Update the form of CSV courses and also to pre-fill adapter

Similar Questions

• I use Acrobat DC and I'm unable to open a PDF file on a Web site. Whenever I click the link it says that my drive is not updated. I've updated the player several times now and it always used open. Other documents open on this Web site.

  I use Acrobat DC and I'm unable to open a PDF file on a Web site. Whenever I click the link it says that my drive is not updated. I've updated the player several times now and it always used open. Other documents open on this Web site. http://www.cic.gc.ca/english/pdf/kits/forms/IMM1344E.pdf

  Hi kimberlys49504344,

  It is an XFA file that is not detected by the PDF viewers in the web browser.

  Please right click on this link http://www.cic.gc.ca/english/pdf/kits/forms/IMM1344E.pdf & select ' Save As... ', now, to save the PDF file to your desktop & open with Adobe Reader.

  I'm sure that it will work as it worked on my end.

  Kind regards

  Nicos

• After that I went to El Capitan, my computer would be close and take forever to reboot.  I took it to the Genuis Bar and they said it was us who extinguished the FileVault.  I've updated the software on 1: 1 and now, I'm having the same problem

  After that I went to El Capitan, my computer would be close and take forever to reboot.  I took it to the Genuis Bar and they said it was us who extinguished the FileVault.  I've updated the software on 1: 1 and now, I'm having the same problem again.  The computer turns off and sometimes it takes me an hour or two to get started again.  Help, please!

  refer to this article and move forward with the NVRAM reset at the end.

  Reset the management system (SCM) controller on your Mac - Apple Support

  If the problem persists, how long have you made it Go?

  I would bring out there, but first call Apple.

• We try to update the software on a computer and continue to receive the error 1719:

  We try to update the software on a computer and continue to receive the Error Message 1719: "Installer cannot access the Windows service". We tried to repair Windows install several times by the cancellation of registration registration without success. Windows Installer continues to block the update of the program

  We tried to install a new version of Kaspersky and have met the above problems.

  Hi Jug,

  Thanks for posting the question on the Microsoft Community Forums. I understand that while trying to update the software, you get an error 1719: "could access the Windows service install.

  This question is can be caused due to:

  You install or remove a program that uses Microsoft Installer Service to install a program on your computer. The Windows Installer Service is not running. The Windows Installer registry settings may be damaged or wrong.

  I suggest you check out the link to the troubleshooting steps.

  Error "The Windows Installer could access the Service" when you install or update programs on Windows 7 or Windows Vista.

  http://support.Microsoft.com/kb/2642495

  WARNING:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

  How to back up and restore the registry in Windows.

  If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• How to make a stationary State (or equivalent) for the form to change color and reveal some hidden above text...? is there a widget I could use?

  How to make a stationary State (or equivalent) for the form to change color and reveal some hidden above text...? is there a widget I could use?

  There are many solutions. A more simple: put the text and the items colored in the back and put the 'shape' on it. Configuration of the 'shape' become transparent in a stationary state.

• It has been updated the program on my computer and all of a sudden stopped at 83.3% can help

  It has been updated the program on my computer and all of a sudden stopped at 83.3% can help

  Hello

  Could you please provide the name of the application you are trying to update.

  Kind regards

  Hervé Khare

• most of my desktop icons present in the form of PDF files and I can't run the shortcut.

  As soon as I install Acrobat Reader DC most of my desktop icons show in the form of PDF files and I can't run the shortcut.  When I hit the icon (shortcut) I get an error msg saying it not good pdf file

  Hi kenc10782958,

  Please see this KB Application, file icons change in Acrobat/Reader icon for the troubleshooting steps.

  Kind regards

  Nicos

• Production Manager OID field using the pre-filled adapter

  Hi all
  
  I created a pre-fill adapter that uses the first name and the user name and add the Manager field of DIO during deployment.
  But during commissioning, I'm Naming Exception.
  
  This is what I found in the JBoss application server.
  
