Unknown device on Satellite L40-139

Similar Questions

• Need hardware drivers WXP for Satellite L40-139

  Hello!

  It seems that there is no XP drivers available for Satellite L40-139.
  Is could someone please tell me where I can download drivers for the following devices:

  -Satellite L40-139
  -Audio equipment
  -Graphics controller
  Controller - ACPI!
  -Some chipset drivers (?) (Subsystem PCI or something)

  I would really appreciate any help!

  Kind regards!

  Hello

  There are no drivers of toshiba for the moment, but you can try to use the generic drivers from the manufacturers of the equipment
  (for example if the soundhardware is a realtek sound card download then www.realtek.com drivers and so on..) and operate the machine with these drivers.

  Here is a link that might help you:

  Video drivers
  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  Chipset drivers

  http://www.Intel.com

  Audio drivers

  http://www.Realtek.com

  I hope that you can find the drivers you need...

  Welcome them

• Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

  I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
  In the device manager says code 10 DEVICE can NOT START.

  Help, please!

  Thank you!

  Hello

  If you read here:

  http://support.Microsoft.com/kb/943104

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
  Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

  Welcome them

• Audio drivers for Satellite L40-139

  SOS,
  For the last 3 weeks I'm searching the Internet to find:

  * Sound drivers for toshiba Satellite L40-139 *.
  Toshiba even does not have.

  CAN someone HELP Sound drivers for toshiba Satellite L40-139 please.

  Thank you

  Hello

  Are you sure that Toshiba does not provide drivers for this laptop model?
  I think you are wrong buddy.

  Have you checked the Archive box on the European driver Toshiba page?
  I found the series Satellite L40 PSL40E and L40-139 belongs to this series

  There are all the drivers for this device

  It is interesting to check this new ;)

• Satellite L40-139: new graphics driver is causing the problem after waking from sleep

  I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.

  In the last days I've updated the software and drivers from the Microsoft Update web site.

  Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 7.14.10.1350, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.

  Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 7.14.10.1350 version) has caused many other problems on a variety of hardware and software platforms.

  Does anyone have a definitive solution for Satellite L40?

  I looked at four options.

  1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.

  2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.

  3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 7.14.10.1280 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.

  4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.

  Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?

  Hello Peter

  If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.

  I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.

  Please post the result.

• Satellite L40 - 139 - after watching the video, I can't use the virtual scrolling

  Hello

  I own a Toshiba Satellite L40-139 under Windows Vista 32-bit. However, I think that this problem only applies to this model as other users are experiencing the same thing.

  I often watch videos online mode full screen (like on YouTube), but when I leave full-screen mode, I noticed that virtual scrolling stops working on the touchpad. This occurs in the latest versions of Internet Explorer and Firefox. I can still move the pointer, but cannot scroll. I also note that the icon in the taskbar freezes, because it does not meet all the movements on the touchpad. I have the latest version of the driver installed (10.0.3.0).

  Is it possible for Toshiba to issue an updated driver for the Synaptics pointing device which solves this problem?

  Thank you

  Hello

  It's the first time that someone has posted this question
  I checked this on my Satellite U400 and quest that; the touchpad works ok
  There may be a registry problem with your operating system who knows
  It would be interesting to know how the touchpad scroll function works by using the new OS installed

• Satellite L40-139 and Midi interface

  I have Satellite L40-139, which includes a SoundMax sound card (somewhere inside) and I would like to be able to use it as the basis for a music recording Midi put in place, but I can't get the computer to recognize the Phonic Midi to USB interface, I.

  The map SoundMax accepts data Midi and how can I do to make him recognize?

  Hello

  I put t know what you want to do exactly.
  Depending on your message that you try to connect an external 3rd device to the USB port. Am I wrong?
  How a sound chip should recognize this device? I was a little confused m

  However, I think that you should first check if this 3rd party device has been properly recognized and installed on the laptop. It is an essential condition if you want to use.

  PS; If you use the Vista operating system, you need to check if this 3rd party device supports Vista too!

• Satellite L40-139 - how to get WLAN to work?

  I installed XP on my Satellite L40-139 of a disc that was my companion. Now I am unable to get my wireless to work.

  Is it possible that I can get it work?

  Hello

  What else have you got? Have you installed the driver WLAN? You can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Also, make sure that your device is turned on. Therefore, to use the material and the FN + F9 key combination switch.

• Cannot run the CHKDSK - Satellite L40-139 process

  When I start my laptop (Toshiba Satellite L40-139) always starts to run chkdsk
  He completed the phase 1 and then when it is at 30% through stage 2 it just goes directly to the login screen.

  I was wondering if someone can help me correct what I want to start the whole process.

  Thanks in advance.

