Update failed - Vista updates

Similar Questions

• Clip - device MTP failed - Vista does not recognize Clip

  When I connect to the PC, the Clip says 'connected' but says Vista MTP device failed.

  I have Media Player 11.  I also have the old firmware Sansa 11.  I would update to firmware if I could get Vista to see the Clip.

  Any ideas?

  Yes, force MSC mode.

  Unplug the machine and turn it off.

  Together the lock light.

  Press in and hold the Center button and connect to your computer (hold the Center button until it connects).

  Now you can update the firmware.

• WinHlp32 installation fails vista Home premium

  When you browse through the installation of WINHLP32.exe on my VISTA Home Premium SP2 installation research updates for awhile then concludes not valid for my system.

  I installed the X 86 version after removal of all prior downloads

  Downloaded to the desktop

  Started cold

  Execution of Setup and all combinations and it does the same thing every time.

  It seems that it is looking for some update it finds!

  Clues

  Thank you

  Thanks for the info. I should have realized admin was easily accessible.

  Most tellingly, it is that MS may send one on a wild goose chase!

  Let's not the message about the inability for my system.

  On a whim I checked if WINHLP32.exe was on my machine and what you know, its there and works.

  I have discovered some mistakes of not crirical on the audit of the system, but they can wait another day.

  SOooo. First Council must be check if winhlp32.exe has been downloaded, abd it works!

  So ignore the inappropriate if message is.

  Thank you all for your help

• Satellite A300-1MC - Webcam driver open fail - Vista

  "Driver Webcam open fail." My webcam has a month back. Have been in forums & took advice - nothing works.
  Cleaned disc and reloaded several times pilot. This is not satisfactory.
  Someone has to take RESPONSIBILITY.

  I need to know the CAUSE and a solution.

  Hello John, and welcome to the forum of Toshiba.
  Let us discuss responsibility a little later.

  Tell us first what model of laptop you have exactly, which operating system do you use and what have you tried to solve this problem.

• Help! Flash Player installation fails (Vista; Internet Explorer)

  I have problems installing Flash Player (14 I think - the installation program is called: install_flashplayer14x32ax_chrd_dn_awa_aih) on a laptop with Vista and IE. I'm PC illiterate, so don't know what version I have...

  The Installer seems to know what I have and choose which version to install? Is this fair?

  I get the performer or backup of the installer options, but everything I try, the installation seems to think it's worked, and I got to a browser's screen showing other things I might want to install. However, Flash Player does not appear to be installed, and the content does not, telling me that I need to install Flash Player.

  I noticed one thing is that the installation bar moves at a slow pace and then all of a sudden, the last section goes into a microsecond, as he is abandoned, but it goes then on this other window. I have Malwarebytes Pro is installed for the protection.

  Could it be prevent installation?

  I wish a notification if it has been, but get nothing...

  Oh, and I used uninstall to get rid of the previous versions, but I have still some Panel for Flash Player settings, if I put the Flash Player in the search box?

  Sorry if this sounds stupid, but even if I can fix it the motors and things, all PC stuff is somewhat a mystery so far...

  Thanks in advance.

  There is no need to uninstall the previous version of Flash Player; the installer must do that for you.

  Try to use these installers:

  • Flash Player ActiveX (Internet Explorer)
  • Flash Player plug-in (all other browsers)

• Windows updates continue to fail. : update for windows vista (KB2378111) security error code: 800719E4

  In particular windows security updates for example updating security for windows vista (KB2378111) error code: 800719E4. With a lot more updates, they continue to fail, but only a couple succeed. When starting my computer in general goes to screen installation of updates. He finished going through step 1 and 2, but never seems to complete step 3 and remains on full where for at least 5 minutes. Then shows that updates were not properly before. Restoration of the changes. This continues to happen frequently now, and after having tried to restart my computer or install a little at a time still does not solve the problem. Also, I tried to use the troubleshooting solutions but did not have much. Don't know what else to do?

  My laptop runs Windows Vista Home premium: service pack 1: 32-bit operating system type.

  0X800719E4 ERROR_LOG_FULL
  The log space is exhausted.

  Transaction for Windows Update logs may be in an inconsistent state.
  You can delete them by clicking the ORB start.
  In the search for cmd field type
  Right click on cmd.exe and select 'run as administrator '. Accept the UAC prompt.

  At the prompt, type in the below exactly as written, including spaces, pushing enter after each command

  CD /d %SystemRoot%\System32\SMI\Store\Machine
  attrib s h *.
  del *.blf
  del * .regtrans-ms
  output

  Restart the computer now and see if it can be updated.

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• Update KB971644 fails repeatedly to install on Vista 32 bit system

  Every day, I notified of an update recommended to my system, (update KB971644 in particular) and every day it fails to install. Sometimes I get an error message which is recommended to visit the homepage of Install Shield, but I get no response here. (the error code is no.-3). The update is only about 6 MB, and I know I have enough hard drive space. I tried to clear my cache, cutting off the firewall and even leave the virus protection software. Don't know what else to try to install this update! All other updates installed, and I have all the Vista service packs installed and running courses. Thank you.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You receive an error message when you install the update?

