Microsoft applicant system unknown device error

Similar Questions

• Microsoft Kernel System Audio Device fails

  I can't get my sound to work. There is a yellow (!) in the sound, video and game controllers drop-down tree the file listed as "unknown device" when I try to reinstall the driver The Microsoft Kernel System Audio Device fails. Can anyone help?

  The place where you install the drivers from... Whatever it is, the BIOS is configured to use

  integrated audio device or sound card... Once set, real-tek on board equipment

  requires the software either specifically for its hardware, go to real tek for it. If this is a sound card

  Try, http://download.cnet.com/windows/

  Drivers/software...

• HP Pavilion all-in-one 200 pc: unknown device error

  Hello

  I can't update all devices, the following problem

  unknown device error.

  Hardware ID are:

  ACPI\TE8715

  * ITE8715

  Location on Intel ICH10 LPC Interface Controller 3 a 18

  unknown deloper, no driver available!

  Thanks for the tips.

  Hello:

  This is your ITE CIR receiver.

  Unfortunately, I do not know where you can find a W7 driver for it.

  Try Windows Update of the device - automatic driver search.  Be connected to the internet.

  Description of the model you posted draws upward of way too many models for me determine which one you actually.

• I can't install Windows updates security for Microsoft Office System 2007: 646 error Code

  I can not install the following Windows updates:
  Update for Microsoft Office System 2007 security:

  Update of security for Microsoft Office Excel 2007 (KB982308)
  Update of security for Microsoft Office InfoPath 2007 (KB979441)
  Update of security for Microsoft Office PowerPoint 2007 (KB982158)
  Update of security for Microsoft Office Word 2007 (KB982135)
  Update of security for Microsoft Office System 2007 (KB982312)
  Update of security for Microsoft Office System 2007 (KB982331)

  I get the error code 646.  If someone could help me, I would appreciate it.

  Hello

  Here's what I recommend you do:

  1. disable UAC (do this if you are using Vista or Windows 7, otherwise, go to step # 2). Comes down

  restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications (such as MS Word, MS Excel, etc.).
  6. follow steps 3-4.
  7. If it still does not work, follow step # 3 again. After you download it, try unplugging your computer from

  Internet (unplug the internet cable or turn off the modem). Then, try to install the downloaded file

  (KB982331). It should work this time.

  Do the same for all the updates that come with KB982331, IF ANY.
  Let me know your results.

  WARNING: This is only a WORKAROUND and not a RESOLUTION. The resolution is displayed as soon as we have it.

• Unknown device (error Code 28)

  After you have reinstalled MS Vista Home Premium (on a HP dv5 Notebook), I see that there is only a "other device" listed in Device Manager. This "unknown device" also appears on the 'Network' icon on the desktop screen. Material is listed in the Manager of devices as follows:

  ACPI\ENE0100

  * ENE0100

  I hope that someone on the forum has seen this before and can help me solve the problem. Many thanks in advance!

  You must install the ENE CIR Receiver driver.

  For the HP DV5, this should work: http://ftp.hp.com/pub/softpaq/sp41501-42000/sp41705.exe

• Microsoft's Teredo tunneling device error Code 10

  I have an error against the peripheral Microsoft tunnelling teredo (does not start Code 10). I tried the update driver software option, but the computer has an error in the installation of the driver. I checked for Zone Alarm programs, but I don't have them on my PC. I use Windows 7 64-bit OS.

  I tried the fix described REGEDIT too, but I don't have any "Disabled components" in the pane right (as described in trouble).

  I have problems with my printer Epson Stylus Color 460 - is not printing. I tried several times to uninstall and reinstall the printer as well. I suspected all the stems of this problem with the piercing device driver. Could anyone help with any other suggestions? Thank you very much

  Hello, Gabriella,.

  Please keep us updated on the status of the issue.

  I'm sorry for the late reply. I appreciate your efforts to resolve the issue.

  For the printer problem, I suggest you try to install the printer driver in compatibility mode with Windows 7 and check if that helps.
  Please, use this link to download the printer driver.
  http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-GB&data=qBjAbS6NcI3HuZUJ4LNiQ3en9sCSaRpAhAAVlmxMhA4U003D&TC=6

  HOW to: Install a hardware device using the Compatibility Mode driver
  http://social.technet.Microsoft.com/forums/Windows/en-us/80cae5ee-dc98-4A2F-8284-a1ab826059b7/how-to-install-a-hardware-device-driver-using-compatibility-mode?Forum=w7itprohardware

  Device for Microsoft teredo tunneling, question I suggest you try using the steps described in Microsoft Knowledge base article.
  Reference:
  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
  http://support.Microsoft.com/kb/943104

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Thank you

• How to fix a device unknown device error 43 Manager.

