Unload the loader and continue on the timeline

Similar Questions

• Vista will not load and continually reboots, recovery disk does not start.

  I have a Dell with vista on it. Recently, it has automatically installed an update and now it does not load Windows at all. It goes to the screen where I have the opportunity to "start in safe mode" "safe mode with command promt", "last known good configuration" etc. and none of these work options (all start loading them upwards and then the computer restarts just itself).

  I tried to put in the cd of installation for vista, but it won't start. I changed the options in the BIOS so that it starts from the CD first, but then it just goes to another blue screen that says: there was some sort of system faliure, and the only option is to restart the computer.

  I also tried to connect an external dvd player to see if he was not playing the disc because of a defect in material, but the same thing happens.

  I also tried out the RAM and it put it back again (a single website suggested I try this).

  Nothing seems to work! And now, I am out of options and have no idea what to try next - help!

  http://support.Dell.com/

  If it does not start where install Recovery DVD from Dell, you will need to contact Dell at the above address.
  As you say, you have changed the boot on the appropriate drive order and still nothing

  It would seem that you have a deeper problem that just a straight reinstall the problem.

  See you soon. Mick Murphy - Microsoft partner

• Load and unload the swf file

  I am currently using AS2.

  I create a button instance named 'myBtn' and I want it to load the external swf "test2.swf" call all to unload the current swf file named "test1.swf" when you press on / release.

  that fact is I put the following code under mybtn:

  We (Press)

  {

  unloadMovie ("test1.swf");

  loadMovie ("test2.swf", 1);

  }

  the result was that the "test2.swf" was loaded successfully, but the "test1.swf" fail to unload.

  Any help is welcome

  AS2... Scope is your problem. When you are inside the function for delivery you tell the button you used to unload test1.swf of inside of this button (which it is not located in).

  You are probably using the root timeline, so I'll take a bet that it works:

  (press)

  {

  _root.loadMovie ("test2.swf");

  }

  If you want to follow the progress of loading between them, it is a bit more complex.

• Can we load and unload the files in the run time?

  Can we load and unload the files in the run time?

  For example, there are four files named 'test1.h & test1.c' and another series 'test2.h & test2.c' (I have attached as an attachment to this post).

  test1.h contains the code:

  int variable; variable declared as integer

  test1.c contains the code:

  variable = 1; variable a value assigned

  test1.h contains the code:

  char * variable. variable declared as string

  test1.c contains the code:

  variable = "EXAMPLE"; a string that is assigned to variable

  So here, in this case can I dynamically load / unload first & second group files so that the same variable "variable" name can be used as an integer and string? And if so, how to do?

  Hi pa1majeti,

  You cannot simply consider that some code is loaded into memory or not: all code in a compiled application is permanently in memory unless you divide your application into DLLs that you dynamically load if necessary and remove if is no longer necessary.

  But as I understand from your description, you're better given the amount of memory occupied by the data (i.e. the contents of the variables) rather than the code. If this is the case, your only option is to allocate memory for variables dynamically and free it after it has been used. Now, even if this option is useful if you are using large networks of data, there is little or no effect on the unique variables.

  A final Council, given the huge memory installed on modern computers, are you sure you really need that extra work? I mean, the dynamic allocation of memory involves some additional precautions in programming: check the errors on each function malloc or calloc, check that the pointer is valid before each use, freeing pointers before reassignment in order to avoid memory leaks and so forth, so a balance must always be sought between the memory and the difficulty in programming.

• After the reinstallation of Windows 7, it does not load and restarts continuously

  I recently formatted and reinstalled Windows 7 on my Sony Vaio PCG - 71913L LAPTOP however the operating system does not load and his bicycle at all times. From the time turned the first page initialization comes then it stops and restarts and continues to go through this cycle. Is there a soloution to this question

  Check your BIOS settings. Have you installed the drivers of Sony devices?

  Test your hard drive and memory.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no error then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Sony product support: http://esupport.sony.com/US/perl/contact-land.pl?mdltype_id=1, 72,70,24,66,9,26,5

  Sony device drivers: http://eSupport.Sony.com/en/VAIO

  Enter your model number or leave Sony scan and detect your model.

  If you have Windows 7 drivers then download to a folder on your hard drive and install all of them, starting with the mother/chipset, SATA, Firewire card drivers (1394), LAN, Audio, etc, and so on.

