Update has locked in sleep mode

Similar Questions

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

  Original title: most of the programs have disappeared from the start menu.

  Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

  Help please

  Hello

  Please see below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

  Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• Satellite Pro T130 - problems in sleep mode after you install the update wireless

  After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

  My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

  Please help us :-)

  You have installed the updates recommended by Tempro?
  You can send us you have installed versions?

  I assume that with the old versions you didn t have this problem?

• "Sleep" mode does not work after Windows Update

  After that a windows update 2 weeks ago my "mode" has been disabled. It is visible on the start menu, but is paler than other settings. I tried to restore my computer to before the update, but it says there is no date for the value. I've used the system restore and it worked fine. After the update my display settings have been changed also, but that was easily put back.

  Can anyone help? I saw other people with similar problems, but I find no answers that worked on my computer.

  If it's a Win7 computer, post here for appropriate assistance: http://social.answers.microsoft.com/Forums/en-US/w7performance/threads

  If this is a Vista computer, post here for appropriate assistance: http://social.answers.microsoft.com/Forums/en-US/vistaperformance/threads

  If it's a Windows XP computer, post here for appropriate assistance: http://social.answers.microsoft.com/Forums/en-US/xpperformance/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After update laptop graphic card driver HDMI port does not not work and sleep mode disappers

  Mr President, I have buy a new computer laptop 15-e017tx after the update of the graphics card.

  • HDMI port does not when I connect the laptop to my led tv
  • In the windows operating system sleep mode is dissappers.
  • On the start menu, the language is Hindi

  There are problems am faceing now. How to solve this problem? Short films screen attach also the problem when I open the catalyst control amd.

  Hello

  As mentioned above, restoring Windows 8 will allow:

  http://Windows.Microsoft.com/en-AU/Windows-8/restore-refresh-reset-PC

  Good luck.

• Windows update/microsoft update, access denied to programs, group policy has locked me out of my own darn computer programs!

  Update 2 automatic update was using me on windows and programs microsoft as well, no more! I get only updats on windows and I can't change the settings. I visit microsoft update and it tells me some _ like error 0 x 80070002 # I was at mr difficulty, vista, help and support, ive been online with microsoft online solution and they take me right back 2 where ive already been TO A DEAD END! Ive tried to reset components update has even deleted files off of the data store. Another problem is about reported problems & solutions-i can view all issues and report to them, but if I ever try to view something FORGET IT! I tried many things to fix this but I always get 'THE PAGE THAT YOU ARE TRYING to VIEW CANNOT BE DISPLAYED' quiet similar to internet explore cannot display this Web page. ALSO I can't start or stop a lot of the services on the group policy service, he won't let me do either one! Also, I use WINDOWS VISTA HOME PREMIUM 32-BIT OPERATING SYSTEM. Whenever I visit a solution center it tells me that I can't use solutions on windows vista I have to go to WINDOWS XP for advice. PLEASE HELP ME BEFORE I GO TO THE EXTREME AND USE A HAMMER, IT HAPPENED FOR ABOUT TWO MONTHS AND HIS STARTS TO BECOME REALLY BORING!

  Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup.

  [rest of the removed message]

• Laptop will not go into sleep mode

  Mode, Sony laptop Vaio VGN-FE855E
  Intel centrino Duo 1.67 Ghz
  2 GB RAM 667 Mhz Kingston
  120 GB HDD
  Mobile Intel 945 Express Chipset Family
  All the latest drivers as of April have been installed on the hardware.
  with Windows Vista SP1

  After receiving the last windows update for Windows Vista Premium, when you try to enter standby the computer hangs and will not enter sleep mode.
  Before reveiving updates he managed to switch mode sleep without problem and did every time. It will enter is no longer waiting for any means.
  I tried windows backup and Restore Center. After you select an older version before April 12, 2009, he was able to enter standby mode once more. Only after that the new updates, it was uninstalled had been relocated was not able to enter standby again.
  Initially, the computer starts to enter standby by closing the form. Then it goes weird after that, by the computer itself (which he never did before) inhibition and then it just hangs and the power light will not go to the flashing red indicating standby remains just green, who is running.
  The Hard drive is still spinning and accessing the hard drive very fast and light second every two seconds.
  When any key on the keyboard is hit the computer restores the sound itself and a sound through the speakers, which he has not already done. It then the screen turns on and brings the computer to lock screen / connection of the computer. I am able to log in and use normally.

