Update suspect

I have Win 7 32 bit installed Home and I had a suspicious research update presented to me 'Language updates', which was able to install. When I looked carefully at the description was not normal for a MS update, and when I ran check updated again once he disappeared. My question is did something to actually settle this update and there is a problem. Here is the capture of update that shows the description.

You are welcome!

Tags: Windows

Similar Questions

  • Upgrade to Windows 10 - FNTCACHE. DAT question

    Since the August 2015 update to my PC which is running Win7 Ultimate posted the problem of Cache of police and the only way I can keep from going to the BSD is to remove the FNTCACHE. DAT file, once it has started. Then, it works fine except it creates a number of directories .tmp in the system32 directory.

    My main problem is that because the upgrade to Win10 implies a certain number of reboots the PC's okay for the first and sometimes the second restart but fails then the upgrade because the have recreated the FNTCACHE. DAT file - when this product to upgrade stop and I come to Windows 7.

    any contributions to this issue would be greatly appreciated - Note - I went through remove updates suspect KB (2982791, 2970228, 2975719, 2975331) as well as deleting via the police register suspicious references files. (example - "C:\\Program Files\\Common Files\\Adobe\\Fonts\\AGaramondPro-Regular.otf") All this is allow a few restarts more before the above doesn't happen.

    Have you considered to perform a clean install and see if it solves the problem?

    How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

    You can save and give it a try:

    http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  • After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After having read a few tutorials, I suspect this deactivation were not made before

    After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After reading some tutorials, I'm suspecting this disabling was not made before reinstalling... Recommendations on resettlement in this case?

    You actually have a renewal LR5 problem or ask yourself what you need to do?

    Download and install the update LR 5.6 from here: http://www.adobe.com/downloads/updates

    Enter your LR 5 serial number and you should be ready.  If something doesn't work, then, please describe the problem in detail.

  • Firefox sends a message saying that there is a party trying to make me falsely to update my account. Source suspect.

    I have a prompt that looks like Firefox, which is a third party trying to use Firefox by requesting an update, but it is not a reliable source. Someone is trying to hack my browser?

    If he has problems with the update or with the permissions then best is to download the full version and trash the version currently installed to do a fresh install of the new version.

    Download a new copy of the Firefox application and save the file to disk on the desktop image

    Your personal data are stored in the Firefox profile folder, so you will not lose your bookmarks and other data to personal when you uninstall and (re) install or update Firefox.

  • Cannot leave a suspect site demanding that I have download an update "java".

    A website that itself charged when I visited a not - quite healthy (but not morally bankrupt) site now not allow me to close the browser. He insists that I have download an "update to my java" because of anxiety "of security-critical.

    It's completely absurd, but I used Task Manager to quit the application and now it's the page that opens as soon as I launch Firefox. Annoy her.

    Is there a way to stop executing the script and return to the State prior to this malicious site did his thing without major surgery?

    ************************************************************************************
    *** DO NOT CLICK*** The site URL is "http://www.downjava.info/update/ca/" *** DO NOT CLICK ***
    ************************************************************************************

    Thank you!

    Hello jambelly, open a new tab and enter Subject: config in the address bar (confirm the opinion). in there, search for the preference named javascript.enabled and double-click it in order to change its value to false. Then, it should immediately be possible to close the site scam in question. then return the preference javascript.enabled...

  • Since the update Firefox 6.0, some websites do not load correctly. I suspect it has to do with the Java being disabled because of the compatability modules. When I try to go to Tools/Add-ons, I get the message "Loading" for several minutes without chang

    Update Firefox 6.0 is useless to me because many websites I visit are not displayed properly, I guess because the Java modules are disabled because of incompatibility. They appear correctly in Internet Explorer.

    In addition, the add-on from Trend Micro is not compatible, which leaves me with a positive feeling.

    When I try to check to see if these modules can be updated, the menu item Tools/Addons just goes to a page with "loading" and stays there for several minutes without change until I close it.

    I would like to know the procedure to regularize this version of Firefox to my previous version that worked.

    Firefox 5.0/5.0.1/4.0/4.0.1 and earlier 3.6.20 all contain questions of security and stability that will not be corrected. You put your system at risk by using any version of Firefox that 6.0 or 3.6.20. Any person who displays a link to other versions is to be irresponsible, in my opinion.

    Java

    If the incompatible extensions in Add-ons > Extensions are Java Console, you have no need them unless your doing Java development. Most of the users have not yet installed, but Java will install Java Console with each update. You can delete them manually:

    The only thing that affects the functioning of the sites/Java applets on the web is the plugin (Add-ons - > Plugins) "Java (TM) Platform SE (version)". Do not forget that it is enabled and that you have not all extensions which affect/block "scripts".

    Trend Micro

    You must contact Trend Micro or go to the forums on their website to inquire about their plans to update the add-ons/toolbars they install in Firefox.

