Is a XP SP2 / SP3 [32 bit - family edition] CD {still} available?

Similar Questions

• What is the number of 11.1.0.6 patch (Microsoft Windows 32-bit)? It is still available in My Oracle Support?

  Hello

  I just need Oracle 11.1.0.6 (Microsoft Windows 32-bit), can we know what is the patch number for this and it is still available for download, or I have to ask oracle?

  Is also 11.1.0.6 needs basic setup program (11.1.0.1)?

  PL see the instructions at the bottom of this page - Oracle Database Software Downloads | Oracle Technology Network | Oracle

  11.1.0.6 is the basic version.

• Repeat the installation of XP SP2 SP3 chess & (0xc0000005 error message)

  original title: repeated failure of XP SP2 SP3 installation &

  Computer - 32-bit intel running Win XP SP1. Before the blue screen of death and sys fatal error: "logon windows process is complete w / status of 0xc0000005 (0x00000000 0x00000000)" computer ran SP2.  However once I got XP with the ERD installation, system not subsequently install SP2 (which has no x 3). Before the blue screen of death, I had a lot of crashes with IE and had tried to install SP3 several times (at least 4 x and it has always failed).  Last week, cleaned the registry with CCleaner and today cleaned registry with Windows Registry Editor (that I got from MS and installed the code in Notepad and ran). SP 2 fails to install. At first there was a message. So I uninstalled Norton, thinking that may be preventing them working right. (Since I had Norton until today I think not machine is infected.) After cleaning the registry, I got a new error: "Entry point procedure DecodePointer is not found in KERNEL32.dll dynamic link library" is there anything else I can do? Thank you.

  Since its impossible to say what your registry cleaning did I think that at this point I would do the following:

  (1) download and create the startup disk check utility of your HD manufacturers site, for example SeaTools for WD drives

  (2) create the memeory bootable checking the utility from www.memtest.org

  (3) assuming that the two utilities do not present any errors

  (4) pure install winxp, deleting all partitions, create a new one, and then continue with the installation

  (5) install the drivers, if you have a driver disk provided by the manufacturer of the PC, otherwise, create an internet connection, enable the windows firewall, do NOT install any programs or admit MSUpdate run

  (6) If a large PC manufacturer for example Dell / Hp or laptop then visit this site of decision-makers, specific to your model and update all drivers, if a generic PC card so if material individual responsible, for example the motherboard, sound, video, these last two are not on board the motherboard

  (7) then run MSUpdate, configure it to Important updates ONLY, and NO updates recommended - you may need to repeatedly run MSUpdate

  (8) then check the operation of your PC. Unless you have the latest version of Norton I forget and try http://www.microsoft.com/security_essentials/

  (9) only after all seems okay if you think about installing software

• D20 + SATA ONLY + WINXP SP3 32 BIT

  Hi all

  Testing a D20 for the company and can not get the D20 to run as a SATA drive only. Currently, its spinning the Marvell controller with a 500 GB drive in.

  Have tried to get into the BIOS and disable the RAID controller but then I can't use the HD as just a SATA drive.

  The only joy I had is to plug in a diskette with 32-bit controller Marvell drivers starting with Windows XP 32-bit, as he travels through install press F6 to install the drivers for the controller, and then once I hit continues to back installation/format disks, I get a blue screen of death. The strange thing is that if I use our WinXP SP3 32 bit copy of Microsoft license which it MUST be installed with I get the BSOD, but if I through in a Dell WinXP SP3 32 bit OS disk I can install the operating system without problem at all!

  All I want to do is really disable the single use of SATA drive only (somehow) RAID controller and install WinXP SP3 32-bit using our copy of Microsoft Licensing with this blue screening!

  Any help would be fantastic!

  See you soon,.

  Ant

  Hi all

  Do not worry, I managed to get by

  For all those who need to know also I will post an update of the instructions on how to do it a little bit after I managed to install the operating system

  Kind regards

  Ant

• I reinstalled XP. I have SP1 is not found, but did install SP2 & SP3. I just located SP1 and it wouldn't install because SP2 & SP3 has been installed.

