Update my RAM in my MacBook5, 1 (end of 2008)

Similar Questions

• Can I update the graphics card in my iMac end 2012?

  I am able to update the graphics card in my iMac end 2012? I know that this is not a gaming computer, but I want to be able to play low end games. Is this possible?

  # You don't have a 'card' in this model. Starting with 2012 models graphics hardware was inseparable and soldered to the logic board. Looks like this:

  

  {image from iFixit.com}

  Small bumps under the person holds the heat sink are all your gfx hardware.

• Update of RAM for Satellite Pro 6100

  Hello

  What type of RAM is supported by the Satellite Pro 6100.
  I need to update some RAM.

  Thank you much for the help.

  How about this:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6179&ft=m&St=3

  You can use the PC2100 200 pin memory (266 MHz) DDR SODIMM modules.

  Best regards

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• I've updated my Ram in my Acer Aspire 5532 3 GB to 4 GB and it shows that I use only 2 GB and I have an empty slot

  I've updated my Ram in my 5532 Acer Aspire from 3 GB to 4 GB and
  When I run a check on my computer using my Norton 360 it shows
  I have 2 GB and I have an empty slot for the ram, but I have a 2 GB
  in it. What can I do about it? How should I do?

  Make sure that the RAM module is installed correctly.

  If you are running Windows 7 32 bit, you can recognize 3.2 GB of RAM.

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

• Update of RAM and hard drive for Compaq 6710 b

  Hey guys,.

  I had Compaq 6710 b and I'll update my Ram and HARD drive on it with these (link here)

  On the system view, it says memory: 1.99 Gb and the Crucial site gives these details:

  Maximum memory: 4 GB
  Slots: 2

  But I looked under the hood of the ram and only thing I saw was a simple location with stick of 1 GB (below Sorry for bad quality and light photos)

  http://i.imgur.com/F0MKO.jpg

  http://i.imgur.com/VgNGy.jpg

  http://i.imgur.com/0TCci.jpg

  So then it just a single cell phone location? And I can buy a 1 x 4 GB DDR2 ram stick?

  Thank you

  Hello

  The second site should be under the keyboard. The following book tells you where and how to access:

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02834030/c02834030.PDF

  Kind regards.

• Best OS for a MacbookPro, end of 2008?

  What is the best OS for a MacbookPro, end of 2008?

  It depends on your use.

  For OSX 1088 and earlier browsers are is more updated to fix security vulnerabilities

  The onver of Mavericks and later versions are still.

  You Mac can run and including El Capitan, but not of Sierra.

  Mavericks, Yosemite and El Capitan is not in the Mac App Store. If you previously download them you can always redownload them via the purchase of the Mac App Store

  You can buy codes to download for Lion and Mountain Lion

• Windows Update will not install the hotfix on Windows Server 2008 R2 Service Pack 1 KB3122648

  Hello

  I tried several times to install "MS16-019: Description of the update of security for .NET Framework 3.5.1 in Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1" on a Windows Server 2008 R2, running Service Pack 1

  Windows Update has always ends with 'Failure' / has encountered an unknown error. Code 80073712

  The convenience store has not solved it either.

  The server is not really exposed to 'outside' as such, runs in a local network, regular, small; but sometimes, a web browser may be in use.

  Is there anything that can / should be done here to remedy the failure of the installation? Or free time and even not to worry about this?

  It would be great to have a few strong indications here. Thank you!

  System File Checker shows errors that are likely to cause problems with Windows Update. I would like to reinstall Windows Server 2008. That said, I have no direct experience of Windows Server 2008, so I'm not really able to help you.

  The Microsoft Community Forums are intended to provide support in hand to hand for users of Microsoft products. These products are not Windows Server 2008. You can request additional assistance through the TechNet forums:
  https://social.technet.Microsoft.com/forums/en-us/home

• End of 2008 Mac SSD & RAM Upgrade

  Hi all

  I have a Macbook 13-inch, aluminum, late 2008. This is the 2 GHz Intel Core 2 Duo, with 2x2gb DDR3 1067 MHz Kington.

