Update error 80070057
I tried the upgrade to windows 7 Home premium to windows 10. He let me pass because the error code 80070057.
Martin
Please download a copy of the CheckSur and registers CheckSUR.persist in your OneDrive as shared files and post a link here.
Error code 80240016
http://Windows.Microsoft.com/en-GB/Windows7/Windows-Update-error-80240016
Tags: Windows
Similar Questions
-
IE9 Security update error 80070057 kb2829530
I am running Windows Vista Business 32-bit SP2 OS.
I got IE9 installed for about 2 years, but the last kb2829530 of security update installs not and gives error 80070057.
I can't find any information on the internet on this subject.
I tried many general suggestions on mistakes of update Windows such as disabling services like Windows update and WICKS, cleaning of their files and then turn power on. Nothing seemed to work.
I tried to uninstall IE9 completely but the uninstall fails with "unknown error."
Someone at - it suggestions of andy?
Ok...
Your reference to an "install IE9 update' was quite opaque & open to interpretation for me.
[If you couldn't uninstall IE9 still IE9 has been suddenly offered by Windows Update again, a ' wipe ' reload n ' was the best course of action IMHO.]
-
Error 80070057 on update.
You've just bought Windows 7 Edition home premium x 64 and use it as 3 days. I activated, but the updates stopped two days ofter. Now, there are 30 available updates, but I can not install them, because of the error 80070057. Why is that, what should I do? I use avast!, antivirus and windows firewall.
Ignore the update history for now. If an update is not listed in the installation of updates, it is not installed.
See if a reset fixes the problem:
How to reset the Windows Update components?
-Online skip the section to APPLY to; KB971058 access via IE8 32 bit only. Run the DEFAULT difficulty modes and AGGRESSIVE; reboot & test [1]
http://support.Microsoft.com/kb/971058~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list installed updates~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Cannot install updates to coees error 80070057, 8007371c, 80073712
have windows vista get these errors... best thing need to do to fix this code error thank you 8007.0057, 371 c, 3712
Windows Vista:
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80073712Description and the Windows Vista CheckSUR update for Windows Vista for x 64 systems
http://support.Microsoft.com/kb/947821
80070057 - ERROR_INVALID_PARAMETER 0 x - the parameter is incorrect.Error message when you try to install the Service Pack or Windows updates in Windows Server 2008 or Windows Vista: "ERROR_INVALID_PARAMETER(0x80070057)."
http://support.Microsoft.com/kb/2469239You must run the tool SURT and check the logs of other clues.
-
Windows Update, error 0 x 80070057
Separated from this thread.
I uninstalled Norton and after the fix he said it again: 0 x (2016-04-27-T-07_24_44A) 80070057, error Windows Update
How can you uninstall the problem as a knockout if they do not know it is the KB # s on as 200 and some?
Hello
Thanks for posting your question on the Microsoft community.
Thank you for details on the question and your efforts to resolve.
This problem can occur because corrupt Windows Update files or parameters.
Apart from the suggestions made by Gerry C J Cornell and ThrashZone, please refer to the suggestions of T. Kujala and marked as answer by Cloud_TS, Moderator February 13, 2014.
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/53a1f2ab-037b-438e-A690-00a0e745730d/Windows-7-update-error-0x80070057?Forum=w7itprogeneralNote: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7I hope this information helps.
Please let us know if you need more help.
Thank you
-
Windows Update error 0 x 80070057 (2016-05-07-T-08_42_59p)
Hello
I recently updated my computer with several updates (windows 7). After the updates have been installed, I had an error failed to set up. After you run the Microsoft patch recommended, some errors have been fixed except "Windows Update error 0 x 80070057 (2016-05-07-T-08_42_59p).
Can someone help me to fix it?
Thank you
BT
Hi Bonnie,.
Thank you for being part of the Microsoft Community.
Error code 0 x 80070057 means that the parameter is incorrect. I would ask that you can run the system update readiness tool and then check if it helps.
