Update of Windows reoffers the same updates again and again

Similar Questions

• updated Windows SP1 downloaded fine, but I still get notified to install the same thing over and over again... What's new.

  updated Windows SP1 downloaded fine, but I still get notified to install the same thing over and over again... What's new.

  Hello

  I understand that you are warned to install the update even repeatedly. I'll be happy to help you with this problem.

  (1) did you do changes on the computer before this problem?

  (2) you have Service Pack 1 installed on your computer successfully?

  (3) are you advised to re - install the Service Pack 1 update again?

  (4) you receive an error message when you try to install Service Pack 1?

  Method 1: I suggest you run Microsoft FIXIT from the link and if the problem persists.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2: I also suggest you to follow the steps from the link and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  For reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• When I run Fix it is indicates a problem with Windows Update, says that it suits him but will show the same failure over and over

  Running Windows Vista SP2 and IE 9.  When I run Mr. Fix - It on Windows Update, is shows the components of Windows Update must be corrected.  I am hosting the program solve the problem.  If I re - run the same test again once, he does the same.  I have the other problem of breakdown on race fix it on any other criteria.  When I run the fix - it on Internet Performance and security, it shows my data execution Protection is disabled and my Smart Screen Filter is off.  Both are activated.  If I let the program Fix - It problems, even if they are correct, Fix - it continues to fail.  Any ideas?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.Microsoft.com/forums/en/fixitcenter/threads

  It will be useful.

• I follow from the same date over and over again. And it updates successfully whenever I sign in my computer.

  I follow from the same date over and over again.  And it updates successfully whenever I sign in my computer.   Or I can click on windows update and update the same thing again.  Some miuutes or a fews seconds it will say I need to update my computer again.  I updated the same 25 times.  How can I stop this.

  Hello

  I suggest you follow the steps in the link below and check if it helps:

  http://support.Microsoft.com/kb/910339

  It will be useful.

• After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  Yes, no extra accommodation payment is required. After editing your site and savings, click download file to the host of VTT... The info should auto fill with the same information that you used to download the site the first time. You can choose to download only files "changed" or "all files". Click OK and the old files will be overwritten.

• How do I keep my wifes calls appear on my phone and mine appear on hers, we share the same acct icloud and itunes? It just started this on one or two updates ago

  How do I keep my wifes calls appear on my phone and mine appear on hers, we share the same acct icloud and itunes? It just started this on one or two updates ago

  Welcome to the Apple community.

  I'm afraid that is what happens when you share an Apple ID.

  Ideally you should each have your own ID and use family share for share purchases, but at least you would be better to have your own ID's for everything except iTunes.

  I suspect that your problem is that you share an ID for FaceTime, you must either stop this or make sure that you have only and that your caller ID is only your phone number.

• Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.

  Help!  I have an apple mac with windows alongside mac system.  I the have not used for a while and when I logged in the windows system advised me to update to IE 9.  To do this, I had to install Service Pack 2 I did.  He then restarted but cannot install and came up with the following: Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.  I don't know what to do to reopen and to reinstall the Service Pack.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Shuffle all is no longer works, I have to manually advance to the next song or listen to the same song over and over again

  Since the update to iOS 9.3.1 my iphone is more my music mix.  I can type shuffle all, but he played just the same song over and over until I manually advance to the next song.  Any suggestions on how to fix it?

  It's strange because on my iPhone 6 if I hit Shuffle All (at the top - it doesn't matter if my view of my library is on songs, Albums, artists) it certainly mixes between songs and does not play the same song over and over again.

  Just to be sure that we are talking about the same thing-, you tap my music at the bottom of the screen and then click on library above, then press Shuffle All? Because that's what I did and had no problems. Maybe try forced him to leave the music application (double clicking the HOME button, and then drag upward on music app) or even try to do a hard reset of the iPhone (now the HOME and POWER buttons until the Apple logo appears).

• How to open a new window in double? Two windows with the same content.

  Hello, I am switch of IE8 to Firefox. We must be able to open a new window with the same page instead of going to my home page. In IE, it's called "Open A New duplicate Window. This feature is very important for us using two screens for web development. Thank you

  Other posters have a difficult time distinguishing tabs and Windows, it seems. With a lot of posters here the two terms are used incorrectly and indifferently, as is the desktop and the window of Firefox, but my understanding is that a lot of this "bad language" is taught in schools.

