Microsoft's Teredo tunneling device error Code 10
I have an error against the peripheral Microsoft tunnelling teredo (does not start Code 10). I tried the update driver software option, but the computer has an error in the installation of the driver. I checked for Zone Alarm programs, but I don't have them on my PC. I use Windows 7 64-bit OS.
I tried the fix described REGEDIT too, but I don't have any "Disabled components" in the pane right (as described in trouble).
I have problems with my printer Epson Stylus Color 460 - is not printing. I tried several times to uninstall and reinstall the printer as well. I suspected all the stems of this problem with the piercing device driver. Could anyone help with any other suggestions? Thank you very much
Hello, Gabriella,.
Please keep us updated on the status of the issue.
I'm sorry for the late reply. I appreciate your efforts to resolve the issue.
For the printer problem, I suggest you try to install the printer driver in compatibility mode with Windows 7 and check if that helps.
Please, use this link to download the printer driver.
http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-GB&data=qBjAbS6NcI3HuZUJ4LNiQ3en9sCSaRpAhAAVlmxMhA4U003D&TC=6
HOW to: Install a hardware device using the Compatibility Mode driver
http://social.technet.Microsoft.com/forums/Windows/en-us/80cae5ee-dc98-4A2F-8284-a1ab826059b7/how-to-install-a-hardware-device-driver-using-compatibility-mode?Forum=w7itprohardware
Device for Microsoft teredo tunneling, question I suggest you try using the steps described in Microsoft Knowledge base article.
Reference:
FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
http://support.Microsoft.com/kb/943104
Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows/back-up-registry
I hope this information helps.
Thank you
Tags: Windows
Similar Questions
-
Microsoft Teredo Tunneling adapter - error code 10
Former title: Microsoft Teredo Tunneling adapter
I got an error code 10 regarding the Microsoft Teredo Tunneling card which read, "device cannot start". I read in one of the forums that uninstall you and then restart your computer, Windows would automatically reinstall it correctly. I did, but in Device Manager registration with network cards, it is more listed. I wonder if it is still completely removed from my computer I really must installed there? Everything seems to work fine with my computer. I have Windows 7 Home Premium.
Hello Arthur,.
Thanks for posting your question on the forum of the Microsoft community.
"Teredo" is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.
I suggest you try using the steps described in Microsoft Knowledge base article.
Reference:
FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
http://support.Microsoft.com/kb/943104Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows/back-up-registrySee also:
http://TechNet.Microsoft.com/en-us/network/cc917486.aspxI hope this information helps.
Please let us know if you need more help.
Thank you
-
Original title: teredo tunneling adapter error number 10 on windows 8
on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.
It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop
I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10
Please help me
Thanks in advance
Hi Samuel,.
We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.
Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.
I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.
I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.
Make the programs more compatible with this version of Windows
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers
A Code 10 error is generated in the Device Manager in one of the following situations:
1. the Device Manager cannot start the device.
2. one of the pilots who needs the unit does not start.
3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.
We could try following common resolutions to solve the problem:
1. update the drivers for this device
2 launch a service of automated troubleshooting
3 contact material supplier technical support
For more information, please see the following article:
FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
http://support.Microsoft.com/kb/943104/en-us
In addition, this article could also be designated:
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8
Please answer us on the State of the question to help you further.
-
My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.
Hello
Windows Defender is an antispyware software, not an Antivirus.
If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.
There is nothing to worry.
Using both programs at the same time can cause system conflicts, etc.
If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):
"Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.
Right click and select Properties , ensure that Startup Type is automatic.
Once modified, click apply and OK.
Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"
.
And for now, change startup Vista programs without using Defender, use one of these methods:
"How to use MSCONFIG in Windows Vista"
http://netsquirrel.com/Msconfig/msconfig_vista.html
Or the program Autoruns for FREE:
"V11.21 Autoruns for Windows"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And try this method for the analysis of Malware
Scan of Malware in Safe Mode with network.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
See you soon.
