Update the form called the calling form update

Similar Questions

• update the table account via a form

  Is this possible?  To create a section of the E10 form, there isn't a way of conceiving the fields into account in the form.

  We have an internal process to capture the customer account information on a quarterly cycle of our area reps.  We would like to set up a form so that they can write to the table account, while having only not to change after submission.

  Hello J,

  You can move values across tables using rules of deduplication (for identical records) and managers (update record). Here are under Contacts > data tools > rules of deduplication. You are right that the forms will only allow you to update Contact fields, but you can add a processing step to your form 'Add program', where your program includes a step of type 'run a game/deduplication rule '.

  That said, we recommend that you not data update CRM account Eloqua (I am not sure if that's your intention, but wanted to mention). Your CRM data into account should be the gold standard - data are updated only in that application and not by Eloqua or a different database. If you're just doing this for reporting purposes with Eloqua, it is fine, but you will notice that it didn't there no external call for 'update account' in Eloqua.

  Hope that helps!

  Thank you

  Gaia

• Refresh of Page partial update of form before the data control returns the new value

  Hello
  
  I have a set of paintings of master detail based on a single data source (Session Bean encapsulating a web service call). The high-level table (t1) shows data of opportunity, as the low level (t2) poster contacts for a special occasion. When the opportunity is selected in t1, the contacts associated with this opportunity appear in t2. These tables of work as you wish.
  
  I have a read only form (form of the Panel layout) based on a different data control (supported by a Session Bean that calls a LinkedIn API and a table of database using EJB3 entities). LinkedIn Session Bean method takes a parameter which I get from the current row in t2. (#{bindings.relatedContact.currentRow.dataProvider.id}) I put the PartialTriggers as 't2' on the form.
  
  When the page is loaded for the first time, the first line (line A) from table t2 is selected and the display shows the data associated with this line. If I select another line (line B), the Session Bean is called with the value of the id of the newly selected row, but the display will show the associated data from line A. Thereafter, whenever I select a row in t2, bean is called with the new value, but the form displays the data from the selected line previously.
  
  I guess what happens is that the form is refreshed (using stale data in the data control), and then the call to the session bean is made. I checked using thread and print statements. Sleep() in the bean.
  
  Is this a correct behavior and how can I make sure that the call to the bean occurs before the form is updated?
  
  I use JDeveloper version 11.1.2.2.0
  
  Thank you
  Michael

  Hello

  as answered on StackOverflow, the trick is to set the refresh option on the iterator (s) to the second access WS (table 2) of PageDef on ifNeeded. The default setting is delayed, which in your case is not optimal because refresh occurs during rendering response, which is too late for the access of WS. Try "ifNeeded.

  Frank

• Update the form of CSV courses and also to pre-fill adapter

  Hello
  
  I'm trying to provide a resource using the IOM API, which I am able to do successfully, but I also have a requirement to update the shape of a CSV file process. When I try to read and update CSV, it cancels the values populated pre-fill adapters even when they are not provided by the WB.
  
  Here's the logic I used:
  
  (1) read the CSV data
  (2) user of MSN search
  (3) resources available
  (4) treat the value form data after reading process values form a CSV.
  
  As soon as the data of the form process set the task runs, it updates the other fields (i.e. which are not provided by CSV) with a null value.
  
  Please let me know if there is another way that I can put a few of the fields in the CSV process form without destroying the remaining values.
  
  Thank you
  Rahul

  (3) formInstanceIntf to set processes form data by using setProcessFormData (proInstKey, map)

  I hope that you send only a few attributes in your card, not all of the attribute (attributes that were part of prepopulate).

  If so, it should not happen.

  Workaround solution:

  You have processInstanceKey
  Retrieve existing data in the form getProcessFormData
  Make a card with existing fields and values and add your new fields and their values, and call setProcessFormData

• Form of WSAuthorizationException and update the issue?

