Unregister for events responsible for recall-screw up sheets

Similar Questions

• Events unregistering on a cluster without Unregistering for all dynamic events

  Hello everyone

  I've been playing with dynamic event record but I hit a problem.

  Normally if I want to stop triggering events on a single control I will be wire constant ref with the correct type in the registry for block of events. This means that I don't have to use the unregister for events block and then rebuild the entire events list to registry when I only want to stop the events on a control.

  However, if I try to bring together a group of the refs (which cannot necessarily be of the same type) in a cluster then I can no longer cancel the events on this cluster registration from the register of events work a group of control constants.

  An alternative would be to use an array instead of a cluster, but this has two disadvantages: it does not create a case of dynamic event for each Member of the array and all controls must be the same type or they are co-erced to a more generic control class.

  I've attached an example VI (labVIEW 2011 SP1)

  I think I finally get the problem now.

  You need feed two references in separately.  You can cluster the registry OUT for events, I know, but I don't think that what you want will work.  You know that you can enter the tables in a table instead of a cluster, right?

  Shane.

  PS to be clearer.

  Register to activate your button separately from the rest.  Save all your "to be marketed" references - individually, not clustered - in a second 'register to events' and then together the two outputs (with the Save refnums event) before passing into the structure of the event.  You might have what you want.  So big cluster AFTER signing up, not before.

• Looking for a screw with specific properties

  I maintain a LabVIEW project (1000 + screws), and some portions are reentrant.  I want to reduce memory footprint.  One method, that I intend to use to do this is editing VI properties for some screws I need to be able to search through all these screws to identify those who have the following set of properties VI execution:

  (1) 'Allow debugging' checked

  (2) 're-entrant execution' checked

  (3) "clone to Preallocate for each instance' selected

  Once I find these screws, then in the IA function complexity, its use, and if or not he converses with material resources or ask for input from the user, determine whether or not it is course change the properties of the VI to: disable debugging, or select 'Share the clones between instances' instead of 'Clone of Preallocate for each instance.

  The problem I have is this: How can I create a search looking for VI with specific property VI settings?

  Thank you

  Richard Ballantyne

  Here is a LabVIEW 2009 code that search in a folder or file LLB to find all the screws that match certain properties of execution of VI.

• change the properties of VI for all screws in a library at the same time

  I want to change the properties of VI for all of the screws in my library (specifically the execution properties). Is there a quick way to do it if I can avoid individually open each VI?

  You can do this in a script.  Open a refers to the edict of VI the VI, and then save it.  Here is an example that can do this for the edition of the documentation of a set of voluntary initiatives.

  https://decibel.NI.com/content/docs/doc-17043

• Fried Macbook / lost serial number for CS6 / screwed?

  Hi all!

  I recently FRIED my Macbook for College with my Adobe Creative Suite of Adobe CS6: web and premium edition. A technician looked and checked that it is not repairable. I have the disk to install my Adobe software yet, but cannot find the serial number and the Adobe ID, I usually buy was under my email assigned to the University... it is no longer active.

  Is it possible to install the software only from the disc without serial number?

  ANY help here would be greatly appreciated!

  This problem has been resolved by the user.

  As luck would have it, I found a calendar with my old adobe password and was able to retrieve my serial number and get CS6 installed on my new Mac! Thanks to the partners a useful discussion on adobe.com.

  John, sorry for your mother. However, perhaps you should stick to 'help' users in the "well, you should have done that... that is what I did, then." forums. Let's be honest - no one in this situation will benefit or care on all locations you have saved your serial number Adobe.

  See you soon!

• Reset the history of revision for all screws in a Bachelor's degree in law

  Is there a way to clean the history of revisions to several screws at the same time, more precisely all in a particular .llb.  I know how to delete each individually, but what a pain.  I was hoping that if I took the top of page vi in llb and registered in the form, and not created the new hierarchy, all the screws would reset... no go.

  I really want to disable the rev history feature.  I know that you can choose to not display the history, but I can't understand how to disable the rev history feature itself.  Which means, if I change a vi 10 times and someone else turns on the display feature, it always shows 0, or 1, not 10.  I want to release the new software with all together in 1 rev, but I can't find any other way to do except go and back story to each individual VI - UGH!

  Thanks in advance!

  You can reset a history of rev screw using VI server to load the vi and a method to reset. See attachment (LV 8.6)

• Create .exe for two screws

  Hi everyone, I tried to understand how the do, I have 2 screws, but Firestone is LOGIN, and if this connection is correct, then open another VI called TESISFINAL, I don't know if it will work ok it done that way.

  Or what I need to do to create an executable file, this first CONNECTION open and if it is correct, then open TesisFinal, do not open 2 screws at the same time.

  

  Google "Build LabVIEW Executable" to learn more about the Application Builder that fits in the LabVIEW project.

  BS

• Hi, when I export my video footage in adobe pro cs6 first, the film does not come out clearly when its ready for recall. I've never had this problem during and uninstalled the software and installed it again, but get the same problem. I tried

  My export settings are mpeg2 dvd and then Pal widescreen high quality that I always used. I have pictures that I tried to export was recorded on a sony 200 1080 50i pxw, can help pls

  You have changed fields less than superior. I don't remember what works with 50i.