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For help to install windows 7 on your VAIO, you can contact the support team Vaio 1-888-476-6972 they will be more than happy to try to help.

  J W Stuart: http://www.pagestart.com

• Loading... tie up and unload the question

  Hello forum members:

  (1) I have a main movie that loads an external movie with this code:

  var loader: Loader = new Loader();

  Loader.Load (new URLRequest("lessons/lessona/lessona.swf'));

  addChild (loader);

  Loader.y = 0;

  var myTween:Tween = new Tween (charger, "x", Strong.easeIn, 1500, 0, 1, true);

  (2) the film loaded attach a movieclip from the library of movieclip loaded with this code:

  var mc:alert_mc = new alert_mc();

  MC.x = 320;

  MC.y = 210;

  addChild (mc);

  (3) against the home video clip I'm trying to remove the attached clip and the film loaded (and return to my main movie) with this code when the user clicks on yep_btn, but it is unsuccessful (he can't unload or go to my main movie)

  nope_btn.addEventListener (MouseEvent.CLICK, cancelunloadexitb);

  yep_btn.addEventListener (MouseEvent.CLICK, unloadexitb);

  function cancelunloadexitb(e:MouseEvent):void {}

  this.parent.removeChild (this);

  }

  function unloadexitb(e:MouseEvent):void {}

  Loader (this.parent) .unloadAndStop ();

  }

  How to return to my main movie? Any ideas... Thank you

  Draw the string to see where you are... If the buttons are in the attached clip from the library, then their parent is the clip, and parent.parent must be the swf of lessona. So, try something like this, until you derive the right object:

  function cancelunloadexitb(e:MouseEvent):void {}

  trace (parent);

  trace (parent.parent);

  etc.

  }

• How to load external swf file and unload the swf file parent?

  I have a question. Let's say I have file1.swf, file2.swf and file3.swf, how can I link this 3 files together.

  Let's assume that file1.swf is the main content file, but as I load file2.swf, I want the file1.swf get replaced by file2.swf. How could unload file1.swf at that time, so that my file2.swf will become the main content file?

  and even once, when my current post file2.swf and I want it get replaced by file3.swf tinkle of a button. so that i can unload the file2.swf and let them file3.swf become the main content file...
  Anyone have ideas on this?
  Thank you..

  If you're publishing to fp 10 + use:

  var loader: Loader = new Loader();

  var urlR:URLRequest = new URLRequest();

  addChild (loader);

  Btn1.addEventListener (MouseEvent.Click, f);

  btn2.addEventListener (MouseEvent.Click, f);

  function f(e:Event):void {}

  {if (Loader.Content)}

  loader.unloadAndStop ();

  }

  {if(e.currentTarget==btn1)}

  urlR.url = "file2.swf";

  } else {}

  urlR.url = "file3.swf";

  }

  Loader.Load (urlR);

  }

  p.s. Please check the useful/correct, if there is.

• With the help of a button to load and unload the external SWF in AS3?

  How can I use a button to load and unload a sequence of external SWF files, as a Next button and previous?

  I don't know if it will work because apparently you are trying to load a swf AS1/2, but try

  change the line to be...

  _swfTempClip = MovieClip (event.target.content);

  If this does not work, then you will need to create _swfTempClip as a new MovieClip and add the event.target.content to this MovieClip using addChild().

• Loading and unloading of the external swf with buttons

  Alright. Here's the deal. I have 7 buttons on my main page, on the left side of the screen. I want the buttons to the external swf on the right to load and unload then when you push a different button. Should I make a table? Do I need a clip vacuum film to load each swf in?

  ///////////////Buttons/////////////////////

  graphics - load the thumbnail scroll bar

  mixed technique - load the thumbnail scroll bar

  photography - load the thumbnail scroll bar

  illustration - charge the miniature scroll bar

  Words - list history of charges

  Contact - contact information of charges

  charges about - bio

  ////////////////////////////////////////////

  Thanks for any help.

  If you are unable to publish for flash player 10, you will need to use the instead of unloadAndStop() unload() method.

• Table and film loader affecting the timeline.

  I have a script to load a SWF into a video clip. This script is on the timeline of a movieclip which is then on the main timeline. This script is originally my movie to jump around the main storyline apparently randomly at different times.
  
