Unknown device (error Code 28)

Similar Questions

• NVIDIA nForce Serial ATA Controller has a problem driver ID: ROOT\UNKNOWN\0000 error code: 10

  NVIDIA nForce Serial ATA Controller has a problem driver ID: ROOT\UNKNOWN\0000 error code: 10

  Hi JimmyGoings,
   
  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
   
  In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
   
  You can follow the steps in the article given below to resolve the problem.
   
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104
   
  Check to make sure that the controller is enabled in the BIOS, if there is physical damage to a motherboard, it is usually fatal.
  In addition, go to the nvidia /drivers and automatically search the chipset drivers and install it.
   
  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• HP Pavilion all-in-one 200 pc: unknown device error

  Hello

  I can't update all devices, the following problem

  unknown device error.

  Hardware ID are:

  ACPI\TE8715

  * ITE8715

  Location on Intel ICH10 LPC Interface Controller 3 a 18

  unknown deloper, no driver available!

  Thanks for the tips.

  Hello:

  This is your ITE CIR receiver.

  Unfortunately, I do not know where you can find a W7 driver for it.

  Try Windows Update of the device - automatic driver search.  Be connected to the internet.

  Description of the model you posted draws upward of way too many models for me determine which one you actually.

• I/O device error code: 10 and if I can't open my memory SD/MMC card when it is inserted.

  Original title: why I can not open my card memory SD/MMC when inserted?

  What is the problem & how do I fix?  . I/O device error code: 10 when I try to read from memory card.  OS: XP, 32-bit Clean up memory and maintenance?  Never had a problem before.          Teddi

  Hi cindy,.

  Did you the latest changes on the system?

  You can read the following article and check if it helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• Unknown hardware error code C0000b6d

  I've been browsing the other hardware error codes and have not seen this exact one. My system is a Dell Dimension 8400. This happened directly after a notice flashed on the screen that Avast found a threat, but there wasn't anything I had to do.  Then poof the blue screen of death with the 'unknown hardware error code c0000b6d.

  After that hand, stopping and restarting I get only the Dell screen flash then a high cursor flashing screen left. Cannot get in Mode safe on reboot... just cursed cursor.
  Keyboard strokes are nothing. Help! Katydidtoo

  Hi Katydidtoo,

  1. do you have the Windows XP installation CD?

  Method 1

  It is possible that the hard disk has errors that need to be repaired by using the Windows XP CD.

  If you have the Windows XP CD then I suggest that you run chkdsk on the computer to analyze and repair corrupt errors on the hard drive.

  CHKDSK is available in the Windows Recovery Console and can be a very valuable tool in the treatment of a system that will not start correctly. The use of the Recovery Console is discussed elsewhere, but note that many systems have been rescued by the command chkdsk C: /R Recovery Console there are only two: / p: performs a comprehensive check of the drive and corrects any errors. Does not check if bad sectors / a: locates bad sectors and recovers readable information

  See the Microsoft article below to find out how to start into the recovery console and try the steps above.

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

  Method 2

  If the previous step fails, then check out the Microsoft article and try the steps mentioned below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• I tried to back up my hard disk but to halfway through it says I/O device error code: 0x8007045D.

  Original title: windows 7 backup of IO error 0x8007045D

  I tried to back up my hard disk but to halfway through it says I/O device error code: 0x8007045D.  I disabled mcafee to see if it was interfering, but that did not work.   I have an acer aspire laptop with windows 7.  I was not able to save anything.  Does anyone have any suggestions?

  Sheila,

  This can happen if your virus scanner (or another application of heavy disk activity) access to training. You can try running chkdsk in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you run chkdsk in safe mode and you still have problems of backup, try to perform a clean boot to disable all third-party applications and test support upward:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blu - ray error: "device error" Code: "3", note: "AS-StorageError =-97060.

  I just lost 2 Blu - Ray discs, try to burn a project. I tried to burn a very simple project: a chapter two Blu - Ray with two episodes of 55 minutes of a TV on this topic show.  Recently I used the exact same computer to do exactly the same work successfully, so I don't know what the problem is.
  There are no menus in the project: it's just a rudimentary auto play disc with stereo sound.  Layer the watch 24.37 GB used on a single BD disc.

  The files are consistent and that construction starts, the following error appears:

  Blu - ray error: "device error" Code: "3", note: "AS-StorageError =-97060.

  System information:

  Windows 7 Professional

  Service Pack 1
  Intel i7 8 cores @ 2.80 GHz

  12 GB 1600 RAM

  AMD Radeon HD5870
  File HD 7200 RPM WD 3 TB NTSC system

  Pioneer BD - RW BDR-206 ATA burnerncore

  Adobe still CS6

  I do not see another example of this type of error the "97060" in it.

  I never have confidence I think remember me this, but note that the GB 24.37 may actually be 24.37 GiB, which may be too big to fit on a single layer Bluray. You should get another error, but who knows.

  I would try the building to a folder to see if this succeeds. Then you can return to the question of the combustion. Many of us prefer ImgBurn to burn and not yet.

• Microsoft's Teredo tunneling device error Code 10

  I have an error against the peripheral Microsoft tunnelling teredo (does not start Code 10). I tried the update driver software option, but the computer has an error in the installation of the driver. I checked for Zone Alarm programs, but I don't have them on my PC. I use Windows 7 64-bit OS.

  I tried the fix described REGEDIT too, but I don't have any "Disabled components" in the pane right (as described in trouble).