  HI Jay
  
  Error
  Exception of XPRESS:
  Cannot call getObject on class com.waveset.ui.FormUtil method == > com.waveset.util.WSAuthorizationException: discover and access denied to the subject stst00d on user: stst00d.*
  
  
  I get this error in the console users idm when I click Show Inbox item.
  
  and 2. I have the box whenever I am clicking on that form to get refreshed and become refresh the data that I entered in the text box, so I want to keep the data if I check or uncheck the box?
  
  ?
  I use Sun idm 7.1
  
  want to help its urgent to remove this error.

  Here's the example form, I created and all values are sticking to their place when to check and uncheck the box.nc

  In your code, you used the text box with VALUES and whenever that form get updated and set the values that you set.

  Use the code below for reference. nothing special you need to do...

  
  
  
  
  
  10
  
  
  100
  
  
  true
  
  
  
  Please enter comments
  
  
  
  
  
  
  
  
  
  
  
  
  
  

• Problem with the update of the registration form

  I have a registration form to update that uses a < cfquery > function and has (among other areas), an optional file input field and two separate fields to specify the file name and the file type. I don't get any errors when I submit the form, but it does not update the record and not redirects to the page specified in the < cflocation > function. Instead, it reloads the page updated with all the deleted values record. The cfquery function is copied below. Any ideas what I'm missing? I am relatively new to CF and sql, but comparing to other forms of record update I have for other tables, I can't find a problem.

  <cfif IsDefined("FORM.MM_UpdateRecord") AND FORM.MM_UpdateRecord EQ "content_edit">

    <cfquery datasource="everettweb">UPDATE Content

  SET Page_URL=<cfif IsDefined("FORM.Page_URL") AND #FORM.Page_URL# NEQ "">

  #FORM.Page_URL#

  <cfelse>

  ''

  </cfif>

  , Page_Category=<cfif IsDefined("FORM.Page_Category") AND #FORM.Page_Category# NEQ "">

  #FORM.Page_Category#

  <cfelse>

  ''

  </cfif>

  , Content_Description=<cfif IsDefined("FORM.Content_Description") AND #FORM.Content_Description# NEQ "">

  #FORM.Content_Description#

  <cfelse>

  ''

  </cfif>

  , Content_Heading=<cfif IsDefined("FORM.Content_Heading") AND #FORM.Content_Heading# NEQ "">

  #FORM.Content_Heading#

  <cfelse>

  ''

  </cfif>

  , Content=<cfif IsDefined("FORM.Content") AND #FORM.Content# NEQ "">

  #FORM.Content#

  <cfelse>

  ''

  </cfif>

  , Image_URL=<cfif IsDefined("FORM.Filename") AND #FORM.Filename# NEQ "">

  /images/#FORM.Filename#.#FORM.File_type#

  <cfelse>

  ''

  </cfif>

  WHERE ID=#FORM.ID#

  </cfquery>

    <cflocation url="#FORM.Page_URL#">

  </cfif>

  Thanks for any help you can provide!

  Jeremy

  Okay, so I rebuilt the page, and it worked. When I compared both versions it looks like when I did a montage for the sql, I had a bit of redundant code in the form that would throw things off. Thanks for all your help!

  Dan, with regard to the two types of variables, the URL variable that's so I can fill in the form with the data in the existing record. Here's the process:

  -Main page has a link to change the content, which is identified by the ID number.

  -The link change calls the form of update: content_editor.cfm? recordID = #ID #.

  -A queries on the calls page of content_editor.cfm for the data Records using the url variable (because at this point, it is the only remaining identifier from the previous page) to fill out the form.

  -A second query updates the record on form.

  If there is another way to do it, I don't know. I left Dreamweaver show me one way, and then I adapted this method to a couple updated various registration forms. I'm certainly open to other suggestions!

  JAW

• How to simulate the form-update which is used by messageBox

  Hello

  I use a script object to my function to add/remove lines in my PivotTable.

  If I do NOT use the messageBox whenever I call the function, I get some problems with my index of the table. T

  It would be too difficult to describe all aspects of my code, so let us cut a long story short.

