Update LV2009 to LV2010 problem with ActiveX dll

Similar Questions

• I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll

  I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll, then when I fixed an error occurred -FSOUND-Sample_Load@16.  Also, ITunes says that there is a registry problem. We have inadvertantly deleted something or can other software recently installed it cause it was working fine until we installed a vivtar camera.

  Can provide you advice on how I can overcome this problem.

  Concerning

  original title: update windows

  Hello

  Method 1:

  I suggest you uninstall all third-party software and then try to perform the system restore.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 2:

  I also suggest to perform a system analysis File Checker.

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Post back with the results for further directions.

• My Windows XP has problems with shlwapi.dll

  My Windows XP has problems with shlwapi.dll and there are plenty of sites to download, but they all want money, why don't misrosoft not has an answer for this problem. When I try to update to internet explorer 6 to explore 8 then the error always pops up saying: you have a problem with shlawpi.dll and he can not continue... Very very frustrating.

  In general, it is not a good idea to download dll files.   See, for example, http://pcsupport.about.com/od/findtheproblem/qt/dll-download.htm

  If you explain more in detail what your problem is, including providing the full text of the error without paraphrase, it is likely that someone in the appropriate Microsoft Answers forum will be able to help.

  Because it seems that your problem is related to Internet Explorer, you are more likely to receive help if you post in the forum Internet Explorer, where there are already many threads dealing with issues of shlwapi.dll on IE: http://answers.microsoft.com/en-us/Search/Search?SearchTerm=shlwapi&CurrentScope.ForumName=ie&CurrentScope.Filter=&askingquestion=false

  If you look through some of these threads, you can find the answer to your question without further delay.  If not (or if you just want to watch), do not forget to include not only the text of the error message, but also the version of Windows XP, you have (Home, Pro, Media Center) and its service pack (start > run > winver > OK).

  And, based on this thread - with what seems to be your exact problem - also include responses to the following questions (there no answer, certainly because the OP has NOT provided to the request for information):

  1. what application or anti-virus security suite is installed and is your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  3 is installed WinXP SP3?

• Hi, I can't save all plunge on Icloud? This is the new update of softwer have problem with that?

  Hi, I can't save all plunge (6 IPhone / IPhone 5 / and my ipad on Icloud? is the new update of softwer have problem with that?)

  (1) disconnect from the iCloud and reconnect and try backup

  (2) backup on iTunes then restore the device to factory settings. Try the backup in iCloud. If it works, restore your device from the backup you made to iTubes

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Cannot open Quickbooks and also problems with Sophos & DLL

  Original title: Sophos & DLL

  I have the same problem as others with Sophos & DLL, but how to solve the problem that my Quickbooks does not open.

  Hello

  (1) what exactly is the problem that you are facing with Sophos & DLL?
  (2) what version of the Windows operating system is installed on the computer?
  (3) have you made recent changes to the computer before the show?
  (4) you get an error message?

  I suggest you to contact QuickBooks support for assistance.
  http://support.QuickBooks.Intuit.com/support/default.aspx
  

• How can I process the message saying that there is a problem with certCredProvider.dll?

  Whenever I turn on the computer, I get a window saying that there is a problem with C:\Windows\system32\certCredProvider.dll. What can I do?

  Hi JKittleson,

  1. What is the exact error message?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 provided in the above article.

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Let us know the results.

• Recent update is causing a problem with style on the leaves of masters

  Hello

  I've just updated Muse and I have another question with a master style sheet font and paragraph styles.

  
  

  The homepage looks like which is as it should be.  It has its own master page
  

  

  The other pages of the site look like this (see below) - the school text logo has been lost, the two missing buttons and the footer text of page is now black and not white and also is not justified and not centered but this arises out of the same master page.

  The only page that keeps the styling is the homepage.

  I tried to remove the text and styles of text by default re-adding, change - the only option would be to remove the main master page which I do not if it can be helped.

  

  I had this problem with the last update, but got around it by changing the default text styles - but that does not work now.

