iRat - remote client?

Similar Questions

• updates - updates has not pushed to remote clients (Windows Server 2003)

  original title: critical updates

  Hello

  I have an Windows Server 2003 with Windows XP Pro SP3 clients/members area and allows you to push critical updates for WSUS clients.

  However, updates are not pushed to the remote clients even with the connected VPN tunnel.  The only time updates are pushed to these remote clients is when they visit the office and connect to our LAN.

  Is there a way for remote clients to get their updates without having to remove them as a member of my domain?

  Thank you...

  Forum specific support by WSUS:
  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

• Lookout 5.1 Remote Client does not not with Lookout Client 6.1

  I hope you guys can help me make a remote client of Lookout 5.1 runs in 6.1.

  On my computer, I installed Lookout Client 5.1 and he ran a remote client (we'll call it "MyRemoteClient.lp4").

  We have recently upgraded to Lookout Client 6.1 and when we run 'MyRemoteClient.lp4', he says that it was created by an older version of Lookout and recomiple the file source 'MyRemoteClient.lks '.

  What source he speaks?  The only source I have is for the server process. We can uncompile the "MyRemoteClient.lp4" and recompile since I donot have 'MyRemoteClient.lks'? ".

  Thank you

  Max

  The .lks file is the source file, but the .l4p is the file have respected is not compatible version. You must open the file .lks of the 6.x process if the process is created in 5.1.

  You have the development lookout 5.1 Server? You can open the .l4p file and save it. The .lks file is generated.

• Remote clients are denied access to the portal...

  We're having sporadic problems with remote clients are denied access to our portal, they do not even have a login prompt.  We use a SRA 4600 with SonicOS SSL - VPN 8.0.0.3 - 23sv but have see on 8.0.0.1 as well.

  Journal entry:

  Threat of prevented WAF: Injection SQL 1 attack
  More details

  Entry matching: _ga = ga1.2.676072112.1440205737; _dc_gtm_ua-21325736-1 = 1
  Threat: SQL Injection attack 1
  Threat ID: 9005
  Description: SQL Injection is a technique of attack used to exploit websites that construct SQL statements from user-supplied input
  URI: remote.ncmic.com:443/
  Agent: Mozilla/5.0 (Windows NT 10.0;) WOW64; Trident/7.0; RV:11.0) as the Gecko

  The field 'entry matched' is not indicative of the entry that is triggering the signature. There would be something else, we need to study. Can you please make a ticket and we provide access to the portal so we can try to reproduce it?

• An ASA 5505 maybe a remote client of DMVPN

  ASA5505 maybe a DMVPN remote client or should it be a router at all points.

  AFAIK DMVPN is supported only on the routers/IOS.

  http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps6658/data_sheet_c78-468520.html

  HTH

  Sangaré

  Pls rate helpful messages

• allow traffic through remote client

  Hi friends,

  I'll explain my setup.

  I have an asa in datacenter with the static ip address, then site Office also having static ip, these two sites are connected via VPN and I configured the remote client to the data center.

  workers of remote client needs to access the network of site office. It's my setup.

  the problem I faced is that remote workers they cannot access the site office network.but if I try to ping the ip vpn site office pool and then if I try

  the remote client, I can able to access the siteoffice of the remote client.

  Please provide me with the solutions experts

  I understand that you have the following topology:

  (1) Lan-to-Lan VPN between data center and site office

  (2) VPN Client that connects to the data center and here also join the site Office.

  There are a few things that need to be configured for the VPN Client to access the site office:

  On the ASA Data Center:

  -command "permit same-security-traffic intra-interface"

  -Tunnel of Split ACL must include the site LAN Office

  -Crypto ACL for LAN-to-LAN VPN must include the following:

  permit ip access list

  On the ASA site Office:

  -Crypto ACL for LAN-to-LAN VPN must include the following:

  permit ip access list

  -NAT exemption must include:

  permit ip access list

  Hope that helps.

• static ip address to the remote client asa 5500

  Hi all

  I am trying to configure static ip on the remote client side of the user, I use the following as an example doc, but I don't get the ip address which I am mentiong the user.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080a7afb2.shtml

  my version of the asa is 8.2 (1)

  Thank you

  Cyril

  Great to hear. Pls kindly marks the message as answered while others may learn from your post. Thank you...

