Update on failure and storage ready Nas

Similar Questions

• Don't restart Ready NAS Duo

  We walked into work this morning and our ready Nas Duo was not working and does not detect on RAIDar. We hit the Reset button and turned on, the blue light flashes, lights flashed on and outside and the fan makes a noise, but it doesn't do anything else. We tried unplug and wait a minute before you do it again, still nothing. It detects no more in RADARS, but it was working very well and detect radar last week. When we put our serial number in, it came with ReadyNA SRN2000 in the model, but it won't let me put that in the above model number section.

  Yes, you will need to disable the power is not blocked during the boot process.

• I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is on

  I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is only 5400 RPM. a 7200 RPM 7 / would accelerate the iMac?

  No, because the limiting factor is the computer is USB 2.0, which is how it connects any external drive apart the external drive. As USB 2.0 is much slower, there is no real advantage to a 7200 RPM drive. What you need is a Firewire enclosure that supports FW800 which is much faster than USB 2.0.

• Update 80070103 is a failure, and I get message that firefox is crashed!

  Update 80070103 is a failure, and I get message that firefox is crashed, how to install this update?

  Hello

  1 did you changes to the computer before the show?

  2. who is the antivirus installed on the computer program?

  3. the updates you are trying to install?

  4. that you get an error message when you work with Firefox?

  5. are you able to work with Internet Explorer?

  I suggest you to provide information about the update has failed.

  See the updates of Windows Installer
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  I suggest to refer to the article and complete the steps described in the article:

  Windows Update error 80070103
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

  See also:

  
  The problems with the installation of update
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  I suggest you to contact the support of Firefox about firefox:

  http://support.Mozilla.org/en-us/home

  I hope this helps.

• My computer says updated configuration failure, recovery changes, do not turn off your computer... I left on three days and he said that

  My computer says updated configuration failure, recovery changes, do not turn off your computer... I left over three days, and he said that. Does anyone know how to get that back in Windows so I can use my computer. It is a laptop Windows 8.

  Do a Startup Repair:

  Auto repair - run in Windows 8 - Windows 8 Forums

  Let us know if it is not resolved

• Failure to KB957247 updates of Windows and Office 2007 SP2

  Hello

  I tried several times to download both the 2007 Office Suite Service Pack 2 (SP2) and PowerPoint 2007 Help (KB957247) updates, but they do not continually. (Using Vista Home Premium and have downloaded for this SP1).
  I tried to use the two update Windows and also on the Microsoft site. I followed some of the instructions in the help section and checked the services and the office source engine etc engine, but it has no effect.

  All other updates have downloaded without any problem, could someone please give me some advice?
  Thanks in advance,
  Regs, Maria

  Hello community group;

  Thank you for your answers and post them on the community forum.

  Here's what I suggest:

  Step - 1

  ********

  Let's view the update history

  1. Click on start ORB / line type Windows Update search / click on Windows Update / Select View Update History

  Note all the updates it shows as failed and keep it for reference us might need you to be listed here.

  Step - 2

  ********

  Start the system in safe mode with network.

  Step - 3

  ********

  Action: Stop the updates Windows, encryption and the Bits Service.

  -To do this, click on start ORB / research line type Services - click Services - search for the above services and stop them.

  Step - 4

  ********

  Action: Rename the catroot2 and softwaredistrubution folder.

  Click on start ORB / online search, type C:\WINDOWS\SOFTWAREDISTRIBUTION.

  Should be C:\Windows\softwaredistribution - click with the right button on the folder and name it softwaredistributionold

  Click on start ORB / online search, type CATROOT2

  Should be C:\Windows\System32\Catroot2 - click with the right button on the file and rename it catroot2old

  Step - 5

  ********

  Action: Restart the system.

  Step - 6

  ********

  Action: Check the updates of Windows.

  ********

  Step - 8

  ********

  Action: Tried to install the update.