Check the integrity of the resources
The system update tool checks the integrity of the following resources:- Files that are located in the following directories:
- %SystemRoot%\Servicing\Packages
- %SystemRoot%\WinSxS\Manifests
Difficulty errors Windows Update using system update readiness tool
https://support.Microsoft.com/en-us/KB/947821#bookmark-CheckSUR
Please come back if you have problems with Windows in the future.
- Files that are located in the following directories:
-
Windows Update, error 0 x 80070057 (2015-11-11-T-08_10_22P)
I have about 2 GB of updates of windows that will not download. If I choose 1 or all updates, the status bar just stay at 0% downloaded. I used the wizard of Windows Update diagnostic thing and the results were:
Windows Update, error 0 x 80070057 (2015-11-11-T-08_10_22P) - not fixed
Registration for the service is missing or corrupt - fixed
Recent updates installation problems - fixed
Recent updates installation problems - fixed
Recent updates installation problems - fixed
After restarting windows updates always do not download.
I'm running Windows 7 64 service pack 1.
concerning
Hi Nico,
Thank you for viewing in Microsoft Community, we appreciate your interest for Windows 10.
As you can not upgrade to Windows 10 through the update, this issue could if explained by antivirus or corrupted software update Windows components.
I suggest that you follow the troubleshooting steps that are being provided by Andre Da Costa in the link below and check out them.
Reference: How-to: Troubleshoot Setup and stop common mistakes during the Installation of Windows 10
Section: 0 x 80070057
It will be useful. Reply to the post with a State updated with this issue, we will be happy to help you further.
-
Cannot install Windows updates: error code 80070057
Original title: error 80070057
I tried to install updates (58 at the present time)) and fail, I went through all the steps, mr fixit all. always failure error 80070057 H E L P
I tried to install updates (58 at the present time)) and fail, I went through all the steps, mr fixit all. always failure error 80070057 H E L P
There is not 'Sir' in 'FixIt '. ;-)
Check your date, time and time zone.
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner. Delete everything is found.
Reset.
Download (save) system update and install it. Choose the right one for you:
- All supported on the x 86 (32-bit) versions of Windows 7
- All supported based on x 64 (64-bit) versions of Windows 7
Let things run/fix.
Reset.
Try to update.
If it still fails, try the following:
Reset your Windows with this FixIt components update:
How to reset the Windows Update components?Reset.
Try to update.
If it still does not work, try this...
- Start an elevated command prompt.
- Run the following commands pressing on enter after each line:
net stop wuauserv
CD %SystemRoot%\System32
Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
net start wuauserv - Reset
- Try to update.
* Important * When you do this, the following problems occur:
- Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
- When you remove the Software Distribution folder, your download history is deleted.
- If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.
* Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.
STILL no? We have something to try...Use this FixIt:
How to get the latest version of the Windows Update AgentReset.
Save components WU:
- Start an elevated command prompt.
- Run the following commands pressing on enter after each line:
regsvr32 Jscript.dll
regsvr32 c:\windows\system32\wuapi.dll
regsvr32 c:\windows\system32\wuaueng.dll
Reset.
Try to update.
If it still does not work after that - repeat ONCE more that part...
Reset your Windows with this FixIt components update:
How to reset the Windows Update components?Reset.
Try to update.
Come back and let everyone know how you faired.
-
code error 80070057 the parameter is incorrect
Hello
I have a server with Windows server 2003. I have a problem when I try to add a new user role in a portal Application COM + system applications displays the following message:
An error caused while processing the last operation:
error 80070057 the parameter is incorrect.
System has been installed to update security for windows server 2003 recently. Is it possible to fix it, or maybe I need to uninstall the security updates?
