Unknown Publisher .exe even mmc.exe
all the unknown Editor .exe, same mmc.exe or setup.exe
View your basic network information and configure unknown connection. The dependency service or group was able to start and the editor of unknown sharing setting advanced
Hello
Were there any changes made to the computer before the show?
Please follow the methods.
Method 1:
I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
Method 2:
Follow the steps in the link.
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756
Cannot open. Files EXE in Windows 7 or Windows Vista
http://support.Microsoft.com/kb/2688326
Reference:
When you open a file on a Windows-based computer, the file may start another program
http://support.Microsoft.com/kb/2656106
Tags: Windows
Similar Questions
-
I'm trying to run a system restore, and I have Windows 7. The problem started when Yahoo hacked my Google with Firefox search engine. I could not understand how to get my search engine to Google, so I tried to do a "system restore." I get a message from "user account control" who says: ' do you want to allow the program following an unknown Publisher to make changes to this computer: rstrui.exe Editor: unknown origin of the file: hard drive of this computer. " I think that rstrui.exe is actually the Windows program for the restoration of the system, but I don't think I should get a message like "Editor: unknown." I ran Malwarebytes Anti-Malware and Spybot, but came to nothing. If my system restore has been disabled?
Hello
This can help you, because these are a few reasons for problems with SR:
1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.
http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
AVG will cause problems with SR too.
«Temporarily disable AVG»
http://www.Avg.com/ww-en/FAQ.Num-3857
2. try to use Safe Mode system restore.
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
"Start your computer in safe mode.
See you soon.
-
Unknown 'explorer .exe-child' thing
So looks like, have an unknown 'explorer .exe-child' appear on my "taskmgr.exe", I do not know how got there or how to remove it. I can kill it with taskmgr, but she will be re-run after a few seconds to kill him with taskmgr. Only way they stop coming back form kills the main explorer.exe. If I don't kill it the RAM and the processor will also normal form with 100% in 30 years.
If needed, an image, I can take one of them.
If you can help so never useful.
Since then, I can't have a lot without the Explorer bar. and I won't have the CPU and RAM at most.
Also if this wrong place to put this problem then you can change it. the label didn't.
Yours truly:
TheMXG
(Moved to programs)
Hello
When you open a windows Explorer it will show that explorer.exe is the Task Manager. You mentioned that you see multiple instances of explorer.exe, you might face this problem because of any third-party application. I suggest that check you the issue in the State of clean boot of your computer and check if it helps. If you are not facing this problem to boot, it means you are facing this problem because of the third-party application.
To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: Please refer to the section: How to reset the computer to start normally after a boot minimum troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.
You can also click with the right button on each input in the Task Manager and click Open file location and check if it shows same place for all entries in the Task Manager.
Let us know the status of the issue.
-
UAC - alert "Unknown Publisher" with the programs Microsoft and system settings after FixIt 50202
I had some problems with the list of Windows Update or vacuum . Since a simple reboot did not help in my case, I searched and found FixIt 50202 - "How to reset the Windows Update components?"
I have run the fix as soon as some time ago and it solved the problem. However, the problem came back after a month or two, I decided to run again, this time in (OH!) in aggressive mode.
The problem has been resolved again, but after restart of UAC began to invite for each single action that requires elevation, even those who should fall under the "changes that I do" class. Officially my UAC settings have not changed, and I tried moving them around, restart and so on.
What I get for each single program or setting requiring an elevation is the UAC dialog box asking "do you want to allow the following program from a Unknown Publisher to make changes to this computer?
An example? The services, i.e. services.msc, no dialog as
Program name: mmc.exe
Publisher: unknown
Original file: hard drive on this computer
UAC or my system, lost the ability to recognize the signature of Microsoft? Any tweak registry to fix this?
Oh, I have no restore point before the FixIt...
I think I solved the problem :-)
Among the measures taken by FixIt 50202 there
- Rename the following files to *. BAK: [...] %systemroot%\system32\catroot2
For what I understand, this folder contains the catalogues of security installed on the system, including the signatures of files and com objects and certification info. Rename/delete then was not a choice safe and left me without signatures during most of the windows exectuables.
I tried these files on the Windows 7 DVD, and I could not find them. However, using 7zip I could browse through the archives install.wim on the dvd and extract the contents of the catroot2 directory. Copy this file to the cd did the trick:
C:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb
The file has been locked by encryption Services, so I had to stop the service, replace the file and restart the service.
I have still some files that appear as "Unsigned" using sigcheck *, which I suppose were not part of the initial installation. I hope that the problem will be resolved with future updates, but now think are working normally again.
[*] before, almost all the files in my System32 directory were "Unsigned"!
[edit] everything is now done: I copied a few .cat files Windows\WinSxS backup in the catroot\ {f....} directory, and who sets the signing of files last few!
