update of the router cisco 2600 to ios 15
Cisco Hello,
I want to update my router series 2600 xm from 12 to 15 version
What should I do to get the new version
and where the img source file, please? :)
Get rid of the 2600 as fast as you him can. The hardware components on this router is not the design of this last long. Let others cling to a match on fire.
Regarding simulators, such as GNS, I'm not familiar with them, or I'm a fan of them. There are several people who messages questions in this forum about trouble with GNS as it does not behave as well as a real router.
If you need to buy something for studies, get a G1 RSR (1800 or 2800 router but DO NOT get a 800 series router). For switch, get a catalyst 3K with basic IP image.
These facilities are an investment. When you get your certification, you can put it back in the market and recoup your investment.
Tags: Cisco Support
Similar Questions
-
Router Cisco ASA or IOS may be a SSL VPN clinet?
I would like to know if the router Cisco ASA or IOS may be a customer of SSL VPN? Thank you.
I'm glad to hear that.
Indeed the ASA5505 and Cisco routers can be EzVPN customers.
Please mark this question as answered if you have any other questions.
Let me know.
The rate of any position that you be useful.
-
Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.
Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work. I spoke with Cisco and they said that my Atheros AR5007 adapter does not work with Cisco E2000 and contact my computer vendor
Hello
HM... I guess that the Cisco people know what they're taking everything. The AR5005 is a b/g card and there should be a good reason to not work with a router that is able (the E2000 is able g) g.
This is HP drivers for the card, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-55737-1
If you can't make it work, you must decide between a new card or another router.
Personally, if it's new and I could return it, I'd get a different router model. But YMMV
------------
My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
IP SLA WORKS IS NOT ON THE ROUTER CISCO 1905
Hello
I use a 1905 series cisco router in my office, I have two links in this router.
The problem is that I am not able to configure IP SLAs at this router.
Here's the model and this router IOS image.
Model - CISCO1905/K9
IOS: c1900-universalk9-mz. Spa. 151 - 4.M4.bin
its display under option only.
srbi_shillong (config) #ip als?
authentication MD5 use Keychain for IP SLA control Messages
answering machine activate IP SLAS respondercan someone tell me what IOS will support IP sla in this router?
Thanks in advance...
Good evening
You need the DATA license installed on the router. Basic IP license only provides IP SLAS responder feature that you see.
-
HP Photosmart D110a does not connect after the software update of the router
I'll try a restatement of my first message:
Two days ago I had problems with my Internet service provider modem. This problem has been solved, but leads to a second problem still does not connect to the internet. Then with the help of technical support D-Link, an update of the software has been downloaded to my wireless router and installed and now I can connect to the internet.
But today, I had to use my printer/scanner for 2 1/2 year, HP Photosmart D110a, it is not connected through the above wireless router. (The blue light on the printer blinks just). Tech support says I'm out of warranty, so I hope someone can help me here on this forum.
Thank you!
Glad you got it to work, please mark it as Solution accepted so that others can search and find the answer too.
-
How to reset the password of the router cisco 1841
Hello
HAVA router cisco 1841 forgotten username and password and it had to rely on its setting default help pls
I tried boot while now ctrl and break enter rommon1 >
rommon1 > confreg 0 * 2142
rommon1 > reset
still shows rommon 3 >
pls help, he asks user name and password and don't remember them both
THX
J
You must start the router after that.
Type the rommon starting if you have set the boot variable correctly
-
Help to configure the router Cisco 1941
Help!
I just bought a router cisco 1941, I understand, it came with the Cisco CP, but I don't know how get you to the part where I can use it.
Also, how can I connect to the router directly without using the HyperTerminal console, all I want to be able to do is configure the address IP of the ISP and my IP address so I can use it for surfing the internet.
Help, please.
Hello
Thanks for the screenshots and show the output! You will need a few lines of command for CCP to work:
Configure the terminal
username username privilege 15 secret PASSWORD
IP http server
local IP authentication
Sent by Cisco Support technique iPad App
-
client ipSec VPN and NAT on the router Cisco = FAIL
I have a Cisco 3825 router that I have set up for a Cisco VPN ipSec client. The same router is NAT.
ipSec logs, but can not reach the internal network unless NAT is disabled on the inside interface. But I need both at the same time.
Suggestions?
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group myclient
key password!
DNS 1.1.1.1
Domain name
pool myVPN
ACL 111
!
!
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
market arriere-route
!
!
list of card crypto clientmap client VPN - AAA authentication
card crypto clientmap AAA - VPN isakmp authorization list
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!interface Loopback0
IP 10.88.0.1 255.255.255.0
!
interface GigabitEthernet0/0
/ / DESC it's external interfaceIP 192.168.168.5 255.255.255.0
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
media type rj45
clientmap card crypto
!
interface GigabitEthernet0/1/ / DESC it comes from inside interface
10.0.1.10 IP address 255.255.255.0
IP nat inside<=================ipSec client="" connects,="" but="" cannot="" reach="" interior="" network="" unless="" this="" is="">=================ipSec>
IP virtual-reassembly
the route cache same-interface IP
automatic duplex
automatic speed
media type rj45!
