Update of Lightroom CC November 2015: import format is back to normal, but after the first import, now it shows not all pictures on my card

Similar Questions

• I've recently updated to CC 2015.2.1 but is still worse than Programstart 2.0 is normal, but after the forst in a few clicks it freezes and blocks. And what Adobe application support is worthless! They expect their customers to search, study and solve the

  I've recently updated to CC 2015.2.1 but is still worse than Programstart 2.0 is normal, but after the forst in a few clicks it freezes and blocks. And what Adobe application support is worthless! They expect their customers to search, study and solve their problems themselves instead of giving true and good customer. The availability of their telephone support is a bad joke and there is no telephone assistance service, that I could write my problem... Is this the way to treat customers who actually pay a lot of money for the product?

  I suggest you to please back in Lightroom 2015.1.1 and please wait for a new update which should fix most of the issues.
  Rear roller Article: Instructions to restore an earlier version of update

• ICH habe nach dem last Update von Lightroom 6 nach dem import RAW-Dateien der schwierigkeiten. Die Bildansichten werden alle ausgeschwarzt nach dem Import. Muss ich something umstellen?

  ICH habe nach dem last Update von Lightroom 6 nach dem import RAW-Dateien der schwierigkeiten. Die Bildansichten werden alle ausgeschwarzt nach dem Import. Muss ich something umstellen?

  Hi torstenh,

  Please follow the steps below:

  1. Turn off apply tone auto under Lightroom preferences settings
  2. Restart Lightroom and then import images again.

  Kind regards

  Claes

• Source Import Lightroom devices shows not all images on the card

  After importing images via the Lightroom Import Panel, I found that not all images on a card camera appear if "Source: devices" is selected.

  My camera creates a new image file (located in the DCIM folder) after 999 images taken by the camera. In this particular case, the images numbered _DSF0999. RAF and this is in the folder 110_Fuji and all that (for example, _DSF1000. RAF and above) is located in the 111_Fuji folder. However, Lightroom "Sources: Devices" (in this case, "Untitled") shows all the images in the second image file, 111 - Fuji. Only images in 110_Fuji are visible.

  
  

  "Copy all" is selected in the central part of the import Panel.

  The images are displayed if you select the card (in this case called "Untitled") in section "Files" from the dialog box import on the left side of the import Panel and check the box "include subfolders." It is not subfolders box or selection in the devices section of the import Panel, but rather a "eject after the entry" checkbox if the device is selected.

  Is this normal, or is there a way for all images on the card to be seen (and imported) through Sources: devices? Yet once, there is nothing like 'include subfolders' through Sources: devices, since it is in the section "Files" from the import Panel. Is there something that I am missing, or is this a bug? I looked through many books, google this deliverance, etc and I've not seen anything that addresses this issue. I usually just insert an SD card into a card reader and click on "import". The Lightroom import default settings of the control panel to the Sources: devices.

  Wadiest wrote:

  So, he was at least six months as this was reported and it has not been fixed or even recognized by Adobe? Awesome.

  This is the wrong forum. You can not "report" a bug to Adobe in this forum, and they don't recognize it in this forum.

  If you want to report a bug to Adobe and get a response, try here: http://feedback.photoshop.com/photoshop_family

• The first graphing calculator HP will not update. Stuck at x 2 + y2 = 1

  I tried to update my brand-new first HP Calculator graphic using a version update of the HP connectivity Kit.  The update failed and the calculator will reset but not exceed x 2 + y2 = 1.  I tried to use the following manual method of a post on Educalc and the usbtool will not load the update.  ANY HELP, PLEASE!

  Of HP first Firmware update manual

  1 download the firmware files and unzip into a folder

  2 wipe Calculator (optional)
  a grip on the keys of F, C and O while resetting calculator
  b to the menu, press 4.3, then enter
  c when the format is complete, go to step 3

  3 given to zero Calculator (back button) while holding the button "Symb".
  (poster or screen update tool ARM or recovery mode)

  4. connect the computer using the USB cable
  (wait of recognize the device USB)

  5 run usbtool.exe

  6 select the check box 'Auto update '.

