Update CPU/MB, now WIN7 says he is not genuine and will not accept my registration code

Similar Questions

• I just downloaded windows 7 on my computer and now it says I do not have a card installed, network driver what should I do?

  I just downloaded windows 7 on my computer and now it says I do not have a card installed, network driver what should I do?

  If the computer is running XP or Vista, for example, before installing W7, it may mean that the manufacturer of the PC card or network did not have a driver for W7.

  Go to the site of the original manufacture of the PC (brand/model) support and see if they make an adapter for your specific model of W7. If they do download it, to get the right version IE 32 or 64-bit as needed. If the PC manufacturer doesn't provide one, try the website of the company that makes the actual adapter and see if they do.

  If you are unable to connect to the internet on this PC, you will need to download the driver on another PC and transfer it through via a USB stick or an SD card.

  Is there no driver W7 made for your specific PC and its adapter, then you may need to consider buying a replacement network card and use it.

• I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and restart

  Mr President, whenever I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and reboot... Here is the link to dupmp files https://onedrive.live.com/redir?resid=97d7886e9c3f12c6 mini! 104 & authkey =! AEE9bFVyH3uOKNg & ithint = % 2czip

  Hello

  Bugcheck 1000007E, {ffffffffc0000005, fffff8028a66f060, fffff8801b01b5c8, fffff8801b01ae00}

  WARNING: Unable to verify timestamp for ewusbwwan.sys
  ERROR: Module load completed but symbols can be loaded for ewusbwwan.sys
  Probably caused by: ewusbwwan.sys (ewusbwwan + 2bb5)

  ewusbwwan.sys dated 31/05/2011 driver Huawei Technologies Co.. Your USB dongle driver
  or a device attached to it.

  BugCheck C2, {b, fffff8029f4f8380, 0, fffff8029f4f8b90}

  WARNING: Unable to verify timestamp for c:\windows\system32\drivers\ewusbnet.sys
  ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\ewusbnet.sys
  Probably caused by: c:\windows\system32\drivers\ewusbnet.sys (ewusbnet + 2353)

  c:\windows\system32\drivers\ewusbnet.sys Ditto pilot.

  This driver update.

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  ========================================================

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. Updated BIOS, drivers of low level chipset and on-board major
  and drivers of separate devices (see methods of updating driver below).

  BiosVersion = F.03
  BiosReleaseDate = 07/09/2012
  SystemManufacturer = Hewlett-Packard
  SystemProductName = PC HP Pavilion Sleekbook 14
  Family = 103C_5335KV G = N L = CON B = HP S = PAV X = Null
  SystemVersion = 087F1000003B5900000310100
  SystemSKU = C0P30PA #ACJ
  BaseBoardManufacturer = Hewlett-Packard
  BaseBoardProduct = 18F9
  BaseBoardVersion = 82,12

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  -----------------------------------------------------------------------------------------------------

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names. (Also update BIOS and)
  low level chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  How to run the tool in Windows 7 Memory Diagnostics (and 8/8.1) - in Windows 8 8.1
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ======================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.

• When I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work.

  Original title: installation problem windows

  I recently had to reinstall windows for my pc that my HARD drive is dead and when I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work. Ive phone microsoft and they say, I have to buy a basic disk and then upgrade with the disk that has always worked for me? any suggestions?

  License upgrade and the key that's exactly right, used to upgrade a previous version (Vista, XP) for the version shown on the license (7).

  In order to use this key, you need to pre-install your o/s original eligible before moving to 7.

• Just updated, now Muse says it is not connected to the web

  Update V 7.3 Build 5 CL782274 Muse CC.   Now when I open Muse he says I need to connect to the internet, then says internet is not connected.   I'm obviously because I can contact Support.  What happens here?

  Please refer to this topic:

  http://forums.Adobe.com/message/5696986#5696986

  Thank you

  Sanjit

• Installation of updates on Vista now the printer works do not error USB001

  I have installed new drivers for vista now my Canon pixma ip4000 not work, I have updated the new driver and tried to install the drivers for Canon still nothing...

  can someone help please

  Hi Aarinder,

  Try reinstalling the drivers in the State of clean boot from the link provided below and check if the problem is resolved.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip4000#DriversAndSoftware

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 2: If the above condition step does not resolve the problem, try to perform a system restore to restore the work correctly, settings, to do this follow the instructions below:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. in the System Restore dialog box, click on choose a different restore point and then click Next.
  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  d. click Finish.

  Reference:

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Step 3:

  To find out what particular update triggered the mouse problem, disable automatic updates.

  Instead, install a patch at a time.

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
  2. in the left pane, click on change settings.
  3. Select "check for updates but let me choose whether to download and install them.
  4. click on OK.

  From the list of updates, check an update at the same time to download and install. Note the number of the KB article so that we know with certainty what update causes the problem. Post back with the KB article number so that we can take a call on the same.
   
  Recommended links for windows update:
   
  Activate the update or disable automatic
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-off
   
  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Been using Windows7 for 2010 now, he says it is not a genuine version

  Been using Windows7 for 2010 now, he says this isn't an authentic version how I resolve this issue as it has obviously been validated repeatedly since 2010

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Windows XP is saying that he must be turned on, but will not accept my activation code.