  Also, parameters of culture to the left, use "scale to fill" and you will get rid of thin black columns left and right.

• "key down" event dynamic detection called screw

  Hello

  following situation:

  An event using 'touch down' / structure, my reacts on any vi event. Now, I call this vi dynamically by an another vi and load its façade in a panel of sup on the Panel of the calling vi. When running on a panel of sup, the detection of events of the called vi is no longer in effect. How can I save the vi called for the event 'touch down '? I played a bit with the registration of dynamic events, recording aspects of the vi calling to the node for event registration, but yet I have not found a solution.

  Any advice is welcome.

  Thank you

  Peter

  Stoeckel,

  Looks like you have 2 structure current events consecutively, if it is a no no. To run an event structure on an external event structure vi must be dynamic, as you mention above. I would like to check that I'm using the right reference of vi to the node of structure dynamic event block diagram.

• Months of searching for numbers on the sheet

  Hello all and thanks in advance.

  I have tabs at the top. DATA (sheet 1), JAN (sheet 2), FEB (record 3), etc. until the end of the year.

  Data sheet will be the months on the left now I want care to go to the form to correct month and takes the total of the column relative to the other leaves and place in the correct cell line. (I've been copy paste, but I know there is an easier way to do this, so I turn to the people who know the numbers unlike my lack of knowledge.)

  On the leaves of the month, I would also like to highlight the line that are sat and Sun.

  Thanks again everyone for their help.

  Rich

  In the material master

  

  Hi, NN,.

  You will have a Table for each month. Each Table must have a different name. Your summary table lists more than 12 months, then I would say the table name from each month is named with the name of the month AND the year.

  The monthly tables may appear on separate sheets, or the same sheet. The key, as far as the formulae are concerned, is that each Table can be identified by its name.

  The following example includes only the table for April 2016, named "APR 2016", I assumed that the total line will be row 33 on each table of data collection, but wrote the formula to allow the placement of the line totals in other places. The lines for most of the actual days have been hidden and has not been designated, as these labels have no role in the operation of the formula.

  

  The TOTALS is defined as a footer line. The formula, in the columns showing a value is SUM (a) where 'a' is the letter of the column to be added. (The two values of zero have been entered manually for example).

  The table has a unique formula, entered in cell B3 and filled with right and until the last line for which there is a Table whose name corresponds to the label in column A. For example, the formula has been met only 3 online.

  B3: = INDEX (APRIL 2016: $A$ 1: $ 33, MATCH $N ("TOTALS", APRIL 2016: $A, 0), GAME ($ 1 B, APRIL 2016: $1: $1.0),)

  Syntax:

  INSTRUCTION (range,-l'index of the line, column-index, index of the surface)

  range: all of the cells in the source table

  the index of the line: the number of the start line to get the value. This is provided by the first statement of the GAME.

  the index of the column: the number of the column from which to get the value. This is provided by the second statement to MATCH.

  the index of the surface: omis. By default, 1. There is only 1 area of application of this INDEX, all of the source table.

  MATCH (image search-search for, - where - method)

  EQUIV function returns the position in the list of the search for value.

  First case:

  search for: TOTALS text

  search - where: column A of table source

  method): 0 means finding the exact value.

  Second case:

  search for: the text contained in the cell of line 1 of the specified column. That form is completed on the right, the increments of the column by one for each stage.

  search - where: line 1 of table source

  method): 0 means finding the exact value.

  The formula should be changed for each new line. Three references to "APR 2016" should be changed to match the name of the table to collect this row grand totals. Once edited in column A, the formula can be filled right and automatically adapts to his new position.

  Note: The duration value in column F of the table of the month wouldn't transfer and keep the same formula in column C of the summary table. Any attempt to restore the format to match your example resulted in a triangle of error.

  Kind regards

  Barry

• Logo of the society for the Sourcing style sheet (PON_SOURCING_XSLFO.xsl)

  I tried to use an external OA_MEDIA chart below to display it on the Style of Sourcing roadmap.

  The image file is place on our server in the directory $OA_MEDIA.

  < fo: external-graphic src = "url: {' ${OA_MEDIA} / COMPANY_LOGO.}" GIF "}" / > "

  
  Can you tell me where to place this line of code in the .xsl template?
  Please could someone tell me where I'm wrong with the line of code above.

  I also followed the link below and tried everything but nothing works. Please suggest.

  Re: Firmenlogo for IN. Standard

  
  
  Thank you

  Version pl post EBS.

  Have you reviewed MOS 1231313.1 Doc ?

• How long it takes for the new DPS sheets to be available on devices?

  I have create a folio with DPS proffesional multi app. I published my second folio, and although in my DPS builter, published ad is marked it does not appear on devices. Anyone know how long it takes until a folio published is available on devices? Thank you!

  Folio name in the Folio producer and Folio Builder Panel, but it does not appear in the Viewer. This cannot be the issue.

  The name of the Publication appears in the Library Viewer and in the navigation bar of the Viewer. However, if the name of the Publication is used to all folios in an application, the name of the Publication is not displayed in the design library.

