Update of Windows 8 caused computer lose Viewer Windows Photo and others.

Similar Questions

• My computer turns off during an update to windows xp and now windows xp will not load.

  My computer turns off during an update to windows xp and now windows xp will not load.  It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options.  I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive.  I have the product key, but I don't know where or how repair the operating system.

  Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.

• I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates.

  Thank you for taking the time to read this. I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates. I thought I would do a clean install of Windows XP, install my Microsoft Works again and nothing else. I would like to effectively transforming my computer into a word processor. He continues more and more slow. I get blue screen errors, once again. I received excellent Microsoft Support when it happened before, but since my computer is around 13 years, I think it is not worth the headache to try to remedy. I ran the Windows 7 Upgrade Advisor, and my computer would not be able to upgrade. Please, can someone tell me how to make it only a word processor without updates or internet connection? (I already have a new computer with Microsoft Windows 7 Home Premium, it's the computer that I use. The old computer is just sitting there and once a week or so I updates.) I appreciate your time, thank you!

  original title: old computer unstable

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites
  You can choose which site to reinstall XP.

  Once it is installed, then you do not have to connect what anyone, however, some updates may be required to perform the work, test this by installing work and see if you get an error msg. Except that you should be fine.

• I have just updated to windows 8 and I hate it. How to return windows 7?

  I have just updated to windows 8 and I hate it.  How to return windows 7?

  Hello

  Clean, install your Windows 7 Media 7 or restore the Windows 7 System Image that you did before upgrading Windows 8.

  If you don't have that:

  The only legal Windows 7 download available is now Microsoft, as Microsoft has stopped DigitalRiver Windows 7 ISO downloads.

  http://www.Microsoft.com/en-us/software-recovery

  But Microsoft only provides these downloads for Windows 7 keys to selling product at retail, not preinstalled OEM product keys (Dell, HP, etc.).

  If you have a Windows 7 license detail and are having trouble at the above Web site, contact Microsoft using the Support option.

  If you have a preinstalled OEM license (Dell, HP, etc.), contact the manufacturer of your computer to order recovery media that they need to provide for a fee.

  Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.

  See you soon.

• Windows security - they have my computer was attacked by viruses and other malware, has offered assistance to the evaluation, indications of problems

  Received a phone call from an organization called Windows Security (or similar name). They advise that they have indications that my computer was attacked by viruses and other malware, has offered assistance to the assessment, problems, etc.  I went through a series of tasks that I believe that gave them access to my computer, but then got suspicious, and said I would call back. Given telephone number was (520) 720-0786.  Given names were Sean Wilson and Bryan Hussey.  Please indicate if they are legit, and if not, what can I do to protect myself?  Appreciate your help... Brian

  Received a phone call from an organization called Windows Security (or similar name). They advise that they have indications that my computer was attacked by viruses and other malware, has offered assistance to the assessment, problems, etc.  I went through a series of tasks that I believe that gave them access to my computer, but then got suspicious, and said I would call back. Given telephone number was (520) 720-0786.  Given names were Sean Wilson and Bryan Hussey.  Please indicate if they are legit, and if not, what can I do to protect myself?  Appreciate your help... Brian

  This is a complete scam.  You can report it to your local police.

  For your own protection, you should:
  • Change your passwords on email accounts, accounts financial and sensitive to which accounts you access online from this PC.  RIGHT NOW!
  • Run a full scan of your PC using your antivirus application...    Also download and run a full scan with Malwarebytes Anti-malware (free edition).  MBAM is a very good solution in addition to your primary backup antivirus/antimalware application.
  • I would also go here: https://www.microsoft.com/security/portal/Shared/Help.aspx and follow the advice of "I think that my PC is infected", including potentially calls MS help.
  • Above all, do not delay!  If you have any concerns about the handling of it, then disconnect your computer from the internet and call MS before anything else.

• What should I do to update the Windows Photo Gallery?

  I try to send pictures of the Windows Photo Gallery, but he said: I'm not supported or I need to update the Windows Photo Gallery. How do I do that? I don't know where to go.

  RE: How to upgrade Windows Photo Gallery

  Open Windows Photo Gallery > file > Options > under automatic updates, run a make check "tell me when". "> click on" Check for updates "> click OK > OK again. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

  Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

  80070490 = permission denied / [a problem initializing or using session variables] or item not found

  80070643 = ERROR_INSTALL_FAILURE

  http://support.Microsoft.com/kb/958044

• Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.

  Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)

  Now just got a new error code: 6 to 8.