  This is the only thing that I could find quickly for you:

  • http://www.Pikey.me.UK/Mozilla/?addon=clone-window
  • Compatibility information Firefox 5/6: http://www.pikey.me.uk/mozilla/

  Comments on the first link (read carefully). May not work, unless this should be 'current tab's addressare'and it seems he can "take back" the new tabs in the window/new selections (i.e., no new windows/tab blank):

  • Clone the address of the active tab and the story in a new window when the new command window is used (and possibly in a new tab when ordering new tab is used). {It is emphasis added}

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing. How can I save this monster?

  computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing.  How can I save this monster?

  Hello

  First, disconnect all the external devices connected to the computer, and then try to start and check what is happening. If the same happens, then you can try to start in safe mode and check if you are able to boot to the desktop. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Re-install Windows in the same computer laptop but different mainboard

  Hello

  I have a laptop with Vista Home Premium 64-bit. There are several butterflies I changed it was a genuine Windows Vista Business 32-bit. Recently, I have a problem with my laptop and the manufacturer said that it needs a motherboard replacement, so now the laptop is still be fixed. My question is, can I re - install my laptop using the same Windows Vista Business 32 bit DVD I already had? If not, is there something I could do in order to install using the same DVD again?

  I asked about this on the Volume License Service Center (* address email is removed from the privacy *), but the representative (Jenny) told me to request technical assistance. The ticket/problem code isSRX1132703102ID.

  I hope I could get a response on this matter.

  Thank you

  Aswin

  Yes, you can use the same copy of the retail of the 32-bit Vista Setup disk you used - the only problem is that it can be installed on a single computer at a time.

  You can have trouble activating due to the new motherboard, so do it manually.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate Vista.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot open the illustration. There is not enough room for the window; increase the area of document and try again

  Hello

  I'm under Illustrator CS6 on a Mac version 10.10.3. I created an Illustration and I accidentally did very little to save and close the window. Now whenever I open the file I get the error "unable to open the illustration. There is not enough room for the window; increase the area of document and try again. "This problem is specific to this file only - I can open all other correct files, and anyone who tries to open that particular file on a completely separate machine receives the same error. I read all the posts of people having the same error message, but their problem is different from mine because my problem is specifically limited to this file. I've trashed preferences, hidden and shown the toolbar Application and an open framework of other files and makes them great as possible, has the file open on the file menu, instead of double clicking, and none of these methods work.

  Can anyone help?

  Thank you so much in advance!

  Well, problem solved. For future users with this problem:

  Open a new document in Illustrator

  Press "F" to enter full screen mode

  File > open to open the file problem

• How to play the next song with the repetition of the same song over and over again

  How to play the next song with the repetition of the same song over and over again.

  

  In this screenshot, shot an Apple article, you can see four icons at the bottom of the screen. Look at the third argument of the right, with the two arrows going in a circle. It's the repeat function. When turned on, you can tap the icon to turn it off.

• How to open a new window to the same URL?

  When I click CTRL + N to open a new WINDOW, is it possible to open the new window to the SAME URL than the one I was on (instead of opening my homepage)?

  You can tear off a tab in a new window by dragging the tab slightly down, but who will remove the tab of the active window.

  You can watch this extension:

  • Double window 2: https://addons.mozilla.org/firefox/addon/duplicate-2-window/
  • Clone: https://addons.mozilla.org/firefox/addon/clone-it/

• How to switch between multiple windows in the same application?

  Hello

  I use OS X Capitan version 10.11.13 and I'm trying to find an easy way to switch between multiple windows in the same application by using CTRL + alt or different keys.

  Here is what I feel...

  Let's say I have Outlook, Google Chrome, Safari, iTunes and apps 'about this Mac' open.

  I open the new message window in Outlook and another Chrome window. I have therefore 2 separate windows in Outlook and Chrome.

  With that, I'm unable to move the composition and the window main outlook which is so annoying. Let's say I want to read the emails by the prospect main window and transfer of the content of the compose window! The command + tab doesn't take me to the main window of Microsoft outlook! Even if there were the last visited / applications window. This constraint is not intuitive, unless it can be configured in the settings?

  Strangely, I can't switch to the "about this Mac" window.

  The work around is to use the function (F3) mission button and click on the window, that I want to use or click the "Outlook" application on the dock icon and choose the window in the list.

  Does anyone know how switch between different windows in the same application by using a key combination or one another method other than listed above?

  Thank you

  Avinash

  In general, an Application that can open multiple windows provides a "Windows menu" you can choose the window you want.