  I have 20 + sites set up like that.  I don't want to put hours of work into the sorting issues if it can be helped.

  Any information relating to this issue would be helpful

  Thank you

  
  Simon

  Hi Simon,.

  Please try to turn off 'IBE' (aka of editing in the browser) in the Panel "Advanced" dialog "Properties of the Site" within the Muse and the re - publish and check if that corrects the problem, the cause is something that we are aware and working on a fix for.

  Kind regards

  _Ankush

• Updated unknown perhaps caused problem with Outlook links

  Unable to open a link in Outlook, "restrictions in place, contact system administrator" I'm the only user on this computer

  I have this computer & (perpetually) logged as administrator. I was told of an update created this problem & I would like to stop it. In addition, a required JAVA update must be installed, operation failed, the error message says that it had to be wound.

  * Title *.
  I was told of an update that caused my problems, but I don't know that we could do.

  See http://www.slipstick.com/problems/link_restrict.htm, especially http://www.slipstick.com/problems/link_restrict.htm#reg2 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems with LZ32.dll

  I get a message "C:\Windows\system32\LZ32.dll is not designed to run on Windows or it contains an error." when I reinstall McAfee to the point where starts the part of virus scanning. The rest of the McAfee product installs successfully, but it leaves me without virus protection. I had the same result with many trials to uninstall and reinstall McAfee. The people of McAfee did not all the solutions for this specific problem. I have McAfee since almost a year before the virus protection suddenly stopped working.

  I also searched the Microsoft Knowledge Base. Although I found some mention of LZ32.dll, I have found no solution. Is it possible to repair or replace LZ32.dll?

  I use a Dell Inspiron 1720 with Windows Vista Home Premium laptop.

  Hello cke.

  Take a look at this link: http://www.dll-files.com/dllindex/pop.php?lz32 to reinstall this dll file.  I suggest also running sfc/scannow link:

  http://support.Microsoft.com/kb/929833. Also download MalwareBytes link: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572

  .html? tag = mncol install, update, and then do a scan of your system to make sure that it is indeed clean.  Let us know if this helps you. Make it a great day!

  "In the end, the love you take, is equal to the Love You Make"

• Download windows 8.1 update to correct the problem with compablity with discs for WP - 4540 printer.

  HP Pavilion TouchSmart 23All all-in-one, Windows 8.1. After you download the Windows 8.1 update, the problem is the computer will not Unzip.exec program to fix my problem.

  Yes, once you have downloaded the latest version 8.1 of windows it fixed compatibility with readers for the printer Epson WP-4540. It seems that you need to download windows 8.1 whenever Microsoft updates windows 8.1. Microsoft adds new software for the devices and programs. My Hp computer has windows 8 and I had to upgrade to 8.1 windows. Then I had to download the latest version of windows 8.1. And this corrected the problem.

• Problem with ActiveX / Excel / LV7.1 in the program who has worked on an old installation of LV7.1...

  Hello

  I have a LV7.1 program that worked when ran on an old installation of LV7.1.

  I installed Office XP and LV7.1 and you can open the program without any problem.  After the opening I ctrl + shift + click on the run button to force the recompilation and the arrow becomes broken.

  All the mistakes I found are the same: invoke node contains terminal unwired or bad.

  Here is a screenshot of one of the erroneous block diagrams.  I hope that the error is recognizable.

  Only two issues I can think of are:

  1. I'm running Windows 7 - maybe the ActiveX does not work the same way?  I'm currently installing Windows XP to see if this corrects the problem.

  2. perhaps, there was an Office toolkit or something used with LV7.1 to create this program?  If so, any ideas on what it was and where I can get hold of it?

  Thank you

  Dave

  

  I suppose that the node to invoke in the picture is the node throwing the error.  Have you tried right-clicking on the refnum automation on the front panel control and a link to the ActiveX component.  If this solves the problem, it's probably the version of changing object model.

  Good luck!

