Update disk on Tecra 8200

Similar Questions

• Update disk for Tecra A8

  Hello

  In my laptop model 014, common Tecra A8 # PTA83L - 02K HDD is Fujitsu 60 GB SATA (mode # MHV2060BH).
  I want to upgrade to 320/500 GB.

  Please suggest a replacement HARD drive.
  I can not know what HARD drive I need to purchase.

  Kind regards
  kannit

  Hello

  You can use any SATA 2.5 HARD disk since the SATA controller is not limited to a specific size of the drive HARD 250 GB or 500 GB even shouldn't be a big problem

  and cloning a HARD drive should also be possible.

• Update disk on Tecra Z40

  I want to buy Toshiba Tecra Z40-A1402 - 14 "- Core i7 4600U"
  This article has 128 GB SSD in this regard. Is it possible to install a regular hard drive on this ultrabook?
  Someone has an idea?

  Hello

  Is this the right specification of Tecra you want to buy?
  I see a 500 GB SATA HDD inside.

• Update disk on Tecra A7

  My TECRA A7 has a 100 GB hard drive, and I wonder if I can replace it for a larger.
  Is this possible and what should I do?

  Thanks for any help

  Hello

  Your Tecra has SATA HDD connector, so it shouldn't be a problem to use the HARD drive with a higher capacity.
  I put t know which one you want to use, but HARD drive, between 200 and 300 GB should be good enough for upgrade.

  What do you think of this?

• Update BIOS on Tecra 8200

  After you install Windows XP Home edition on the original 2000 I lost most of the public services.
  Have downloaded the new BIOS and utilities, etc., but can't install the BIOS because it requires to be loaded via floppy disk, and then press F12.

  * I don't have a floppy drive on this machine. How can I load the bios via CD, memory stick or another way? *

  There is a list of methods how to install the new bios [here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&FID=TRO0000000b07]

  I hope this helps!

• Tecra 8200: update BIOS: the utility is not available in V86 mode?

  I want to update bios for Tecra 8200, but is to show "the utility is not available in V86 mode."

  Please help me

  Hello

  James is quite right. To use this device there is only an update of the traditional BIOS available. If you want you can consult the FAQ update of the BIOS page. You can find it under http://www.toshiba-tro.de/gcc/biosinfo/index.html

  Good luck!

• Can I update my BIOS using a stick USB Mem on Tecra 8200

  I want to update BIOS for the last level v1.6.
  I don't have a floppy drive selectabay, just a DVD player.
  Now, it would take 3 DVD to do this I assume IE duty in the order of the day for more BIOS later.,.
  v1.4 then 1.5V and finally v1.6.

  Is the Board of Directors supported the start-up of a stick USB Mem, or a USB FDD.
  Any thoughts on the best way to do it.

  Is there a utility I could download and do it from windows...

  My system is a 820E. Tecra 8200 series.

  Thank you.

  I doubt that you can not do this.

  Toshiba page offers a trad BIOS update that can be updated by using only the FDD drive.

  Please check this update of the BIOS Toshiba how to document:
  [How update the BIOS on my Toshiba laptop and where can I get the latest version of the BIOS for my machine? | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07]

  Concerning

• Tecra 8200 Boot and install os!

  I have a tecra 8200, cd player no longer works, so I bought a new... The floppy driver has also been broken, but I just bought a new floppy driver external usb. Everything works fine on windows, but I want to reinstall my OS, but I can't boot from the external floppy drive or a cd player... How can I solve this problem? I edited my bios to boot from the floppy drive, cdrom and HDD, but it does not start, the cd is bootable etc... How can I solve this?

  Hey,.

  When you have changed the former in an ew reader, what was the same model or a better? As SD-R2002 or
  DVD PA3014E-1DVD player Kit
  PA3015U-1CDD 24 x CD-ROM Drive Kit II
  PA3068U - 1 CD 1 CD-R/RW Drive Kit
  PA3073E - 1 CD 2 CD-RW/DVD-ROM Drive Kit

  These disk are supported by the Tecra 8200 series. Another Selcet Bay drive can also adapt!