-
Original title: windows 7 backup of IO error 0x8007045D
I tried to back up my hard disk but to halfway through it says I/O device error code: 0x8007045D. I disabled mcafee to see if it was interfering, but that did not work. I have an acer aspire laptop with windows 7. I was not able to save anything. Does anyone have any suggestions?
Sheila,
This can happen if your virus scanner (or another application of heavy disk activity) access to training. You can try running chkdsk in safe mode:
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
If you run chkdsk in safe mode and you still have problems of backup, try to perform a clean boot to disable all third-party applications and test support upward:
http://support.Microsoft.com/kb/929135
Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: why I can not open my card memory SD/MMC when inserted?
What is the problem & how do I fix? . I/O device error code: 10 when I try to read from memory card. OS: XP, 32-bit Clean up memory and maintenance? Never had a problem before. Teddi
Hi cindy,.
Did you the latest changes on the system?
You can read the following article and check if it helps.
-
I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"
I would like to reinstall the version the most recent, but before to do that click on the "fixit for me" button on the bottom of the page to
http://support.Microsoft.com/kb/2608523
Latest version
http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx
-
a security update for microsoft works 8 kb977304 with error code 646
Has had a warning of "new updates are available" in my pc - windows vista.
Tried several times and IMPOSSIBLE to download MICROSOFT WORKS 8 KB977304 with error code 646.
Help, please. Thank you
See this thread:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47>
Please let us know if that helps.
06/20 / 1107:45:19
-
I just lost 2 Blu - Ray discs, try to burn a project. I tried to burn a very simple project: a chapter two Blu - Ray with two episodes of 55 minutes of a TV on this topic show. Recently I used the exact same computer to do exactly the same work successfully, so I don't know what the problem is.
There are no menus in the project: it's just a rudimentary auto play disc with stereo sound. Layer the watch 24.37 GB used on a single BD disc.The files are consistent and that construction starts, the following error appears:
Blu - ray error: "device error" Code: "3", note: "AS-StorageError =-97060.
System information:
Windows 7 Professional
Service Pack 1
Intel i7 8 cores @ 2.80 GHz12 GB 1600 RAM
AMD Radeon HD5870
File HD 7200 RPM WD 3 TB NTSC systemPioneer BD - RW BDR-206 ATA burnerncore
Adobe still CS6
I do not see another example of this type of error the "97060" in it.
I never have confidence I think remember me this, but note that the GB 24.37 may actually be 24.37 GiB, which may be too big to fit on a single layer Bluray. You should get another error, but who knows.
I would try the building to a folder to see if this succeeds. Then you can return to the question of the combustion. Many of us prefer ImgBurn to burn and not yet.
-
Device cannot start. ISATAP and Microsoft Teredo Tunneling adapter card code 10.
original title: hardware device
Hi I have a problem with my pc in Device Manager, it is said.
Map Microsoft ISATAP. This device cannot start. (Code 10)
Map Microsoft ISATAP #2. This device cannot start. (Code 10)
Microsoft Teredo Tunneling adapter. This device cannot start. (Code 10)
I tried update driver software and when I do this it says that windows has determined the driver software for your device is up to date. So can someone give me some advice please.
THANKS IN ADVANCE
Hi macandy2010,
Run the Fixit in KB 943104. This should solve the problems of Code 10.
-
Teredo tunneling adapter error 10 code
How can I remove error code 10 adapter work?
First you only need it if you have a printer that uses it so I would start by re-instlaling printing software
It is a known problem if you have Zone alarm installed. If you have installed remove it at least to checkTo disable Teredo tunneling 6to4 interface open an elevated command prompt and type
netsh interface set terredo disabled state.To re - install- Click on start.
- Type Device Manager in the start search box, and then open it.
- Click the Action tab on top and click Add legacy hardware
then click next and next again, he will then scan and find nothing then click on the screen after that.
Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
If there is no option "Add Hardware inherited", you need to connect the unit using the tunneling. -
I have teredo tunneling problem adapter code 10
I saw that it said to uninstall and reinstall. If I do this what site should I go to reinstall too and I have to pay for it. How much does it cost?
Hello Debbie,.