    Problem with the display of the Add-ons Manager

    The Add-ons Manager gets in a loop of loading due to the recent update of Firefox 6 and servers being overloaded because users and update process are looking for updates to the add-on. If you stay away from the "Get Add-ons" selection on the left of the screen of the add-on Manager, you should have no problem with that. This situation is expected to resolve when the overload of Firefox 6 update is complete. I do not always use this "Get Add-ons" option, instead, I go to the website of modules and the search for what I want from there: https://addons.mozilla.org/en-US/firefox/search/?q=clone & cat = all & x = 0 & y = 0

  • Satellite P200D-137 - suspected of BIOS update failure

    Hello

    My friend asked me to watch his old Satellite P200D of 2 days. He decides to perform the recommended Toshiba updates, after leaving the machine (plugged) and return after about an hour, he was off.

    Now switch on the machine causes a black screen with just the hard drive, fans and dvd burner, turning the power on. This being the case, I feel, it was a BIOS update he did this failed. Is it possible to recover from this at all?

    Thank you

    You know with certainty that it was done. If the BIOS update is screwed up, it can be problematic, and I'm afraid there is nothing you can do alone and without service.

  • Windows updates is disabled and I don't know why. I suspect that McAfee.

    original title: automatic updates

    Have Windows XP. Have McAfee. Windows automatic updates is disabled. Do not know why. Have tried everything turning. Any ideas?

    Go to control panel and click on Administrative Tools

    Now, double-click Services and find automatic updates.

    Make sure that the status is (road) and the Startup Type is (automatic). If this isn't the case, then double-click on and difficulty.

    Good luck

  • Cannot use Windows Update, firewall, Live games. Suspects of virus?

    Hello

    I am currently using an Alienware M17x and there are a few problems.

    Recently, I downloaded a game requiring a signature in Windows Live games and order I had to update the client. However, Games for Windows Live could not update and gave me an error code of 0 x 80070424. I also got this same error code when I tried to turn on the firewall in pressinng the button "Use recommended settings" in the control panel > system and security > Windows Firewall page.

    I then tried to manually install the Games for Windows Live client, but he couldn't do it because 'a required Windows component is disabled on your machine. I checked the fix for this problem in the Microsoft Web site, and he asked me to locate the "Background Intelligence Transfer Service' in my services, which has proven to be missing. Also, the automatic update service disappeared.

    Another problem that I recently noticed was that audio files randomly the movies will begin playing while my computer is running. I first thought that it was a website or popup while I was surfing the net, but I closed all the programs I was running, and the noise continued to play. Goose bumps...

    I did some reading, and the closest thing I can relate to this is the Conficker Virus, but I hope that it is something more easy to remove...

    Any help is greatly appreciated, because this virus seems to be the stubborn type!

    You may need to restore the factory settings, so be sure to back up any data you want to save while you still can.  In the meantime, here are some things you can try.

    Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

    -

    Microsoft has suggestions and offerings to

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

    -

    Moderator Forum Keith has a few suggestions along this line to

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

    -

    If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

    -

    You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

    -

    Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

    `

    When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

    -

    I hope this helps. Good luck.

  • My inner smartdrive dvd player won't read DVDs more.  I have updated to Snow Leopard in Yosemite.

    I am currently using OS X Yosemite 10.10.5.  I bought in 2009 iMac with Snow Leopard and have to Lion then updated my current operating system.  The internal dvd player has worked with much fussing, (insert the disc - closing - turn after a wait - by pushing the drive when he jumped on reboot).  If I had the chance after a few hours, the video disc show up on my desk.  When this happened, I was opening the dvd player that was in the Finder and the disc would play. I also tried to open the dvd first player and then insert the disc.  That no longer works.  Yesterday, only it just stop working.  The reader still takes dvd and swirls and click as before but then ejects the dvd. Repeatedly stop and restart is no longer works.  I make sure that the dvd be clean before I use it and have tried many different DVDs without success.  I think it's a software issue.  Does anyone have an idea/instructions a nearly dead grandmother brain that can follow to update or redate back to original factory setting to help this poor Smartdrive not so smart?

    I have no TV, only my computer and phone at low prices.  I need to watch that my library borrowed from the dvd.

    Thank you.

    Try a cleaning CD/DVD

    You can also try to clean by:

    How to clean a Superdrive DVD using a credit card!

    I suspect the optical drive has failed. My 2009 Mac Mini could not shoot with same symptom 4 years ago.

    To confirm a drive failure, insert a Snow Leopard installation DVD and try to start with the C key.

    If this isn't the case, they drive could not be started.

    I would just get an external optical drive, one powered with an AC adapter. The Superdrive Apple USB does not work without a hack.

    This is the Office Mac Pro forum. I asked that your post moved to the forum of Intel iMac or another appropriate forum.

  • How can I get my backup iOS9 stick? 'Restore backup' updates automatically to iOS10 once again without asking me first.

    Title says it all. I HATE iOS10 and I have a backup of iOS9 into iTunes from just before the update, but whenever I try to "restore from backup" it automatically updates new back 10 without asking me.