  I have problems with my printer Epson Stylus Color 460 - is not printing. I tried several times to uninstall and reinstall the printer as well. I suspected all the stems of this problem with the piercing device driver. Could anyone help with any other suggestions? Thank you very much

  Hello, Gabriella,.

  Please keep us updated on the status of the issue.

  I'm sorry for the late reply. I appreciate your efforts to resolve the issue.

  For the printer problem, I suggest you try to install the printer driver in compatibility mode with Windows 7 and check if that helps.
  Please, use this link to download the printer driver.
  http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-GB&data=qBjAbS6NcI3HuZUJ4LNiQ3en9sCSaRpAhAAVlmxMhA4U003D&TC=6

  HOW to: Install a hardware device using the Compatibility Mode driver
  http://social.technet.Microsoft.com/forums/Windows/en-us/80cae5ee-dc98-4A2F-8284-a1ab826059b7/how-to-install-a-hardware-device-driver-using-compatibility-mode?Forum=w7itprohardware

  Device for Microsoft teredo tunneling, question I suggest you try using the steps described in Microsoft Knowledge base article.
  Reference:
  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
  http://support.Microsoft.com/kb/943104

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Thank you

• loading photo to DVD files, have I/o device error:-code 0x800745D

  I'm in the middle of the copy of certain records of picture on a DVD, it fails to do the job and come with I/o device error. the error code is 0x800745D can you explain?     concerning the

  Hello,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it looks that you are having problems with the 0x800745D error code when you download photos on DVD.

  1. the error code is 0x8007045D?

  2. were there any changes (hardware or software) to the computer before the show?

  Check the disc and see if the problem persists.

  Check a drive for errors (Windows 7)

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Meet us if you encounter problems with downloading the pictures on DVD or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• 43 after device error code Windows update application yesterday.

  After that Windows application updated yesterday, Windows disabled my Nvidia GeForce 6800 graphics with code 43. I reinstalled the latest Nvidia drivers, but the error persists. I tried to uninstall the update, but still the Windows system restore fails no matter how far back, I try.

  Error code 43 is a driver error. Did you install optional updates Windows (such as the graphics driver)? If so, uninstall the graphics driver update, reboot and reinstall the Nvidia driver.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• That doesn't mean no average audio output device - error Code 10 on sound driver

  I have a Code 10 message on my driver audio sound.

  Hello

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the USB controller

  Follow the given article below for more information.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 1:

  You can uninstall the existing driver from Device Manager before installing the new.

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. Locate the yellow exclamation mark under portable devices, right-click on it and select Properties.
  3. go tab driver and click Uninstall to uninstall the driver associated with the device.

  Once the uninstall is complete, restart your computer and check if the issue is resolved.

  Method 2:

  I suggest you update the audio drivers on the manufacturer's Web site see the link below:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  See also the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• Disabled Bluetooth wireless card device error Code 43 Manager

  Original title: Bluetooth wireless card disabled by windows.

  There is this problem that I've been repeatedly for a long time where randomly, my Dell Wireless 370 Bluetooth minicards stops working and I can't put it back on without doing a clean reinstall of the driver. Sometimes it is very difficult to do, because in this case, my computer sometimes think that my bluetooth mouse is still connected, so it won't let me activate the touchpad mouse. When this happens, I can not access my devices manually by removing the mouse. Quite simply, nothing happens when I try to open the bluetooth devices.

  I see the bluetooth in my device manager card, but the Properties window that it has this error message:

  "Windows has stopped this device because it has reported problems. (Code 43) »

  If I turn off and then turn on the device, it works very well for about 2 seconds, but then the problem comes back. Restarting the computer does not set it. Try to update the driver not fixed not. Try to reinstall the driver works only if it is completely clean uninstall, and then I reinstall mode without failure. However, the problem is never permanently attached and eventually come back somewhere between 2 days and 2 weeks later.

  I have an Alienware M17x.

  Someone at - it a way to make Windows to stop disabling the bluetooth card? In addition, it would be much easier to solve this problem if the computer would not automatically disable my touchpad (refusing to turn it back on, same with the fn - f12) when he thinks a mouse is connected. Does anyone know how to fix the part of it? It truly is a train wreck.

  Hello

  Driver is a software designed for a particular device, which communicates between the device and the operating system. Because of this feature of the device driver software is recognized by the operating system and it starts to work.

  Code 43 is displayed in Device Manager when the bluetooth device driver informs the operating system that the device failed. If the device fails, there is a problem with the device and must be replaced.

  You can contact Dell technical support for replacement and get help.

  http://support.Dell.com/

  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

• Microsoft applicant system unknown device error

  Hello

  I installed the 64-bit Windows 7, Device Manager shows missing driver unknown system compatible ACPI Microsoft

  I installed 3d keep too, but it still exists.
  model-Pavillion you p016

  Hello:

  You need this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141423-1&cc=us&DLC=en&LC=en&OS=4063&productOid=7132619&sw_lang=

• How to solve this? Blue-ray "device" error, code; 3", notes; "AS_StorageError = 97071.

  I'm on Windows 10, I get this error at 100% resulting from the burning of a reader Blu - ray yet!

  Code 3 AS_StorageError comes in several variants. You will find other reports of your 97071, but not of miracle as such. The best solution is to build an image and burn with ImgBurn.

  All of them seem to have physical storage, hard drive, or media-related questions. Keep in mind that, for Blu - ray, especially, still uses a huge amount of temporary storage.