Thanks in advance,
Kind regards
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
have had windows update problems for awhile now, 8 months or more
I did E-mail support instructions for a few weeks with the help of computer technology
Error 80070057
Asked to uninstall Kaspersky AV
same error
Tech found the personal firewall that still on the pc of the previous installation using msconfig and unintalled using a program uninstaller for ca
restarted and I have tried to update again and had error 8000ffff
This led the tech to run microsoft fixit in default mode
now, loops start mode PC rises to the small circular windows vista logo then says appliing update 3 3 50% sayes welcom and then stops, restarts, and loops on this subject.
Can I get the pc to boot wihtout install updates?
Tried safe mode and last good config known
Hello
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
or repost in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Update error, does not download after system upgrade
My laptop Sony all in one was running 8.1 and started running slow, so I did a refresh in assist mode, sony has. It did not work would not recover from the start that I did a complete system and it worked. However, now every time I try to update everything to go back to windows 8.1, im stuck at windows update is download, but it is not at all. I did windows update troubleshooting and 3 erros jumped to the top and 2 of the three say fixed, while one said detected, but not fixed. Why can I update, or better yet, how to find the files that I'm missing and re install? Help, please...!
Problems found Search for the missing or corrupt
filesCheck
for missing or corrupted filesDetectedFix missing or corrupt filesCompletedWindows Update error code
0 x 80070057(2014-03-09-T-01_51_39P)Windows
Update error 0 x 80070057(2014-03-09-T-01_51_39P)FixedStore data to reset Windows UpdateCompletedRecent installation problems
updatesProblems
installation of recent updatesFixedFix Windows UpdateCompletedPotential problems that have been verified Environment of Windows Update
the variables are incorrectWindows
Environment variable update are incorrectThere is no questionSome security settings are
missing or changedSome
security settings are missing or have been modifiedThere is no questionRegistration for the service is missing or damagedService
registration is missing or damagedThere is no questionWindows Update Services are not runningWindows
Update Services are not runningThere is no questionEncryption services components are not
registeredCryptographic
service components are not registeredThere is no questionProblems foundDetection
Details6Search for the missing or corrupt
filesDetectedFix missing or corrupt files CompletedOutput of the SFCOutput: Windows resource protection did not find no integrity
These violations.6Windows Update error code
0 x 80070057(2014-03-09-T-01_51_39P)FixedReset Windows Update data
storeCompletedDataStoreAndWULogFiles.zip18.77 MB Name of the file: DataStoreAndWULogFiles.zip 6Recent installation problems
updatesFixedFix Windows Update CompletedWindows repair
Update of services and
dependenciesPotential problems that have been verifiedDetails of detection Windows Update environment variables
are incorrectThere is no questionSome security settings are missing
or have been changedThere is no questionRegistration for the service is missing or
CorruptThere is no questionWindows Update services are not
runningThere is no questionEncryption services components
is not registeredThere is no questionDetails of detectionError reportRootCause: RC_DataStore Error code: 0 x 80070057 TimeDetected: 2014-03-09-T-01: 51:39 P Collected filesName of the file: CheckSURLog.cab The service statusProblem with the BITS service: the requested service has already been
has started. More help is available by typing NET HELPMSG
2182.Collection information Computer name: THEDARKNIGHT Version of Windows: 6.2Architecture: x 64Time: Sunday, March 9, 2014 01:50:24
PMPublisher detailsBackground Intelligent Transfer Service Find and solve problems that
can prevent work background downloadsPackage version: 1.2.1.20131113Publisher: Microsoft CorporationWindows Update Find and fix problems with
Windows UpdatePackage version: 8.1.1.20131113Publisher: Microsoft
CorporationTwhite1288,
I suggest you to see Help links and check if it helps.
Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057
http://support.Microsoft.com/kb/947821
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
TimeCapsule firmware update error, now defunct
I received notification of a firmware update for my TimeCapsule AirPort, then click it to start the update. He seems to have run the update and was himself reboot after the bar got to end state. He came back with a message 'update error occurred'. Now the airport is not at all in the AirPort Utility window. Tried unplugging the power at the airport to force a reboot. Tried the manual reset button, still not joy.ow I have a constant flashing orange.