  -Bob

• Access user (UAC) shield appears on a large number of my programs now after Windows Update download and cause problems with some programs, no one knows how to fix this? (Windows 7) (Windows Update post a coupe of weeks)

  Hello

  Windows Update recently made a lot of downloads on my computer about two weeks ago (I run it automatically and it works usually weekly) and he has made some changes to my system that create errors or difficulties with certain programs. The shield of the UAC is now appearing on many more programs for some reason any and now I'm a guest whenever a program is available. which is also appear on my AntiVirus program. Action Center flag appears almost every day now with warnings saying that my AntiVirus program and spyware is off (not sure if this is related to the UAC shield), but when I check my AntiVirus program everything works and after access; the flag of the Action Center shows while all right. Nobody knows how to solve this problem and get rid of the ecu of the UAC on programs (or at least some of them I want to be invited on)? Any help would be greatly appreciated. Thank you

  I'm sure I've upgraded to Vista SP2, but not absolute, I can't find a lot of information in the case of the newspapers with the service pack level... only vista combined with some process is perceptible. I bought July ' 09 new and it came pre-installed with Vista on it. I think this is the tool I used to remove McAfee on this; It also came with Norton as an alternative option and both have been removed using their tools to uninstall BitDefender installation instructions walked me through the location and the removal of two of them before installing BitDefender on the computer. My user account is configured as an administrator, but when I right click on programs with the shield of the UAC on them, I'm not running as an administrator. The UAC slider is set at the 2nd ranked (by default); but I do not know how it was listed previous, I wondered about moving down one notch (but he advises not and I don't want to spoil anything).

• Applications crashing - problems with urlmon.dll

  Many applications "has encountered a problem and needs to close" message at startup. First noticed with the Flash plugin, but now in Fireworks, Dreamweaver, Internet Explorer, Flash, all affected. Seen a similar problem on these forums and instructions followed to reregister the urlmon.dll that is mentioned in all the error messages. Successfully re-entered the .dll, but problems persist.

  Hello

  ·        When you encounter this error message, at random, or whenever you try to open any application?

  ·        Since when are you facing this problem?

  ·        Remember to make any change to the system?

  ·        What is the exact error that you are experiencing?

  I suggest you follow the steps mentioned below.

   

  Method 1:

  I suggest opening the applications in safe mode with network and check if the problem persists. Follow the steps mentioned below.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode with networking from the list and press ENTER.

  Method 2:

  I suggest you todo a SFC scan. Of file system (CFS) when checking that all the Windows XP system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  d. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  e. audit % complete.

  f. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 3:

  If the problem started recently then, I suggest you do a system restore to the point when the system worked very well and see if the problem is resolved. Follow the steps mentioned below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Problems with Hal.dll recognizing multicores after installation of the motherboard

  I'm new to these forums, so I don't know exactly where this issue will...

  So here's the problem: I just replaced my jacked up Intel motherboard with a new ASUS P5G41-M LX2/GB. Before, in my device manager, it looks like "ACPI Multiprocessor" or something along that line, but now, under computer, it just says: "Standard PC". In addition, the "processor" tab does not exist, disappeared somewhere in limbo to replace the motherboard. My taskmanager would simply say that there is a kernel, and not both (and don't ask me to click on the ' show one graph per CPU ", it does not work). When I check my Hal.dll file, instead of saying that Halmacpi.dll was original, I would say it was "hal.dll", the Standard PC. Same thing for the other knrl.exe files. I really don't want to wipe my HD with a system reinstall, because 1. I don't want to lose one of the gigantic piles of stuff, that I worked on the computer and 2. I lost my XP Professional (but has the home edition for some reason any) CD. If you guys need my characteristics:

  ASUS P5G41-M LX2/GB motherboard

  Intel Core 2 Duo E4300 1.8 GHZ

  Windows XP Professional

  NVIDIA GeForce G210 1 GB

  2.0 GB DDR2 RAM

  You have loaded all of the drivers that came with the new MB? Windows should be the CPU as being a multi-core, as soon as it recognizes the new chipset drivers.

  SC Tom
  -There is no such thing as TMI if you request technical support.