Up.exe, KERNELBASE.dll APPCRASH Set, installing wireless broadband

Similar Questions

• APPCRASH KERNELBASE.dll

  Hello

  I had a problem with only iTunes software crashing. iTunes works perfectly accept when I click on the iTunes store button, then I get an APPCRASH error. I uninstalled itunes and reinstalled, did not help. I am able to boot in safe mode and everything works fine. There were no recent changes to my other PC that current windows updates. I posted this problem on the apple forum and nobody seems to be able to help. Any help would be appreciated. Thanks in advance.

  Problem event name: APPCRASH
  Application name: iTunes.exe
  Application version: 11.0.5.5
  Application timestamp: 520e4d27
  Fault Module name: KERNELBASE.dll
  Fault Module Version: 6.1.7601.18015
  Timestamp of Module error: 50b83c8a
  Exception code: c06d007e
  Exception offset: 0000c41f
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Yes, I am able to install and access to everything very well. Everything seems to work perfectly but iTunes?

  I tried to register the kernalbase.dll and I got the following error message:

  "The 'KERNALBASE.dll' module was loaded, but the DllRegisterServer entry point was not found. Make sure 'KERNELBASE.dll' is a valid DLL or OCX file and try again.

  

  It is unlikely that the kernelbase.dll is the problem with iTunes.

  Try to copy the QTMovieWin.dll into the folder c:\program files (x 86) \common files\apple\apple application supports file c:\program files (x 86) \iTunes

  It was a suggestion in the following link:

  https://discussions.Apple.com/thread/5252205?start=0&TSTART=0

• First Appcrash with Kernelbase.dll in the defective module always the problem

  Hello world

  After the update drivers associated with (Matrox, NVidia) the problem and checking the material, the problem persists:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe first Pro.exe

  Application version: 5.0.3.0

  Application timestamp: 4ce382d1

  Fault Module name: KERNELBASE.dll

  Fault Module Version: 6.1.7601.17651

  Timestamp of Module error: 4e21213c

  Exception code: c0000005

  Exception offset: 000000000000cacd

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1043

  Additional information 1: 30ea

  More information 2: 30ea564650b9f04e24c8d0b10bbe1000

  Additional information 3 c: 895

  Additional information 4: 895c2477ff9dd3b158f6107ec9f936c4

  What makes in any case kernelbase.dll? It seems to fail clips HD special Matrox, but only when I play their first. It happens when I click on the first source window and then the timeline and then beginning of jogging or rub in the timeline panel. It is switching between source and first program that triggers the appcrash for sure.

  While first actually did when you switch from source the program monitor in the app itself? I noticed on my HDMI video monitor when switching as mentioned, the monitor loses the input signal and is to scan the image. So I guess that this passage is more complicated for the first as you might think.

  Any ideas yet? Nothing I tried really makes a difference. I start to panic a bit now.

  Specs: Windows 7 64-bit, THE Matrox MX02, NVidia Quadro 4000, 24GO RAM, 2.66 sixcore dual CPU, in sense reverse video and OS discs.

  Using the codec HD standard Matrox for first.

  Any help much appreciated.

  I'm sorry, I didn't notice the Quadro card in your initial post. The version that I gave you was for Geforce cards and the Quadro have a tree of different version. The Quadro version equivalent to the driver I meant 275.89. However, they have a Quadro version that is not yet out on their downloads page standard which has the equivalent properties on the latest Geforce. Download and install after you have uninstalled all the software/driver Quadro you currently have.

  http://www.nvidia.com/object/Quadro-Tesla-Win7-WinVista-64bit-285.58-WHQL-driver.html

  Make sure that you choose the custom installation and remove the Nvidia update installation list if it is there. Try and see if that helps. If this isn't the driver to try the 275.89.

  Eric

  ADK

• Event 1000, Application error (the default application name: w3wp.exe - name of the failed module: KERNELBASE.dll)

  Hello guys,.

  During the execution of a web app to make me as a mistake: remote server does not. Here are the details of the spectators of the event who were captured at the same time where this error occurred:
  Event 1000, Application error
  The failing application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb

  Name of the failed module: KERNELBASE.dll, version: 6.1.7600.16850, time stamp: 0x4e211da1

  Exception code: 0xe053534f

  Offset: 0x000000000000a88d

  ID of the process failed: 0 x %9

  Start time of application vulnerabilities: 0 x % 10

  The failing application path: %11

  Path of the failing module: 12%

  Report ID: 13%
  Event 1001, Windows Error Reporting
  Bucket of error, type 0

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: w3wp.exe

  P2: 7.5.7600.16385

  P3: 4a5bd0eb

  P4: KERNELBASE.dll

  P5: 6.1.7600.16850

  P6: 4e211da1

  P7: e053534f

  P8: 000000000000a88d

  P9:

  P10:

  Attached files:

  C:\Windows\Temp\WERC9CD.tmp.WERInternalMetadata.XML

  C:\Windows\Temp\WERC9CE.tmp.HDMP

  C:\Windows\Temp\WEREE30.tmp.mdmp

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_30877924d6b2c607fe88a8718915f25fb79093_cab_e905f2b0

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: d46a6849-8f6a-11e1-98af-00215e6e4855

  Display state: 4
  It is a priority issue we are facing in IIS. IIS is configured for the 2.0 Framework and underlying operating system is Windows Server 2008 R2 Standard. Please suggest how to solve. Any input related question above is significant.