  7. click on the button "Update".
  (blue bars will show that the unit is updated)

  8 calculator reset

  Note: If a step fails, please proceed to step 3

  Please, do not update your HP Premium using Parallels on a Mac Desktom.  I tried and the drivers of USB Port would not allow the update completed successfully using HP Connect, the Update.exe program or the application of usbtool.exe.  I managed with the help of an old laptop on XP using the USBTool.exe application using a native PC environment.

  I will say that I am running OS X 10.10 Mavricks Beta 2 on my MAC, but I don't think it's a problem, although I will know Parallels.

  If you use a MAC, borrow a PC (ugggh) to update your first HP.

  NOTE: the usb tool is displayed as part of the ROM for HP Premium updates on educalc.com at: http://www.educalc.net/2336439.page

  David

• Windows 7 Pro 64-bit not start after the first update.

  Integrated system:

  Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

  CPU: Intel Core i7-930

  Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

  HD: Western Digital Black 500 GB SATA 3 Gb/s

  Water cooler: Corsair H50

  The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

  First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

  The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

  Can someone help me with this problem?

  Thank you

  M. Vilela

  Hi Danielle,

  In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

  Step 1

  You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

  To view the update history, follow the steps below:

  A. open the control panel (all items view) and click the Windows Update icon.

  B. click on the link to view update history.

  To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 3

  I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have CC lightroom and Photoshop subscription but after the expiry of the insralling on my laptop the app States of trial CC - there was a previous trial on this pc

  have CC lightroom and Photoshop subscription but after the expiration of the insralling on my laptop the app States of trial CC - there was a previous trial on this pc

  Hello

  Please refer stop creative Cloud 2015 to return to the mode of trial

  See also problem with CC Photoshop licenses to rename the hosts file if necessary

  It could be useful!

  Kind regards

  Shelly

• My OS has been updated from Windows 7 to Windows 10 without disabling the Adobe Acrobat 9 installed on the machine. Now I'm not able to activate the reinstalled Adobe Acrobat. When I try to record the serial number, it is not accepted and that she is trea

  My OS has been updated from Windows 7 to Windows 10 without disabling the Adobe Acrobat 9 installed on the machine. Now I'm not able to activate the reinstalled Adobe Acrobat. When I try to record the serial number, it is not accepted and is considered as invalid. Is it others to activate the serial No. ?

  Hello

  Please see error: "serial number is not valid for this product". Adobe Creative Suite and serial number incorrect error

  Alternatively, you can contact customer service

  Hope that helps!

  Kind regards

  Sheena

• black screen in the window of the program after the first pro cs6 update.

  I worked several months without any problems before this update... Now I can not find which version I had before...

  I have a black screen when playing and the screen of the program after the first pro 6.0.3, 6.0.4 cs6 and 6.0.5 update.

  Reading appears when I turn renderer for CPU, but I have tons of projects already rendered GPU and it slowes my work down.

  I can't use 6.0.0 and 6.0.1 because there is no support CUDA for my GT650M and there is no 6.0.2 for Windows

  What am I supposed to do?

  I followed on my Dell 7720 material:

  Windows 7 sp1 64-bit

  CPU i7-3630QM

  16 GB of ram

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M

  FINALLY I FOUND THE SOLUTION!

  This problem appeared after Premiere Pro cs6 update 6.0.5. and Nvidia graphic drivers at 320... then 331,65. Reading CUDA started working correctly when I reinstalled the graphics drivers Nvidia 307.07 old. It was very unsupposed problem. NEVER DAY drivers and the system until that your projects are completed!

  Thank you very much for the help!

• No video playback after the first update of Pro CC 2015

  Updated for Premiere Pro CC 2015 on a MacPro OS x 10.9.5 and now I don't get any video playback either in the top left or top right.  I get audio fine, but no video.  Just grey.

  Other threads here related choppy playback and some said that they uninstalled 2015 and returned to 2014, but I can't find a way to do it.  In the CC application all I can do is install the 2015 version.

  Someone has suggestions for each fixing whatever the problem is I cannot see the video in my video editing software or go back to the previous version which worked great until they decided to update?

  Hi Thomas,

  Try this first:

  Click file > Project Settings > General and change the video converter to the to the software only Mercury playback engine. Click OK, and then select Remove previews. Then check if you have a normal reading.