  09:30:58, 828 INFO [STDOUT] running CONCATENATEVARS
  09:30:58, class of target INFO [STDOUT] StringUtil = 828
  09:30:58, 921 INFO [STDOUT] running CONCATENATEVARS
  09:30:58, class of target INFO [STDOUT] StringUtil = 921
  09:30:59, 640 INFO [STDOUT] Running GetTargetAttributeMapping
  09:30:59, 703 INFO [STDOUT] Running GetProcessData
  09:30:59, 859 INFO [STDOUT] running SHOULDUSEXLORG
  09:30:59, 875 INFO [STDOUT] class of target = java.lang.Boolean
  09:30:59, 875 INFO [STDOUT] running SHOULDUSESSL
  09:30:59, 875 INFO [STDOUT] class of target = java.lang.Boolean
  09:30:59, 875 INFO [STDOUT] running CREATEUSER
  09:31, 203 INFO [STDOUT] class of target = com.thortech.xl.integration.OID.tcUtilOIDUserOperations
  09:31, 250 INFO [OID] parameter Variables passed in com.thortech.xl.integration.OID.tcUtilOIDUserOperations:tcUtilOIDUserOperations(s,s,s,s,s,o,o,b): are sServ
  sPort = 3060, sPrincipalDN = cn = orcladmin,.
  09:31, 281 INFO [OID] parameter Variables passed in com.thortech.xl.integration.OID.util.tcUtilLDAPOperations:tcUtilLDAPOperations(): connection Variables are: are
  is cn is orcladmin, sProviderURL = ldap://192.168.109.140:3060,
  09:31, 281 INFO [OID] parameter Variables passed in com.thortech.xl.integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S): are sContainerDN = cn = users,.
  ER8,
  09:31, 343 INFO [OID] com.thortech.xl.integration.OID.util.tcUtilLDAPOperations: connectToAvailableOID(): SSL option is not selected in ITResource
  09:31, 359 INFO [OID] parameter Variables passed in com.thortech.xl.integration.OID.tcUtilOIDUserOperations:formatOrgDN(s,s): are sOrgDN = cn = users, sRootDN =
  09:31, 359 INFO [OID] parameter Variables passed in com.thortech.xl.integration.OID.tcUtilOIDUserOperations:isObjectExists(S,S): are sContainerDN = cn = users, dc
  09:31, 375 INFO [OID] parameter Variables passed in com.thortech.xl.integration.OID.util.tcUtilLDAPOperations:search(S,S,b,S[]): are pSearchBase = cn = users, dc =
  09:31, 390 INFO [OID] parameter Variables passed in com.thortech.xl.integration.OID.util.tcUtilLDAPOperations:createObject(S,A): are pObjDN = cn = TESTUSER8, cn = u
  . BasicAttributes$IDEnumImpl@1217a79,
  09:31, ERROR 515 [OID] =.
  09:31, 515 ERROR [OID] ERROR in OID:com.thortech.xl.integration.OID.util.tcUtilLDAPOperations:createObject(S,A) NamingExceptionUnable to create the object
  09:31, ERROR 515 [OID] =.
  
  09:31, ERROR 531 [OID] =.
  09:31, 531 ERROR [OID] cn is TESTUSER8, cn = users, dc = orademo, dc = com: [LDAP: error 34 - DN syntax code]
  09:31, ERROR 546 [OID] =.
  
  09:31, ERROR 546 [OID] =.
  09:31, ERROR 562 [OID] ERROR in com.thortech.xl.integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) NamingExceptionError when connecting to the target
  09:31, ERROR 562 [OID] =.
  
  09:31, 578 ERROR [OID] =.
  09:31, 578 com.thortech.xl.integration.OID.util.tcUtilLDAPOperationsUnable ERROR [OID] to create objectNamingExceptioncn is TESTUSER8, cn = users, dc = orademo, dc = com: [LDA
  09:31, 578 ERROR [OID] =.
  
  09:31, ERROR 593 [OID] =.
  09:31, 593 com.thortech.xl.integration.OID.util.tcUtilLDAPOperationsUnable ERROR [OID] to create objectNamingExceptioncn is TESTUSER8, cn = users, dc = orademo, dc = com: [LDA
  09:31, 609 ERROR [OID] =.
  
  Can someone help me out of this.
  
  Thank you and best regards,
  
  Rajesh.

  ID Manager makes you're pre-load that exists is OID?

  And I think that first name and family name may not work for you, try with the dn of the user in the Manager of OID field.

• Help with code to insert, and then update the form table.