  Hello

  In dealing with the problem with Windows Server 2008, it would be preferable to send the same in the Technet community for more help.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• APPCRASH-fault Module name: KERNELBASE.dll on Skype and Visual Studio

  I had this problem I tried to solve for awhile, please see here, the problem originally: http://stackoverflow.com/questions/24416708/appcrash-on-kernelbase-dll-visual-studio-2010-with-team-explorer

  However, now even my Skype gives me problem. I use Windows 7 Pro x 64. Here are the event log:

  Name of the failing application: Skype.exe, version: 6.16.59.105, time stamp: 0x536b58dc
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1116
  Exception code: 0x8000ffff
  Offset: 0x0000c41f
  ID of the process failed: 0x219c
  Start time of application vulnerabilities: 0x01cfac4234dac60d
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 75ba6604-1835-11e4-948e-1803731bb61d

  I'm sure that the 2 are linked, there is the Visual Studio 10 error:

  The failing application name: devenv.exe, version: 10.0.40219.1, time stamp: 0x4d5f2a73
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1116
  Exception code: 0xc06d007f
  Offset: 0x0000c41f
  ID of the process failed: 0 x 3430
  Start time of application vulnerabilities: 0x01cfac421b84ae96
  The failing application path: C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE\devenv.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 68514913-1835-11e4-948e-1803731bb61d

  I am attaching a mini dump here (on Skype error): https://onedrive.live.com/redir?resid=99D011127EBB96C! 1291 & authkey =! AOZwnhusrgOKfdE & ithint = the file % 2cdmp

  Please help me understand this issue and if figure you it out, please tell me how you understand? I tried to learn using WinDbg to analyze the dump and load the appropriate symbols but for some reason, that I can not find the root cause. Thanks in advance!

  I finally solved the problem after playing with crash dump, WinDBG, I tried to uninstall the Service Pack 1 (windows.microsoft.com/uninstallwindows7sp1) and everything works again.

• Spooler App - ntdll.dll, kernelbase.dll, StackHash_a215 accident

  I have windows Server 2008 R2 installed on a server that hosts multiple printers, the other day I installed a print driver for a HP LJ M601 and the print spooler began to crash frequently. Here's what I see in the event viewer:

  Name of the failing application: spoolsv.exe, version: 6.1.7601.17777, time stamp: 0x4f35fc1d
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc0000374
  Offset: 0x00000000000c40f2
  ID of the process failed: 0 x 1970
  Start time of application vulnerabilities: 0x01ce50db950e833e
  The failing application path: C:\Windows\System32\spoolsv.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: ff4c3f38-bcce-11e2-9e9b-bc305bee273f

  --
  Bucket of error, type 0
  Event name: APPCRASH
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: spoolsv.exe
  P2: 6.1.7601.17777
  P3: 4f35fc1d
  P4: StackHash_a215
  P5: 6.1.7601.17725
  P6: 4ec4aa8e
  P7: c0000374
  P8: 00000000000c40f2
  P9:
  P10:

  -------------------------------------------------------------------------------------------------------

  Name of the failing application: spoolsv.exe, version: 6.1.7601.17777, time stamp: 0x4f35fc1d
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc0000005
  Offset: 0x00000000000532d0
  ID of the process failed: 0 x 1044
  Start time of application vulnerabilities: 0x01ce50d75b2709fc
  The failing application path: C:\Windows\System32\spoolsv.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: aee76d32-bcce-11e2-9e9b-bc305bee273f

  -----
  Bucket of error, type 0
  Event name: APPCRASH
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: spoolsv.exe
  P2: 6.1.7601.17777
  P3: 4f35fc1d
  P4: ntdll.dll
  P5: 6.1.7601.17725
  P6: 4ec4aa8e
  P7: c0000005
  P8: 00000000000532d 0
  P9:
  P10:

  The first error seems to be caused by a stackhash, that is, from my understanding, a confrontation with how the data are processed by memory; the origin of the memory down and produce the stackhash error. I could be wrong on this matter. But anyway it is a response to 'why what is happening' and not 'how to fix this. I guess that one of the drivers of HP is originally this question, but I wonder how I can find the source of the problem. I installed the debugger windows and trying to educate myself on how to debug .mdmp files found in the folder ReportQueue to solve the problem.

