Unlock the BIOS of the advanced features.

Similar Questions

• Want to m6: unlock the Advanced Options in Bios Insyde F.36 tab

  Hi I need advanced access tab ptions in f.36 insyde bios but I don't know how to activate this tab. Can someone tell me how to do?

  Thank you!

  HP consumer notebooks do not have this ability, only is to hack the bios file and reflash the cmos, it is very dangerous and may stop brick of the PC, now it can only be used for a door.

• Satellite A665-147 - how to unlock the BIOS option?

  Hello

  I have an A665-147, and I want to change the cpu voltage and other things to improve my battery life.
  But in the BIOS, you can do nothing. I remember my old PC that you could unlock the Advanced mode by pressing alt + F1.

  Could someone help me?
  I'm sorry for my English french

  Sorry but there is no help. These options of don t exist in the BIOS.
  If you want to improve the battery life you must reduce energy consumption.
  To that effect, Toshiba has designed eco-utility.

  Using this utility, you can use laptop with little longer than usual battery power supply.

• HP mini 110 c: Hi, please help unlock the password of bios compaq mini 110 c.

  Hi, please help unlock the password of bios compaq mini 110 c.

  fatal error system stopped

  CNU93133K2

  Hello

  Enter: e9lof3ffs7 (3rd charater is a lowercase L)

  Kind regards

  DP - K

• How to access the advanced settings of the BIOS?

  Hi I have a computer laptop sony vaio SVE14125CLB BIOS insydeH20 Rev 3.7

  When you get into the BIOS I have just a few options and I need to access the advanced settings I know they exist but are locked somehow. How can I access them?

  are there any special combination key?

  It's really a pain for not having access to something you have paid...

  Thank you

  Hello

  It is hidden so that changes cannot be made that could affect how it interacts with the computer and possibly cause a problem in the future. What type of problem are you having with your VAIO which requires to enter BIOS advanced settings? Thank you.

• HPE-210y; trying to get into the advanced settings of the bios to change the setting of the fan

  Hello

  Model # HPE - 210Y

  Product # BK170AA-ABA

  BUILD with ID AINAv6PRA6

  CARD MOTHER-HRS880-ΜATX

  BIOS VERSION 5.09 22/01/10

  BASIC 08.00.15 VERSION

  I have a small problem when I start my computer it gives me an error: System fan has failed. Press F2

  Well my system fan works very well done any tests on old tried on slow corners fan connector

  another connector revved at full speed. I reset CMOS changes that the battery took all the memory, video card

  and everything cleaned with air. the usual steps.

  I asked around and technicians say the problem could be in the bios settings of fan cpu (quiet mode). Everyone says

  Press f1 or f10 to get into the bios Setup. go to the Advanced tab and scroll down. but for the life of me I can't find it. I know my computer if it is safe, but it's a pain to have to press f2, whenever the computer must restart

  If anyone can help pleaseeeeee

  Thank you

  Hello

  lonee37 wrote:

  Hello

  first of all thanks for the suggestion about the Nice program trying to core temp

  I replaced the temp of problem system always the same fan has not gone above 73 F

  so I guess I'll have to talk to HP to get it solved

  

  Thank you once again for youy help

  Thaose temperatures very well. Does not even begin to worry until you start to see time @140 degrees F.

  That's well below Tj Max.

  I used to use centigrade. If the temperature is close to that you certainly can't expect much better than this.

  Best regards
  ERICO

• before you go swim with my series 2. I need to activate the waterlock feature? or is it automatic? and just to unlock after swimming

  TNX

  Hello

  Swimming workouts

  Begin a swim practice in the application of the workout on Apple Watch series 2 models automatically activates the lock of the water, which locks the screen to avoid accidental interactions during your workout.

  To complete your workout and to evacuate all the water:

  • Press the digital Crown and side button at the same time (which makes a break from the workout).
  • Turn the digital Crown, which opens the screen and erases all the water inside of the watch (it can make a sound).
  • Forehand and press end.

  Other swimming

  If you plan to get your Apple Watch series 2 wet in other circumstances that when training of swimming - as to the course of General wear in a pool - you can manually lock the screen first and then drain the water from the speaker subsequently:

  • Slide up from the bottom of the face of the watch to open Control Center > tap water from lock to lock the screen.
  • When you're done: turn the digital Crown to unlock the screen and drained the water from the speaker.
  • The lock can also be unexpected water activated and unlocked immediately after exposure to the water.

  After bathing, make sure to clean your Apple Watch series 2 by rinsing them with hot water from the tap. Watch and the band should be dried with a non abrasive and non fluffy cloth.

  Strips of leather and stainless steel (Milanese Loop and Bracelet links) are not water resistant, so should not be worn when swimming.

  More information:

  Work with your Apple Watch - Apple Support

  On the resistance to water Apple Watch - Apple Support

  https://help.Apple.com/watch/#/apd707b42a5e

• Why don't unlock the lock screen?

  I know this is a long post, but I would be very happy if anyone with time on their hands to read.