  Record everything: "error codes you receive - if none can continue with the updates in the affirmative.

  Those write down so that we can revisit it later.

  Go and perform a MODE MINIMAL start-up Perform first step.

  Step - 9

  ********

  Action: Start the Windows Installer service.

  Click on start ORB / line search type Services - click on Services, locate the Service Windows install and start it.

  Step - 10

  ********

  Action: Uninstall the existing version of msxml program and features.

  Click on start ORB / Control Panel / programs and features / uninstall programs - look for all instances of MSXML and uninstall.

  Step - 11

  ********

  Action: Start in safe mode with networking

  Step - 12

  Start the Windows Installer Service - click on start ORB / online search, type Services / find the Windows Installer service and start it.

  Step - 13

  ********

  Action: Check the updates of Windows.

  If updates do not install using this method start again under stage 1 boot, restart the Windows service install and check updates.

  After all troubleshooting is complete, install the updates or not to boot your system to the configuration found in step 7 of the procedure to clean boot, your system will be in normal condition.

  Please keep us informed for the purpose this.

  Thank you

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is the error code 0x8007042c MSE on Vista Home Premium update failure and how to fix... Please... SLÁINTE all... liam k

  I get this when I try to update in MSE and he said it signals a connection problem to I assume the server of Microsoft, but I'm online... I went to the control panel and got the update of security here no problem at all, I have MSE long ago... should I try & uninstall it & download a new or dose it really have future consequences and I need advice... All, you thank your sincerely liam k

  You upgrade your Windows XP computer to Vista by chance, or was it a brand new computer that came with Vista pre-installed?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Additional references may include:

  • Checklist for installation of Microsoft Security Essentials
    http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/Microsoft-Security-Essentials-installation/e6e18776-9571-42E9-8fc0-66717dde0e19
  • Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
    http://answers.Microsoft.com/thread/87058857-D181-4019-a723-efd9a49d9275

• Installed Vista Update 1 package and now windows will not start

  I have a laptop Acer Aspire 4520 with a 32-bit system 64 x 2 dual core processor with Windows Vista Home Premium and just installed explorer8 updates Vista I get the package. Installed successfully, took about 45 minutes. Tells me to restart my computer. Click on restart. It restarted with goin' through bunch of # s as the first part 24 390 / 74 280 in growing in order to achieve the final number that it stopped at about 34 761 or something like that for over an hour.  I assumed that it froze. I did a hard closed down and after reboot door top, unable to start Windows.  A recent hardware or software change might be the cause and options to start windows normally or start the reboot system (recommended).  I chose normally, microsoft corporation logo came on screen with progress/cargo in addition to this box, and then it turns off and rebooted itself.  This time I chose the launch startup repair and he went to remove some threads or something and add as 9 things that did not file names.  He said he was doing a CLNDSK?  It was the only time he's done this. Now, either you the hit button brings up a blue screen that says "a problem has been detected and windows has been shut down windows to avoid damaging your computer."  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again, follow these steps: ensure that new anuy hardware or software is properly installed.  If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.  If problems continue, disable or remove any newly installed hardware or software.  Disable the BIOS memory options such as implementing caching or shading.  If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.  Technical information: * STOP: 0x0000C1F5 (0x00000000, 0x00000000, 0 x 0000000 0x00000000) is once again this whole message on a blue screen in which you can proceed to any other, but to stop the machine.  I even tried the advanced, including Boot Options: repair your computer, safe mode, safe mode with networking, safe mode with command prompt Mode Mode Mode, boot logging, enable video low resolution (640 x 480), last good known Configuration (Advanced), Directory Services Restore Mode, Debug Mode and start Windows normally.  Disable the automatic restart on system failure works.  Another option is the F2 key on startup.  I CAN'T go near a window to start it's totally out!  And I do NOT have a disk of Vista, that it came with it.  Need solutions before I go out my hair.  (Good operating system until the download and I only downloaded this because I download Adobe Flash Player 11.2 problems and I thought about updating my Windows can help)  Ready to take this computer back unless it is quickly fixed.