    Help, please. 10 is a total disaster on my iPhone 5s; endless crashing and overheating. I just want my phone works again... and dump iOS10 like a bad date.

    Latest version of iTunes is running. 10.9.5 OS on a Macbook Pro.

    Sorry, but you cannot go back to 9. It is not an option. I have two iPhone fives on iOS 10.0.2 with no problems. Your must not be crashing or overheating. I suspect a corrupted app that comes back with the restore of the backup. Can try a restore as new to test.

  • Firefox runs very slowly after updating Windows 10

    Saturday, December 12, 10 Windows spent an age of update itself, with several reboots. Since then, the navigation is horribly slow with Firefox, although my internet connection is always very well (fast my Smartphone using Microsoft Edge). I have two PCs, and both seem to have been affected in the same way. Using the Task Manager, I see that Firefox uses a lot of CPU most of the time - often more than 50%. Even typing and scrolling are very slow, not just downloading.
    I disabled all my add-ins and plug-ins, run in safe mode, rebooted and reinstalled Firefox without result. So far, I'd say that Firefox is the fastest browser. I think that Firefox updated itself 42.0 version a few days, so I have a suspect that this slowdown has occurred just after a Windows Update.

    Update: Windows update itself again today and, like magic, Firefox is again well. So problem solved.

  • Impossible to update Windows 10 anniversary

    Hello

    I'm updating the partition Boot Camp on my Mac mini end of 2014. I use the Windows Upgrade Advisor 10. Everything seems to work ok but when the update is done and I start again under Win 10 I'm back to the previous version, 10240. I suspect it has to do with the graphics driver Intel 5100 Iris. I came across this problem with a previous update and managed to get through by removing the graphics driver Iris 5100.  This does not seem to solve the problem this time.

    Anyone got any ideas?

    It's the ISO 1607 available from Microsoft? If not, can you put the name of the file you are using?

  • Firefox guard connection for updating servers despite the changes to the settings to stop this behavior

    I created a user.js that integrates the https://support.mozilla.org/en-US/kb/how-stop-firefox-making-automatic-connections and other settings, but Firefox for Android is still trying to connect to multiple addresses that appear to be Mozilla updates related (63.245.217 * aus4.mozilla.org).

    Review of about: config confirms user.js was recognized.

    User.js: http://pastie.org/private/syyzqotsooclhwnuoxqo7w

    Firefox for Android version 41.0.

    Does anyone know of another tweak I should do which could solve this problem?
    If this is not resolved here, where should I try next?

    Note: I'm not suspecting anything harmful. The merits of this particular user.js are out of scope for this question. It is just a base where no connection is made without the consent of the user and not for regular use.

    This question has been posted to the following locations, with no solutions.
    https://support.Mozilla.org/en-us/questions/1088951
    http://forums.mozillazine.org/viewtopic.php?f=47 & t = 2968493
    http://Android.StackExchange.com/questions/126168/Firefox-for-Android-mysterious-connections-after-turning-everything-off-in-Setti
    https://www.reddit.com/r/Firefox/comments/3q77a5/where_can_i_get_a_reply_to_this_question_about/

    The solution is to assign to media.gmp - manager empty .url.

  • How can I get rid of this suspicious popup: 'your video player Firefox must be updated. Last version released: 12 September 2015 "?"

    I believe that I have a piece of malware affecting firefox. I frequently get a popup, allegedly from Mozilla, saying: Your Firefox video player needs to be updated. Latest published version: [today].
    Malwarebytes didn't find anything. Trend Micro is nothing. I can't find anything. Can you offer any help.

    If you are interested to try other free malware scanners, here's a list:

    However, I suspect that the problem may be caused by one of your addons. I think that maybe it's the MediaPlayer 3.3.2 available to you.

    Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

    More information on the use of safe mode can be found here:

Maybe you are looking for

  • MacPro UPS connection.

    Would it not be smarter to cut and edit the OEM for a Macpro 2010 power cable so that it fits in an APC ups on or cut and connect a surge protector power cable so it can fit into an APC out and have all its points of sale back to the UPS?

  • Satellite A210 - 128 (PSAELE) - where can I ge drivers Windows XP?

    Why is there no support for Windows XP drivers for this particular model (I see only 6 drivers at the link below, and most of them are firmware updates)? Where are the audio drivers, ethernet, graphics drivers, chipset drivers drivers...? http://EU.c

  • delete the search yahoo on chrome engine

    Recently (although this seems to be an older problem for Windows users), my default search engine has been hijacked to display Yahoo whenever I click on 'new tab' on Chrome. It's happened on Safari, but solved the problem by changing the default sett

  • convert the format of output in text buffer

    I received an ASCII output a signal source Analyzer I would like to convert in a readable text format. In the vi attached (LV2009) chain of read buffer control contains the data that I get and I put a free label on the Panel before which contains the

  • LBP-430 laser beam printer

    Yes I know the printer is old.   It was working fine.  I don't have the software or drivers to run on windows 7 or 10.  Are there software and drivers to work this old printer under windows 7 or 10?