  I'm currently under OSX 10.9.5. My Version of boot ROM: MB51.007D.B03.

  I would like to change the current drive with a 512 GB SSD Crucial. Someone of you have encountered problems with SSD Crucial on this particular Mac?

  When I initially swapped to the Kington 2 GB RAM, I read that 4 GB is the max for this model at this time. Recently, I did some more research and found 8 GB might be supported if you a particular firmware. http://blog.MacSales.com/9102-secret-firmware-lets-late-08-MacBooks-use-8gb

  Im looking at buying Crucial 8 GB Kit (2 x 4 GB) DDR3 - 1066 SODIMM memory for Mac. http://www.crucial.com/USA/en/ct2k4g3s1067m

  I've read some people have had problems with 2 x 4 GB and used a config 1x2GB and 1x4Go. However, the post is about 3-4 years.

  Once I update to SSDS and the Rams I intend to update the current firmware. Should I face any problem as soon as I update to El legend with the Rams and the SSD upgrade?

  I appreciate all the comments.

  Mike

  There is no problem to occur as far as I understand your plan except that it is much more fast MacBook Pro you expect!

  You should get 2.5 external HDD Enclosure also inches so that you can make drive bootable with Carbon Copy clone or SuperDuper clone!

• Use of very high ram of the Mac mini end of 2012 after startup

  Hello my name is Ogi.Recently I have problem with my mac mini 2012.I end had a problem starting, so I used the startup, says apple. This problem has been resolved. But then another problem showed. Now, after I turn my mac mini on when I'll be on the desk I noticed that my mac is really slow. Then I open the activity monitor and watched. Wow 3.50 GB of ram used off 4. and I have not any startup programs. Now, so my mac is pretty useless. And btw, before when I started my mac I got 2.50 GB used and free 2.50, it is normal. Help, please!

  Thanks in advance

  When you use a memory

  Run and view the results here so that we know more about your configuration.

  EtreCheck

  From Mavericks, OSX tries to use all of the memory. Memory is not actively used is used to cache of files that may be needed.

• Acer Aspire R7 update - 571 RAM memory

  I have an Acer Aspire R7-571. On the card it says that the RAM can be extended up to 12 GB of RAM. I can still put 16 Meg RAM? Would it be more useful or would that be a problem? Right now I have 2 x 4 GB. Thank you

  First of all, you shouldn't need more than 8 GB total unless you do something REMARKABLY memory-intensive. My high-end desktop computer has 8 GB and it would be cheap and easy for me to change that to 16 GB, but it is simply not worth it. 8GB is fine for 98% of the population, if your uses include office, even high-end navigation on Internet or games.

  If YOU really need more than 8 GB, I think that you will be limited to 12 GB. On the R7, 4 GB tends to be soldered on the motherboard. You can replace your other 4 GB SODIMM with a 8GB SODIMM for 12GB total.

  You can always get a torx screwdriver and open it to look.

  But you should be fine with 8.

  If you are looking for a performance boost, according to this Factsheet you linked, the R7-571 in your country does understand not all SSD. You should have a port empty MSATA that you can use with an MSATA SSD. Pass your windows the 1 TB HDD for an MSATA SSD will make much more sensitive.

• problem updating SP3 after a reboot at the end of the update process, IE8 will not start

  I have no problem updated from sp2 to sp3. However after a reboot at the end of the update process, IE8 will not hold. When I click on ie, computer absolutely crashes. Help, please

  Restart your computer and if restart is ok are not trying to run IE8. Go to add and remove and remove IE8 and your computer will be re-established on IE7.  If all is ok so far restart your computer once more and if everything is ok at this point you can download IE8 again.

• After update my ram, video lag is terrible

  original title: what happened to my computer?