  .. .just for a future heads up what should I update on a new system from Microsoft.

  All the day of security offered by Windows Update/Automatic Updates. See http://windows.microsoft.com/en-us/windows7/Updating-your-computer

• I'm now 95 updates cumulative failure (80070643). These failures always me directly to make sure that ose is running. OSE works very well. How to update?

  I'm now 95 updates cumulative failure (80070643).  These failures always me directly to make sure that ose is running.  OSE works very well.  How to update?

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
  http://support.Microsoft.com/kb/958052

  and/or

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  TaurArian [MVP] 2005-2010 - Update Services

• Windows Update repeatedly and prompt to install the same updates: KB 2686828 and KB 2656369.

  I have exactly the same problem as you cyclingchris.  I spent hours with no result.  Ready to throw this old laptop XP and upgrade, but it still works for what I need to.  Please report if find you a solution.  I tried pretty much everything recommended with no luck.

  Hello

  Hide updates and check:

  Note: You must be logged in as an administrator or have an administrator password to do so.

  (a) click the Start button, click all programs, and select Windows update.

  (b) select updates Important or optional and verification of the list of available updates: KB2604092, KB2656369 and KB 2656369

  (c) place your mouse on each update you want to hide, and then right-click on it and choose 'hide'. Follow the same to hide some other updates, providing several times after successful installation.

  It will be useful.

• KB3034344 Windows update fails to install, update is broken and cannot be fixed

  I am running Windows 8 on a machine that has been upgraded to Windows 7 (and initially Windows Vista).

  My current problem is that updated that kb3034344 fails to be installed. When I run the troubleshooter for update, he finds 2 questions and correct, but the same items are found whenever I run a convenience store. I downloaded the latest update problems resolution, and after running it then windows update also mistakes trying to find new updates (a 8024, 000). I was able to fix this before, but it always comes back to this specific update, do not install. I ran through several steps: any attempt manual repair windows update, reboot with all the services of the disabled package (clean boot), sfc, ongoing execution and one or two other thing I don't remember. I'd be happy to do a fresh install of windows, but I don't think I can do that with my Windows 8 upgrade disc, which may also be damaged and the cause of my problems. I don't have any running antivirus software.

  Any suggestions on what to do next? I can't install the update to Windows 8.1 due to failure of the update pending, and I think that is required to qualify for an upgrade to Windows 10 when possible.

  Fixed!... I am running Windows 8 on a machine that has been upgraded to Windows 7 (and initially Windows Vista).

  Assuming Win8 64-bit...

  Please answer each of the following [admittedly tedious] diagnostic questions in a list numbered corresponding type in your very next answer, preferably without quote this message:

  1. when (date about) you have to buy the Vista computer?

  1B. when (date approximately) did you upgrade Vista to Win7 computer (or when you did the new Win7 installation)?

  1 c. when (date about) did you pass the Win7 computer to Win8?

  2. What is the full name of your application or the third currently installed antivirus security suite (i.e., not Windows Defender!), if any, and when (date about) is your subscription current expires?

  3. what applications third-party a-squared (that is, not Windows Defender!) are installed, if any?  What third-party firewall, if any?

  4A give Norton or McAfee application ALREADY installed on the computer since you bought it?

  5. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on Vista computer When you bought it? (No matter if you have never used or activated).

  6a. is KB3038314, KB3042553, KB3045999, KB3045685, or KB3037580 listed in installed updates (not updated story) now? [1]

  6. How about KB3044374, KB3000853, KB3008273, KB2973544, KB2917499, or KB2871389?

  6 c. Windows 8.1 was never offered to your computer through shop Windows?

  7A. What Version & KB number update are displayed in the second line of text using IE10 | [Alt + H + A] tab. for example, Updated Version: 10.0.54 (KB1231231) ?

