unknown computers on my office listing

Similar Questions

• I can't access my e-mail account on several computers in my office (Microsoft 2003) _

  Outlook 2003... I have an email account set up on multiple computers in our office. However, even if my email address is the same on each computer, my Inbox receives many messages on each computer.

  In other words, if someone sends me, how did I get the message on a computer, but not the other? Also, when I send an email, I can see it in my folder 'sent' on this computer, but there is nothing there on another computer.

  All of my accounts are configured as POP3 accounts. Does it matter?

  Thanks for the help.

  Hi gktravel,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Outlook and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I remove 2 unknown entries from my contact list?

  original title: LIST OF CONTACTS

  HOW TO MAKE 2 UNKNOWN OUT OF MY CONTACT LIST, I SEE THEM ONLY WHEN I HAVE SOMETHING, NOT SUBMIT WHEN I EDIT OR SHOOT TO THE TOP OF MY LIST OF CONTACTS.

  Thank you

  It of when you start to type an address and AutoComplete shows these contacts?

  How to delete registration completion email in Windows Mail
  http://www.Winhelponline.com/articles/245/1/how-to-clear-the-email-auto-complete-entries-in-Windows-mail.html

  How to remove an address from the list of AutoComplete in Windows Mail
  http://email.about.com/od/windowsmailtips/Qt/et_del_autocomp.htm

• AppleScript to add computers to a computer list

  I would use AppleScript to add computers to a list of computers to ARD. Every morning I get a list of Mac that are supposed to work automation, but the automation server has lost contact with some. Then I understand why. Some mornings there are three and it is easy, but some mornings there are 60. I thought about how to parse the list of Macs. However, I have had no success setup an AppleScript script for 'control' each of the incriminated Mac (and I tested with those who are active). Nor I had luck adding Macs to an existing list. Macs are all already in all computers. Same attempt to add a single Mac failed. When I run this script ARD pop to the front, but nothing happens.

  the value sRemoteComputer to 'deadMac001' in the form of text

  Tell application "Remote Desktop"

  activate

  Add sRemoteComputer to computer 'list Test '.

  tell the end

  Through my tests, it seems that adding a computer from scratch, you need to know the IP. But these Macs are already in my ARD I do not need to add them to the ARD, I just need to add them to a list of computers. Any suggestion would be appreciated! At work, I'm updating with El Capitan 10.11.4 and ARD 3.8.

  -Doug

  You add enough details on your processes to be more specific, but here's a simple script to create a new list and add a computer to the list "all computers":

  Tell application "Remote Desktop"

  the value of myList to make the new list of computers

  Set the name of myList 'Scripty list '.

  Add (the last computer to the list of computers "All computers") to myList

  tell the end

  Otherwise, you could say:

  "Add computer"Brian 27\ 's"iMac" in myList

  HTH,

  -Brian

• How to remove 2 computers on my network list?

  

  Here are the 2 computers listed on my computer network. I want to DELETE them. They seem to intervene in my system.

  You will see here below where she is on my list:

  

  Can someone show me how to remove these 2 computers in my own network computer that is actually called Glenn.Fluehr - PC

  Thank you

  Glenn Fluehr

  The results of the command nbtstat - n are normal, they are all for your computer and the working group.  Do you want the unwanted network computers in the output of the command nbtstat-r ?

  John

• WMP streaming media is off again to display other unknown computers

  Hello im using Windows 7 (64-bit).

  My wmp streaming media has been disabled by me, since I want except or stream or play my media files with other users.

  Also in my computer > network > Network Center and shares settings > advance change sharing settings >
  discovery of network and file sharing are turned off.

  But today, when I opened my wmp (internet disconnected at this time), I saw the name of an unknown person/user/computer, under the option "other libraries" WMP. After a few minutes, it disappeared from the list. But after a few minutes, a few other names appeared.

  By unknown user/person/computer, I mean people who do not live in our House, but are on the same network (where I am)

  Im a little worried here. Can PCs/unknown users connect to my system or they can access my support if they appear in my wmp, even though my file sharing or streaming media is off? Help, please.