IP local pool myVPN 10.88.0.2 10.88.0.10
p route 0.0.0.0 0.0.0.0 192.168.168.1
IP route 10.0.0.0 255.255.0.0 10.0.1.4
!IP nat inside source list 1 interface GigabitEthernet0/0 overload
!
access-list 1 permit 10.0.0.0 0.0.255.255
access-list 111 allow ip 10.0.0.0 0.0.255.255 10.88.0.0 0.0.0.255
access-list 111 allow ip 10.88.0.0 0.0.0.255 10.0.0.0 0.0.255.255Hello
I think that you need to configure the ACL default PAT so there first statemts 'decline' for traffic that is NOT supposed to be coordinated between the local network and VPN pool
For example, to do this kind of configuration, ACL and NAT
Note access-list 100 NAT0 customer VPN
access-list 100 deny ip 10.0.1.0 0.0.0.255 10.88.0.0 0.0.0.255
Note access-list 100 default PAT for Internet traffic
access-list 100 permit ip 10.0.1.0 0.0.0.255 ay
overload of IP nat inside source list 100 interface GigabitEthernet0/0
EDIT: seem to actually you could have more than 10 networks behind the routerThen you could modify the ACL on this
Note access-list 100 NAT0 customer VPN
access-list 100 deny ip 10.0.1.0 0.0.255.255 10.88.0.0 0.0.0.255
Note access-list 100 default PAT for Internet traffic
access-list 100 permit ip 10.0.1.0 0.0.255.255 ay
Don't forget to mark the answers correct/replys and/or useful answers to rate
-Jouni
-
Tunnel GRE / IP Sec VPN firewall between the router Cisco and Fortigate
Hello
Can I do GRE Tunnel / VPN IP Sec between Cisco router and Fortigate Firewall?
Thank you
Hi zine,.
As long as the Fortigate device support GRE over IPSEC, you will be able to create the tunnel between these 2 devices.
Here is the config for the Cisco Site:
https://supportforums.Cisco.com/document/16066/how-configure-GRE-over-IPSec-tunnel-routers
Happy holidays!
-Randy-
-
Question of the router Cisco RV series
Hello
I have a question. We sell a lot of cisco 800 routers. Now for some clients, we have that they are expensive.
Then we thought about the RV series, but I can't find any good routing performance for these routers specifications.
If I go to:
http://www.Cisco.com/Web/partners/downloads/765/tools/quickreference/routerperformance.PDF
I see a lot of details of the cisco product, but the RV series isn't here.
Can someone tell me what are the specifications of performance of these routers? (packets per second, Mbit/s data rate)
Thanks in advance,
Tom
You can also access the data at smallnetbuilder. There are many different performance tests
-
Redirect port on the router Cisco 881 can following the active WAN Interface
Hello
Is there a way to make the port Fowarding after the Active Wan Interface?
In this case the port Fowarding only works when the interface is active is GigabitEthernet0/0
Bureau3616 (config) # ip nat inside source tcp static 192.168.2.xxx 3389 interface GigabitEthernet0/0 3387
If our ISP-1 failure on WAN-1 Interface GigabitEthernet0/0 switch to internet access automatically to ISP - 2 WAN-2 on GigabitEthernet0/1 but the port forwarding does not work because it is fixed to the other interface only and I is not the way to port forwarding follow the WAN an actress.
Let me know please if anyone has an idea.
It is a part of my config
! NAT configuration
Bureau3616 (config) # ip nat inside source map route NAT-WAN1 interface GigabitEthernet0/0 overload
Bureau3616 (config) # ip nat inside source map route NAT-WAN2 interface GigabitEthernet0/1 overload
Bureau3616 (config) # NAT-WAN1 allowed 10 route map
Ip address of Bureau3616 (config-route-map) # match 100
Bureau3616 (config-route-map) # match interface GigabitEthernet0/0
Bureau3616 (config-route-map) #exit
Bureau3616 (config) # NAT-WAN2 allowed 10 route map
Ip address of Bureau3616 (config-route-map) # match 100
Bureau3616 (config-route-map) # match interface GigabitEthernet0/1
Bureau3616 (config-route-map) #exit
! Port Fowarding configuration
Bureau3616 (config) #ip avant-protocole nd
Bureau3616 (config) # ip nat inside source tcp static 192.168.2.xxx 3389 interface GigabitEthernet0/1 3387
Thank you!
You can, but you can't use transfer based on the interface of the to do. It should be based on the address itself. It's fine if you have static addresses or reserved on your WAN interfaces, but pose a problem if the addresses are dynamic:
ip nat inside source static tcp 192.168.2.x 3389 1.1.1.1 3389 route-map NAT-WAN1ip nat inside source static tcp 192.168.2.x 3389 2.2.2.2 3389 route-map NAT-WAN2
Replace the address of your interface WAN1 and 2.2.2.2 with the address of your 1.1.1.1 WAN2 interface. Applying the road maps will work pretty much the same way as it does with your statements of overload. Each transmission NAT rule applies only to the traffic corresponding to rules of the road map. -
Allowing IP addresses on the router
I have a router Cisco 1841 running IOS ENTSERVICESK9 - m Version 15.1 (2) T1. This router supports the IPS? How to activate it?