  MessageBox is a kind of update the form. How can I simulate this update without using messageBox?

  XFA. Form.Recalculate (1); does not at all help

  function addORremoveRow (myCheckBoxAsObject) { }

  xfa.host.messageBox ("without me any updated!");

  ... If checkBox "off the table" = click on-> add row

  ... If checkBox "off the table" = clicked-> delete line

  }

  I'm not able to tell you what's wrong with your form, so I would need more information.

  So I guess that your need to add something like xfa.layout.relayout (); to your script.

• How to insert the last updated date and user id to a form?

  Hello
  
  I created a form to enter data into a custom table.
  When a new record is created, I want to keep track of the date created, last updated date, and who (user id) enters the form.
  
  Can you please help or point me to a good place to look for this information?
  
  Thank you!
  LC

  Create four new columns in your table called Created_On, Created_By, Last_Updated_On and Last_Updated_By.

  You can create a trigger for the rest:

  create or replace trigger ""
    before insert or update on ""
    for each row
  begin
    if inserting then
      :NEW.Created_On := sysdate;
      :NEW.Created_By := v('APP_USER');
    end if;
  
    if updating then
      :NEW.Last_Updated_On := sysdate;
      :NEW.Last_Updated_By := v('APP_USER');
    end if;
  end;
  

  Whenever you will add or modify data in this table, the trigger will automatically fill these fields.

  Kind regards
  Mathieu

• How to upgrade only the UPDATED / CHANGED column in a FORM

  Hello
  
  I have a FORM that is based on a table to say... TABLE1:
  When create/apply changes.. .He calls the default process DML and does the insert/update of the TABLE1 table.
  
  at the same time, I have other processes PL\SQL... who does the insert/update manual in the other table... TABLE2 for some pulse columns col1, col2, col3...
  
  When I'm in UPDATE mode and have not changed the column col1, col2, col3... even my next manual update will be pulled... The AUDIT is run, and it updates the last_update_date & last_updated_by...
  HOW TO AVOID THIS PROBLEM?
  

  update table2
       set col1 = :p_col1, 
            col2 = :p_col2, 
            col3 = :p_col3

  Thank you
  Deepak

  Deepak,

  You can change your trigger to address this issue...

  IF :new.col1 != :old.col1 OR  :new.col2 != :old.col2 OR  :new.col3 != :old.col3
  THEN
  :new.last_updated_by := v('APP_USER');
  :new.last_updated_on := SYSDATE;
  END IF;
  

  See you soon,.
  Hari

• Form based on a Table, only updated authorized, form does not display the data

  Hello
  
  I created a form based on a Table by the corresponding wizzard. The table has only one line. The shape didn't create or delete buttons, only update & Cancel is allowed. The PK (id field) is hidden and it takes the value of a database trigger when insert (in fact never is apllied because there is no Create).
  
  When the form is called it is already displayed in update mode, with cancel button allowed but not data in the fields. Line seems ok, session data available null to variables/positions. No idea why this is happenning? I expect to HAV the data in the form fields.
  
  TIA

  Hello

  Your primary key item have no value, I guess.
  Create calculations to set the value of the item that is in this single line in your table

  BR, Jari

• App Server 10 g 2 - PDF reports called from forms go to a window in the background

  Hi all
  
  We have Application Server 10 g 2 in use, mainly for the old forms and reports. We also have installed Secure Java Web.Show_Document (frmrwinteg.jar) bean. Since the application of the October 2008 CPU when a form called a PDF report, he will pop in the background and leave the Internet Explorer window with the shape to the front. We have not changed the configuration settings that can affect it.
  
  Is there a way to get back to the old behavior, that to have the report appear in the foreground instead from behind internet Explorer? We would appreciate advice on this. Thank you.