  Instance of device USB\VID_0000 & PID_0000\5 & 5136EC5 & 0 & 4
  He belongs to, in my view a WebCam USB of DreamCheeky (in the form of a company)

  I tried FixIt, Windows Update, and update automatic pilot, as well as web search device DreamCheeky drivers.

  Hello

  The issue could be due to ports USB doesn't work is not on the computer. I suggest you run the hardware and devices Troubleshooter and see if that helps.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Additional information:
  Tips for solving problems with USB devices (applies to Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Unknown device in the device error 43 Manager

  I get a 43 unknown device error when I start Windows 7.  I tried every fix I found after ten days of research.  When Windows starts, and the notification is popping up that I can't use my keyboard are so difficult to do anything.  Finally, the message disappears (I don't know why) and I am able to type, or if I catch it just just between notifications.  At this time I started my computer in clean boot mode and no error message appears and the unknown device is not USB device controllers manager.

  What, in my view, that has happened, is that I used to have an LG phone and the software on the computer.  I now have a new phone, Samsung, that I just connected to the same port on the front of the computer.  The Samsung worked, but did not ask me to install the software, then must have run out of the LG.  I deleted the software from LG and then reconnected the Samsung and got the prompt to download the correct software.  I then plugged a generic USB hub device in order to use the phone and any other device that I could plug in (none at this time and I even unplugged the generic hub).

  Now I get the unknown device.  Some fix told me he didn't need a driver, but Windows keeps load a generic driver and so the message repeats the process over and over again.

  Unknown error seems to be a common problem, probably a fix is available from Microsoft.

  Any help would be appreciated more because it drives me crazy!

  Thanks for your reply, Al-Shabaab.  In fact, I solved the problem.

  I deleted all the Verizon and Samsung software on my computer.  When doing this, I noticed that my keyboard has gradually deteriorated (failed to start in safe mode F8 key would not work).

  I bought a new keyboard... and EUREKA!  Problem disappeared!  Then I rebooted my phone software and have had no problems since.  I guess it was a coincidence that the keyboard was dying as I tried to connect my phone to my computer leading me on a GOOSE Chase that was long, difficult and extremely frustrating!

  I appreciate the help and I hope this will help others.

• "" Unknown device is error message "is not a driver" when you run Microsoft Fixit Center

  Original title: driver problem

  When microsoft fixit center running, I get a message that says ' unknown device is not a driver.  What should I do?

  Hello Stephanie,.

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it seems that you are having problems with Microsoft Fixit Center. "As I understand it, you get an error message" unknown device is not a driver.

  I need to ask you some questions to help you better.

  1. why you use Microsoft Fixit Center?

  2 do you have connected a device to the computer apart from keyboard and mouse?

  Reply with answers to help you in a better way.

• Unknown device with location "on system compatible ACPI Microsoft"

  I have an unknown device with location "on system compatible ACPI Microsoft". Under the hardware ID, its value reads "ACPI\INT33A0".

  I have an ASRock H77 Pro4/MVP, a Zotac GeForce GTX 670, an Intel I7 3770, team Vulcan 16 GB (4 x 4 GB) 240-pin DDR3 1600 SDRAM and a SSD MLC of Mushkin Chronos SATA 3. All the these are listed in the devices, with the exception of the memory manager, of course. In addition, all these should have already installed the drivers, but I could be wrong somehow.
  Anyone know what is the device? Where can I get the drivers for it? And what to do?
  Thank you very much!

  Hello

  I hope that my answer is not too late. But I ran into the same problem today. The unknown device is part of the Intel Smart Connect technology. If you do not need just disable it in the BIOS/UEFI Governing Council.

• HP compaq 6730 b: unknown device on pci-bus code 28 / unknown device on Microsoft ACPI-Complia... (ACPI\HPQ0006)

  Win.7 bit 64 pro HP 6730 b

  Unknown device on Microsoft ACPI-compliant system code 28

  Unknown device on pci-bus code 28

  Hello:

  You need the driver for this device...

  This package contains the software that allows the HP Quick Launch Buttons, which are special function keys on HP laptops. This software works with the notebook models that are running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49104.exe

• Windows Update, error: 80070641, Security Update for Microsoft Office system 2007: 2289158 KB

  I had some trouble installing the above update (security for 2007 Microsoft Office system update: KB 2289158). When the update fails, the error I get says:

  Code 80070641 Windows update encountered an unknown error

  When I click on the link below the error that says "get help with this error, a Windows Help and Support window opens with this in the search box:

  "WindowsUpdate_80070641" "WindowsUpdate_dt000"

  I did some research and it seems that this error indicates a problem with the installer, but I tried several proposed fixes and none of them work.  Defective patches include:

  -modification of the parameters of service by Windows install to start automatically and then start it manually, and then try to update

  -With the help of the (Administrator) command prompt to manually start windows update, and then try to update

  -Use of the (Administrator) command prompt to manually stop the windows update, then try to update

  -With the help of the (Administrator) command prompt manually update windows, then rename the files that have been damaged (sorry, I don't know more than what files), and then try to update

  -Disable UAC, then try to update

  -Use of the Download Center Microsoft to download the specific update and try to install.