-
Download error: Unknown Publisher / is not an application valid win 32
I can't download anything. My hijack this wont even work. Previous download exe. files do not work I get a
Download error: Unknown Publisher / is not an application valid win 32 I have Win xp. Firefox browser on a gateway netbook. No floppy drive or c/d.No location with AVG or Malewarebytes Virus. AVG update itself. Security Windows has done as well.
I was trying to Messenger from yahoo to d/l, then updating firefox. Nada.
Hello
· Were there any changes made on the computer before the show?
· Who is the service pack installed?
1. try to download files from Internet explore and check the results.
2. empty the Temp folder:
a. Click Start, point to programs, point to Accessories, point to system tools and then click on disk cleanup.
b. click C: or click the drive where Windows XP is installed and then click OK.
c. Click to select the temporary files check box.
d. click OK and then click Yes to confirm the deletion.
-
Request "unknown publisher wants to change" dell webcam "
EVERYTIME I STARTED MY PORTABLE, a DIALOG BOX USER ACCOUNT CONTROL APPEARS.IT REQUEST "do you want.
to allow the program from an unknown Publisher to make changes to this computer.NAME OF THE PROGRAM - WebCam2.exeEDITOR - unknownORIGINAL FILE - HARD DRIVEHello
(1) what is the operating system installed on your computer?(2) have you made no changes before this problem?(3) what is the brand and model of the laptop?Step 1: Safe Mode
I suggest to start the computer in safe mode and check if you have the same problem.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeIf the computer works fine in safe mode, and then follow step 2 and check.Step 2: Clean Boot Mode
I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to configure the computer to boot:
http://support.Microsoft.com/kb/929135
Note: After the troubleshooting steps, please refer to clean the start link to configure the computer to normal startup mode.Step 3: update the Webcam driversSee the manufacturer's Web site and try to install the updated drivers webcam in administrator mode.Driver downloads &In addition, see the below link for assistance.Update drivers: recommended linksHope this information helps. -
Impossible to download Vista SP2, "Unknown Publisher".
I have Vista SP1. Could someone help me please? I've been struggling with my phone for 3 weeks now. I restored to factory settings and the first thing tried to manually download SP2 from the Microsoft site. At the end of the download, I get this message:
"The file has been blocked because it doesn't have a valid digital signature." Unknown Publisher
If I save it, and then try to open it by 'Run as administrator', I find myself with ' Data is not valid.
Before you try to download it I updated Windows updates "check updates but let me choose whether to download and install them." There are 1 account, I am the administrator and there is no password set.Open a free support incident.
Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) won't fix this!
HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a local network (i.e. other computers) and before using a USB or SD card that is not brand new, or has not been freshly formattedotherwise:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxNB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeNB: There are updates prerequisite that MUST be installed before you can install the SP2 (or SP1). I wouldn't recommend trying to install Vista Service Pack, unless and until it is offered by Windows Update.
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
Good luck!
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Windows doesn't let me download an application from my library to the city. It is an application used to download their books. I have Vista Home Premium on my HP Pavilion.
I start the download, the process begins, and then a small dialog box opens saying "Unknown Publisher" and the choice of 'run' or 'Cancel '. I chose 'run', it seems it will continue then a little screen pops up saying "error reading setup initialization file." I "ve never had no problem download at this point.
For the same problem, I tried the following and still no luck:
I've got "pop-up blocker" turned off.
I disabled the "Inprivate filtering",
I turned off my "firewall" temprarilyAny other suggestions for this problem?
Thanks for your help!
Winifred_MHi Winifred_M,
Thanks for posting on the Forum of answers.
If you can provide a link to the application, we can try to recreate the issue.
Otherwise, it is perhaps a question that you should take with the Publisher of the software.However, you can try to use the Windows Installer CleanUp utility:
When you are working on your computer and install a new program, the installation suddenly fails. Now, you're left with a partly installed program. You try to install the program again, but you're unsuccessful. Or, maybe you have problems trying to remove an old program because the installation files are damaged.
Do not worry. Windows Installer CleanUp Utility may be able to help. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.
Download the Windows Installer CleanUp utilityWe have updated Windows Installer CleanUp Utility. This version of the Windows Installer CleanUp utility works correctly in all versions, 32-bit and 64-bit Microsoft Windows. If you have an earlier version installed on your computer, we recommend that you download and install this latest version.
You must be logged on to Windows with a user account is an administrator on the computer to run Windows Installer CleanUp Utility. For more information about how to install and run Windows Installer CleanUp Utility, see the section "more information".
You can download Windows Install CleanUp Utility starting from Microsoft Download Center:
Download the Windows Installer Cleanup Utility package now.
(http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe)Copied from http://support.microsoft.com/kb/290301
Please let us know if that helps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows says unknown Publisher and will not let me install the adobe upgrade.