Thanks for posting your query in Microsoft Community.
I understand that you have problems with the teredo tunneling adapter.
But I would like to know some information to help you better.
(1) don't you make changes before this problem?
In the meantime, please follow the following suggestions to solve the problem.
The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
One of the main causes for this is that the network adapter does not currently support this feature. You can download the latest driver / updating the driver for your network card or chipset and then try to uninstall and reinstall this component.
Method 1: first of all, try to follow the steps mentioned in the link below and see if that helps.
FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
http://support.Microsoft.com/kb/943104/en-us
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Registry backup
http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7Additional information:
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN
Tips for solving common driver problems
I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.
Thank you
-
Problems with Microsoft Tun Miniport Adapter #2 error (code 10)
The difficulty to stay connected to internet connected then disconnected tried to download the new driver still having problem cant hook up directly to the modem. Don't know much about computers. Under the Advanced tab under ownership of what he says in virtue in white value network address. Is there something that belongs to it? And if so what happens at the end I put there. Under the general tab where it says place: unknown that is what belongs to it? I disabled it for now. Now I get the error code 22. He drives me to drink with all the problems I had. It's my laptop frist, it's one and a half years. What should I do? Help, please! Thank you. P.S. I am running VISTA HOME PREMIUM SERVICE PACK 2.
OJ1007,
Thank you for visiting the Microsoft Answers community forum.Disable IPv6:
Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.NOTE: You should do this for each network connection.
To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
http://support.Microsoft.com/kb/299357Let us know if this does not solve your problem.
Thank youGloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
#2 Microsoft Tun Miniport Adapter? Error code 10
Hello guys! I couldn't connect to internet from my desktop computer. I found this error message for the Microsoft Tun Miniport «»
Adapter 2 # "describing that the driver could not start. (Error code 10)
I tried uninstalling the driver and then update but failed...
I have a Windows Vista 32 bit and the model is SR5703WM
Any help would be really appreciated :D
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104Hardware devices not detected or does not
http://support.Microsoft.com/GP/hardware_device_problemsIf the steps above fail I would say that you uninstall the network card and later visit the network adapter manufacturer's Web site and download and install the latest drivers for it and check that it works.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyOr Gloria solution try found here
-
Teredo tunneling device driver
I get a message that my Teredo tunneling has a device driver problem (probably spelled wrong Teredo) when windows tries to download driver it fails! (nothing seems to be a problem with the operation of my computer other than the above message? help or explanation would be greatly appreciated!) Thank you... Gary
Gary
Care to tell us what the underlying problem? Why do you think you have need of tunneling as it is only used primarily for printers?
It is a known problem if you have Zone alarm installed. If you have installed remove it at least to checkTo disable Teredo tunneling 6to4 interface open an elevated command prompt and type
netsh interface set terredo disabled state.To re - install- Click on start.
- Type Device Manager in the start search box, and then open it.
- Click the Action tab on top and click Add legacy hardware
then click next and next again, he will then scan and find nothing then click on the screen after that.
Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
If there is no option "Add Hardware inherited", you need to connect the unit using the tunneling.
Maybe you are looking for
-
How to put back the Documents folder in Finders?
I accidentally slicked and swipped the 'Documents' on the right in Finders folder and it disappeared. How can hand the Document folder in finders?
-
No link between the Satellite C660, Lexmark X 4650
After monthe of perfect operation, my Satellite C660 and Lexmark X 4650 have suddenly stopped communicating, so I can't print over Wi - Fi (usual) or USB cable. There is an ongoing dialogue on what the laptop recognizes the printer on the network, bu
-
my hp compaq 615 notebook pc does not start up and refused to start... How do I please you?
-
How do I change the language of Hebrew to English from Windows XP?
I have a PC running Windows Professional CP. The operating system and the feature has been initially implemented for Hebrew. I would change to Enhlish. How can I do this?
-
Hi, I hope that my problem can be solved here. I have laptop ASUS. My operating system is windows 7. It starts and crashes. And I also tried to start in safe mode, but it didn't work. Start windows and after the windows logo appears and it freezes an