  Here is the screenshot
  

  Hello!
  Here we explain how to change the provile network in Windows 7: http://www.sevenforums.com/tutorials/43629-network-location-set-home-work-public-network.html

  See you soon
  Julia

• Firefox Sync on different offices-list of sync'd data-is it possible to see what we have sync in our accounts?

  Good day to you, members of the community!
  Have a very small but very important (I think, not only to me) question.
  It will be possible to see in https://accounts.firefox.com/settings?uid=etc what we sync'in (I want to say list of tabs, password section, session, etc.)?
  For example, we have submenu in 'History' - 'bookmarks of other devices.
  There I can see what bookmarks I have on the other device.

   But no way to see passwords, preferences, history, active session. Will the devs introduce such features in next versions of Sync?
  

  In addition, some possibilities to separate one single device from others? (I have 4 PCs, 2 of them I need to synchronize only the Favorites, tabs & passwords, the other 2 - only the bookmarks & tabs). Now, if I want to work with such a way, I need to create 2 different profiles for each pair of these PC synchronization.

  Sorry, the data saved on the server is encrypted and cannot be read by anyone as it is a server or even outside of a Firefox browser. The encryption is done on the upload to the server for synchronization and encryption is done when the data comes back from the server synchronization that happens in an installation of Firefox. The 'key' stays inside Firefox, it is not sent to the sync server - no one has access to this 'key', but you, and it's inside Firefox stored in the Firefox account credentials in the password field.

  As much as this is possible in the future - slim to no chance. To make this possible sync will have to be completely rewritten to change the encryption protocol. Something simply not developers to Sync ever wanted as a feature.

  Each installation of Firefox can be put in place for what is synchronized in Options > Sync. Select all or all - tabs, Favorites, passwords, history, modules, preferences.

  Separate what sync gets had however you want or use 2 different accounts of synchronization for each pair or the PC. You can even setup the same version of Firefox on a PC with separate profiles and have separate data on each profile with a separate for each profile synchronization account. But the combination you put 2 and 2 data synchronization, but 2 is becoming more in sync would have can be made with a single account. Deselect the option just data types, you want synchronized on 2 devices.

  In which your question 2nd separate or different add-ons by device; Deselect the option modules if you do not want add-ons that you want to synchronize or when they are synchronized to do not what they are deleted when you uninstall an add-on on another device (or deselect Add ons on the device that you want to remove an add-on so that 'action' are sent to the server synchronization, and then to other devices).

• I have an unknown player showiing in my list of drives in MY COMPUTER (Q)

  I tried to open it and it says that I do not have access. I can not open it no more

  You installed Office 2010?  Its Click-to-Run function creates a virtual drive of q.  For more details, please visit Click-to-Run: Office offering in the 21st century in the Microsoft Office 2010 engineering blog . Boulder computer Maven
  Most Microsoft Valuable Professional

• computers reomposed of office with the new machine virtual/snapshot - display now 2 NICs (a grayed out)

  I have reconstructed my pool of offices of origin VM1/snapshot1 to

  an another VM2/snapshot1

  Files user still there but I seem to be duplicate desktop icons, there are also 2 adapters vmxnet3 with a grayed.

  Why did I get this?

  found a solution for this.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1020078

  After installation of the patch from ms on the image a recomposition has worked for me.

  Thank you

  It seemed to have also fixed a thinprint redirection problem printer, I've had more early as well

• After modernizing seen at 5.2, computers available to office-related clones pool fail

  Hi all

  I hope someone has an idea,

  I was running 5.1.1 environment including composer and deployment work without any problem.

  After the upgrade to 5.2 (including the composer) and agents on the virtual machine parent linked clones deployment fails.

  the virtual machine is created, but the customization goes down, if I can I connect to them, I see that there is no network adapter. which is weird.

  now, the virtual machine has of course a network card, but for some reason, the operating system does not see.

  I am using windows 7 64 bit and vmxnet3.