• SCCM Remote Client - disconnect the PCoIP Session

  Hello

  We have a problem on virtual machines Windows XP 64-bit with SCCM remote client.

  When the user approved the request, PCoIP session closes. This is not the case on the Windows 7 virtual machines.

  I checked pcoip logs and that:

  04/08/2013, 11:36:40.416 > RC LVL:2: 0 MGMT_IMG: CODEC: change of State of CODEC_DISABLED to CODEC_DISABLED

  04/08/2013, 11:36:40.416 > LVL:2 RC: COMMON 0: TERA_PCOIP: session_evenement = TERA_MGMT_SYS_SESS_EVENT_RESET, disconnect the cause (0xfffffe0c)

  04/08/2013, 11:36:40.416 > LVL:2 RC: 0 SERVER: main server: called cb_notify_session_status (mask 0 x 10) with tera_disconnect_cause (0xfffffe0c)

  04/08/2013, 11:36:40.416 > LVL:2 RC: 0 SERVER: server: TERA_MGMT_SYS_SESS_EVENT_RESET cause of disconnection (0xfffffe0c).

  04/08/2013, 11:36:40.416 > LVL:1 RC: SERVER-501: map_tera_to_vdp_connection_result_code: tera unknown disconnect cause(-500)

  04/08/2013, 11:36:40.416 > LVL:1 RC:-501 SERVER: server: map_tera_to_agent_close_code() failed due to disconnection (0xfffffe0c). With the help of PCOIP_AGENT_CLOSE_CODE_BROKER_INITIATED

  04/08/2013, 11:36:40.416 > LVL:2 RC: 0 SERVER: connection_closed: code = 2.

  04/08/2013, 11:36:40.416 > RC LVL:1: 0 VGMAC: the Session Statistics: average TX = 0.116288 average RX = 0.0140269 (Mbit/s) Loss=0.00%/0.00% (R/T)

  04/08/2013, 11:36:40.416 > RC LVL:2: 0 MGMT_SYS: closing of the Session remotely!

  04/08/2013, 11:36:40.416 > LVL:2 RC: 0 MGMT_SYS: *.

  04/08/2013, 11:36:40.416 > LVL:2 RC: 0 MGMT_SYS: *.

  04/08/2013, 11:36:40.416 > LVL:2 RC: 0 MGMT_SYS: *.

  04/08/2013, 11:36:40.416 > LVL:2 RC: 0 MGMT_SYS: *.

  04/08/2013, 11:36:40.416 > LVL:2 RC: 0 SERVER: Server mailbox: MBX_SHUTDOWN with agent disconnection (0x0) reason code

  04/08/2013, 11:36:40.416 > LVL:2 RC: 0 SERVER: Server mailbox: stop the mailbox message loop

  04/08/2013, 11:36:40.416 > LVL:2 RC: 0 SERVER: backend: had completed the message of the application

  04/08/2013, 11:36:40.416 > LVL:2 RC: 0 SERVER: backend: output

  04/08/2013, 11:36:40.416 > LVL:2 RC: 0 SERVER: the Server Cleanup: kill pcoip with agent disconnect reason code (0) and wait

  04/08/2013, 11:36:40.416 > LVL:1 RC: SERVER 0: map_agent_to_tera: DISCONNECT_GENERIC-> TERA_DISCONNECT_CAUSE_HOST_BROKER_GENERIC

  04/08/2013, 11:36:40.416 > LVL:0 RC: 0 MGMT_SESS: tear down the session

  04/08/2013, 11:36:40.416 > RC LVL:2: 0 MGMT_VCHAN: VChanPluginExit: closing the plugin 'VMware_Server '.

  04/08/2013, 11:36:40.447 > RC LVL:2: 0 MGMT_VCHAN: VChanPluginExit: Plugin 'VMware_Server' is closed.