  I reinstalled XP. I have SP1 is not found, but did install SP2 & SP3. I just located SP1 and it wouldn't install because 2 & 3 have been installed. Can I uninstall SP2 & Sp3 then download sp1 and install. What started this was my to tinstall net3.5 sp1 updates. He couldn't because there was no SP1 and I don't have any further updates until that this update is installed. Help

  Thank you

  Q: what about this one? -Online http://answers.microsoft.com/en-us/ie/forum/ie8-windows_xp/i-cannot-open-websites-using-internet-explorer-8/6f1e53c8-3522-4a78-8e4a-336863deb7fd
  A: the answers I received has not solved the problem. That's why I reinstaled XP

  1. but you started this thread on 06 September, almost a week after you 'reinstalled XP' and then installed SP2 & SP3. Please explain?

  KB2393802 was missing, I tried to download and said that it was not available.

  2. How have you tried to download & where was she available (for example, when you ran a further manual verification of updates today)?

  3. what 'net3.5 sp1' update you referring (e.g. KB951847)?

  4 WEBCAST: What is the full name of your Norton application (for example, Norton AntiVirus;) Norton Security Suite) and when (exact date preference) your current subscription expire?

  5 When you finished the clean install of Windows XP, etc., 01 September, how long was the computer connected to the internet until you have installed the Norton application?

  6 WEBCAST: Is Firefox, Chrome or any other alternative browser installed?

  7. have you backups of ANY changes Registry Mechanic has made to your computer since you've done the clean install of Windows XP on 01 September? [1]

  ==========================================================
  [1] injudicious use of registry cleaners can play a role here. TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• I have a licensed copy of Windows XP Professional SP3 (32 bit). Am I eligible for an upgrade the 64-bit version?

  Updated 32-bit to 64-bit

  I have a licensed copy of Windows XP Professional SP3 (32 bit). Am I eligible for an upgrade the 64-bit version?

  Think twice before using Windows XP 64-bit.  Very few pilots have been written for this platform and, frankly, it's not all that stable, what I read.

• I have Windows XP Home Edition SP3, 32-bit and IE8. Do I need to upgrade to Windows 7?

  I have Windows XP Home Edition SP3, 32-bit and IE8.  Do I need to upgrade to Windows 7?

  The upgrade to Windows 7 is a personal decision.  Chances are that if you can do what you need to do on Windows XP then it is 'useless' to upgrade.  If you plan the upgrade anyway, you should first check to see that your hardware is supported under Windows 7.  To do this, Microsoft has provided a program of "Windows 7 Upgrade Advisor" to run on your current computer.

  <>http://Windows.Microsoft.com/UpgradeAdvisor >

  HTH,
  JW

• I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500

  I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500.

  Hi Mark,

  Thank you for writing to Microsoft Communities. The description of your problem, I understand that you have problems setting up a homegroup with Windows 7 computer. Please correct me that I misunderstood.

  
  

  Mark, please don't worry I'll try my best to resolve the issue.

  I suggest to go through the following websites, which provide a detailed description on the homegroup and how to set up.

  Home Sweet homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Homegroup from start to finish

  http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

  If you're still having trouble to set up the residential group, please let us know. We will be happy to help you.

• VCENTER STANDALONE CONVERTER 5.5 ERROR ON SLES 11 SP3 64 BIT CONVERSION

  Hi all.

  I have no problem my servers from SLES 11 SP3 32-bit conversion. those 64-bit. any ideas? Joint here is the log. Thank you.

  Moreover, I also trouble converting my SLES 11 64-bit SP1 servers. "Unable to query live Linux source machine.

  Post edited by: THIRTEENTHSHADE

  Are your machines with a UEFI firmware? If so - bad luck because they don't are not supported (p.19 in the guide). The reason is not the firmware itself (Converter supports UEFI) but the bootloader. SLES using GRUB with BIOS machines but ELILO with computers UEFI and converter does not support ELILO.

  If this isn't the case, please attach the full bundle newspaper. GUI logs aren't useful.