  If I go back to the old agent 5.1.1 it works.

  Does anyone have an idea?

  Thank you

  Hello

  I think that this address your problem http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2007319 KB

  If not do it ' can you build new virtual machine with e1000 adapter and view agent 5.2 for testing network.»

  Concerning

  Mohammed

• Unknown column 'name' in 'field list '.

  I use Dreamweaver MX and am having a problem with the connection from php, mysql. First of all, the connection between apache, mysql, php and Dreamweaver MX seem to be fine communitating. I recently added fields to an existing table in a database. I can check the fields are there through an external program and the names I use are correct. I've updated the program to make the new field names (checked and double-checked the correct spelling, variable, etc...) The program and the database were communication correctly before I added the new fields, and the program will still read the old existing fields, but not the newly created fields. When I go to the application tab and check that the database of my database is here, when I drill down to the table, none of the new fields appear. I have delected recording of data in the application tab and recreated with a different name. It connects, but will not display the new fields. All the old fields appear fine. How can I force Dreamweaver to query the database and pick up the newly created fields? I'm puzzled.

  Nevermind, I'm a fool!

• Why is my iPhone 5 number listed as 'unknown' and not listed in iMessage and FaceTime?

  I am a customer of StraightTalk. Originally, I had an iPhone CDMA 5 purchased directly from this company. After three years, the battery swelled and I came out of the Apple Store on Thursday with a replacement. After inserting a SIM to speak directly into the device and setting up, I can make calls, send text messages, use the cell data, etc.

  However, my phone number in the settings is listed as 'unknown', and it is not listed at the top of the contacts screen. I can't send messages in my phone number iMessage, because it is not even listed as an option. Ditto for FaceTime. After several hours on the phone with Straight Talk, they determined that my phone service is configured properly, and it is a phone number.

  Does anyone have a solution for this? It is incredibly frustrating that the iPhone 5 does every thing I need to do, and I prefer to keep my phone from replacement $ 75 for three years before moving on to an iPhone SE.

  Hello, smirza!

  Thank you for using communities of support from Apple!  What I understand in your post, you got a replacement iPhone 5 and have found that your phone number is not listed in settings > phone and iMessages/FaceTime.  Your number should certainly be in all those places, so I'm happy that you came here, then we can help you understand what is happening together.  Check with your mobile provider was a big first step.  I have other ideas for you as well:

  1. It seems that you already have the latest version of iOS (9.3.4), but we will also check your carrier settings are up to date: iOS: update your carrier settings
  2. If you haven't already done so, save your iPhone on iCloud or iTunes: How to backup your iPhone, iPad and iPod touch
  3. On your iPhone, go to settings > Contacts > My Info and make sure that your personal contact (with your iPhone phone number) card is selected.
  4. Go to settings > phone > my number and see if you are able to manually, enter your number and save it.
  5. If none of these steps work, try to restore your phone from the backup that you made: restore your iPhone, iPad or iPod touch from a backup
  6. If you still don't see your issue, try restoring your phone as a new and see if your number is: use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings

  Have a fantastic week!

• Cable networking computers add wireless internet is equal to the disaster?

  We have a small office with three computers that are connected via a wired connection for the file and printer sharing.   We are in the country, so DSL or Fios or any kind of fast internet is not a possibility.  We have recently added AT & T Wi - Fi which is great, but you must disable the network connection to access the internet and, conversely, to print documents.  Is there a way to tell the wired connection it will be never used for the internet?  Or should we go 100% wireless is not to confuse the system?

  When you say your 'network cable cross' your Linksys router, I guess you mean that each computer has a cable connected to the router and not that there is an Internet connection to the router (i.e., at the back of the router, plug with the yellow label 'Internet' is empty).  It seems, however, that you used to connect to the Internet through the router, and the remains of this configuration are the cause of the confusion.

  I also note that the Linksys E-1000 is a wireless router; I guess you have this part of the router disabled (if not, see pages 19 and 20 of the user manual).