  Hello, Justin

  Standby is activated in the Plan of high power Performance?

  You can check it out by going in the Power Options, click on change Plan under High Performance settings and check the computer put to sleep. If this option is enabled, click on change advanced power settings click on [+] Multimedia settings, when sharing media and change the setting to allow the computer to sleep.

  Let us know if that helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion g6t-2000 black screen & Sleep Mode problem

  Features of the laptop:
  Name: HP Pavilion g6t-2000 CTO Notebook

  CPU: Intel I3 - 2370 m 2.4 GHz, Intel HD 3000

  GPU: AMD Radeon HD m 7670

  OS: Windows 7 64-bit

  So over the past two weeks, I have been having a problem with my laptop after installation of an update to the beta with my GPU driver. Whenever I put my computer to sleep mode and turn on I get a black screen. The computer is turned on and set to lock the screen, so if I typed my password, it'll make the connection noise. Also, if I look at the right angle, I see a very dimmed screen which is there before I moved it in mode 'sleep'. Strangely when I put the laptop in hibernate mode and turn back on the screen is fine.

  Things I've tired:

  • Removed the beta driver and the GPU of HP drivers installed via the HP website
  • Update BIOS f.25 (latest driver)
  • Changed the power of options such as checking to see if hybrid sleep is turned off
  • Check the BIOS, it is very little options and none has to do with my problems. Only thing I can see on BIOS is to change the boot priority and enable and disable the little features like "fan always on / off", etc.
  • Running sfc/scannow

  On a side note, my laptop has been dropped about a week BEFORE the update to the beta GPU on a foot of my bed. "Sleep" mode was not affected by what I know. I was also reading autour on a power inverter and there may be possible that it has been damaged and if you think it is maybe it how can I test it? Thank you.

  I finally got the time to do a restore on my HP Pavilion laptop factory g6t-2000 settings and after doing a test with the AMD drivers, I discovered that drivers AMD were the problem holding my laptop to wake up full-screen mode 'sleep'. Thank you very much for your help AxshunJaxun.

  I recommend to not install the AMD drivers and once you do and that you do not have a restore point the only solution is a factory restore settings.

• Satellite Pro L650 doesn't get often from sleep mode

  Hi, I have a Satellite Pro L650, model No.: PSK1KA-00Y01E running Windows 7 64 bit.
  This laptop does not pick up often after mode "Eve".

  Can anyone offer suggestions on how to fix this?

  What's happening:
  When the computer sleeps, either by pressing the sleep button, or by closing the lid, this seems to work very well.
  After a minute or 2, I try to get the computer goes through the lid opening, or by pressing the power button. Sometimes, it works correctly.

  Most of the time the lights white led at the front displays for a few seconds and then started. Then, press us the power button and, often, the computer starts and says that Windows has been shut down incorrectly and then completely restarts for a new session.

  Sometimes the computer does not start, and it must cut off the power, then press the power button, which then crosses a full restart of the computer for a new session.

  A few weeks ago, we installed the latest version of the bios (2.20), and the problem persists.
  Is it a driver problem or a hardware problem?
  If it is a driver problem, what drivers should I try to install?

  Thank you
  Graham

  Hello

  > After a minute or 2, I try to get the computer goes through the lid opening, or by pressing the power button. Sometimes, it works correctly.
  This means that this problem is not always, but sometimes only and it of not possible to replicate this.
  In this case is not easy to find a good solution for this

  > We have installed the latest version of the bios (2.20) a few weeks ago, and the problem persists.
  > Is it a driver problem or a hardware problem?
  In my opinion, it could be a software problem. I mean that the problem could be related to corrupt the OS Win. Maybe the registry is confused upward. Usually, if the laptop is in hibernation / sleep mode, by pressing power button should the reactivation of the system in this mode and not shut down the laptop.
  So maybe this is s question OS

  If I understand your message, you have just updated the BIOS but didn't try the recovery procedure. Well well, for checking if the problem hardware or software s, you should get the phone to the factory settings.

• Satellite A65: Mouse freezes after the coming of sleep mode

  Hello!

  I'm having a problem with my laptop. I have the A65 with windows XP. The mouse works perfectly every time I close the lid of the computer goes into sleep mode that is ok, but when I open the cover from my session to resume the mouse is frozen. I can type and navigate with the keyboard mouse function but NNW.