  The second error causes (corruption of heap?) access violation caused by KERNELBASE.dll and ntdll.dll? I don't know too much about the memory segment to go further on this issue.

  What I'm looking for is an explanation on how to use the windows debugger to direct me in the right direction, or for someone to take a look at the reports generated in my C:\ProgramData\Microsoft\Windows\WER folder to point me in the direction of which is the cause of the crash. I have these files uploaded to skydrive and am willing to share them to all of you who are willing to help.

  Here's a little story that I work with:

  Server 2008 R2 with 5 shared network printers.

  With the help of Pcounter for windows to manage printing.

  Printers are shared with the possibility for mac clients to connect and print to printers via LPD. LPD services are enabled on the server.

  Error seems to happen randomly, seems to be linked to mac users. Pcounter control service 'in silence' stop and kill the spooler. What I mean by "silently", is that the service seems to work normally, but if you go into the event viewer you see the above error messages, and then notice that the service must be restarted to make it work properly. I have been searching forums for the last few days to try to resolve this problem, the brain feels fried a little ATM, so I'm not sure information I can give more useful. I'll stop here and explain in more detail if necessary.

  A big thank you to those who can help.

  ---
  Tommyd206.

  Hi Tommy,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information helps.

• Accident, mistake of programs: kernelbase.dll fault module. Application crash

  I have several programs that seem to be in conflict with kernelbase.dll. They crash the moment where I'm starting the kernelbase.dll is fault module.

  I tried to install windows twice but the problem persists.

  I tried to run "clean boot".
  I tried to "Windows Resource Protection.
  I tried to run the program in compatibility with different States.

  Nothing helps. Any ideas?

  The error message is pasted below:

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: MDataTools.exe
  Application version: 2.0.758.0
  Application timestamp: 4b 210990
  Fault Module name: KERNELBASE.dll
  Fault Module Version: 6.1.7600.16385
  Timestamp of Module error: 4a5bdaae
  Exception code: e0434f4d
  Exception offset: 00009617
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1044

  I guess you answered yourself. Corruption of the user profiles.

  Log in as a different user. Rename profile problem. Log in as the user of origin again. A new profile will be created. If the accident is missing, copy your on your user of the damaged data.

  If this does not resolve the issue. Repeat the steps with the default folder too. This is the profile of the model, creating new profiles.

  concerning

  Martin

• KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdbdf Exception code: 0xe0434f4d fault offset: 0x0000b727

  Hi all just make me this error with KernelBase.dll, what happens to my end of the application, is that I am using .NET Framework to determine if network connectivity is available, to raise an event from a dll underlying to notify the application when network connectivity is established, or network connectivity is not available. Nothing really special here just using standard stuff of .net framework here.  Have seen similar incidents withKERNELBASE.dll reported, but nobody of really give any info on which exception 0xe0434f4d is a code.  Knowing what would be the execption, would allow me to find a quick solution to the problem. BizTalk seems to have a similar problem with KERNELBASE.dll. 

  Additional information that may help is that I am under the .NET application on a Windows 7 computer less than 100 MB of storage space, well below the recommended minimum of 300 MB, but test the .NET to test application it is now. This should work if Windows 7 does not work.

  Here is the excerpt from the Windows application log:-

  Name of the failing application: INNOBATE Antivirus.exe, version: 1.0.0.11, time stamp: 0x4c9b2d79

  Name of the failed module: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdbdf

  Exception code: 0xe0434f4d

  Offset: 0x0000b727

  ID of the process failed: 0x27d4

  Start time of application vulnerabilities: 0x01cb5b0ba112d3af

  The failing application path: C:\Program Files (x 86) \INNOBATE Limited\INNOBATE® AntiVirus 2011 Home\1.0.0.0\INNOBATE Antivirus.exe

  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll

  Report ID: 44a2d8f1-c6ff-11df-88ee-001d7d99d5fa

  Fault bucket 2039362628, type 1

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: INNOBATE Antivirus.exe

  P2: 1.0.0.11

  P3: 4c9b2d79

  P4: KERNELBASE.dll

  P5: 6.1.7600.16385

  P6: 4a5bdbdf

  P7: e0434f4d

  P8: 0000b 727

  P9:

  P10:

  Attached files:

  C:\Users\PCX\AppData\Local\Temp\WER564D.tmp.WERInternalMetadata.XML

  These files are available here:

  C:\Users\PCX\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_INNOBATE Antivir_64c1975bd6fee9fd4d6050ca3ff88ae0134d5bfd_2ff3e37e