  I have a PC that works with Windows XP for a few years.  It was off for awhile and when turned on, he insisted to be reactivated and will not go forward with windows loading until it has been registered.  Facilities to connect to the internet would not work as it seems to insist on the use of a dial-up access (it doesn't have a modem) and does not connect to my home network which has my broadband connection.  When I tried to activate by using the telephone service, he said that it is impossible to validate my copy as it can be hacked.  It certainly is not hacked, because it is an OEM version that worked for many years.  He refered me to microsoft.com/genuine, but this page doesn't give any help on what to do in this situation.  What should I do now?

  original title: my activation code for Windows is rejected.

  Interesting - you used an a Dell recovery disk to install XP on a Medion computer.

  No wonder, that he does not want to know!

  Try using the product key update tool to change the key for that on your COA sticker.

  http://Windows.Microsoft.com/en-GB/Windows/help/genuine/product-key

• the new Win7 disc replacement does not accept the case key

  Our dv6 - 2173cl end is more the boot, the "freeze" while showing the wallpaper with the taskbar 'framework' as well as the Start button, the HP logo button and the Date/time.  Defective hard drives the check HP tools with 90772-50e656-xd0021(7? wrote down in a bit of a hurry, sorry)-6ou103 error code.  Since the reader would also not 'take' the restoration attepmts (so the HP tools) we thought that a new disc has been a given.  Fast forward...  Now with the new drive in and a new Win7 install (no recovery disk, yes we know) the facility does not accept the key from the sticker on the bottom of the case and Yes Win7 is Home Premium on old and new.  So now, what do we do to get active Windows?

  I found that if you enter the key during installation and enter the key during activation of this always accepts it. Always works for me when I do a clean install of Windows 7 on client computers.

• Login Yahoo mail says Firefox do not accept the cookies, but my option is as cookies - so what's the problem?

  My wife and I can not connect to our Yahoo email accounts (or, I suppose, our Yahoo account). Whenever we try, we get the message: "the browser you're using refuses to sign in (cookies rejected).

  However, my cookies in Firefox is: 1) accept cookies 2) accept cookies third party 3) keep cookies until they expire.

  There are a few days, I changed the cookie settings for 1) accept third-party cookies) 2 do not accept cookies 3) ask each time. I've also removed a lot of cookies I does not recognize or didn't want to. I did this because I was (and still am) having problems with a redirect virus.

  So if anyone has any suggestions as to what needs to make accessible e-mail still Yahoo, I would much appreciate their advice.

  I thank everyone for their advice in advance.

  Thank you 1 million.

  Hello gkerby1952, please try all the steps mentioned in the Web sites say cookies are blocked - pledge.

  In addition, if you encounter problems with redirection adware, I would recommend removing the Slick saves 2.6 & SoundFrost 3.7.0 extensions you have installed currently. also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.

  Remove a toolbar that has supported your Firefox or the homepage search
  Fix Firefox problems caused by malicious software

• I have updated to iOS to 9.3.1 now my screen is in portrait mode and will not change landscape when the phone is turned. Also, it just goes straight to voicemail without ringing on my end when people call. All I can say all the settings are correct. ideas

  Looks like my question may have been corrupted.

  I updated my phone to iOS 9.3.1 last night. Now all my incoming calls go directly to Voicemsil without ringing on my end. My sound and message settings appear normal for me. Also, my screen rotates out of sight from portrait to landscape view for photos FB etc...

  suggestions to solve problems?

  It seems that if you have the lock of portrait and do not disturb activated. Swipe up from the bottom of the screen to call the control center. Look at the two circular icons on the top right row. They are white? If so, tap on them to turn them off. One resembles a Crescent Moon, the other as an arrow in a circle with a padlock in the Center.

• My creative cloud is not updated... It says server is not responding, please try after some time (error code: 207)... Now the update

  Can I know how to fix this problem

  Hello Chai Liu Min,

  Please see the links given:

  https://helpx.Adobe.com/creative-cloud/kb/download-update-errors.html

  Error 207 to "install Adobe".

  You can also try another connection.

  It will be useful.

  Concerning

  Bianka Attre

• Update of the Firefox Flash 6.0 plugin installs only 50% of update. And then said: I have to close firefox. I close it and it says again he is running and will not update? Why?

  I'm trying to update my flash player plugin. Since mozilla says
  It's expired. I use firefox version 6.0 on a windows 7
  64 bit OS. I'm the normal adobe download and installation process. Don't other applications are running. I install the Update flash. He Initializes then 50%, he says to close mozilla firefox. I close and he always tells me that mozilla must be closed. I go to the Task Manager and mozilla is not currently running. The flash update will not continue he mozilla needs to close when it is already closed. Why? and how to fix this?

  Did you look for firefox.exe Task Manager process tab and plugin - container.exe? You must kill the firefox process and all processes of plugin-container you will find.

• Check for updates is greyed out & he says service is not not going enforcement when try to install updates.

  Original title: Vista SP2 (32 bit) is out of date.

  Vista SP2 (32 bit) is out of date.

  I think that all the settings are correct & even downloaded the Fixit tool from the Microsoft website (http://support.microsoft.com/kb/971058).  He says he works but it is not.

  Yet when I go to Windows Update, verification of updates is greyed out & he said that service is not running.  I have check the updates of Windows (wuauserv) service and it shows as running.  Has anyone any suggestions?

  Thanks in advance!

  Hi newdrive!
  Try this Microsoft KB Article is what helped me:
  http://support.Microsoft.com/kb/2509997
  Please come back if you need assistance
  Thank you!
  Makoi