  My computer works well and has had no virus since I installed windows8 (a few months ago), but today, he worked, and I rebooted, then the keyboard and mouse would not unlock the screen no matter what I do! Normally, when I click or press a key, the screen will slide up and he asked me my password, but now, it won't work.

  I tried different mouse and keyboards and all confirmed working on different machines. My work of mouse and keyboard in my bios and windows 8 s shift f8 mode. I tried different ports. I tried to unplug all USB ports and then plug on the lockscreen. I managed mode shift f8 and tried several options. Safe mode produces the same result. I tried to system restore but it gives me an error report something to do with my antivirus avira. After a Google search I found avira secure systems can't do system restored until avira is uninstalled, which I just can't do it right now.

  While in the lockscreen, I have several signs that the system is not completely frozen. The changes of time. When I unplug my USB WiFi adapter, the icon changes to WiFi and it changes back when I plug it back in. Initially, my keyboard volume knob does nothing but after spamming all the buttons, turn the volume change the volume, as indicated by the meter of volume of windows 8.

  Please help, I need to use my computer! I would prefer not to have to restore it because I don't want to lose a 2 TB of HDD to a value of things. I either need to find a way to uninstall avira has no access to windows and you try and the restoration of the system, or find a solution to the question itself.

  I tried to follow an online guide on how to uninstall programs with cmd, but it failed. I typed in wmic and that the command was successful, the next step was to type in product of is name, but who gave me an error code and it said invalid class. After some research, I discovered that x 64 systems do not come with preinstalled WMI command-line, but I can't install it without access to windows.

  Data sheet:

  Windows 8 x 64 professional
  12 GB Kingston hyperx 1600 MHz ram
  Stock of amd phenom ii x 6 1050t 2.8 GHz cpu
  And gigabyte 6850 GPUs
  ASUS m4a89gtd pro/usb3
  Microsoft sidewinder keyboard
  Logitech m500 mouse
  Alfa awus036h wireless adapter

  Thanks in advance.

  Edit: PS in safe mode, the lock screen is a reason ignored. He starts the password entry screen but the mouse is nowhere to be seen and the keyboard does nothing. The thing hits line of flashes.

  I would like to do a refresh of the system but need an installation disc and I've never had a physical disk, I downloaded an upgrade for windows 7.

  If you get to the real computer login screen, then you have a different problem that speaks of cheezstik .

  For your particular case, if you can not connect, here are your options: cmdrkeene.com/reset-windows-password forgotten

  PS. the icon with the Red Cross means that you are not connected to a WiFi now.  It's nothing to worry and normal.

• Unlock the Mac with Apple iWatch

  I have a MacBook to 2015 and iWatch. The Mac is on MacOS Sierra and the iWatch is on version 3, so both devices are on the latest version of the software. I also have an iPhone on the latest IOS that the watch is twinned with 6. All devices are on the same iCloud account.

  I tried everything I can do the iWatch unlock the Mac. I'm getting very fed upwards with it's complicated. I spent 2 step 2-factor authentication audit and I read each thread and an article I can find, but I can't get it to work. It seems I'm not the only one. I thought that Apple was easy to work, but with each update and the new feature which is launched, it becomes more complicated.

  I spent hours trying to work and decided that he would save me more type my password every time I have unlock the mac it takes to implement this feature from time to time saving!

  In any case, after trying everything I always get the message "your Mac was unable to communicate with your Apple Watch."

  

  If anyone can help I would really appreciate. Otherwise, I will ditch the idea to get this feature to work.

  Thank you Apple lovers.

  Try these similar thematic subjects - Impossible to unlock MacBook Pro with Apple Watch OR your Mac was unable to communicate with your Apple Watch OR your Mac was unable to communicate with your Apple Watch

  Allow automatic on your Mac and Apple Watch unlock OR similar link

• "The drive where windows is installed is locked. Unlock the drive, and then try again. »

  Have a laptop Envy M6-K010DX. Due to a problem of the internet while improving to win 8 to 8.1, the PC does not start correctly, and Windows Explorer will not load. Has decided to "Refresh" of the operating system and is gone to F11 restore utilities. When I go to the utility of refreshment and follow the prompts that I reach a message that says, 'the drive where windows is installed is locked. Unlock the drive, and then try again. "I was looking for support for the unlocking instructions and apart from some commands bootrec (which did not work - probably because I don't have a Win 8 disc) not much is available.

  The only access I have for execution of orders made by the tasks Manager command-line and F11. What is this 'locked' drive, anyway? Someone at - it any information on that?

  Hello Lara.

  IF you have updated from 8 to 8.1 and the process was interrupted during installation, this may damage the disc and therefore locked error. "Refreshing" the system would not be the answer that you need to clean install Windows 8 again. 8.1 update can break the bond of the recovery partition, especially if it has become corrupted as indicated.

  You must clean up the installation with the recovery discs, you must have created before you updated to 8.1.

  In addition, if you do not have the recovery disks, you can buy a set of HP or install a regular copy of Windows 8 and then update the drivers manually. HP has the Windows key now integrated into the bios.

  This forum is used on a voluntary basis and is not maintained by the HP Support for substitution of contact.