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 44a2d8f1-c6ff-11df-88ee-001d7d99d5fa

  State: 1

  The failing application path: C:\Program Files (x 86) \INNOBATE Limited\INNOBATE® AntiVirus 2011 Home\1.0.0.0\INNOBATE Antivirus.exe

  Path of the failing module: \KERNELBASE.dllsyswow64 C:\Windows\

  Report ID: 44a2d8f1-c6ff-11df-88ee-001d7d99d5fa

  That tells me, that you are using a 32-bit program on a 64-bit Windows 7. AntiVirus tools must be 64-bit on a 64 bit OS. Install the 64-bit Version of your AntiVirus tool.
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• KERNELBASE.dll error opening Excel under Windows 7 32 bit

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: EXCEL. EXE

  Application version: 12.0.6514.5000

  Application timestamp: 4a89db07

  Fault Module name: KERNELBASE.dll

  Fault Module Version: 6.1.7600.16385

  Timestamp of Module error: 4a5bdaae

  Exception code: e06d7363

  Exception offset: 00009617

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Hello

  have you installed addins for Excel? If so, disable them and restart Excel.

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• LaserJet M1212nf: Problems setting up wireless printing

  I can set up to print from my laptop with a USB connection to the printer. I want to be able to print when away from my office, so have tried for 2 years, on and off, to get my printer to print wireless. I spent probably 10 + hours trying to get this set up. In the end, I always end up having to reinstall the printer with the same old USB connection.

  It drives me crazy. I'm a tech writer for a society of software and very savvy in computer science. However, my non-techie family have all managed to set up wireless printing at their home in 5 minutes or less with different brands of printers.

  Here are the steps that I followed, although I also tried many variations, like trying with my USB cable connected or disconnected.

  (1) uninstall the current installation of the printer (USB).

  (2) on the printer itself, make sure that the settings > network settings are the default values.

  (3) using the latest drivers and installation .exe from the HP site, start a new installation of the printer.

  (4) when you are prompted, select "wireless."

  RESULT: even if my firewall is turned OFF, search and indicates that he is there any printer on the network. (Huh? Which network?)

  (5) try again once and this time select "Network Setup."

  RESULT: even if my firewall is turned OFF, search and says that it cannot detect a network.

  If the wireless installation requires a network, but network installation does not cause a network to install, I don't know where to go from here.

  (6) I also tried downloading and installing the ePrint utility, but when I'm at halfway through the installation, it tells me that it cannot find my printer.

  I am suspicious that my model M1212nf MFP may even not allow for wireless printing. Some info on the HP site says to check a particular button lights up to indicate that the printer is online. This light does not exist on my printer model. However, the parameters of the printer from my physics has parameters such as: "show IP address," etc., which would lead me to believe that it can work wireless.

  I have read all the help related HP printer, and there is nothing which explains, in simple language, what are the types of cables, I need to set up a network and the Wi - Fi connection, when to plug them in, what facilities to perform on the many Add - ons available, etc.. I don't know that it's a 5 minute process if there was just a good explanation in the help of the UP of how do. Assistance would be appreciated!

  Hello @SKYdiz,

  Welcome to the Forums of HP Support!

  I understand that you have had problems for the last 2 years and spent many hours trying to configure your HP LaserJet Pro M1212nf MFP for wireless printing. At this point I'll provide more information about it. First of all, are sitting you?

  Unfortunately, the HP LaserJet Pro M1212nf multifunction printer isn't a model wireless printer. The "nf" at the end of the name of the printer is the abbreviation of 'network, fax. Therefore, if your printer is not able to connect to your router wireless, it CAN connect with an ethernet cable.

  All you need to do is connect an ethernet cable to the back of your printer to your router. That all devices connected to this router even (whether through wireless or wired ethernet connections) would be able to 'see' your printer on the network and print it on your printer. For more information on configuring ethernet on your printer, please visit: Setup the printer to a wired network in Windows 7 for HP's LaserJet printers.

  Now, if an ethernet connection does not work in your specific network, HP makes other Laserjet models that do not use the wireless function. Here are two LaserJet who are black only, multifunction wireless units that resemble your current printer model: HP LaserJet MFP HP LaserJet MFP M225dw Pro and M127fw Pro.

  Please let me know if this clears up any confusion. If you have other questions or concerns, I'll be more than happy to help you. Happy new year!