  Someone at - it and an overview of this. Thank you

  Hello

  You mean USB mouse? What happens if you disconnect and reconnect the mouse to the USB port?
  You use the latest version of the BIOS? The A65 was designed for the American market, and you should check the Toshiba site us updates of BIOS. Maybe it helps

  By the way; Microsoft has published articles on the base of different useful knowledge about USB problems after sleep.
  Please check these docs and try the solutions:

  Keyboard USB or a USB mouse does not work when you wake your computer from mode ensures Windows XP
  Or
  After you resume your Windows XP computer using the power button, your USB mouse and USB keyboard may not work correctly

• Forces, "sleep" mode

  Hello, whenever someone calls me on Skype it forces my pc mode "sleep" and I can not wake him, so I have to restart. I recently installed 64-bit windows. I tried to update Skype, update my gpu driver, I even tried the regsvr32 jscript.dll regsvr32 vbscript.dll regsvr32 jscript9.dll fix. But nothing has worked. My specs are: processor: AMD Phenom II X 4 965 3.40 GHz processor. And my graphics card is the AMD Radeon HD7700 series. Thank you.

  Are you sure that what you consider a 'sleep mode' isn't really the computer freezes?

  In any case, you can try to uninstall the currently installed version of 6.18 and install Skype 6.14.0.104 version.

  You can use the provided here download link:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

• Tecra M5 does not return from sleep mode

  Sometimes my Tecra M5 won't wake up from sleep mode.
  The LCD does not turn, and hard drive works only for a second.
  I have for it to turn by pressing the power button / stop for a long time and then run again without my work that has not been saved.

  Other times I'm having problems with turning it off. Wondows disconnects and the PC is pending for a long time with LCD on - logging off XP screen.

  I have instaled videoprt.sys update and the latest BIOS 1.60

  Thanks for help.

  Hello

  I'm don't know if this will help, but try to install Microsoft Windows XP KB917332. You can find it on http://www.laptopvideo2go.com/drivers/ms_kbs/

  Please report the results!
  Good luck!

• IQ816 to crush when waking Sleep Mode

  This seems to be my last problem.  I had a virus.  Who cleaned up.  I also had problems with the Nvidia driver, so I've updated that.  I tried a repair of this problem by using the System File Checker.  Does not solve it.  Registry cleaner is not set, or it detects a problem.

  When I exit mode 'sleep', I get a blue screen with lots of words telling me that something has happened.  Then the pc restarts automatically.  Good boots.  But it should not be reset when you wake up from sleep mode.

  Anyone know what I should try?  I really want to do something drastic like a reinstall.  Not when he's running and soft start beyond this issue.

  This has been resolved.  It turns out that I had an infection bad rootkit here.  I had to go to a Vista forum and get special help to remove it.  I had one of the more recent variants TDL4 and he was causing with reboot leaving sleepmode the freezeups and slowdowns and crashes.  As soon as I cleaned up the infection, all who went.

  I have found that the infection by chance.  I had a strange task to complete my scheduled tasks.  And when I started looking into what it was, it leads to realize that I had a serious infection of TDL4.  You never know today.  Just happy I was able get this help and get rid of it.

• Satellite Pro A300 - after sleep mode the mouse no longer works

  Hi all

  Hope you can help me with this problem because I believe that I have tried everything I know and my next step is really formatting all the computer again and again without knowing if it will work this time, because that's what I just did, during the upgrade to win 7.

  I have 2 problems:

  When the computer goes into sleep mode and I start it backup - the mouse stops working, unless I have move to another usb port. I get a message on usb can run faster...

  Another problem is a program of freezing at this point as well, this program is Oracle JDeveloper, don't know if that has to do any?

  I tried to update ALL the drivers of toshibas webpage - these problems still...

  Help, please!

  Would rather not format again...!

  Christian

  Hello

  Can you please tell us which version of Windows 7, you have installed? I mean if you have 32-bit or 64-bit.

  Is it just that you use an external mouse?
  The touchpad works after sleep mode? If so I think that it s something wrong with the external mouse maybe.

  By the way: make sure that you use the latest version of the BIOS. You can find it on the page of Toshiba.

  And as for the question of the Oracle, I think you should communicate directly with Oracle support. ;)