Unique remote IP for IPSec VPN router to router

Similar Questions

• Is availble for IPsec VPN FOS 6.3 support stateful failover

  Is availble for IPsec VPN FOS 6.3 support stateful failover

  SAJ

  Hello Saj,

  Unfortunately not... stateful failover replica information such as:

  Table of connection TCP, udp xlate table ports, h.323, PAT port allocation table...

  they replicate data such as:

  user authentication (uauth) table

  Table ISAKMP / IPSEC SA

  ARP table

  Routing information

  Therefore, in the case where the main breaks down, the IPSEC vpn will be reformed for the failover... Meanwhile, the user will not be able to access the applications...

  I hope this helps... all the best... the rate of responses if deemed useful...

  REDA

• Need help for IPSEC VPN configuration.

  Hello

  I'm trying to implement a VPN IPSEC connection in my GNS3 lab and all show commands and debugs does not seem to give me clues of what is wrong or missing... can someone please help me in my troubleshooting VPN config. Here is the config for Router 1

  R1 #sh run

  crypto ISAKMP policy 1

  preshared authentication

  Group 2

  ISAKMP crypto key 6 cisco123 address 200.20.1.1

  !

  !

  Crypto ipsec transform-set esp - esp-sha-hmac CISCO_SET

  !

  map VPN_map 10 ipsec-isakmp crypto

  ! Incomplete

  defined by peer 200.20.1.1

  Set security-association second life 190

  game of transformation-CISCO_SET

  match address INT_TRAFFIC

  !

  !

  interface Loopback1

  IP 172.16.1.1 255.255.255.255

  !

  interface Loopback2

  172.16.1.2 IP address 255.255.255.255

  !

  interface FastEthernet0/0

  IP 200.11.1.1 255.255.255.252

  IP ospf 1 zone 0

  automatic duplex

  automatic speed

  card crypto VPN_map

  !

  router ospf 1

  Log-adjacency-changes

  network 172.16.0.0 0.0.255.255 area 0

  !

  router bgp 65001

  no synchronization

  The log-neighbor BGP-changes

  200.11.1.0 netmask 255.255.255.252

  neighbour 200.11.1.2 distance - as 65030

  No Auto-resume

  !

  IP forward-Protocol ND

  !

  !

  IP http server

  no ip http secure server

  !

  INT_TRAFFFIC extended IP access list

  IP address 172.16.0.0 allow 0.0.255.255 192.168.0.0 0.0.255.255

  IP address 172.16.0.0 allow 0.0.255.255 192.168.0.0 0.0.255.255 connect

  end

  R1 #sh crypto isakmp his

  IPv4 Crypto ISAKMP Security Association

  status of DST CBC State conn-id slot

  IPv6 Crypto ISAKMP Security Association

  R1 ipsec crypto #show her

  Nill...

  R1 #sh debugging

  Encryption subsystem:

  Crypto ISAKMP debug is on

  Engine debug crypto is on

  Crypto IPSEC debugging is on

  Regulation:

  memory tracking is enabled

  R1 #sh ip route

  Gateway of last resort is not set

  200.20.1.0/30 is divided into subnets, subnets 1

  B 200.20.1.0 [20/0] via 200.11.1.2, 01:28:21

  200.11.1.0/30 is divided into subnets, subnets 1

  C 200.11.1.0 is directly connected, FastEthernet0/0

  172.16.0.0/32 is divided into subnets, 2 subnets

  C 172.16.1.1 is directly connected, Loopback1

  C 172.16.1.2 is directly connected, Loopback2

  R1 #ping 200.20.1.1

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 200.20.1.1, wait time is 2 seconds:

  !!!!!

  See you soon,.

  Fabio

  Nice Catch. The key word 'Incomplete!' should have reported it.

