custom.

  I am able to run initialize_services, but when I try to run baseline_index.bat or ProductCatalogSimpleIndexingAdmin (by dynamo), I get this strange exception:

  BASS: Caught an exception during method call "run" on the object 'BaselineUpdate '. Release locks.

  java.lang.reflect.InvocationTargetException

  ...
  

  Caused by: com.endeca.soleng.eac.toolkit.exception.CasCommunicationException: error starting analysis of reference "MyApp-last-mile-crawl.

  ...

  Caused by: Crawl could start: error: not found attributes.  Please make sure that the contents of configuration is loaded into the repository config.

  ...

  Error: record spec is not a defined property: record.id

  Here's my index file - config.json.

  'indexConfig': {}

  'system': {}

  "attributes": {}

  "jcr:primaryType': ' short: unstructured."

  'record.id': {}

  "propertyDataType": "ALPHA."

  "jcr:primaryType": "endeca:property",

  'isRecordFilterable': true

  },

  'product.repositoryId': {}

  "propertyDataType": "ALPHA."

  "mergeAction": "UPDATE."

  'isRollupKey': true,

  "jcr:primaryType": "endeca:property",

  'isRecordFilterable': true

  },

  'dim.product.price_range': {}

  "jcr:primaryType": "endeca:dimension",

  'rangeComparisonType': 'FLOAT,'

  "multiSelectType": "GOLD."

  'sourcePropertyNames': ["sku.activePrice"]

  },

  'dim.product.brand': {}

  "jcr:primaryType": "endeca:dimension",

  "mergeAction": "UPDATE."

  'multiSelectType': 'GOLD '.

  }

  },

  'precedenceRules': {}

  },

  'searchIndexConfig': {}

  'isWildcardEnabledInDimensionSearch': true,

  'spellingDictMaxWordLength': 16,.

  "spellingDictMinNumWordOccurrences": 4.

  'spellingDictMinWordLength': 3

  }

  }

  }

  Can someone help me solve this problem? For this reason, my application does not work with ATG modules...

  Thanks in advance.

  Hi all

  I could solve the problem.

  First, I removed the label of 'system' and run index_config_cmd.bat set-config-f o C:\Endeca\Apps\MyApp\config\index_config\index-config.json all, to update the indexing configuration.

  In addition, I forgot to create the dimension dim.product.brand to product-sku-output - config.xml file. I created it, and now it is not working properly.

  Good bye.