  It can also help to do a BIOS update unless the old one was not installed!

  Goodbye, TOK

• Upgrade HDD in Tecra 8200 problem

  I am trying to upgrade the hard drive in my Tecra 8200 10 GB to 30 GB. I have adapters to connect both drives old and new laptop on my desk, then used cloning software to copy content from the old disk to the new, leaving the data on the old. The old and the new disks are formatted in FAT32. When I put the new drive in the laptop, it is not recognized. The configuration of the BIOS screen says 'no drive '.

  I tried 2 different programs of cloning and tried the new disk using a USB external box connected to the laptop, with the original drive mounted in the laptop cloning. Still not good. I went through the whole thing with a 20 GB drive that I use in the external case, and it is not to be recognized. The 30 GB and 20 GB are recognized and can be read by, by 2 different computer, so I am prety sure that disks are OK. The 8200 BIOS does not recognize them and it doesn't seem to be a way to force the BIOS to detect the drives.

  I thought that the 8200 would support larger disks, but this isn't looking too good. I hope it's something obvious that I forgot.

  Any suggestion would be appreciated.

  Hello

  As I know your Tecra should be able to recognize the 30 GB HARD drive. Maybe update the BIOS may solve the problem. Please on Toshiba download page has the latest BIOS update available.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=EU

  Good bye

• Tecra 8200: After SP2 computer laptop installation keeps rebooting

  Hello.

  I am running Windows XP Pro in my Tecra 8200 and decided to install SP2 (oh error) now, whenever I turn it on I go as far as a blue screen with the following message
  STOP: c0000135 {Unable to locate component}
  This application has failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  After my laptop keeps restarting - boots - blue screen again. I have tried everything to connect to windows to uninstall SP2, but I can not connect.
  I tried to change the boot sequence (some ppl said that it was starting in LAN), I disabled the CPU Cache and L2 in the BIOS and still nothing. If I turn off reset on the failure of the system (as some other guy suggested) I just can't not anywhere either.

  Unfortunately, I do not have the boot floppies so I can not format the laptop.

  Now I know why that is happening, but the answers I get is to uninstall SP2, update the Bios, or to download patches, but I can't make one any of them because I can't get into windows, even in safe mode.

  Someone at - it ideas?

  Hi Hector.

  If you cannot start in safe mode, and then unfortunately mode your only real option is to reinstall your operating system to the original recovery disks.

  I think something went wrong during the installation of SP2 and this has led to the corruption of one or more of your system files.

  I also recommend that you take a full backup of your system before attempting to do a re-installation of SP2 so that you do not have to depend on start-up in Windows to regulate if necessary.

  Personally I take a picture full backup to an external hard drive using Norton Ghost before applying any big maintenance work on my own laptop.

  HTH

• Tecra 8200 identity?

  I want to update this NB as I barely had second hand. Info on the label does not seem to match what Tosh. ask me. Model number: PT8200E-05WQP-GR. P3 750 Mhz. I don't know whether it is an A2 A3 A8 etc etc. TA.

  Why don't you find your machine it's because you´re looking in the wrong section.
  Your machine is a little older and doesn´t belongs to the new generation of computers laptop toshiba. To find the drivers and BIOS update, you can choose archives in the driver download section.

  Here´s some brief description to find your machine in the drivers section:

  Go to the drivers download section and choose:
  "Product type"-> Archives
  'The family'-> Tecra-Archive
  'Series of products'-> Tecra 8xxx
  'Model'-> Tecra 8200
  'Short model number'-> PT820E

  Then choose the operating system where you need drivers. The update of the BIOS is included in the list of drivers.

  Welcome them

• Tecra 8200 upgrade?