  I have a form where a user can add a new record in a table. Here is the procedure for recording button that works very well. But I call another procedure for updating the table with an "if" statement "The SQL code that I use works fine to get the data I'm looking for when I run it in SQL, but the 'if' statement updates all records in the table to ' n ' when some should be"Y". I am new to Oracle forms development (3 months) so it's probably very simple, but I'm stuck and need to get this finished form. Any help is greatly appreciated.
  
  
  SAVE BUTTON TRIGGER PROCEDURE:*.
  
  PROCEDURE SAVE_MM_1099_ADD IS
  
  MM1099_NO NUMBER (10);
  NUMBER OF THE YEAR (4);
  NUMBER OF NOTICE_SEQ_NO (10);
  NOTICE_NAME VARCHAR2 (30);
  TIN_FROM_DB VARCHAR2 (23);
  TSDI_DB VARCHAR2 (1);
  IRS_NTYPE VARCHAR2 (10);
  IRS_NDATE VARCHAR2 (10);
  BU_WH VARCHAR2 (1);
  NO_TIN_NAME VARCHAR2 (1);
  DUP_IRS_NOTICE VARCHAR2 (1);
  G1_IRS_NOTICE_3YR_2BS VARCHAR2 (1);
  
  B_SAVE_ADD boolean;
  
  Start
  
  IF MM1099_NO IS NOT NULL THEN
  
  insert into MM_1099
  (
  MM1099_NO,
  YEAR,
  NOTICE_SEQ_NO,
  NOTICE_NAME,
  TIN_FROM_DB,
  TSDI_DB,
  IRS_NTYPE,
  IRS_NDATE,
  BU_WH,
  NO_TIN_NAME,
  DUP_IRS_NOTICE,
  G1_IRS_NOTICE_3YR_2BS
  )
  values
  (
  MM1099_NO,
  YEAR,
  NOTICE_SEQ_NO,
  NOTICE_NAME,
  TIN_FROM_DB,
  TSDI_DB,
  IRS_NTYPE,
  IRS_NDATE,
  BU_WH,
  NO_TIN_NAME,
  DUP_IRS_NOTICE,
  G1_IRS_NOTICE_3YR_2BS
  );
  
  
  : system.message_level: = '5';
  Commit_FORM;
  : system.message_level: = '0';
  
  END IF;
  
  UPDATE_NUMOCCURTIN;
  
  END;
  
  PROCEDURE CALLED:*.
  
  PROCEDURE UPDATE_NUMOCCURTIN IS
  
  CURSOR c1 (NUMBER NUMOCCURTIN) IS
  SELECT THE YEAR, TIN_FROM_DB, COUNT (TIN_FROM_DB) AS NUMOCCURTIN
  OF MM_1099
  TIN_FROM_DB GROUP, YEAR
  SEEN (COUNT (TIN_FROM_DB) > 0);
  
  CR1 c1% ROWTYPE;
  number of v_recs;
  NUMBER OF NUMOCCURTIN;
  
  BEGIN
  v_recs: = 0;
  
  OPEN c1 (NUMOCCURTIN);
  
  loop
  
  Fetch c1 into cr1;
  When the % notfound c1 or c1% rowcount output > v_recs;
  
  IF cr1. NUMOCCURTIN > 1 THEN
  
  UPDATE MM_1099
  SET DUP_IRS_NOTICE = 'Y ';
  
  ON THE OTHER
  
  UPDATE MM_1099
  SET DUP_IRS_NOTICE = 'N';
  
  : system.message_level: = '5';
  commit;
  : system.message_level: = '0';
  
  END IF;
  
  v_recs: = v_recs + 1;
  
  END LOOP;
  
  CLOSE c1;
  
  END;
  
  For any help or suggestion will be greatly appreciated.

  IF cr1. NUMOCCURTIN > 1 THEN

  UPDATE MM_1099
  SET DUP_IRS_NOTICE = 'Y ';

  ON THE OTHER

  UPDATE MM_1099
  SET DUP_IRS_NOTICE = 'N';

  : system.message_level: = '5';
  commit;
  : system.message_level: = '0';

  END IF;

  There is no WHERE condition in your update, so always update you all THE RECORDS in your table. I guess it must be something like:

  UPDATE MM_1099 SET
    DUP_IRS_NOTICE = 'Y';
   WHERE TIN_FROM_DB=cr1.TIN_FROM_DB
     AND YEAR=cr1.YEAR
  

  Some general order questions about your code:
  Where your variables for your insert statement are filled? looking at your code they will always be NULL.
  Be careful when using the variable exactly as the names of column names. This may cause unexpected behavior (for example when it is used in the UPDATE statements).
  Why engage in the other branch, but not in the branch so?