  Hello

  You can run chkdsk after Windows has started.
  Type in the CMD COMMAND.
  The console should open and there you can use the command * chkdsk *.

  That's all.

• Satellite L40-139 does not start

  ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

  Hello, I have a problem with the SATELLITE L40-139

  the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

  I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

  Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
  And viola! It works it boots etc.

  After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

  Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

  Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

  Maybe someone could help me fix without sending it to the customer service.

  See you soon.

  On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

  Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.

• Satellite L40 - 139 - I want to upgrade the RAM

  Hello
  My laptop is Toshiba Satellite L40 - 139 PSL40E model, operating system Windows XP SP3, 1 024 DDR2 RAM (667 MHz) (512 + 512).

  I want to increase the RAM memory using 2048 DDR2 RAM (1024 + 1024).

  Laptop manual can not find if support * _dual-channel memory_ *, which requires a dual-channel-capable motherboard. Theoretically, this technology double data rate of the memory.
  Someone has the manual for this laptop motheboard, or may indicate the site for download?

  Apologies for my bad English.
  Thank you.

  Hello!

  Satellite L40-139 can be upgraded to 2 GB of RAM. You can buy two modules with 1 GB of capacity with the specifications of DDR2 at 667 MHz.
  If you use two modules, they run in dual channel mode.

  The manual of the motherboard or repair for Toshiba laptops cannot be downloaded. They are only available if ASP.

  Good bye

• Last update of BIOS for Satellite L40-139 model PSL40E

  Hello

  I have laptop Satellite L40 - 139 model PSL40E, operating system Windows XP SP3.
  I want to now what is the latest Bios Update for my laptop, a shortcut for the download.
  Thank you.

  Update the BIOS for Windows XP Home edition is not available. Only for the portable Vista preinstalled.
  You have some problems with the feature?
  If everything works well the BIOS update should not be done.

• Cannot start XP installation on Vista Home Premium preinstalled Satellite L40-139

  Here's the problem:

  I bought a new Toshiba Satellite L40-139 in Austria and comes preinstalled Vista. OK, Vista is in German, and I don't know German. But I made a choice to learn German and to start using a Vista. After a month Vista drives me crazy (no language, just for Vista) and I want to just install XP. I didn't need something more.
  I spent more then five days trying to archive this, but without success and I am disappointed, much.

  I put aside all types of teaching and I did a lot of things, but none of them helped me.
  So the problem is like this:
  I made the partition for XP, so I have two partitions as: Vista (C), (D) XP and Datas (G) and my CD/DVD (E :).
  I activated just boot from the CD/DVD, but when I insert the CD and start the installation of Vista it tells me something like this:
  Press any key to boot from CD...
  When I do that, I get a message, which is very fast where it says something like that, (I'm not quiet sure what it says because it's fast):
  Checking your configuration...
  After that, nothing happens, don't know why, I just get black monitor and CD/DVD does not work anymore?

  It's driving crazy me and I can't install XP.
  It seems that does not recognize the CD/DVD, and I tried with several XP bootable CD/s and they work on my desk.

  Can someone help, please, because I'm going crazy?

  If you have installed XP on this notebook L40 Vista you need a BIOS update to the XP version. All that s

• Satellite L40-139 cannot boot from CD

  I have a Toshiba Satellite L40 - 139 that comes with vista installed!
  A month ago, I installed XP and it worked well!

  Yesterday I had to reinstal XP and I chose clean instal CD and an installation process, I pressed the button to open the dvd player and you finish her!

  Stupid mistake! From there if I try to boot Windows from a dvd player and the process stops at: check the configuration of your hardware! - and white screen!
  Nothing happens!
  What can I do?

  Evrything else seems to work ok!
  There is no problem with dvd player, because he reads a recovery for vista CD!
  Help, please!

  This is a really silly situation. I'm sure that this info on the suspended installation is recorded in the MBR. I recommend you do the drive clean HARD everything including MBR.

  After this try to reuse the CD of Windows XP Home edition installations.

  Good luck!

• Satellite L40-139 - need driver Windows XP Home edition for 'ethernet '.

  Please can you send me the link to Satellite L40 ethernet control model of laptop for Windows XP Home edition?

  Hello

  Satellite L40-139 belongs to the PSL40E series. Am I wrong?
  You can check the serial number of your laptop. It should be placed somewhere at the bottom of the unit. Check all labels.

  Anyway, the Toshiba driver European page doesn't provide XP drivers for this series at this time. Seems you have to wait a bit until all pilots to be released!

  For the only moment that two versions of the BIOS for L40 PSL40E if released.
  The BIOS must be updated to the XP version, if you want to use XP on this laptop.

  By the way; It seems that this series is supported by the Base map - TX Ethernet Realtek 10/100.
  Then you can try the LAN driver from the site Web of Realtek. Should also work.

  Good bye