Now, it's just an amber flashes continuously. And nothgin all appear in AirPort Utility window.
Thoughts?
Tried the manual reset button
Sorry, don't know what this means, because there are 3 types of resets.
Have you pressed the button of reset for 1 second and then release?
Do you have the reset button during 5-6 seconds and observe the led flashing quickly until you release the reset button?
Or something else?
Have you restarted your Mac?
-
Software for updates error checking
Software for updates error checking
What should I do?
There are several threads under microsoft support for update errors and also videos to youtube even try, based on the specific error you get. I had a similar experience yesterday and I had to use system restore.
BR
-
Hello
I have a laptop of old P750 for 2 months, after they need to do a restore to a disk upward, I now get the above error.
I then decided to do a cover of toshiba with a clean install and still get the same result of windows update is not not able to connect to the server.I tried everything I can find this error, including the verification of the proxy settings for WU, reset the proxy via CMD prompt settings.
I noticed something interesting while control validation using microsoft MGA diagnostic tool, where windows has been listed as a hat, but note some reports as:
Validation code: 0
LegitCheckControl: N/a, hr = 0 x 80070002
signed: n/a, hr = 0 x 80070002My understanding is the way to 0 x 80070002 he couldn't connect identical to WU or that files are missing.
I have rebuilt that recommended such c:\Windows\SoftwareDistribution records, turned off all firewall, removed antivirus / software malware but still no luck.
It seems funny how the same thing happens even after a clean drive toshiba recovery.
Any suggestions?
BL262000Hello
If you check Google and error code 80072EFD you will find many pages where you can find explanations why should be done about it.
It's typical Microsoft problem and the solution must be sought by Microsoft.
Have you checked
http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80072efd or http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-update-error-80072efd/398546d2-6b6d-47a0-b075-82d815fa9a8f? -
Satellite Pro L20-102 BIOS 1.3 update "error 151".
Hi all
I want to ask about the bios update 1.30 to 1.80. When I update ERROR 151?L20-PSL25E-00100UPL
Hello
I found information on the download page of the BIOS that 1.8 BIOS update is only for the models of the L20 series that contain "PSL2X", "PSL2Y" or "PSL2Z" in the model number.
Your device has a number of PSL25E. In this case the 1.8 BIOS is NOT compatible with your device!
The procedure to update with this version of BIOS may damage the motherboard.The latest compatible version of BIOS for your device is V1.3.
Please note: this important step for the update of the BIOS if you n t have serious problems on you laptop. The procedure for upgrading the BIOS is very risky, because as you know by now the procedure or incorrect BIOS may damage the motherboard!
Maybe you are looking for
-
How we prevent NoScript removal with update of Firefox or solve it now
Whenever I update firefox, NoScript is removed and I need to reinstall * AND * go through the nuisance and the nightmare of allowing or blocking * THE SAME SITES that I USE ALL THE TIME! * @@)#$ How do you prevent NoScript to be disabled with an upda
-
How can I find out what all the "others" are on my hard drive?
I'm trying to free up space, storage, there are so many other space of plug, but I'm not sure how to locate files to remove. Help
-
Safari won't open PDFs in preview
After viewing a pdf document in Safari, I would like to open in preview. Usually I do flying over the lower third of the screen until the dark bar with four icons (perform a zoom, zoom, open in preview, download), and then by clicking on the icon "op
-
So slow MacBook for about 10-15 minutes then better
I have a late 2008 Macbook, CPU Intel Core 2 Duo 2.4 Ghz, memory 2 GB 1067 MHz DDR3, NVIDIA GeForce 9400 M 256 MB graphics card Recently updated to the Version OS X El Capitan 10.11.2 - but was the problem before, so I don't think its caused by the l
-
Windows Defender definition updates won't install
I am running Vista Home Premium, 32-bit, SP2. From 16/11/09, definition updates #s 1.71.570.0, 700,0, 833.0, 1705.0 have failed to install. I tried to reinstall several times without success. All other definitions since that date have intstalled.