  Dating back to the CC 2014: How to find and install the previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  Thank you

  Regalo

• After the upgrade to CS5 Audio is not import / load with video in avi format

  1. I've updated since Ppro CS3 to CS5 purchased in the Adobe store.
  2. I opened a project created in CS3 to CS5 and followed by the prompt to save it in a new project.
  3. All securities, modifications, etc. were intact and a given sequence played re-rendering etc as expected.
  4. I created a new project, any one of the same avi files used in step 2. Yet once again, everything worked properly
  5. I ran the Update menu in Agency assistance to 5.0.3. I ran this process two different times.  The first time, I selected all the updates.  The second time, I only updated itself.  I did a system restore in the meantime, the following results were identical in the two situations.
  6. Now when I open convert it or proposed new file, agency reports the media as 'offline'... is not. If I "Link Media" the file, I get this message: the selected file does not recording media used by clip contain references in one or more sequences. These references audio clip will be deleted and cannot Ωtre annulΘe. Want you? »
  
  
• Gspot.exe reports as MJPG video codec and audio codec MPEG - 1 Layer 2
8. Avi files have been made on a MAC from. MOV to AVI. Here are the properties of the file that the agency reports:

Path of the file: E:\CONVERTED\3-1

Type: QuickTime Movie

File size: 21.9 GB

Image size: 1440 x 1080

Sampling: 24

Frame rate: 29.97

Total time: 00:23:47:20

Average: 15.7 MB/second

Format of the pixels: 1.3333

9. Something in the 5.0 to 5.0.3 update is the problem.

Running on Windows 7, x 64, latest updates

Possibilities of technology is a much larger proposal because I'm not cool enough to have a friend of mac with the right camera and cpu...

It's funny...

I think my last question is what is the preset edition cs5 optimal for MOV files that I have?

If this is the film that will change you, the simple solution is just one of the clips slide the button new item at the bottom of the Panel project; It's one that looks like a chipped sheet. This will create create a new sequence corresponding to your images settings as closely as possible.

In General, however, is not really an "optimal" preset for any data type of sequences. Premiere Pro is quite flexible, you can use images of any kind in any kind of sequence you want or need. Certainly, in most applications, you want things like the size of the image, pixel format and cadence to match your images, but it not always necessary or even desired. I often work in sequences that are almost completely different from my source footage - it really depends on your personal preferences to work and your desired output. For example, I often work with assets of 1080i/p, but need to output to SD output. in this case, I don't even bother with an HD sequence preset.

How's this for the decarceration

Anyway, I'm glad you're on the way to resolution. Here he didn't cost a C-note, more!

• Can't see the video after the first/Adobe CC update?

  Hi all-

  I know it might sound like a repetitive question, however I am confused through the forums and found no resolution to my current problem.

  I have used as my software video editing Adobe Premiere Pro CC for a year and have enjoyed the experience until a problem happened, I think after the recent updates to my first installation.

  I can't see one of the video for the projects that I work on, past and present - only audio.

  The original files play without problem in any available media player (windows, VLC, etc.). the projects I created in first time before you no longer see any video in the source monitor or project...

  I converted the. I am currently trying to work with MOV files. AVI through a .bat file through VLC, but I'm still without success.

  everyone knows about this problem?

  PC running windows 10 and exceeds the specification of min for Adobe premiere. This particular video file was captured with a contour HD POV camera (as much of the video I captured and published first in the past.)

  the. MOV codec is H264 - MPEG - 4 AVC (part 10) (avc1)

  Resolution 1280 x 738

  Screen resolution: 1280 x 720

  Frame rate: 59.940059

  Decoded format: Planar 4: 2:0 YUV

  I've deleted and reinstalled first pro CC and assured me that all CC content that may apply is up to date.

  Can someone point me in the direction of a patch? or more information I can include that could help me understand my problem? your help is greatly appreciated.

  Thank you very much.

  Justin D

  It seems that your computer has NVIDIA GeForce GTX 950 M + Intel HD 4600 Graphics embedded.

  Try this:

  Go to Device Manager > graphics and disable Intel HD graphics cards. That could solve the problem!

  Thank you

  Regalo

• Not all cells in the table is formatted but just the first.

  var doc = app.activeDocument,

  _pages = doc.pages, i, j, k, l.