  Your message looks like not it was even 24 hours old before you decided to delete it from the original computer?

  I'm sorry to hear you had to do this.

  If you need to HP support, you must contact them directly to your country or region.

  Contact HP-Assist phone USA | HP® official site

  Contact HP worldwide | HP® official site

  Good luck with the new computer.

  Any brand or model you purchased now, don't forget to create the recovery disks/drive.

• Equium A80-132: do not select options in the Advanced Start menu

  I'm having a problem with my Satellite A80-132...

  When I start it, it continues to go to the page «windows did not close properly...» Start in safe mode, last known good... etc... »

  I know it's an operating system error, but the problem is that I can't select all the options go into the Bios, using the function F2 keyboard...
  Don't know if if anything with the keyboard... even when I press the arrow to select an option, it will not move/work.

  But it does not start when I press Alt + Ctrl + Del to restart shortcut.

  Someone at - it an idieas?

  THX in advance

  Hello

  Are press you able to launch the advanced boot menu F12 immediately after the laptop was powered on?

  You can boot from CD/DVD drive? You can try to press the C button after the laptop was turned on. This should allow the start of the CD/DVD drive

  Check it out!

• Unlock the lost PC Mode

  I have put my IPhone 6 + mode lost my PC but now need to turn it off. My husband got a phone in another State, so I don't have access to it. When I tried to turn of the lost from the PC Mode it just said "the history of the location will be deleted, but the phone is always locked. How to unlock the phone? I can unlock it from my computer? Help, please. Thank you

  Hi Stormblue,

  I see that you want to disable lost on your iPhone mode 6 +. Here is an article that will help you accomplish this task:

  Disable lost Mode or change your details

  You can disable the lost Mode by entering the password of the device, or by following the steps below. Alternatively, you can follow the steps below to change the details displayed on your lost device.

  Note: If your credit and debit cards to pay Apple have been suspended because you put your iPhone 6 or iPhone 6 more in lost Mode, when you disable lost Mode and reconnect to iCloud, you can resume using your cards.

  1. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access the other features iCloud, iCloud implemented on your Mac or iOS device.

  2. Click on all devices, and then select the device that is lost.

  3. Click on lost Mode, then change the information or lost the stop Mode.

  iCloud: use lost Mode

  https://support.Apple.com/kb/ph2700

  Thank you for using communities Support from Apple!

• Satellite M70 - 181:How to unlock the keyboard?

  Hello

  My laptop Satellite M70 does not accept any input key when Windows has started. I suppose some kind of keyboard lock was accidentally activated. Anyone know how to unlock the keyboard?

  Thank you!
  Andreas

  Post edited by: Andreas_7

  Hello

  Check if the LED under the F10 or / and F11 keys lights.
  If yes then disable this feature with the FN + F10 or + F11 key combination

• Unknown channel or name of the repeated feature - settings MAX IVI

  Hi all

  I have problems with the creation of a pilot application based on IVI. I use Agilent N6700B PowerSupply simply configure and output voltage via GPIB with LV2009 (and Win7). The main issue is with the name of the 'channel' I need to specify in the application. Could someone please confirm ChannelName should I use and if the MAX settings are correct? I have attached all necessary files.

  When I run my application I get following "IviDCPwr IVI Converter.vi error error message

  The primary error: unknown channel (Hex 0xBFFA0020) or
  name of the feature repeated.

  Complete calling chain:      IVI IviDCPwr
  Error Converter.vi IviDCPwr
  Configure the output Range.vi GPIB.vi"

  Any help is very appreciated

  Kind regards

  PK

  Hi, PKI,

  The correct physical name for the channel is '1' and it was filled for you by the driver under the advanced > Instrument Driver Software Module (see MAX1.jpg). You can name your virtual channel name well you want under the pilot Sessions > section virtual names, but the physical name must always be 1 as specified in the driver (MAX2.jpg). In your application, make sure that you use exactly the same name for the virtual channel as recorded in MAX.

• The scrolling feature is flicking/back to top of page when I move the scroll bar

  When I use the scroll function in the menu of the Explorer, it flashes back and forward/back back to top - when I move the scroll bar!

  It may be a virus or something, but my antivirus software cannot be removed (antivirus software: 360 Total Security)

  Would appreciate help or a solution.

  Thanks in advance.

  Hey @Nanoq ,

  Welcome to the HP Forums!

  I understand that the continuous scroll bar jump around as if it were in a clip of House of Pain.

  Can you tell me if you use the scrolling feature of the touchpad or if you're clicking and dragging the scroll bar?

  It is a feature of laptop I always had personal problems with touch keys. Not that there is anything wrong with it, I just have a bad habit of going a little too far to the left or the right. When he loses in this regard, he always comes back to where I started scrolling. Same thing on my MacBook and my laptop.

  If this sounds like the same thing is happening to you try a mouse to see if the same problem occurs. If If are you could be right about a virus. Check and see if the problem occurs in several programs, if you do not have to try and fine-tune things.

  I also suggest using a program like Malwarebytes (available free online) to search for infections. It is always nice to get a 'second opinion' possible infections.

  I look forward to your reply!