  The tutorial I found parts of it in there on the main timeline, so I was wondering if the paths might be the cause of the problem.
  
  Thanks any help would be appreciated.

  you charge between 1 and 4 movieclips with your code according to k in each loop. If k is the same in all 4 loops, you will load a single. If k is different in each loop, you will load the 4 (but you will display only the last one).

  s randomly to load one of your swf, use:

• First elements 14 accidents system Win7 and acquires more than 8 GB of RAM when opening a project (48 clamps, 6 min on the timeline). Is there a solution?

  First elements acquires more than the 8 GB of RAM, I have in my computer, loading my project. Project contains 48 clips, the entire video has a length of about 6 min.

  It is often possible to kill ss14 and avoid a reboot of the system, but sometimes only a reboot can solve the lock.

  Sometimes the loading of the project does not exhaust the available RAM, and in these cases the continuation of the work with projects are possible without any RAM problems more (including rendering).

  Is there a solution?

  kirschnw

  What operating system is involved?

  What are the properties of these 48 clips (still images and video, just one or the other)?

  The complexity is the structure of the timeline, and what effects you apply for this clips - lots of reduction of stabilization?

  Are exhaust you the virtual as well as physical memory (RAM) in all of this?

  Please provide more details.

  Thank you.

  RTA

• When I try to play a game! all I get is "a debugger has been detected _ unload the debugger and try again.

  I did evry thing I can think and what's on the net
  CAN ANY 1 CAN HELP ME!

  Hi buddy300,
  Welcome to Microsoft windows vista forums!

  a. this happens only with games?

  b. remember that any changes made to your computer before this problem?
  Have c. you installed a software debugger on the computer?

  This problem may occur if one or more of the following conditions are met:

  ·         There are programs (for example, an antivirus program or debugging software) that run in the background and that interfere with the game startup process.

  ·          Your sound card or sound card drivers are outdated.

  ·         His Creative Audigy card is installed on your computer. This sound card may conflict with the game startup process.

  I suggest you do the following:

  Step 1: disable the security software on the system tray and then check.

  (Note: enable security software after the test)

  Step 2:

  Put the computer in a clean boot (namely if any third-party software hinders the process)

  http://support.Microsoft.com/kb/929135 ---> how to solve a problem by performing a clean boot in Windows Vista or in Windows 7

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  (Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)

  Step 3: try the steps mentioned in the article

  Games: Error Message: a debugger has been detected: unload the debugger and try again

  http://support.Microsoft.com/kb/812759

  Step 4: System Restore: -to restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose another restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem and then click Next.

  d. click Finish.

  e. the computer restarts and system files and settings are back to the State they were in at the time where the restore point has been created.

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to load the clip on the timeline without audio

  How to load a clip to the timeline without audio?

  Hello

  Open in the Source monitor, then click on and hold the video icon, drag the video only.

  

  Vinay

• How can I get the videos and stills to appear in the order early in the timeline, and not all images so all the videos. I chose the oldest Date

  Hi I have a mix of photos and video clips loaded into my Mac Adobe organizer of the external drive, where they show (on PC) in the correct order as, still images and videos mixed. After loading in the Organizer, and chronology in first 12 items, I select more "old first". But in the timeline, stills appear first in the correct order, then after that video clips, in the correct order in themselves. Is it possible to actually load everything in the right order, IE pictures and videos mixed. Thanks Chris

  Chris

  Thanks for the follow-up.

  Be strictly one of the Windows elements, I can not give you a 100% guarantee for the use of the organizing elements Mac Albums to get your first items editor Timeline ordering media, but what I've read, the chances are good for working on the item Organizer organizing Mac as well as windows.

  We will review your progress as your schedule allows.

  Best wishes

  RTA

• load stills in the timeline to effect time

  You're wondering how to load a folder of still images, in sequence, in the timeline,.3 s each, for a time-lapse effect.

  Anyone for advice thanks!

  Do you want the record to last 3 seconds or every again? 3 sec for each frame is very long.

  Timelaps is done usually by importing images as a seqeuence image.

  Make sure that the stills are sequentual.

  Always select the first

  Check the image sequence and click OK.

  All images will be a clip with each image with a duration of 1 image.