  _textframes, _tables _row, _cell, rownum;

  for (i = 0; i < _pages.length; i ++) {}

  _tables = _pages.item (i). Tables;

  for (j = 0; j < _tables.length; j ++) {}

  _Row = _tables.item (i) Rows;

  rowlen = _row.length;

  for (k = 0; k < _row.length; k ++) {}

  _cell = _row.item (i) .cells.

  for (l = 0; l < _cell.length; l ++) {}

  _cell. Item (i) .appliedCellStyle = "CellA ';

  _cell. Item (i).paragraphs.everyItem () .appliedParagraphStyle = 'ParA ';

  }

  }

  }

  }

  Hi, I'm stuck in this code. I want to format all the cells of the table, but using the code above only the first cell of the first row is updated with the format. The other problem is that, in all the lines, it is a cell unique couting. "CellA" and 'ParA' is the cell styles and paragraph styles I made in my pc. I'm relatively new to indesign scripting and try to learn something new.

  Hello

  1. There is no property, '.table' for 'page' pages.item (i) .tables returns error;

  2 Javascript is case sensitive so watch start a property with a small letter names ("Tables" are false);

  3. There is no need to browse the pages, tables, lines and cells - just use . everyItem().

  so

  app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().appliedCellStyle = "CellA";
  app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().paragraphs.everyItem().appliedParagraphStyle = "ParA";
  

  should work.

  Jarek

• Camera with GPS and Photos shows not all contact information when importing photos in pictures

  I have a Nikon AW130 with active GPS. While previously using iPhotos he always imported the exact location when you import photos. I'm using pictures and nothing appears under location. We are on a cruise on our sailboat and spend 10 months foreign traveling or diving in remote locations, geotagging is important. And I'm not geotag pictures of thousands that we take in a season of navigation manually. The Internet is also either not always available or slow and costly iCloud is not always possible. So what is the solution? Thank you.

  Photos will show the locations only, if the computer is connected to the internet after importing the photos. He needs a database of Apple connection to retrieve the names of places.  Pictures don't show latitude and longitude but a place name. If you have an internet connection, you should see a name of places and a small map in the Info Panel for photos.

  

  We are on a cruise on our sailboat and spend 10 months foreign traveling or diving in remote locations, geotagging is important

  Names of places in photos are not a great help in navigation.  Most of my photos of sailing is simply display "North Atlantic" or "Sea of Caribbean", such as the location, but the locations of the pins on the map are correct.  And if you export photos Tags the GPS will be integrated. Just, make sure that you enable empbed location information in the Photos of preferences > General.

  You can check if the GPS has been applied by the camera, if you export Photos photos, open in preview. The Info Panel in preview (Tools > Inspector) will tell you the GPS coordinates.

  

• Because I downloaded the update of firefox I have more the firefox screen and will work not all of my favorites. Why?

  After I downloaded the latest update firefox I knew he disappeared. The opening of the screen is no longer the fox logo. The area of search in the toolbar indicates that leads research. And I find that not all my favorites still work. Example-I have to go to att to access my e-mail. That's fine if that's the way it is supposed to work, but if so I would like to know how to change my home screen - or at least the first thing I see when firefox opens on the site of att that I usually use my computer for e-mail. I'm also used to use google search and I'm an old lady of cat crazy I'm not really ready to change the way that I am familiar with my computer.
  Ideally, I get photo fox with the google search screen and click on the marked bookmark mail back on my computer?
  I'm not computer unless it is as it always has. Thank you, dawn

  Hello dawn, please be aware that there are malicious sites that will trigger the update of fake reviews/popups that try to get you wrong download software bundled with adware. never click on such websites or run these files offer - updates are managed automatically by firefox and do not download any file to it (always manually, you can check if you're up-to-date by going to firefox > help > about firefox).

  Please try these steps to find your firefox:

  1. Reset firefox (this will keep your bookmarks and passwords)
  2. then go to firefox > addons > extensions and where there are still extensions listed there, disable them.
  3. go to the windows control panel and remove all installed software recently where you don't know what he has or other suspicious looks.
  4. Finally, run a full scan of your system with security tools like the free version of malwarebytes and adwcleaner to ensure that adware is not present in other parts of your system as well.

  Fix Firefox problems caused by malicious software