  7B. is Firefox, Chrome or any other alternative browser installed?

  8. is Adobe Flash Player v17.0.0.169 installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://www.adobe.com/software/flash/about/

  9. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. Registry cleaner CCleaner component)?

  =======================================================
  [1] Control Panel | Programs and features. See installed updates (in the left menu)

• I went to update and it won't let me update. It just says: to please quit and try again later and I continue fact that and still, it won't let me. My photoshop has not been updated in forever and my current photoshop lacks some fonts that I need fi

  I went to update and it won't let me update. It just says: to please quit and try again later and I continue fact that and still, it won't let me. My photoshop has not been updated in forever and my current photoshop doesn't have some fonts that I need to fix my Web site

  Hi jennah68228106,

  Please refer to the below given links:

  Troubleshoot Adobe Creative cloud download, install and update questions

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Do not install updates | Failure to update or U44M errors

  The activation and deactivation of Adobe problems

  Let us know if that helps.

• My Photoshop CC crashed. I clicked on the iCloud icon on my desktop and tried to update my Bridge and Photoshop, but they both failed. I retried and it has not yet. How can I get my Photoshop CC and CC rear deck?  I am preparing for an exhibition.

  My Photoshop CC crashed. I clicked on the iCloud icon on my desktop and tried to update my Bridge and Photoshop, but they both failed. I retried and they have not yet.  Help please

  Please see:error download or update Adobe Creative Cloud applications

  Error: "unable to install". Creative cloud office

  Error code 2 or 50: failure updating Creative Cloud desktop application

  I hope this helps.

  Concerning

  Megha Rawat

• Random virtual machines after vMotion and Storage vMotion network loss

  Hi all -

  I have a couple of tickets open with VMware and our supplier of SAN, EqualLogic, on this issue.  Since the configuration of our production and DMZ clusters we noticed that the virtual machines will sometimes drop network connectivity after a successful vMotion and Storage vMotion.  Sometimes, although much less frequently, virtual machines also spontaneously lose network overnight.  What happened only a few times.  The strange thing is that the other guests on the VM host are fine - they lose any network.  Actually, I can do no more than 3 computers virtual host to another, and 2 of 3 can switch correctly, so that we lose the network.  The work around?  Simply 'disconnect' from the virtual NETWORK card 'reconnect' and the virtual machine will start the return packets.  I can also switch the VM troubled return to the host State and it will find the network.  I can it reboot and re - win network.  I can re - install the virtual card completely, and she re - win network.

  VMware has seen a lot of mistakes of SAN in our log files in order to update us our SAN firmware to the latest version.  That seems to have fixed that but we still have the issue.  Here are some of the specifications - all environments are virtually identical except for memory:

  Of PowerEdge R810

  NICs Broadcom 5709

  EqualLogic SAN running 5.0.5 F/W

  We use frames.  ESXi is fully patched.  I haven't seen a boss or not, it is only some guest operating system that loses the network, but we are a Windows environment.

  When a virtual machine loses the network, we can not:

  • Ping to it
    
  • Ping it
    
  • Ping him at the virtual machines on the same host or vSwitch
    
  • Ping outside our network
    
  • resolve DNS, etc..
    

  I followed some KBs VMware without success, including:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003839
  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & externalId = 1002811 (port security is not enabled)

  -All the VMware tools have been updated to the latest version correct and corresponds to the ESXi host
  -Connected to the service ESXi console, I cannot ping the VM problem by name of host or IP address, but I can ping do not affected by the issue of the OTHER virtual machines.  I can also pings the service console.
  -Connected to the troubled virtual machine itself, I cannot ping other virtual machines, I can't resolve host names, I cannot ping by IP.  The machine virtual CAN ping itself by IP, but not hostname.  I cannot ping other virtual computers on the same virtual switch or network by either IP or host name.  I can't ping the vSwitch network management.
  -All vSwitches are configured in the same way and the same.
  -Notify the switches is set to yes
  -There are a lot of available virtual ports
  -We tried the E1000 and VMXNET virtual cards with no difference.
  -All cards are configured to negotiate, but we tried to force individuals speeds as well as with no difference

  I appreciate your help.  I have problems getting anywhere on this issue with the sellers.

  wkucardinal wrote:

  Still having the issue...