• Random crashes application of kernel32.dll kernelbase.dll and ntdll.dll

  I am experiencing appcrahes randomly in my Windows 7 laptop, I work the following configuration:

  Laptop: Asus K55VM R500V
  Windows 7 Home Premium 64 bit - SP 1 - Build 1130
  Problem:
  Accidents occur at random times with random applications. Which can be either my Steam Client, Skype, Google Chrome, QQ International Messenger, or Windows Explorer. It doesn't matter if I use them all at the same time only two or what I do with my laptop. Often when I play the video game heavy (i.e. Far Cry 3) my laptop is fine, but all simply using my email can cause a malfunction.
  I used the logger to see what was causing the crash as Solutions Windows only tells me to update my programs (all programs are up to date) and I discovered that all accidents are caused by Kernel32.dll Kernelbase.dll & (only for third-party software) and ntdll.dll (Windows Explorer only). Another thing that might be important, is that, generally, applications fail when you do
  . For example, I use Skype, I feel a freeze, Windows tells me that the program has stopped working, when I check my other programs, I see that the rest I was running also closed.
  The Eventviewer error codes:
  The following codes appear in my event viewer, whenever my requests fall I have the same error codes over and over again.
  The failing application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc0000005
  Offset: 0x00000000000587d8
  ID of the process failed: 0xd78
  Start time of application vulnerabilities: 0x01ce26069474b546
  The failing application path: C:\Windows\Explorer.EXE
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 0e2ce05c-9264-11e2-ad10-10bf482cb231
  Name of the failing application: Skype.exe, version: 6.3.0.105, time stamp: 0x512fa5e2

  The failed module name: kernel32.dll, version: 6.1.7601.18015, time stamp: 0x50b83c89

  Exception code: 0xc0000005

  Offset: 0x000111e2

  ID of the process failed: 0 x 638

  Start time of application vulnerabilities: 0x01ce248ff0e47f10

  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe

  Path of the failing module: C:\Windows\syswow64\kernel32.dll

  Report ID: 0af4d3f9-9089-11e2-92ab-10bf482cb231
  Name of the failing application: chrome.exe, version: 25.0.1364.172, time stamp: 0x513d06c4

  The failed module name: kernel32.dll, version: 6.1.7601.18015, time stamp: 0x50b83c89

  Exception code: 0xc0000005

  Offset: 0x000111e2

  ID of the process failed: 0x1b54

  Start time of application vulnerabilities: 0x01ce249249287ef0

  The failing application path: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe

  Path of the failing module: C:\Windows\syswow64\kernel32.dll

  Report ID: 0af4ace9-9089-11e2-92ab-10bf482cb231
  Name of the failing application: steam.exe, version: 1.70.46.67, time stamp: 0x5143b70d

  The failed module name: kernel32.dll, version: 6.1.7601.18015, time stamp: 0x50b83c89

  Exception code: 0xc0000005

  Offset: 0x000111e2

  ID of the process failed: 0 x 1348

  Start time of application vulnerabilities: 0x01ce248a5e2a817e

  The failing application path: C:\Program Files (x86)\Steam\steam.exe

  Path of the failing module: C:\Windows\syswow64\kernel32.dll

  Report ID: 0b0500d6-9089-11e2-92ab-10bf482cb231
  What have I've tried so far...
  I started looking for answers to my problem, and I tried the following:
  -Updated all my drivers
  -Device Manager checked manually to the required updates
  -J' checked my files system at the command prompt
  -J' I made sure all the software has been updated, including windows of course
  -J' did a clean install of Windows
  -After that the problem remains I did Memtest86 v4.2 (just to be sure I pass for 35 times)
  -Important to know are that since the beginning, I bought this laptop (5 months ago) I've been running Norton 360 and I am now updated, so any virus or malware is also out of the question.
  I think this would be it, it's really driving me crazy... I think I have almost tried everything and I don't know what else to try. The warranty only covers hardware failures and like memtest86 passed, I am not eligible for any support software at my retailer.
  I would be really grateful for any help or suggestion, if you need other information or error logs please let me know.
  Thanks in advance!
   

  Hi Joepvan der Poel,

  The question seems to be because of two system knowledge of kernel32.dll and ntdll.dll files

  Since you did a clean install of Windows 7 and still the problem reappears, it seems that the version of Windows installed on your computer and on the aswell of media is corrupt. That's why I suggest you get a copy of these two files, kernel32.dll and ntdll.dll of another trust worthy Windows 7 computer running the same version, edition and service pack and stick it in the c: drive > Windows > System32 folder and save the files again and check if the problem persists.

  To reregister the files follow these steps:

  a. click on the "Start" menu, click on 'run '.

  b. in the "Open" box type " kernel32.dll/regserver", without the quotes and press ENTER.

  c. for ntdll.dll type ""ntdll.dll /regserver ", without the quotes and press ENTER."

  It will be useful.

  Please return to the State of the issue and also let us know if you face any problem of Windows in the future and we will be happy to help you.