  It seems also that if someone has attempted to address the issue by making your network adapters use static IP addresses (or fixed).  It's a good start, but more needs to be done.

  The fundamental problem is that your Linksys router and the AT & T hotspot have the same local IP address, and each claims that it is the 'default gateway' to the Internet.  Because you use is no longer the Linksys router to do this, you must change several settings.

  The first thing to do is to change the local IP address of the router.  See p. 16 of the User Guide.  You have a choice: you can either have two separate completely local networks (one wired and one wireless) or you can have them on the same network - but in this case, you need to be careful that your affected addresses manually are not incompatible with the IP addresses assigned automatically by the DHCP server in the AT & T hotspot.

  Because you only have 3 computers (and possibly a printer network or 2) and the IP address manually-set from that you have watched seems to be far from the IP address automatically together on the USB adapter, we will stay with a single network, but first do the following research:

  Run the command ipconfig/all on each of your computers and make a list of IP addresses for the connection to the Local network and the wireless network connection.  For the computer that you use to provide the above information, it is information that you need to write:

  Connection to the LAN - IP address...: 192.168.1.149
  Connection network wireless - IP address...: 192.168.1.6

  You will notice that the first three sets of numbers in the two addresses are the same (192.168.1).  That's what I meant by "a network".  The important thing is that the fourth number MUST BE DIFFERENT for each device on the network.

  If your printers are directly connected to the Linksys router and not connected to one of the computers and shared, you also need to know the IP addresses of printers (if you have wireless printers, you need to keep the Linksys Wireless, contrary to what I wrote above).  If you have wireless printers but don't know how to find their IP addresses, post back with the printer brand and model).

  For the sake of discussion, I'll assume 3 wireless network connections and connections to the Local network 3 are 192.168.1.149, 192.168.1.150 and 192.168.1.151 192.168.1.4, 192.168.1.5 and 192.168.1.6.  The real numbers are not critical, as long as there is no overlap.

  Later in the process, explained the s. 16 of the User Guide, change the IP address of the frouter Linksys to 192.168.1.1 to something relatively far from other addresses, for example, 192.168.1.200 (it must be less than 255).

  Now, on each of the computers, follow these steps:

  • Open network connections (start > run > ncpa.cpl > OK)
  • Right-click on the connection to the Local network and select Properties
  • Select "Protocol Internet (TCP/IP)" and click on the properties button
  • In the 'Général' tab, the box 'use the following IP address' is probably already selected.  If this is not the case, check it.
  • If the "use the following IP address" was NOT previously selected, you will need to fill in the boxes.

  The IP address must be the number you copied down earlier (for example, 192.168.1.149).
  The subnet mask should be 255.255.255.0.
  Make sure the "Default gateway" box is empty.  It is important step.

  • Check "Use the following DNS server address."  Leave the boxes blank.
  • OK your way out

  Restart each computer and things should work OK now.

• Impossible to travel from the LAN computers through a router from cisco 887vdsl

  Hi I installed a router CISCO v887 to the Amsterdam Office

  I set up a VPN between AMS and Edinburg Office tunnel.

  1. the VPN is running

  2. I am unable to see anything of the LAN computers at the office in Amsterdam.

  3 from computers LAN I can traceroute to yahoo.com but the browser I impossible to navigate on yahoo.com and web page hanged in this situation (Web site waiting for response). But nothing comes and LAN users are unable to use internet.

  Help, please

  My configurations are

  IP source-route

  !

  !

  !

  !

  IP cef

  IP domain name xxxxxx.com

  8.8.8.8 IP name-server

  No ipv6 cef

  !

  username xxxxxxxxxxxxxxxxx

  username xxxxxxxxxxxxxxxxxxx

  !

  !

  VDSL controller 0

  !

  property intellectual ssh version 1

  property intellectual ssh pubkey-string

  username xxxxxxx

  ssh - rsa xxxxxxxxxxxxxxxxxxx key hash

  quit smoking

  !

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  ISAKMP crypto key xxxxxxxxxx address 94.xx.xx.xx

  !

  !