  The updates, I can't update (!) are:

  1. SQL Server 2005 Express Edition Service Pack 4
  2. Update of security for MSOffice 2007 System
  3. Update for MS 2007 Office system
  4. Update for MSOffice Outlook 2007 Junk email filter

  Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse!  ;-)

  Thanks in advance

  Sharon

  original title: error codes: 6-8 and 80070641

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• important updates for Windows 7 and windows 10

  In the optional updates, I've disabled windows 10. For important updates, I checked several updates security for windows 7 (updates are October; there are updates 42 total now). I click ok and then download. The next screen that appears includes "Download windows 10 get installation files."  I canceled the update. The message on the screen that results is "some updates were not installed cancelled 2 updates. He has also "two important updates selected."  When I click on "Try again", windows download 10 configuration files will reappear. I chose a small update to see if the file would actually download and the next screen is the screen with the message Windows 10.

  What is happening with the update windows 7 security and other files?

  How can I get downloads important and not on the Windows 10?

  Why they made system keeping trying to download windows 10 although I unchecked the box for it in the optional updates?

  Searching for updates is also a question as the guard just wheel spinning. Is something to do with updates for windows 7 and 8?

  You are replying to a thread that is almost a year.  Many things has changed.

  I recommend you just go about it:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

• I have just updated to Windows 7 and when I try to run a backup they fail.

  I have just updated to Windows 7 and when I try to run a backup they fail.  It seems that whenever a program tries to update the external HARD disk where backups reside it requires administrator permissions.

  Looking at the options Microsoft suggest that their user account control system is not supported by my version of SyncToy. What can I do? I'm looged administrator

  As you have installed SyncToy until you have created the required permissions, uninstall SyncToy, reboot, then reinstall SyncToy.

• I updated to Windows 10 and then back to Windows 7.  Now Adobe Reader does not work.  He said: I'm missing acroread.msi.  I tried to uninstall the program, so I could re - install, but it will not uninstall either lack of acroread.msi.  Pouvez anyo

  I updated to Windows 10 and then back to Windows 7.  Now Adobe Reader does not work.  He said: I'm missing acroread.msi.  I tried to uninstall the program, so I could re - install, but it will not uninstall either lack of acroread.msi.  Can anyone help?  I tried all the troubleshooting steps that I could find in the forums and online without success.

  

  I managed to fix it.  I found the Mr. Fix It tool on the Microsoft Web site and who was running, and it worked.  He fixed the corrupted registry file and allowed me to install the player.  I had tried it once before, but it has not been successful.  This time, it worked.

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• Windows Photo and slideshow - images show as icons instead of thumbnails

  original title: Windows Photo and slideshow

  Ahmed, I have a problem of the emergence of images as icons, not thumbnails in Windows 7

  Miniatures,

  Open your my pictures location,

  Click organize , on the upper left side,

  Click on folder and search options,

  Click the View tab and uncheck the top option,

  Always display icons and never thumbnails, select apply then search and click on the box.

  Show hidden files, folders, and drives to click on apply and then OK.
  If the photo thumbnails appear now but look washed out.

  Right click on them and select Properties, under the general tab section,

  Uncheck it hidden attribute box and save.

  Return to your my pictures location, change the display of the page on the top of the right side next to thequestion mark symbol, there is another symbol with a drop down arrow, click it and select the medium or large icons options specified

• Why EnableProxy Reg_DWORD is missing in windows xp, while windows vista and others, OS has the EnableProxy Reg_DWORD in the registry editor?

  Why EnableProxy Reg_DWORD is missing in windows xp, while windows vista and others, OS has the EnableProxy Reg_DWORD in the registry editor?

  Hi Stuckfree,

  Your question would be better suited for the TechNet forums.

  I suggest you to ask your question to the TechNet forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Problems with the launch and printing from Internet Explorer 10, with updates of Windows Installer and start-up and shutdown of the computer.

  Original title: IE 10 freezes work stoppages and turns off

  I use it is to say 10 since I have a new computer in 2012 have not had problems, but for the last week, if I try to print something from my mail I receive IE has encountered a problem and closes the page and restarts it so go to Mozilla to print, yesterday IE was out completely had to return to Mozilla to get on the web. I have also had problems with my computer do not completely stop or does not start, I get to the part type to password in the and he died, tried to install optional updates in windows and it has not does anyone know what I can do to solve the problem. would really appreciate it

  Hi Mark,

  Have you tried the steps I suggested in the previous posts? If this isn't the case, please try these steps and check if that helps.

  You can also try the steps outlined in the article and check if it helps.

  I can't print or preview before printing a Web page in Internet Explorer

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.