• VGPU session disconnects with pcoip_server_win32.exe NvFBC.dll

  I run a proof of concept VGPU VDI using Horizon 6.1 and Vsphere 6

  
  

  I have only 8 test VDI users and the solution is running on the local network.

  
  

  Some users reported session disconnects and w hen I checked the event logs on the clients (windows 7 64-bit) the following are entries.

  
  

  Users can reconnect to the session almost immediately and no work is lost.

  
  

  I use some Autodesk products (Revit, Navisworks, etc.) on the clones related and so far, the results have been very good and it is only slight complaint.

  
  

  Someone at - it ideas?
  

  
  

  The failing application name: pcoip_server_win32.exe, version: 3.30.0.50438, time stamp: 0x54d1c88a

  The failed module name: NvFBC.dll, version: 6.14.13.4752, time stamp: 0x54d3ad55

  Exception code: 0xc0000005

  Offset: 0 x 00002474

  ID of the process failed: 0 x 3050

  Start time of application vulnerabilities: 0x01d09d05d59b60fa

  The failing application path: C:\Program Files\Common Files\VMware\Teradici PCoIP Server\pcoip_server_win32.exe

  Path of the failing module: C:\Windows\Syswow64\NvFBC.dll

  Report ID: fe48f786-092e-11e5-b5e4-00505695e34e

  
  

  
  

  
  

  Bucket of error, type 0

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: pcoip_server_win32.exe

  P2: 3.30.0.50438

  P3: 54d1c88a

  P4: NvFBC.dll

  P5: 6.14.13.4752

  P6: 54d3ad55

  P7: c0000005

  P8: 00002474

  P9:

  P10:

  Attached files:

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_pcoip_server_win_4265ee79b0dcca81767abba3972da7a250fe2_3f7a349a

  Table of contents preceding:

  Version = 1

  EventType = APPCRASH

  EventTime = 130777269154662904

  ReportType = 2

  Consent = 1

  ReportIdentifier = fe48f787-092F-11e5-b5e4-00505695e34e

  IntegratorReportIdentifier = fe48f786-092F-11e5-b5e4-00505695e34e

  WOW64 = 1

  1. Response.Type = 4

  SIG [0]. Name = name of the Application

  SIG [0]. Value = pcoip_server_win32.exe

  GIS [1]. Name = Version of the Application

  GIS [1]. Value = 3.30.0.50438

  GIS [2]. Name = timestamp of the Application

  GIS [2]. Value = 54d1c88a

  GIS [3]. Name = name of the Module fault

  GIS [3]. Value = NvFBC.dll

  GIS [4]. Name = Fault Module Version

  GIS [4]. Value = 6.14.13.4752

  GIS [5]. Name = Fault Module Timestamp

  GIS [5]. Value = 54d3ad55

  GIS [6]. Name = Exception Code

  GIS [6]. Value = c0000005

  GIS [7]. Name = offset of the Exception

  GIS [7]. Value = 00002474

  DynamicSig [1]. Name = OS Version

  DynamicSig [1]. Value=6.1.7601.2.1.0.256.48

  DynamicSig [2]. Name = locale ID

  DynamicSig [2]. Value = 2057

  DynamicSig [22]. Name = additional Information 1

  DynamicSig [22]. Value = 0a9e

  DynamicSig [23]. Name = additional Information 2

  DynamicSig [23]. Value = 0a9e372d3b4ad19135b953a78882e789

  DynamicSig [24]. Name = additional Information 3

  DynamicSig [24]. Value = 0a9e

  DynamicSig [25]. Name = additional Information 4

  DynamicSig [25]. Value = 0a9e372d3b4ad19135b953a78882e789

  UI [2] = c: Files\VMware\Teradici PCoIP Server\pcoip_server_win32.exe

  UI [5] = check online for a solution (recommended)

  UI [6] = check for a solution later (recommended)

  UI [7] = close

  UI [8] = PCoIP Server has stopped working and was closed

  UI [9] = a problem caused the application to stop working correctly. Windows will notify you if a solution is available.