  Hi it :-)

  I just bought used Tecra 8200 PIII850MHz 20 GB HARD drive, 256 MB of RAM and AI have a question - in theory, if I flashed the latest BIOS, what is the frequency of maximum CPU which can insertend in the laptop (PIII 1 will, work with it, or maybe just 1 GHz 2 GHz?)? What about HDD - will it work with 40 GB (or more) Toshiba HDD? The specs found on the Web from Toshiba site say about 30GB HDD, but I hope that they are a bit outdated ;-)

  Greetings to all
  Michael Kornacki

  Hi MicKor,

  the maximum frequency of the processor is 1.0 Ghz
  and the maximum of 30 GB HARD disk memory

  Good bye

• Tecra 8200 - works very well under Windows 98SE, but not on Windows 2000

  Hello

  I've updated my Tecra 8200 for Windows 98SE and Windows 2000.
  Windows 98SE, wireless connection works very well and I was able to access the internet through my SMC Barricade router.
  But on Windows 2000, this no longer works.
  The connection to the router is ok, but I am unable to connect to the internet or to the page web administration of the router.
  The Toshiba Wireless Client Manager provides the following information:
  Status:
  ------
  Connected to the network: SMC
  Connection: Excellent
  Access Point name:
  Channels: 2
  Encryption: on

  ----------- Warning ----------------
  Impossible to communicate with the AP.
  Please check the encryption and IRQ.

  Yet once, I insist on the fact that under Windows 98SE, everything worked well... an hour ago...

  I am running Windows 2000 SP4 with the latest updates.
  Could someone help?

  Thank you

  François

  Hello

  Thanks for the solution. I hope that the installation of Windows 2000 Service Pack 1 helped.

  Good bye

• Installing OS on Tecra 8200

  Hello world

  I really appreciate the help with installing OS on HD on Tecra 8200. The original HD crashed so I bought replacement HD to an add-in in the local newspaper. This disk should be formatted but otherwise empty. After I drag the drive into the Bay and put the power, "GRUB loading stage 1.5" appears on the screen and then any time the word "UBUNTU" and then a long message beginning with: "cannot start X server...". "etc. (probably something to do with Unix).

  My Tecra has no floppy drive, just DVD player and I can't find a way to make the machine begins to read the Windows 2000 installation CD in the DVD player (or perhaps the HD should be reformatted first but where to start?).

  Thanks a lot for any help or suggestion.
  [email protected]

  Hello

  to install Windows 2000 simply press the 'C' button when you see the Toshiba logo at startup. This button causes to boot from the cd and you will be able to install windows.

  Good weekend and if you have any questions...

  Welcome them

• Tecra 8200: Strange question if I try to install a DVD BURNER

  I have a Tecra 8200, Pentium III 750 mhz, 256 MB Ram, 60 GB hard drive.

  I buyed a new DVD player, especially a double layer RECORDER of DVD TOSHIBA SD-R6472 SLIMLINE 8 x DVD - RW for laptop in the CAR.

  I installed it on my totebook and this drive seems to be not recognized Windows XP (with service Pack 2).

  When I put on my laptop and start the boot Tecra 8200, the led of the DRIVE to continue but when starts to load windows xp this leads coming out and when the sistem of start of windows do not recognize ENGRAVER of DVD;

  Is there a method to recognize-DVD BURNER to windows, and I have to start looking for plug-and-play, after I have remove and replace the DVD burner.
  If I use this way to recognize the work of good DVD and Windows XP and everything works fine.

  The problem is that I do all this action to use this DVD burner.

  I try to install the other two-dvd burner but y at - it the same problem: windows don't recognize they must use my singolar procedure to use they; I try to update my bios to the latest version available and to update firmware of dvd writer but never.

  I ask a real help to those who can provide help for me.

  Thank you all!
  Grazie a tutti! :)

  CIAO

  Italy Dario

  Hello Dario

  Well, first of all, you must check the BIOS settings. As far as I know the configuration of the device must be set to the OS installer.
  Then it s advisable to reinstall the operating system. In this case, you must use the CD recovery or the original version of Microsoft Windows. All the necessary drivers, which you can download from the Toshiba site

  Good bye