  Crypto ipsec transform-set esp - esp-sha-hmac AMS - SET

  !

  map AMS - R 10 ipsec-isakmp crypto

  the value of 94.xx.xx.xx peer

  AMS - Set transform-set

  match address 102

  !

  !

  !

  !

  !

  interface Ethernet0

  no ip address

  PPPoE-client dial-pool-number 10

  !

  !

  interface Ethernet0.6

  encapsulation dot1Q 6

  PPPoE-client dial-pool-number 10

  !

  interface BRI0

  no ip address

  encapsulation hdlc

  Shutdown

  Multidrop ISDN endpoint

  !

  !

  interface FastEthernet0

  load-interval 30

  Speed 100

  PPPoE-client dial-pool-number 10

  !

  !

  interface FastEthernet1

  !

  !

  interface FastEthernet2

  !

  !

  interface FastEthernet3

  !

  !

  interface Vlan1

  10.0.12.1 IP address 255.255.255.0

  IP nat inside

  activate nat IP

  IP virtual-reassembly

  !

  !

  interface Dialer0

  no ip address

  Shutdown

  !

  !

  interface Dialer10

  the negotiated IP address

  NAT outside IP

  IP virtual-reassembly

  encapsulation ppp

  Dialer pool 10

  Dialer-group 10

  PPP authentication pap callin

  PPP chap hostname xxx@xxx-ZDSL

  PPP chap password 0 xxx

  PPP pap sent-username@xxx-ZDSL password 0 xxx xxxx

  No cdp enable

  AMS - R-crypto card

  !

  !

  IP forward-Protocol ND

  IP http server

  no ip http secure server

  !

  !

  IP nat inside source overload map route sheep interface Dialer10

  IP route 0.0.0.0 0.0.0.0 Dialer10

  !

  access-list 102 permit ip 10.0.12.0 0.0.0.255 10.0.0.0 0.0.3.255

  access-list 102 permit ip 10.0.12.0 0.0.0.255 172.16.0.0 0.0.255.255

  access-list 102 permit ip 10.0.12.0 0.0.0.255 172.17.0.0 0.0.255.255

  access-list 102 deny ip any one

  access-list 175 deny ip 10.0.12.0 0.0.0.255 10.0.0.0 0.0.3.255

  access-list 175 deny ip 10.0.12.0 0.0.0.255 172.16.0.0 0.0.255.255

  access-list 175 deny ip 10.0.12.0 0.0.0.255 172.17.0.0 0.0.255.255

  access-list 175 allow ip 10.0.12.0 0.0.0.255 any

  Dialer-list 10 ip protocol allow

  Dialer-list 1 ip protocol allow

  !

  !

  !

  sheep allowed 10 route map

  corresponds to the IP 175

  !

  !

  control plan

  !

  !

  !

  Line con 0

  no activation of the modem

  line to 0

  line vty 0 4

  access-class 1

  exec-timeout 30 0

  privilege level 15

  password xxxxxx

  local connection

  preferred transport ssh

  entry ssh transport

  !

  max-task-time 5000 Planner

  end

  Hi Marc,

  Please add these lines highlighted below on both interfaces.

  interface Vlan1

  IP tcp adjust-mss 1412

  interface Dialer10

  IP mtu 1452

  Please update.

  Thank you

• Computers on the local network does not show up after the installation of macOS Sierra

  Shared on my LAN Macs make their appearance is more after the installation of macOS Sierra. See the attached servers is checked in the preferences of the Finder and the computers appear in the list of DHCP clients on the router. I can see these computers to each other. Sharing is disabled on the computer of the Sierra. Any ideas?

  Thank you!

  p.s. I can not even 'go' to the IP address of these computers.

  Correction: I can afp: / and vnc: / to IP addresses (and so far as a temporary solution, I assigned permanent IP addresses in the router on all computers on the local network). Once I afp: on a local computer, it appears on the side bar of the Finder under shared devices, well I saw several times it appears and then disappears. Nothing has changed on the network since the installation of Sierra.