  UI [10] = & close

  LoadedModule [0] = c: Files\VMware\Teradici PCoIP Server\pcoip_server_win32.exe

  LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll

  LoadedModule[2]=C:\Windows\syswow64\kernel32.dll

  LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll

  LoadedModule [4] = c: Files\VMware\Teradici PCoIP Server\inputdevtap.dll

  LoadedModule[5]=C:\Windows\syswow64\ADVAPI32.dll

  LoadedModule[6]=C:\Windows\syswow64\msvcrt.dll

  LoadedModule[7]=C:\Windows\SysWOW64\sechost.dll

  LoadedModule[8]=C:\Windows\syswow64\RPCRT4.dll

  LoadedModule[9]=C:\Windows\syswow64\SspiCli.dll

  LoadedModule[10]=C:\Windows\syswow64\CRYPTBASE.dll

  LoadedModule[11]=C:\Windows\syswow64\USER32.dll

  LoadedModule[12]=C:\Windows\syswow64\GDI32.dll

  LoadedModule[13]=C:\Windows\syswow64\LPK.dll

  LoadedModule[14]=C:\Windows\syswow64\USP10.dll

  LoadedModule[15]=C:\Windows\system32\Secur32.dll

  LoadedModule[16]=C:\Windows\system32\WTSAPI32.dll

  LoadedModule[17]=C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCR90.dll

  LoadedModule [18] = c: Files\VMware\Teradici PCoIP Server\svgadevtap.dll

  LoadedModule[19]=C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCP90.dll

  LoadedModule [20] = c: Files\VMware\Teradici PCoIP Server\libidn.dll

  LoadedModule [21] = c: Files\VMware\Teradici PCoIP Server\pthreadVC2.dll

  LoadedModule[22]=C:\Windows\syswow64\WS2_32.dll

  LoadedModule[23]=C:\Windows\syswow64\NSI.dll

  LoadedModule [24] = c: Files\VMware\Teradici PCoIP Server\VMwareResolutionSet.dll

  LoadedModule[25]=C:\Windows\syswow64\SHELL32.dll

  LoadedModule[26]=C:\Windows\syswow64\SHLWAPI.dll

  LoadedModule [27] = C:\Windows\syswow64\PSAPI. DLL

  LoadedModule[28]=C:\Windows\syswow64\CRYPT32.dll

  LoadedModule[29]=C:\Windows\syswow64\MSASN1.dll

  LoadedModule[30]=C:\Windows\system32\dbghelp.dll

  LoadedModule [31] = C:\Windows\system32\IPHLPAPI. DLL

  LoadedModule [32] = C:\Windows\system32\WINNSI. DLL

  LoadedModule[33]=C:\Windows\syswow64\SETUPAPI.dll

  LoadedModule[34]=C:\Windows\syswow64\CFGMGR32.dll

  LoadedModule[35]=C:\Windows\syswow64\OLEAUT32.dll

  LoadedModule[36]=C:\Windows\syswow64\ole32.dll

  LoadedModule[37]=C:\Windows\syswow64\DEVOBJ.dll

  LoadedModule[38]=C:\Windows\system32\WINMM.dll

  LoadedModule [39] = C:\Windows\system32\IMM32. DLL

  LoadedModule[40]=C:\Windows\syswow64\MSCTF.dll

  LoadedModule[41]=C:\Windows\SysWOW64\vmwsci.dll

  LoadedModule[42]=C:\Windows\syswow64\profapi.dll

  LoadedModule [43] = c: Files\VMware\Teradici PCoIP Server\pcoip_crypto_non_fips.dll

  LoadedModule[44]=C:\Windows\system32\WSOCK32.dll

  LoadedModule[45]=C:\Windows\system32\CRYPTSP.dll

  LoadedModule[46]=C:\Windows\system32\uxtheme.dll

  LoadedModule[47]=C:\Windows\system32\rsaenh.dll

  LoadedModule[48]=C:\Windows\system32\dwmapi.dll

  LoadedModule[49]=C:\Windows\system32\mswsock.dll

  LoadedModule[50]=C:\Windows\System32\wshtcpip.dll

  LoadedModule[51]=C:\Windows\system32\NLAapi.dll

  LoadedModule[52]=C:\Windows\system32\napinsp.dll

  LoadedModule[53]=C:\Windows\system32\pnrpnsp.dll

  LoadedModule[54]=C:\Windows\system32\DNSAPI.dll

  LoadedModule[55]=C:\Windows\System32\winrnr.dll

  LoadedModule[56]=C:\Windows\System32\wship6.dll

  LoadedModule[57]=C:\Windows\system32\rasadhlp.dll

  LoadedModule[58]=C:\Windows\System32\fwpuclnt.dll

  LoadedModule [59] = C:\Windows\system32\dhcpcsvc. DLL

  LoadedModule [60] = c: Files\VMware\Teradici PCoIP Server\pcoip_mfw.dll

  LoadedModule[61]=C:\Windows\system32\VERSION.dll

  LoadedModule[62]=C:\Windows\system32\CRYPTUI.dll

  LoadedModule[63]=C:\Windows\system32\ntmarta.dll

  LoadedModule[64]=C:\Windows\syswow64\WLDAP32.dll

  LoadedModule [65] = c: Files\VMware\Teradici PCoIP Server\ViewMMDevRedir.dll

  LoadedModule[66]=C:\Windows\system32\credssp.dll

  LoadedModule[67]=C:\Windows\SysWOW64\msv1_0.DLL

  LoadedModule[68]=C:\Windows\system32\cryptdll.dll

  LoadedModule [69] = c: Files\VMware\Teradici PCoIP Server\VMwareView - RdeVchanStub.dll