  Sometimes, it might be useful to really check that all uplinks VMNIC for all VLAN does work them. Try this is to create a new portgroup on the vSwitch used by your virtual machines on the host of the first, put a test VM on the portgroup, then go into the NIC teaming policy from the new portgroup and select "Override switch command failover."

  Then down vmnic all except one in unused, then only a single VMNIC is active. Then set the portgroup VLAN to a production of VLAN and try to see if we could ping some expected from the different addresses. If it works, then move VMNIC work until unused and move up to another asset. Try again, and this for all the vmnic. If it works, then you have verified that the configuration of VLANS and other settings are correct on the physical switch in the face of this host ports.

  If several VLANs, repeat the process for all other productions VLAN. Then repeat on the other hosts.

  While that may take some time, occurs if everything is properly configured on the physical switches. When occurs a vMotion virtual machine gets a new "Port code" and is assigned to a new outgoing VMNIC. If there is an error of configuration on one or more physical ports that might seem random, but may still happen on VLAN x on y VMNIC. Given that Port ID policy you use indeed spread randomly VMs on the vmnic these problems may be difficult to diagnose. (Make a disconnection of the VM vNIC gives the virtual machine a new port-ID, which it will move to a new outgoing VMNIC, which might seem to solve the problem.)

• vamicli update - check: failure: obvious editing error analysis.  Please contact your dealer.

  To better understand the process of update, I built two versions of my virtual device.  I installed the one 'old' and I'm doing it to check updates.  When I check for updates (with the web interface or the vamicli interface, below), I get the same error:

  vamicli update - check failure began: obvious editing error analysis.  Please contact your dealer.

  Now, I kind of cheated on the repository.  On my VMware Studio camera, I use the web server integrated and created a directory in/opt/vmware/www/ISV to use as a custodian, because I'm just trying to test such things out in my lab.

  Having done this, I can see in the newspapers of apache2 on my VMware Studio device it is manifest, indeed, read (I turned on the access_log):

  10.86.150.84---19/Aug/2010:18:50:35 + 0000-"GET /ISV/repository/manifest/manifest-latest.xml HTTP/1.1" 200 66821

  The build process had no problem putting a bunch of files in the repository, and it seems that the 'old' device becomes the file downloaded correctly.

  But he doesn't seem to like the file...

  Other things to note: I'm doing this in a laboratory without access to the internet and if no proxy either.  I was wondering if there were files that had to be pulled from the internet open to allow analysis to what appears to be the python .xml, but through some hacks that I don't even want to discuss, I do not see any other access on the web of the device when it tries to check the updates.

  I tried to strace the vamicli-update, but... There are a lot of things out there, and I can't find clearly something wrong.  Missing a lot of things, but the actual analysis (if it is really what is a failure) is far from clear.

  I found where the error message comes (with ropes), it's:

  libcmpiVAMI_Update_Provider.so

  which is not a surprise.  I can't find the source for this anywhere on the VMware Web site, so I don't know exactly what goes wrong.

  It is difficult for me to believe that he is really a parse error - somehow, I imagine that something in the environment is simply not true and that is causing the parser does not properly or maybe he failed even to the analysis.

  But if anyone has some answers (or ideas of what to try next), I would of course like to hear.  Thank you!

  The list of RPM packages installed in the virtual machine is analyzed once the build is complete, then the manifest is generated from that.  In this way, all additional packages which is drawn in ISO, etc. are included.

  -Matt