  Try to disable all non-Microsoft programs and try to install the update.

  Update KB971644 is the platform update for Windows Vista, it contains the following updated technologies:

  Windows Graphics, Imaging, and XPS library
  Windows Automation API
  Windows portable devices platform
  Ribbon Windows and Animation Manager library

  Updated Windows program malfunctions if none of the non-Microsoft programs interrupts the installation updates.

  If you want to install this update and then, try the steps below.

  Reset windows update components.

  To reset the windows update components visit the below link and click repair button / follow the steps to fix it yourself.

  http://support.Microsoft.com/kb/971058

  Now try to install KB971644 update from windows update.

  For more information visit http://support.microsoft.com/kb/971644

  You can check the link below.

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Vista Update Failed facilities, 643 error code

  I can't update or install anything. Whenever I try to update Windows, installation is running, and then gives an error of "some updates not installed. Code 643. Has encountered an unknown error. »

  If I try to update iTunes or other programs/applications, the installation runs through and then says "failed".

  I can download a "set-up", but when I try to run it, I get a message "unstall failed.

  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Updates Windows Vista fails

  Live Windows cannot update system updates

  * original title - Windows vista cannot make updates. Updates fail.__Once received a message with an error code to the windows registry *.

  I don't see what that has to do with the sending and receiving of mail with Microsoft Outlook.  See if anything here helps: http://support.microsoft.com/kb/906602. Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• Vista - Windows updates always fail

  I installed AVG anti virus whenever I try to install updates for my computer it always fails

  Tour of AVG and then try to install the updates.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• (KB2378111, 12.0 MB, published 12/10/10) for Windows Vista security update failed with error 800b0100.

  Update of security (KB2378111, 12.0 MB, published 12/10/10) for Win Vista failed with the error 800b0100. Failure of several attempts, power, played external parser M.S., downloaded System Update Readiness Tool, saved the file on the desktop to install proxy server disabled by bike. Nothing has worked.

  Start a help tickethttp://support.microsoft.com/common/international.aspx?rdpath=1&gprid=9860>

  See the section "How to get help" of http://support.microsoft.com/kb/2378111

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:https://support.microsoft.com/oas/default.aspx?gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  OPTION has:

  • 1. open IE 32-bit (only) to https://consumersecuritysupport.microsoft.com/

    2. click on security updates aren't installed properly

    3. on the resulting page, click CONTINUE

    4. Select an appropriate country and language, and then click CONTINUE

    5. click on the option support by PHONE or email.

    OPTION B:

    Start an email from Windows Update support incident request for free

    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

• Vista Home Edition SP2 update fails on reboot

  I tried to go through the SP2 Auto x 2 update and whenever it gets to a point where the system restarts, it freezes with:

  !! 0xc0190036! 940/99370 (certcli.dll) on the screen and I need to go through a restoration to bring back Windows.  Once I do this Windows, it works very well.  I have over 200 GB free on my disk.  It's Windows Vista Home edition 64-bit...

  Suggestions to make this upgrade work?

  Hello

  Run the update tool for Windows Vista system and follow the suggestion below. To run the tool, follow the link below.

  http://support.Microsoft.com/kb/947821/en-us

  As the auto update option to install Windows Vista Service pack 2 fails, you try to install the Service pack manually. Follow the link which will take you through the process.

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Note: Before you start to install the Service Pack, disable the security software installed on your computer, such as sometimes conflicts with the installation process. The security software again once installation is complete.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista - constantly fail all Office updates

  I am running Vista, whenever it comes to updates all updates relating to Office 2007 Microsoft show failed. any suggestions other than do it manually?

  Can be mistake would reveal her...  646?
   
  Things are easier to answer when they're repeated enough on the forums. ;-)

  (Even easier when the posters give some details about the details of their problem.)

  
  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates
  http://support.Microsoft.com/kb/2258121

   

  Also easier to find.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Unable to check the updates/updated to SP2... Vista home Edition? Attempts to load the update has failed as well. Source then help? __

  error code 80070005 update failed... deleted antivirus/firewall try to get the downloaded service.

  Hope that you have not been infected by some bad guys when you deleted the antivirus/firewall. Hope you had at least the Windows Firewall.

  In any case my notes to this forum.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates.

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  TaurArian [MVP] 2005-2011 - Update Services

• Vista - update security KB982381 fails with the error Code: 80071AA7

  Update Cumulative security for Internet Explorer 8 for Windows Vista still fails to install.  At the beginning I had 6 automatic updates which could not install (usually NOT a problem), so I individually installed each... reboot after each update.  Success on those.  I tried to update KB982381 more than 8 times without success.  I don't use IE as my browser.  My computer is constantly trying to install this and reboot... never works.  Don't know what to do.

  I did everything you suggested in the last email and I am sorry to say that the update has failed once again.   I use Mozilla Firefox as my browser, but I open IE * to run its difficulty etc.  I ran Windows Update (reset) in aggressive mode (what settings it reset?  I noticed when I went to the Control Panel, to look for updates and it listed that it is 'never' updates etc.).  When I did find updates sent to download, it came with one that was a failure and the other for Windows Defender.  This one has installed fine.  Let me know what I should try!  Thank you