  Sebastian,

  I had the same problem, but it turned out not to be the result of a CPU. If you use the Sun JRE instead of
  JInitiator, the JRE version could be your culprit. Our production customers are on of the JRE (Java 6 Update 4) 1.6.0_04
  (Java Runtime Environment). Forgive me if this is something that you already know. I just thought I would clarify in order of
  efficiency. 1.6.0_04 using, all of our reports are open in their own new instance of Internet Explorer in the foreground. Our
  customers do not have admin access to their machines, so they can't install the JRE updates. I recently installed
  1.6.0_11 (Java 6 Update 11) on my development machine and all of a sudden all the pdf reports go to the background,
  It doesn't matter if I use the application development, Validation or Production Server. The processors are tested on
  the development server before being moved to production, so our servers are fixed at different levels. I have
  uninstalled 1.6.0_11 roll me back to 1.6.0_04, which is always installed and magically all my reports go the
  to the foreground again. Is it possible that this or a different version of the JRE is installed on clients around the same
  time that you have installed the CPU? I hope this helps.

  Jason

• Help with code to insert, and then update the form table.

  I have a form where a user can add a new record in a table. Here is the procedure for recording button that works very well. But I call another procedure for updating the table with an "if" statement "The SQL code that I use works fine to get the data I'm looking for when I run it in SQL, but the 'if' statement updates all records in the table to ' n ' when some should be"Y". I am new to Oracle forms development (3 months) so it's probably very simple, but I'm stuck and need to get this finished form. Any help is greatly appreciated.
  
  
  SAVE BUTTON TRIGGER PROCEDURE:*.
  
  PROCEDURE SAVE_MM_1099_ADD IS
  
  MM1099_NO NUMBER (10);
  NUMBER OF THE YEAR (4);
  NUMBER OF NOTICE_SEQ_NO (10);
  NOTICE_NAME VARCHAR2 (30);
  TIN_FROM_DB VARCHAR2 (23);
  TSDI_DB VARCHAR2 (1);
  IRS_NTYPE VARCHAR2 (10);
  IRS_NDATE VARCHAR2 (10);
  BU_WH VARCHAR2 (1);
  NO_TIN_NAME VARCHAR2 (1);
  DUP_IRS_NOTICE VARCHAR2 (1);
  G1_IRS_NOTICE_3YR_2BS VARCHAR2 (1);
  
  B_SAVE_ADD boolean;
  
  Start
  
  IF MM1099_NO IS NOT NULL THEN
  
  insert into MM_1099
  (
  MM1099_NO,
  YEAR,
  NOTICE_SEQ_NO,
  NOTICE_NAME,
  TIN_FROM_DB,
  TSDI_DB,
  IRS_NTYPE,
  IRS_NDATE,
  BU_WH,
  NO_TIN_NAME,
  DUP_IRS_NOTICE,
  G1_IRS_NOTICE_3YR_2BS
  )
  values
  (
  MM1099_NO,
  YEAR,
  NOTICE_SEQ_NO,
  NOTICE_NAME,
  TIN_FROM_DB,
  TSDI_DB,
  IRS_NTYPE,
  IRS_NDATE,
  BU_WH,
  NO_TIN_NAME,
  DUP_IRS_NOTICE,
  G1_IRS_NOTICE_3YR_2BS
  );
  
  
  : system.message_level: = '5';
  Commit_FORM;
  : system.message_level: = '0';
  
  END IF;
  
  UPDATE_NUMOCCURTIN;
  
  END;
  
  PROCEDURE CALLED:*.
  