  04/08/2013, 11:36:40.447 > RC LVL:1: 0 MGMT_VCHAN: = > parted with success all plugins VChan

  04/08/2013, 11:36:40.447 > LVL:2 RC: 0 SERVER: the Server Cleanup: detachment inputdevtap

  04/08/2013, 11:36:40.447 > LVL:0 RC: EXTERN 0: input_devtap == > can't get the process token for the user.

  04/08/2013, 11:36:40.447 > LVL:2 RC: 0 SERVER: the Server Cleanup: closing of mailboxes

  04/08/2013, 11:36:40.447 > LVL:2 RC: 0 SERVER: the Server Cleanup: free copy of the argument

  04/08/2013, 11:36:40.447 > LVL:2 RC: 0 SERVER: the Server Cleanup: complete cleaning

  Hi Linjo,

  Seems, all my problems are related to the type of OS client!

  I will deploy Windows XP 32-bit or Windows 7 for VDI other sites.

  BR

• The ongoing saga of sleep prevents "an active remote client recently sent queries to this machine."

  It is that my PC won't sleep.

  When I disconnect the connection Wi - Fi laptop to my wife the sleep problem no is going.  When I connect the problem starts again immediately.

  I have clean starting twice on the laptop of woman to no effect (the problem).  Clean boot on my PC also had no effect.

  In the laptop my wife under Event Viewer/applications and Services Logs/Microsoft/Windows/NetworkProfile I see many event 4000, 4001, 10000, 10001.  These event IDS are associated with wait for Identification.

  Don't you think that these are the "...". recently sent queries...? »

  With Wireshark, I tried to find the "demand" for woman's cell phone to my PC.  I've done a few "capture" but I do not understand the info.  I don't know what I'm doing with Wireshark.

  I'd appreciate help without the sleep problem on my PC.

  Thank you

  Terry

  Thanks for the reply.

  I tried the suggestions in this article in the Knowledge Base, about a week ago.  No solution.

  However, it seems I have finally fixed.  I left my homegroup (my PC, no wife), restarted the PC, then restored and joined the homegroup.  The message "client remote active" stopped appearing and my PC now sleeps normally.

  I guess that there is a fault with the homegroup on my PC that caused the non-stop message 'customer remote active'.  Previously I ran MS Network convenience stores and home group - several times - but without success.

  I think that the problem is resolved.

  Terry

• SCCM 2012 (remote) client on Android Tablet

  Is it possible to use the SCCM client remotely to an Android Tablet?  I must be able to interact with the employee at the other end, as I do when I'm in the House (at the office on our spine businesses) using my SCCM client remotely from my office workstation. I don't want to use another application of third party if possible.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Determine the type and version of the remote client

  Hello

  We have a mixture of zero clients and downloaded Windows in our remote user base. Try to determine which are eaten and which (type of client, MAC, firmware, version build etc.) by having users is like herding cats.

  Is there a way to say to display log files or console which client is used to access view? We are on View 4.6.

  Thank you

  See if this is useful, VMware KB: information to view Office collection

• Remote client Tuxedo options/license

  Hello
  
  I need to build an application that uses a tuxedo service. So I really apreciate if you can guide me through the options available. I prefer to use java as a language, but since I can't use jolt, salt or WTC, I think my options should be on the C.
  
  Can I use java client with a java ORB that connects to tuxedo orb?
  
  The tuxedo server 9.0 version and cannot use the JOLT: (.)
  
  And on licenses, there is no option that is not required to purchase a license. If I just need to build an application client, here I paid for a tuxedo Server license?
  
  
  Thanks in advance.
  
  Edited by: user5744216 the dic / 10/2011 10:12

  Hello

  Tuxedo client licenses are mainly included in the Tuxedo Server license, i.e., Oracle does not separately allow customers. You can have an unlimited number of clients installed.

  If your Tuxedo application is a CORBA application, then you can use a Java ORB to connect to a remote server of Tuxedo CORBA. You will need to configure the ISL in your Tuxedo configuration, and then connect to Tuxedo using the Naming Service to interoperable CORBA provided by your Java ORB.

  If your Tuxedo application is an ATMI application, you can always use a Java CORBA client, but you would need to develop CORBA wrapper for your ATMI services services as normal ATMI services cannot be called directly from a CORBA Java client.