  LoadedModule [70] = c: Files\VMware\Teradici PCoIP Server\pcoip_vchan.dll

  LoadedModule[71]=C:\Windows\system32\apphelp.dll

  LoadedModule[72]=C:\Windows\system32\ncrypt.dll

  LoadedModule[73]=C:\Windows\system32\bcrypt.dll

  LoadedModule[74]=C:\Windows\syswow64\USERENV.dll

  LoadedModule[75]=C:\Windows\SysWOW64\bcryptprimitives.dll

  LoadedModule[76]=C:\Windows\system32\GPAPI.dll

  LoadedModule [77] = c: Files\VMware\Teradici PCoIP Server\audiodevtap.dll

  LoadedModule[78]=C:\Windows\Syswow64\NvFBC.dll

  LoadedModule[79]=C:\Windows\system32\d3d9.dll

  LoadedModule[80]=C:\Windows\system32\d3d8thk.dll

  LoadedModule[81]=C:\Windows\system32\nvapi.dll

  LoadedModule[82]=C:\Windows\system32\nvd3dum.dll

  LoadedModule[83]=C:\Windows\system32\powrprof.dll

  FriendlyEventName = Stopped Working

  ConsentKey = APPCRASH

  AppName = Server PCoIP

  AppPath = c: Files\VMware\Teradici PCoIP Server\pcoip_server_win32.exe

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: fe48f786-092e-11e5-b5e4-00505695e34e

  Display state: 4

  Check out this post on the forum.

  VMware View 6.1 Zero-Client disconnect

  Newer drivers are available on the NVIDIA site to the link NVIDIA DRIVERS NVIDIA GRID VGPU SOFTWARE RELEASE 346.68/348.27 WHQL

  Only Windows drivers are updated and need to be updated. ESXi pilots remain the same.

• Yet CS5 crashes when opening - Windows 7 Pro 64 bit OS - KERNELBASE.dll fault - is how can this be repaired?

  CS5 program still crashes when opening. This can be repaired.

  I upgraded accidentally to Windows 10. I discovered that the majority of my CS5 Production Premium software is incompatible with Windows 10. I reinstalled Windows 7 Profession since the backup file. Everything seemed fine function until I tried to open again. Shortly after the opening again it crashed, and she continues to do so. Here is the text of the problem connect when the software crashed and consider closing.

  Problem event name: APPCRASH

  Application name: Encore.exe Adobe

  Application version: 5.0.0.508

  Application Timestamp: 4ba2cf79

  Fault Module name: KERNELBASE.dll

  Fault Module Version: 6.1.7601.18933

  Fault Module Timestamp: 55a69ec4

  Exception code: e06d7363

  Exception offset: 0000c42d

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  
  

  Thanks, I'll try to remember to do.

  It worked as well as import in the still rather than export them via dynamic links of Premiere Pro.

  Thank you, again. I really appreciate the help.

• bcmwltry.exe with / DLL initialization failed in windows xp

  I write a question on behalf of the client. Here's the problem of the customer:

  Playing Cityville Facebook my laptop crashes every time with the following problem, bcmwltry.exe with / DLL initialization failed. I don't know what it is or how to fix it?

  Hello
   
  ·         How long have you been faced with this problem?
  ·         Did you do changes on the computer before the show?
  ·         The problem happens only when playing Cityville Facebook?
   
  bcmwltry.exe is located in the C:\Windows\System32 folder, but is not a Microsoft System file. It's a Broadcom Corporation Wireless Network Tray Applet.
   
  Go to the Task Manager and stop the process, or it will consume memory and can cause your computer down.
  To complete the process in the Task Manager, follow these steps:
   
  a. press the keys Ctrl + Alt + Delete , and then select the Task Manager
  b. end of the process(bcmwltry.exe) running in the background
   
  You can also consult with Broadcom for additional help.
   
  Hope this information helps.

• Crash Application KERNELBASE.dll

  I've known a program crash involving the KERNELBASE.dll file while trying to open Corel VideoStudio, at first I thought it was because of this software, so I uninstalled and reinstalled it and the accident happening again. I used this software Tweakfix, which set what he said, he would, but the accident happened again. I don't know what exactly is the problem and it could be a symptom of a much bigger problem (because it can cause the BSOD in some cases) can someone help me with this?

  I discovered that the problem is related to 2 Microsoft Security updates

  KB312587 and KB3126593

  See thread at:

  http://Forum.Corel.com/en/viewtopic.php?t=58668&p=321367

  I uninstalled both updates and Visual Studio now works again.