  PROCEDURE UPDATE_NUMOCCURTIN IS
  
  CURSOR c1 (NUMBER NUMOCCURTIN) IS
  SELECT THE YEAR, TIN_FROM_DB, COUNT (TIN_FROM_DB) AS NUMOCCURTIN
  OF MM_1099
  TIN_FROM_DB GROUP, YEAR
  SEEN (COUNT (TIN_FROM_DB) > 0);
  
  CR1 c1% ROWTYPE;
  number of v_recs;
  NUMBER OF NUMOCCURTIN;
  
  BEGIN
  v_recs: = 0;
  
  OPEN c1 (NUMOCCURTIN);
  
  loop
  
  Fetch c1 into cr1;
  When the % notfound c1 or c1% rowcount output > v_recs;
  
  IF cr1. NUMOCCURTIN > 1 THEN
  
  UPDATE MM_1099
  SET DUP_IRS_NOTICE = 'Y ';
  
  ON THE OTHER
  
  UPDATE MM_1099
  SET DUP_IRS_NOTICE = 'N';
  
  : system.message_level: = '5';
  commit;
  : system.message_level: = '0';
  
  END IF;
  
  v_recs: = v_recs + 1;
  
  END LOOP;
  
  CLOSE c1;
  
  END;
  
  For any help or suggestion will be greatly appreciated.

  IF cr1. NUMOCCURTIN > 1 THEN

  UPDATE MM_1099
  SET DUP_IRS_NOTICE = 'Y ';

  ON THE OTHER

  UPDATE MM_1099
  SET DUP_IRS_NOTICE = 'N';

  : system.message_level: = '5';
  commit;
  : system.message_level: = '0';

  END IF;

  There is no WHERE condition in your update, so always update you all THE RECORDS in your table. I guess it must be something like:

  UPDATE MM_1099 SET
    DUP_IRS_NOTICE = 'Y';
   WHERE TIN_FROM_DB=cr1.TIN_FROM_DB
     AND YEAR=cr1.YEAR
  

  Some general order questions about your code:
  Where your variables for your insert statement are filled? looking at your code they will always be NULL.
  Be careful when using the variable exactly as the names of column names. This may cause unexpected behavior (for example when it is used in the UPDATE statements).
  Why engage in the other branch, but not in the branch so?

• Update form field based on the evolution of the Organization

  Hello Forum!
  
  This is my first post, as I'm new to IOM, I'll try to explain the problem as specific as possible.
  
  The situation:
  
  We have some sso devices, each of them associated with an organization with a search, so when you create a user, based on the name of the Organization, a predefined resource is associated with the identity. For this, we use an adapter pre-populate the form of resources.
  The problem arises when we move from a user to other agencies, I can't get this update automatically value.
  I capture the event of organizational change using the process task 'User to move' with a dummy adapter that returns true and calls the "Update SSOAPPLIANCE" task that downloads the device identification information.
  All tasks are running, but the form process remains the same.
  
  Is it what can I do to make this process of automatic update?
  
  Thanks in advance.
  
  Xisco Fernández.

  Hello

  I'm not sure, but if your type of variable is this resource, then you can set it as a String.OIM will convert him at length internally. If this isn't the case, then Yes you must get the key of the resource COMPUTER in the name of the resource and then update in the form of process.

  Let me know if you have any other questions.

  Concerning
  Nitesh

• updated Mac and now I am unable to answer the phone calls of the Mac

  Yesterday I updated my Mac to the new operating system.  Since then, I could not pick up calls from the Mac as I used to.

  Can someone tell me how to solve this problem?

  Hi jlfrisella!

  I see that you are unable to use the calls feature cell phones iPhone on your Mac since the update to Mac OS Sierra.  I can understand wanting this function runs on the right, and I'm happy to help you.  Please see requirements and instructions in the following articles.

  Continuity of use to connect your Mac, iPhone, iPad, iPod touch and Apple Watch

  Thank you for using communities of Apple Support.

  See you soon!

• How can I make a phone call from Apple Watch after the update of the software lasted?

  I don't know how to make a phone call from my Apple Watch after this update. I need help

  Hello

  Under watch OS 3, the friends feature (which was available in previous versions) comes over and there is no direct replacement for it.

  When making calls or sending of new messages, contacts instead can be selected via the phone and Messages applications or using Siri:

  • Messages: https://help.apple.com/watch/#/apd92a90f882
  • Calls: https://help.apple.com/watch/#/apdc38d7a95e