Even after I disable McAfee. Says stpooed windows download because of the unknown Publisher. I ama allways get that or expired certificate or unknowm, etc.. Can't play farm town, get the Bank print or play scrabble. NEED to upgrade Adobe software why can't?
Hello
· You use internet explore for internet access?
· If so, what is the version of the same thing?
· What is the exact error message that you receive the certificate-related?
· What is the service pack installed?
You can try the steps proposed by Adobe and check if it helps. Link: Troubleshoot Flash Player installation | Windows: http://kb2.adobe.com/cps/191/tn_19166.html
I suggest you post your query in the adobe forum to improve assistance on the issue: http://forums.adobe.com/community/webplayers/flash_player
-
trying to install silverlight but get message unknown Publisher
Unknown Publisher
Hello adeaguiar,
Thanks for posting on the Microsoft answers Forum.
Make sure that you install from the site of Microsoft Silverlight Web listed here.
The latest version of Silverlight is a Silverlight 4 version 4.0.50401.0.There should be a signed version and should install successfully.
If you still have problems you can go on Internet Explorer and change some settings for the unsigned Editor.
Go to IE, tools, internet options. Then click on the Advanced tab uncheck 'Allow the software to install even if the signature is not valid.' and uncheck the "Check for signatures on downloaded software." Then restart IE. Try again to install Silverlight. If it is installed correctly, go back and check you the boxes unchecked and restart IE.Alan that it helps.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Downloading from the Internet - unknown Publisher error message
Hello
I have problems when I download from the internet, I get an unknown Publisher saying the error message windows, my internet pages show also error on the page, a part of the page is missing or it's full of garbage. This happens only for the last few days, but it is appears on each download, I tried to restore, but it goes back in only 5 days.Help, this is really frustrating.
Thank you
ChrisHello
AFAIK, you can disable this Panel-online internet options. Did you check that?
But my personal opinion is that Firefox would be the best ;)
-
How can I allow installation archives unknown Publisher
Tengo wont jdownloader y al try abrirlo me appears a mrnsaje than NSN's can run for being unknown Publisher
Como hago para no Permite abrirloHelloPlease select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:Thank you -
Impossible to download anything, message from unknown Publisher
whenever I try to download anything, I click on 'run '. It starts to download, through the progress bar, it and then "Unknown Publisher" appears. Click on "Run" and the download stops. I recently installed a regestry clean program "regestry mechinic" and he ran. could it have made my ability to download. If so, is it possible to fix. Thanks for any help that might be out there.
Running a registry cleaner can be very dangerous, and Yes, that could cause problems. You can restore the registry from the backup that you made before using the vacuum cleaner. If you do not have a backup, reinstall Windows.
-
Unknown Publisher, no digital certificate valid when you try to download iTunes on Apple site
Hello
I can't install itunes from the apple website. Windows detects an error message Unknown Publisher 'digital certificates valid'.
I have a Windows xp service pack 3 and internet explorer 8.
Can you please provide instructions and the resolution of this problem of Windows.
Concerning
Peter
Hello
1. are you able to install other programs through Internet explore?
2. what version of iTunes you trying to install?
Method 1: Problems installing and uninstalling programs on Windowshttp://support.microsoft.com/kb/2438651 computers
Method 2: Problem installing iTunes or QuickTime for Windows: http://support.apple.com/kb/ht1926
Hope this information is useful.
-
I tried to connect my iphone to my itunes library. Having trouble then uninstalled everything and I tried to reinstall - kept getting the above error messages. Don't know what else to do. Someone suggested below my security setting that I did but still the same error message when downloading. The process and looks like it is downloading but at the end, said the error message.
Check out these links:
http://www.SevenForums.com/system-security/3686-UAC-unknown-Publisher.html
Maybe you are looking for
-
Firefox does not connect to any site since the new update to download.
Firefox does not connect to all websites since the installation of the last update. Google Chrome and Internet work.
-
C870-121 satellite recovery disk does not work?
Hello... I have a weird problem, I bought the computer 6 months ago and have been happy with it, but I'm protected by a kind of virus and all the operating system has been * ed big time, so yesterday I want to da a factory install with recovery disks
-
I dropped my iPhone 4S and now the touchscreen does not work. Is there a way I can fix it without having to buy another or should I buy another? (my screen is cracked)
-
Hey all, even once, I need your help in my application, a long time ago, that I use a second Panel next to the main panel. If I reduce the main panel / second, while the other is visible, I can never load it up, it's like the icon in the task bar onl
-
Need help to convert the trial version of first 13 items
I have a trial version of Adobe Premiere elements 13 and now have purchased the full version. I have receied the order confirmation by email with serial number. When I enter the serial number in the trial version that I got the answer that it is not