  What's weird, is that it is the only update with the problem, I can and have installed every update that was shown to me.  Recently manually, I started Setup of windows with the command prompt, then run the update. Later, I tried to stop the service and restart, but the service was already stopped. It seems that the installation of windows service is stopped during the update.

  I'm running a Windows Vista x 86 machine.

  Any help will be appreciated.

  You receive one or more of the following error messages:
  http://support.Microsoft.com/kb/818018/en-us#appliesTo

• iPod touch installs as an unknown device, gives 43 error code

  ORIGINAL TITLE: Hi, need help!

  I have an ipod touch and recently my computer windows vista installs it as an unknown device. Then, the computer gives me code error 43 and USB\VID_0000 & PID_0000\5 & 2010C5D6 & 1 & 3 How to fix? He also says that my camera is faulty so how can I found out if its my ipod which is really broken because it works fine for me. I searched but nothing seems to answer my questions directly. Help, please!

  Hello

  Check with iPod Support and Forums for more information if necessary.

  -IPod support
  http://www.Apple.com/support/iPod/

  iTunes and iPod Support
  http://www.Apple.com/support/

  Each iPod - iPod help & Technical Support (part 3)
  http://www.EveryiPod.com/iPod-help/index.html

  ---------------------------------------------------------------------

  For most MP3 players that can and will be able to be synced to WMP - iPod syncs not natively for Windows 7.

  Set the MP3 MTP Mode for WMP sync - mode MSC to treat the MP3 as a reader.
  (Now its set to MSC)<-- this="" is="" for="" mp3="" in="" general="" and="" ipod="" will="" not="" usually="">

  Your MP3 player should have 2 settings - MSC which should allow the player to be used as an external drive
  and PSG that is the parameter to use to sync with WMP. Remove the MP3 and restart the computer.
  Change the MP3 in MTP mode - it power off and plug it in.

  ======================================

  There is a plugin to let WMP sync music to an iPod:
  http://thewelltemperedcomputer.com/SW/WMP/sync.htm.------

  WinAmp supports iPod
  http://www.Winamp.com/

  How to use Winamp to manage your iPod
  http://www.SimpleHelp.NET/2007/07/07/how-to-use-Winamp-to-manage-your-iPod/

  WinAmp - Forums
  http://forums.Winamp.com/

  6 ways to synchronize your iPod to computer without iTunes
  http://www.MakeUseOf.com/tag/6-ways-sync-iPod-computer-iTunes/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• USB does not recognize the Garmin unit. Error "unknown device".

  Recently, addition of windows 7 Home premium stopped detecting my garmin unit. Other USB devices such as my ipod work very well. I was able to detect the Garmin only a few times, he would try to install the drivers, but the drivers would not install. The garmin was working a few weeks ago. Here is a list of what I've tried:

  1. Reset (after all what I try)
  2. Turn off the computer and leave it unplugged overnight
  3. Completely uninstall all the drivers and the software associated with the kid.
  4. manual installation of drivers
  5. uninstall the unknown device and search for new hardware
  6. uninstall the unknown device and do a search for legacy hardware (which produces a device does not not (Code 10) error)
  7. Go back to a restore point before updating the last windows

  Please, any help would be much appreciated. I'm decently computer savvy and have always been able to solve any problems that I have. This one had turn me my wheels for days.

  Thank you
  L

  Hello

  Try to connect to your garmin unit on another computer in Windows 7 and check if it is recognized.

  See this article to fix the error code 10:

  http://support.Microsoft.com/kb/943104/

  You can also post this question to the garmin forums to get help.

  https://forums.Garmin.com/

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP probook 6570b: 6570b hp Base system device and unknown device

  I have hp 6570b with os win 7 Professional 32 bit.it appear in Device Manager that there is a need driver software.it shoes Base system unit hardware and unknown device...

  Hardware ID base system device

  PCI\VEN_197B & DEV_2392 & SUBSYS_17AB103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_17AB103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  Unknown device hardware ID

  ACPI\HPQ6000
  * HPQ6000

  Hello

  Should be below card reader driver.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212928 & swItemId = ob_115197_1 & lang = to & CC = US

  And HP 3D DriveGuard on the following link.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212928 & swItemId = ob_110813_1 & lang = to & CC = US

  Kind regards

  DP - K