  You say that the Tuxedo server is version 9.0 (which should REALLY be updated at least 9.1) and cannot use jerk? I guess that's a limitation on your side as shaking can be used with all supported versions of Tuxedo.

  The easiest option is to use a client workstation Tuxedo, but he would have to write the client c.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• ARD can not see remote clients via VPN

  Hi all. I found not been able to find an answer to what works. I appreciate the help.

  I have two networks, home and office, be it online by a router in Time Machine. I set up a VPN server in the office. I can however connect with success at home and can go up to the servers and can control the computer server in ARD. But I don't see any other machines on the network of the company unless I enter their IP directly, and even then I can't control them. I can control the server, and it can see and control the other remote machines. If I'm in the office, I can see and control all machines on the network.

  The network router is set to distribute addresses 10.0.1.2 - 200. The home network is set to distribute addresses of 10.0.1.201 - 250. The VPN server has address 10.0.1.250 - 255.

  What Miss me? Thank you very much.

  for VPN works normally your networks must be in a different IP address ranges

  you have everything in 10.0.1 range

  for example the Office Network 10.0.1.xxx

  network servant 10.0.1.xx

  This is maybe the reason why you cannot control the machines.

  VPN requires the Remote LAN to be on a different subnet/ip range

  If they are no routing etc. can get screwed up like router/VPN cannot know where things are

  Try to change your home network to a range of ip address/subnet different example 192.168.1.xx

• Binds two ISP ASA to remote VPN Client to connect to instead of creating two profiles on the remote client

  Hello

  just a quick,

  TOPOLOGY

  ASA isps1 - 197.1.1.1 - outside

  ASA ISP2 - 196.1.1.1 - backup

  LAN IP - 192.168.202.100 - inside

  I have configured Tunnel on the interfaces (external and backup), but is to link both legs public to serve a thare as redundancy for vpn users and users of the vpn tunnel leave pointing inside IP whenever they want to establish vpn sssion, we want it to be one, so if an interface fails vpn users will not know , but he will try the second for the connection. instead of creating the profile for the two outside of the leg on the vpn client.

  is this possible?

  Hi Rammany.

  In your case, you have only an ASA that connects with 2 ISP in another segment IP... 196.x.x.x (Link1) & 197.x.x.x (Link2). What your condition is you want to have the VPN client who must be consulted with backup. If 196.x.x.x link fails, it should automatically take 197.x.x.x link. That too we should not have the config set in the VPN client backup server. You don have the possibility of having standby active also in asa single.

  I think n so it will work with your current design.

  This option is if your VPN client supports host name resolution (DNS). You can have the VPN created for both the public IP address share the same host name keeping the bond as the primary address 1 and 2 a secondary address. It will work alone.

  Hope someother experts in our forum can help you with that.

• Install of new problem-unable to connect to the server from a remote client DB.

  Hi experts,
  
  I am new to set up a server oracle so pls bear with me...
  
  I have install a db Server (11g on top of Oracle Linux 64 bit) home (192.168.1.90 static). I checked that db, listener are running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network, but the server is not reachable. I got a ping from client and the server using IP addresses and host names. I followed the following steps to troubleshoot but could not go beyond the step 3, the server on port 1521 telnet-ing. Can someone help me what I need to do to make the port # (1521) is accessible by the customer?
  
  
  1. check with the 'ping' using the IP ('ping 198.11.34.43'
  2. check with 'ping' using the DNS (for example "tnsping uranus")
  3. try telnet to the IP address on port 1521 (telnet 1.2.3.4 1521)
  4. check with "tnsping" using the TNS service name
  5 call SQL * more of the line command «sqlplus fred@flintstone» operating system If this does not work, make sure your receiver is the defined service of flintstone.
  6 sign - on to SQL * more and connect with the name TNS ('connect fred/flintstome@service_name'
  7 in SQL *, try a select table@remote_db_link
  
  Thank you very much in advance.

  Hello
  (1) problem can be because of the firewall. Please check if the firewall turned on for your environment
  (2) check sqlnet.ora, you can allow requests only from specific systems

  Thank you
  Krishna