  Please close the issue as resolved - user error

  Thank you
  Brian

• "ITS creation failed" problem for IPSec VPN

  An ASA 5100 is used to provide VPN access for my business. The configuration was made by a permeable man who has been missing for some time, and the configuration used to be OK until this morning. This morning, some users reported that their VPN would have fallen once got connected. I checked the ASA and ASDM, I see every time when user deletes, it IPSec tunnel is always action. Furthermore, I faked the problem and got the newspaper of errors such as:

  1 11:14:45.898 12/06/07 Sev = WARNING/3 IKE/0xE3000065 could not find an IKE SA for 10.2.1.8. Abandoned KEY_REQ.

  2 11:14:45.898 12/06/07 Sev = WARNING/2 IKE/0xE3000099 could not open the P2 generate a new key: error detected(Initiate:176)

  3 11:14:45.898 12/06/07 Sev = WARNING/2 IKE/0xE3000099 cannot open the QM (IKE_MAIN:458)

  On the side of the AS I did "debug crypto isakmp" and 'debug crypto ipsec' and I got the following errors:

  iscoasa # ERROR IPSEC: expiration of the timer of the asynchronous operation, SPI: 0x114CA5B6, user: roeladmin, peer: 202.x.x.70, time: 2 seconds, ctm_ipsec_create_sa:856

  IPSEC ERROR: Material outside ITS create command failed, SPI: 0x114CA5B6, error code: 0 x 17

  IPSEC ERROR: Asynchronous Operation timeout expired, SPI: 0x61BE2022, user: roeladmin, peer: 202.x.x.70, time: 2 seconds, ctm_ipsec_create_sa:856

  IPSEC ERROR: Cannot add a user auth, SPI input: 0x61BE2022, user: roeladmin, peer: 202.172.62.70

  IPSEC ERROR: Cannot create an inbound SA SPI: 0x61BE2022 document

  IPSEC ERROR: Unable to complete the command of IKE UPDATE

  12 June at 14:25:13 [IKEv1]: Group = LANWORKS, Username = roeladmin, IP = 202.172.62.70, error QM WSF (P2 struct & 0 x 4699058, mess id 0xf37ec6f4).

  12 June at 14:25:13 [IKEv1]: Group = LANWORKS, Username = roeladmin, IP = 202.172.62.70, peer table correlator Removing failed, no match!

  IPSEC ERROR: Material Inbound ITS create command failed, SPI: 0x61BE2022, error code: 0 x 17

  It shows that ITS creation has failed. But I can't find the problem with the configuration. Can someone help me on this? Thank you

  Outgoing material ITS create command failed, SPI: 0x114CA5B6, error code: 0 x 17

  It is a hardware problem, reset the firewall and it will work, I saw 4 times in different ASAs

  Please hate the post if help.

• Certificates for IPSEC vpn in ASA 8.0 clients

  Hello!

  I have configured MS CA and I have setup client vpn and ASA 7.0 make tunnel with certificates.

  Same configuration does not work with ASA 8.0 I get the error

  CRYPTO_PKI: Check whether an identical cert is

  already in the database...

  CRYPTO_PKI: looking for cert = d4bb2888, digest = handle

  B8 74 97 f3 bf 25 1 c e5 2nd e5 21 3rd d1 93 15 d6 |... t...%...! >....

  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND

  CRYPTO_PKI: Cert not found in the database.

  CRYPTO_PKI: Looking for suitable trustpoints...

  CRYPTO_PKI: Found a suitable trustpoint authenticated A1.

  CRYPTO_PKI (make trustedCerts list) CRYPTO_PKI:check_key_usage: KeyUsage Incorrect

  (40)

  CRYPTO_PKI: Validation of certificate: State failure: 1873. Any attempt of recovery

  If necessary revocation status

  ERROR: Certificate validation failed. Peer certificate's key usage is not valid, ser

  Number of the IAL: 250F3ECE0000000009AF, name of the object: cn = xxxxx, unit of organization = xxxx, o = xxxxx, c =

  XX

  CRYPTO_PKI: Certificate not validated

  Why the use of the key is invalid? What model of certificate must be used in MS in order to get a regular use of the key?

  The schooling of CA's Terminal.

  Thank you!

  The cert needs to have defined Digital Signature key usage.

  Don't know what models are available on MS, but it should be something like "User Ipsec" I guess.