• Update the form called the calling form update

  Hello
  
  We have a custom form (form 1) in which we ask another form (form2) when a key is pressed in Form1.
  
  Based on an id generated in Form1, the formula 2 is met. Update any record in Form1, it is necessary that the corresponding records of Form2 should also be updated. the question is how do update form2.
  
  Please let me know the trigger appropriate in form1 to achieve this.
  
  
  TIA,
  SR

  948611 wrote:
  Hey Hamid,

  Thanks for the reply. The trigger for UPDATE doesn't work somehow.
  Another option?

  Hi, SR
  What is your code to the UPDATE trigger after?
  don't forget fire after update during the Post process and post the Transactions, after that a row is updated. This event fires once for each row that is updated in the database during the validation process to Form1 in the DATABASE, no formula 2
  When you call the Form2 update block with Execute_query;

  Hope this helps

  Hamid

  Mark correct/good to help others to get the right answers. *

• HP just update the bios on my computer and now I have no sound.

  I have a HP Pavilion 1d67cl g6, the windows operating system 7. HP just updated bios and now I have NO SOUND. In system devices, it says everything is working normally. Nothing is cut, just NOT of HIS. Help

  Hello:

  Go back to the BIOS and the BIOS to its default values and restart.  See if get you your audio files.

  Try reinstalling the audio driver, if it does not work.

  Try a hard reset of the laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c01684768 & prodTypeId = 321957 & prodSeriesId = 3688868

  Last resort, back up your files and perform a recovery of the system back to the form of the plant.

  Paul

• need to update the first, but it stops and has to close CEPHtmlEngine... what?

  I need to update the first on the creative cloud but it stops and 62% and needs to close "CEPHtmlEngine" to continue. What is this and how do I close/change app?

  Jason2494 you want to use the Activity Monitor/Task Manager to close the adversarial process.  What operating system do you use?  You can also try restarting your computer and then try to apply the update again.

• problems of updating the form.

  I've been racking my brain trying to figure out how to get something to work with a form.

  It's the form that will be used...

  < action = "Insert.cfm cfform" name = "Create" target = "_blank" > "

  This should open the insert.cfm as I have a report to open the end of manual page. It works very well.

  < cfreport format = "pdf" template = "Detail_Printable.cfm" query = "Qdetail" > "
  < / cfreport >

  But I have a problem with the form. I need to update because I don't want the user to have the option to submit the form again, with the new data.

  Hope that makes sense.

  Thank you

  James

  OK, let's start first: it is not Java.  This is JavaScript.  They are two totally different things and independent (despite the similarity of name).

  http://en.Wikipedia.org/wiki/Java_%28programming_language%29

  http://en.Wikipedia.org/wiki/JavaScript

  Second, google "javascript onsubmit handler.  There are piles of information & tutorials & guidance out there already, so there's no point repeating here.

  Once you get your brain autour how managers onsubmit works, google 'onsubmit javascript open new window' and read some of the tips on how to do it.  All the info you need is already here.  Indeed, there is exactly the answer you need on the first page of results.

  If you get to the point to write code and need help with it, then after return.  But you should be able to solve everything with Google and roll the sleeves ;-)

  --

  Adam

• I updated the firmware of my as30v and now it does not work

  It's my problem.
  In my computer, the update was completed suceffully, but then my actioncam it does not work.
  I removed the battery and nothing to do.
  The screen is off and the rec light still works.
  No information on the screen, no response. I tried to remove the time of one and an another battery. The red light is still in mode on. If I connect with the computer, nothing happened.

  Died?, but why!

  Your device is in integrated security mode / download.

  Go through the process of updating the firmware again. What operating system do you use?

  Repeat and follow this guide:

  http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=HDRAS30V&upd_id=9893&os_group_id=23

• My phone calls come in the form of text messages and use the tone of the message text and not ringing.

  My phone calls on my iPhone 5 c pass as text messages and the sound message is used and not the ringing of a phone call.

  Calls can only come in the form of text messages. Go to settings > sounds and make sure you have the right tone selected.