Hello
I don't think so.
Table 2
only this IOS feature set supports it:
Advanced, business security advanced and advanced IP Services
Gabor
/ pls rate.
-
How is the ACL name of the router for fleeing?
I want to test running and have a question, the name of the ACL.
I configured the device blocking on the IDM,
-blocking interface Fastethernet0/0 =
-direction = in
-Pre IDS_PRE = ACL name
-Ask the IDS_POST = ACL name
Change a signature "ICMP-echo" to shunhost and update on the router but added new ACL under Fastethernet0/0 as the name IDS_Fastethernet0/0_in_0 and rocking it with IDS_Fastethernet0/0_in_1.
Q. why the ACL name not follow my name on the IDM?
Thanks in advance.
I think that there is some confusion about what are PreACl and PostACL.
The PreACL and PostACl entries in IDM do not affect what's name created sensor ACL on the router.
The sensor will always create an ACL that is named with the following format:
IDS___<0or1>
So for you the configuration it would create the following names of ACL:
IDS_Fastethernet0/0_in_0 and IDS_Fastethernet0/0_in_1
E he uses 2 ACL because it cannot modify an ACL that is currently applied on the interface. So if ACL 0 is currently applied then it will create 1 ACL and then apply ACLs one (which Désimpute ACL 0).
The sensor can then remove 0 and create a new ACL 0 when a change has to happen.
So, what are the pre and Post ACL names used for?
One of the biggest complaints we had with older versions of the probe was that the user could add no lines to the ACL that created the sensor.
So we came to the top with the pre and Post ACL so that users can add entries to the ACL that creates the sensor.
The user must connect on the router itself and create an ACL with little matter the name they want. Inside of the ACL, they put the entries they finally want to see at the top of the ACL that will create the sensor.
When they set up the sensor, they take the name of the ACL, they created and enter it in the field for the name of PreACL.
The user can do the same for the entries they want at the bottom of the ACL generated by the sensor by creating another ACL on the router. Put it in the Scriptures they want to see at the bottom of the created sensor ACL and then type the name in the name of PostACL field.
If the names of pre and Post ACL aren't going to use to name the ACL created sensor.
But on the contrary these ACL is read out of the router by the sensor, and these ACL entries will be placed inside the ACL, created by the sensor.
0or1> -
Want to update IOS through the Rommon mode in router Cisco 881
Hi all
I'm not able to upgrade IOS via mode Rommon in Cisco 881 router as FE 4 port is in router only L3 and rommon mode it supports of 0 - 3-way only.
So please confirm for me that is there any other way or Cisco 881 router will not support IOS via Rommon upgradation.
Kindly help.
Hi charrier you do not give the ip address of the router interface he gets in rommon so it should not matter what interface, as long as your pc and peripherals, same subnet to push the tftpdnld - see doc
http://www.Cisco.com/c/en/us/TD/docs/routers/access/800/software/CONFIGU...
EDIT: See this too good examples even syntax for 800
https://supportforums.Cisco.com/document/12441/tftpdnld-ROMMON-command-r...
-
Router Cisco has tried to take a firmware update and no longer works
OK, so internet worked very well until Cisco Connect told me to take an update. My connection is connected and there is no disruption during the download. Yet the download failed again and now my power light flashes constantly and there is no internet access. I tried to find out "How to unbrick your Cisco router", even pushed them to work, it took the update of the firmware of the cmd line. Still does not work. What is the problem with this thing and how to fix it?
I finished downloading a firmware utility program and managed to get to recharge. The power led has become solid somewhere between 2-5 minutes, is however not yet connect to internet. Found that all this factory reset will change your Internet username & password, with no way to find a new one. You must remove the program Cisco connect from your computer and reload from the original disc. Only then you will be in service yet. While I appreciate the answer Helm, I was well beyond a second solution 30 reset button when I posted this lol.
Maybe you are looking for
-
Portege Z930 - BIOS downgrade v2.30 to v2.20
I bought the Z930. Two days ago, I received an alert TEMPRO on an update of the BIOS.I downloaded the new BIOS zip file and installation. Then I got a message like this: BIOS version: Ver.2.30 current-> update Ver.2.20THIS Version: Current Ver.1.20->
-
How to increase ram on my toshiba c660 - 18 c
the ram on my toshiba C660 - 18 c is (1 GB) Iam said that ram should be at least (2 GB) can you please tell me how I do this increase in ram please concerning Ron Flynn
-
Original title: cannot open my explores Try to connect to the Solution Explorer, I get a message: "C:\Windows\system32\DWrite.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation
-
Retrieve or change password for wireless network.
Can't conect to my wireless network.
-
How can I get my recovery disk to work if I had to change the material
Please help if someone has an answer