  Make 8 ASA behave like ASA 7 (i.e. disable th control on the use of the key of the cert), configure:

  Crypto ca trustpoint

  ignore-ipsec-keyusage

• Ask/dissemination of certificates for IPSEC VPN user

  Hi all

  I have therefore an ASA established the connection to an LDAP, an SSL certificate signed for the cert of the device and use IPSEC IKEv2 VPN connections that are authenticated by the LDAP username and password and X.509 certificates.

  I have a CA server root of Microsoft Windows server 2012 (State in offline mode) and a Windows server 2012 subordinate certification authority server. Both are 10-year Certification authorities.

  To generate certificates VPN I'm going to the AC Sub, go to certificates (local computer) > personal > right click on the white space > all tasks > advanced operations > ask personalized.

  I have set up my cert accordingly and enable private key export.

  I submit new request to the CERT service. authority on the CA of Sub (same machine as before). I issue the certificate, and then export the certificate with the private key. I send this to my user, then they install this certificate in the personal certificates store and access the VPN access using this cert more username and password they have been assigned (no there is no possibility for them to ask their own PC)

  Question 1: Is there an easier way to do this? Command line? Script? preconfigured with the certificate settings .ini file?

  Question 2: These certificates are only 1 year. How can I generate certificates that are longer than that. I'm jumping for 3 years.

  Thank you!

  BROKEN

  Well it's quite simple setup-wise when you chose to go down the path of the client certificate. It is generally easier to use SCEP (Simple Certificate Enrollment Protocol) Protocol to manually deploy certificates. There is an example of a configuration Definition here.

  There is also a good presentation (or several) of Cisco Live. I recommend that you take a look at this one from 2012: Practice of PKI for VPN.

  In this presentation, he you (slide 39) specifically shows how to create a new certificate template and set the validity period for the value by default 1 years.

• ASA - 5540 used for IPSec VPN only - I can do away with Nat 0?

  I'll use an ASA 5540 as our head of VPN endpoint only - and not as a firewall.

  Also, we have a class for our company internal address space routable B address, so we don't need NAT. I would like to disable the function NAT 0 if I can so I always add NAT 0 to ensure that the 5540 does not NAT.

  Y at - it an easy way to disable the need using NAT 0?

  Are there any of the draw to do that?

  You can disable the use of nat 0 disabling the nat control.

  To achieve this, go to the global configuration mode and use this command:

  no nat control

  To check whether you have it turned on, you can check it with:

  SH run nat-control

  See you soon!

  -Butterfly

• ASA static IP Addressing for IPSec VPN Client

  Hello guys.

  I use a Cisco ASA 5540 with version 8.4.
  I need to assign a static IP address to a VPN client. I saw in the documentation Cisco that this can be done to validate the user against the local ASA and in the user account database, you assign a dedicated IP address, or using the vpn-framed-ip-address CLI command.
  The problem is that the customer never gets this address and it always gets one of the pool in the political group. If I delete this pool, the client can't get any address.
  No idea on how to fix this or how can I give this static IP address to a specific VPN client?
  Thank you.

  Your welcome please check the response as correct and mark.

  See you soon

• Router configuration Cisco for the IPSec VPN with VPN in Windows 7 builtin client

  Where can I find an example config for IPSec VPN where Windows 7 native client to connect to the Cisco routers. I use the cisco 881w, in this case.

  Thomas McLeod

  Native Client Windows supports only L2TP over IPSec. Example at the end of this doc may be enough for you:

  http://www.Cisco.com/en/us/docs/security/vpn_modules/6342/configuration/guide/6342vpn4.html#wp1036111

  I've not personally configured L2TP/IPSec on IOS, only on ASA, so cannot be 100% sure that the config in the link works, but the general idea should be ok.

• ASA5505: Configure the ASA for IPSec and SSL VPN?

  Hello-

  I currently have my 5505 for SSL AnyConnect VPN connections Setup.  Is it possible to set up also the 5505 for IPSec VPN connections?

  So, basically my ASA will be able to perform SSL and IPSec VPN tunnels, at the same time.

  Thank you!