  Have you tried to update folio to folio producer? If not, you can try.

• event for "command to the top button" necessary

  Hello

  I have a command button which would have the following measures:

  While it is pushed down, zoom a graph in a predefined area.

  If it is rejected, zoom out

  I don't want to use a toggle button.

  What I did: on EVENT_LEFT_CLICK: SetAxisScalingMode to the desired region, if EVENT_LEFT_CLICK_UP set the scale mode for the region of origin.

  Therefore, as long as the user presses the button, chart is zoomed in, you like.

  Now, there's one small drawback: the user can (unintentionally) 'cheat' and pushing the button, move the mouse cursor away: in this case there is no case of left_click_up more...  I tried using "lost_focus", but this happens only much later, when the user clicks a control. And I tried EVENT_MOUSE_POINTER_MOVE, but it is not practical either: any thrill will zoom out.

  Does anyone have a suggestion/tip to get the desired result?

  Thank you!

  You can then use EVENT_MOUSE_POINTER_MOVE with GetCtrlBoundingRect() to know when the user has moved the pointer of the mouse over the button.  You use the reminder of Panel to do this, because you would not get an EVENT_MOUSE_POINTER_MOVE event in the recall of order once the mouse had moved the off button.  To be more of course, you could also look for EVENT_LOST_FOCUS just in case the user is somehow able to get the cursor of the mouse on the Panel without triggering an EVENT_MOUSE_POINTER_MOVE event somewhere off the coast of the key first.

• FOR MAC PRO HARD DRIVES INTERNAL

  I have 3 internal drives of 1 TB and want to add a 4th disk. Original record say 1 or 2 to, but I have a TB drive 4 or 5. This computer that will manage or am I stuck adding a 2 TB drive?

  Two problems with large capacity disks:

  -There is what some say is a "bug" to erase the drives more of 2.2 to 10.8.4 or later version. It's group of logical volume partitions. To avoid the problem:

  -Do not delete

  -Use a disk from a previous version of OSX utility

  -Clear in an external enclosure that supports large capacity disks

  -Manually remove the partitions of a logical Volume using Terminal Server group.

  Second problem is

  To sled mounting internal:

  The penetration of the screw depth for 'down-screw mount adjacent to the platters' on some readers from over 3 TB have been shortened. This may mean that the live sled down until they adjust and begin to compress the washers on the sled. If this is the case, your drive will not rest flat on the sled and do not breed with the connector backplane without additional adjustment.

  OWC now sells sleds that uses different types of mounting holes in the HD to avoid this problem.

  You can shorten the screws, or put a washer under the head to ensure they can be warm in the authorized depth. Also, now OWC/Macsales now sells sleds that use the location of the different types of mounting screws to avoid this problem. However, these sleds are only for the Pros 2009 and subsequent

• Z240 SFF (V1Z87PA): Z240 SFF - caddy/insert for disk 3,5 '' HARD in

  Hi, I am wanting to install 2 x 3.5 "hard drives in my new Z240 SFF workstation.

  There is a Bay that already came with an insert and one of the new disks slots in this very well.

  "However she looks like some sort of insertion/caddy is necessary for the Bay external/internal' shared 3.5" ", because it is too big for the Hello.adb of the player to crack. It seems that this Bay is dimensioned for a kind of optical discs.

  I called HP and their parts of people here in Australia, but no one can find the part needed.

  Can you please help?

  HP use guides drive insulation elastomer for the sliding of the hard disks in slots in SFF desktop for some time, and adding these for the screw holes of 4 threaded area of a disk HARD caused the need for the metal, as they slide is wider than a 3.5 "drive by almost exactly 1/2 inch when you consider both sides.  If you go on eBay and look for 450712-001, you'll see a bunch of these.  Form factor 3.5 "hard drives still use #6-32 (coarse thread) UNC screws, and it is this than screw silver and blue, rubber vibration insulators are at HP.

  

  Hard drives 2.5 "SSD and optical drives use metric threaded screws M3 instead and HP Color screws for black ones.  Those who are much more difficult to find... Note the more fine metric thread that you can see at the bottom a:

  

  There is a HP kit that I fell that appears to fit your form factor 3.5 "/ exit Bay that is equipped with a receiver that accepts the scrolling images we can screw a 2.5 form factor" SATA HDD or SSD in.  This can be a great way to create backups to disable storage on site, or just to have removable storage.  I use Icy Dock a device like this, and HP has used the Icy Dock products too.  That's what I use, and it fits perfectly into the HP 3.5 "form factor disk Bay on the former positions of work and also fits the 5 HP, 25 - to-3, 5" form factor converters for the new HP workstations... HERE.

  http://www.ICYDOCK.com/goods.php?id=162 I guess you would still need 4 of these arrangements of cursor to do, too.  However, you can only really one large HARD drive storage there hidden behind the front plastic.

  Included with your Z240 SFF it may be #6-32 spare isolation player guides screwed into the metal frame hidden under the Panel front of the work station... HP stored spare parts there are other SFF workstations.  Take a peek...