  Before this happened, I can run Maplestory and AVA and blackshot, all other games very well, so today I went shopping and I bought 4GB Ram, I took my course 512 MB ram and installed 4 GB, then I went home and installed it, no problem, then I have on my com and saw a new graphics driver nvidia site update nvidia official suddenly, I installed later, when I play my games (written above), all it shifted, internet lag no but graphic offset... Maple very lag, especially FPS(shooting games), lag too, graphic offset. I really need help on what to do, until I updated the driver and improved my ram, everything was fine, I upgraded my ram because I wanted him to be able to multitask and support the better games.oh yes and no lag on surf n web browsing.

  My com features: Windows XP Professional (5.1, build 2600) 32-bit
  system model: DP965LT (I use ddr2)
  BIOS: default to the system bios
  Processor: Intel (r) Pentium (r) D CPU 3 .00GHz (2 CPUs)
  memory: 3582 MB of ram
  DirectX 9 .0c
  your help is appreciated!

  I use Nvidia Geforce GT 430

  Have you used this one:
  http://www.nvidia.com/object/WinXP-285.58-WHQL-driver.html
  I ask because the most recent driver is BETA:
  http://www.GeForce.com/drivers/results/40024
  (I would stay away from beta!)

• Windows Update just turns and turns, seemingly without end

  A week previously, Windows Update seems to stop working on my laptop. It seems finished reviewing the updates for my Windows Vista, but just turns and turns and turns. Before that, it took 6 minutes or less to check updates and let me know if there is. If it has been downloaded an update, he'd let me know its size and how long it would take. Anyone know what is happening?

  Hi slipfoot:

  Carefully read the step-by-step instructions posted on 16 June 2016 wire m #l's updates does not, he has been looking for updates for hours before attempting to install the package of standalone update (.msu file). These instructions are based on the workaround of Dalai to http://wu.krelay.de/en/ , but have additional tips to avoid problems like the one you described. Make sure you try the following...

  Hi slipfoot:

  Just an info Microsoft MVP Woody Leonhard today posted an entry in his blog of InfoWorld Woody on Windows called 2 easy steps to speed up Windows 7 update scans which also includes detailed instructions for the use of circumvention of Dalai to http://wu.krelay.de/en/.  Woody's workaround for Dalai to speed up Windows Update as well Win 7 SP1 and SP2 for Vista users.

  Today, it is Patch Tuesday of August 2016, so don't forget to check the page Web of Dalai tonight to see if it has revised its list of five Windows kernel mode driver (Win32K.sys) updates which should be pre-installed for faster Windows updates if these five updates are missing from your system.  I can not confirm yet, but preliminary information would indicate that the KB3168965 of the last month has been replaced by KB3177725 (MS16-098: a security update for the Windows Kernel-Mode drivers: 9 August 2016).

  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0 * NIS v22.7.0.76 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• Looking to update my RAM 8 GB, what should I buy?

  It is the laptop that I recently bought for me keel while I build a desktop computer in the coming months, my last laptop hard drive and grilled graphics card. Search for upgrading the RAM from 4 GB to 8 GB skinny, but I'm not sure what I should buy or if I can still pass the RAM at all. I did some research through the HP guide to upgrade memory, but it is very general. Very grateful for any help.

  HP - laptop Pavilion 17.3 "- memory of 4 GB - 750 GB HDD"

  D8X74UA #ABA

  List of Best Buy

  http://www.bestbuybusiness.com/bbfb/en/us/adirect/BestBuy;JSESSIONID=BB68C3D7F6AEFB3F6984D688FCF9CFF...

  Just the specs

  http://support.HP.com/us-en/document/c03735562

  Update of the page mentioned memory

  http://support.HP.com/us-en/document/c00820047

  Hello

  You can't go wrong with the following:

  http://www.crucial.com/upgrade/HP-memory/Pavilion+G7-models.html

  Good luck.