  Kim,

  Yes, you can configure your ASA to support the AnyConnect VPN IPSec connections and at the same time.  In short, for the configuration of IPSec, you should configure at least a strategy ISAKMP, a set of IPSEC, encryption, tunnel group card processing and associated group policy.

  Matt

• ASA 9.2 IPSEC VPN

  I have ASA version 9.2 (2) 4 - model 5515

  I need to configure IPSEC VPN site-to-site.

  Can anyone share with me the example of ASA 9.2 CLI for IPSEC VPN configuration?

  Congratulations to find a solution to your problem. Thank you for posting on the Board to indicate that the issue is resolved and to share the solution. This can help other readers in the forum.

  HTH

  Rick

• IPSec VPN with compression

  Hi all

  I find this compression of supporting IPPCP 2600XM for IPSec VPN. It seems that it is supported only with a VPN module, is it?

  What would you say if I don't have module VPN, but the IPSec VPN configuration and compression for a connection low speed?

  BTW, the IPSec VPN and "compress stac" can co-exist?

  Also, what kind of compression support in 28xx with IPSec VPN?

  Thank you very much.

  MAK

  MAK,

  It depends on the installed vpn module. The previous support compression, but the compression is performed in software, not on the card, which offers only encryption. For this to work, you must run IOS 12.2 (13) T or later.

  If your previous IOS running, you cannot use compression alongside encryption PURPOSE cards at all.

  The latest maps AIM-VPN /? P II IPPC support in hardware.

  More information is here:

  http://www.Cisco.com/en/us/products/HW/routers/ps259/products_data_sheet09186a0080088750.html

  This link displays information related to the release of functionality of software compression of 12.2 (13) T

  http://www.Cisco.com/en/us/products/SW/iosswrel/ps1839/products_feature_guide09186a0080110c00.html#1027177

  Thus, the options you have depend on the IOS and the card BUT you have.

  Beginning IOS and card without compression

  12.2 (13) T and IOS beginning, hardware encryption software compression

  Last map and supporting encryption and hardware compression IOS.

  I'm unsure of the 2800 series, I expected that they support the latest novelty of compression and hardware encryption.

  Andy

• VPN remote ipsec on router

  Hi, I have configured remote ipsec vpn on my router, now that's the job. Only small problem, I want my group ENCRYPTED key, but when I come running, this key still UNENCRYPTED, a bug?

  test group crypto isakmp client configuration

  6 - key cisco <===== i="" want="" this="" key="">

  I have configured the password encryption service , still have the same problem.

  IOS version 12.4 (9) is T7.

  Thank you!

  Hello

  It is not a bug, this key is not encrypted by default, I don't know why.

  If you want to encrypt this key, use:

  • password-encryption key config-key [key master]

  • aes encryption password

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00801f2336.shtml

  Best regards

  Please note all useful messages and close issues resolved

• AnyConnect 3.0 supports IPSec VPN for remote access?

  Hello world

  I've read about Cisco AnyConnect 3.0 issues that it supports IPSec VPN for remote access:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html

  I downloaded and installed the Client AnyConnect Secure Mobility Client 3.0.0629, but I'm not able to get the IPSec VPN works. Also, it has no option to use the previous of Cisco IPSec VPN client PCF files.

  Can someone point me in the right direction to get IPSec VPN AnyConnect 3.0 work?

  Thank you in advance!

  Hello

  Takes AnyConnect support IPSEC from version 3.0, but only in combination with IKEv2.

  There is no option to use a CPF file with it and the config should be pushed through a profile Anyconnect.

  More information on this:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect30/Administration/Guide/ac02asaconfig.html#wp1325361

  You should also change the ASA config so that it accepts negotiations IKE v2:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/vpn_ike.html#wp1144572

  Kind regards

  Nicolas

• AnyConnect VPN client can be used for IPSec remote access VPN connection?

  I think I heard it somewhere that AnyConnect VPN can be used for connections SSLvpn IPSec VPN. Is this possible? Thank you!

  No, the Anyconnect software cannot be used to establish the framework for a VPN IPSEC IKE.