  Kind regards

  Plamen

• upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  my PC configuration is like below:

  Card mother Intel DH61WW
  Processor Core I3 2100 3.1 Ghz
  4 GB OF DDR3 RAM
  Seagate 1 TB SATA HARD drive
  OS: Microsoft Windows XP Professional SP3

  I run Windows 7 upgrade advisor in which some results below the incompatibilities:

  Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
  Unknown Intel we have not the compatibility information about this device.
  Intel 82579V Gigabit Network Connection
  Unknown Intel we have not the compatibility information about this device.
  Realtek High Definition Audio
  Realtek unknown we have not the compatibility information about this device.

  Here's my conceerns:

  What needs to be done to overcome the problems of incompatibility?
  Do I need to download new software files compatible for windows 7 and then install
  for example VLC media player, Skype, MySQL Server I am running
  or currently existing files are compatible to install with Windows 7?

  Would I be able to upgrade to windows 7 without any problem and safely?

  Could you please help me with the questions above?

  Please correct me with additional suggetions that I may have missed with.

  Looking forward to hear from you

  Thank you

  You understand that you will not be able to upgrade Windows XP to Windows 7?  He will have to do a clean install.

  The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)

  John

• XD - bit (CPU function) disabled/not available for Satellite A100-PSAA9

  Last week, I bought the laptop Toshiba Satellite A100-847 (Satellite A100-SPAA9) which has an Intel Core 2 Duo, model T7200.

  Specifications Intel, this processor (as all Core and Core 2 processors) has the particularity of XD - bit, known in Windows like DEP. I had the unpleasant surprise to discover that this feature is
  reported by Windows as unavailable (in hardware). I got the electronic manual on the recovery CD (which is an edition that is older than the printed manual that comes in the package) that I can do this feature
  available (for some older models of Satellite) but I couldn't find any option in my BIOS to do this (my BIOS is made by Phoenix, version 2.0).

  I really want to know how to make this feature available/active as my processor socket and so is the operating system purchased with the laptop and more than that, this feature is something beneficial - specially designed for security reasons and supported by all modern processors and operating systems.
  What do I have to wait for an updated BIOS include this option (to activate the feature XD bit) or that it is automatically set as active/available (instead of disabled/not available)?

  I expect a well documented answer from someone who knows what I'm talking about.

  Thank you very much.

  Hello

  I know what you're talking about.
  Execute Disable Bit (xD-bit) Intel can help prevent certain malicious types of buffer overflow attacks when combined with a compatible operating system.
  Disabling malware code procedure is called the extension-> short adj. data protection

  Data Execution Prevention (DEP) helps prevent damage from viruses and other security threats that attack by running (executing) malicious code of the locations of memory that Windows and other programs should use. This type of threat causes damage by taking over one or more locations of memory used by a program. Then she spreads and harms other programs, files, and even your email contacts.

  Unlike an antivirus program or firewall, DEP does not prevent harmful programs from being installed on your computer. Instead, it monitors your programs to determine if they use the system safely memory. To do this, DEP software works alone or with compatible microprocessors to mark some memory locations as "non-executable".

  If a program tries to run malicious code or not a protected location, DEP closed the program and notifies you.
  DEP can take advantage of software and hardware support. To use DEP, your computer must be running Microsoft Windows XP Service Pack 2 (SP2) or later version, or Windows Server 2003 Service Pack 1 or later version. Software only DEP helps protect against certain types of malware attacks, but to take full advantage of the protection DEP can offer, your processor must support "execution protection".

  The Windows 32 bit (SP2) version supports bit off Execute (xD) so the computer function notebook processor is running in mode of extension (PEA) physical address.
  It is a technology based on hardware designed to mark the locations of memory as non-executable.
  If your processor doesn't support hardware DEP, you need to upgrade a processor that offers execution protection features.

  However, you can see the control panel-> system-> Advanced tab-> Performance settings-> Data Execution Prevention tab.

  By default, DEP is enabled only for essential Windows operating system programs and services. In order to protect more programs with DEP, select turn on DEP for all programs and services except those I select.

• I instaled Windows 7 64-bit Enterprise edition and installed the latest version of Firefox and it freezes every time that I run. Please help me.

  I instaled Windows 7 64-bit Enterprise edition and installed the latest version of Firefox and it freezes every time that I run. Please help me.

  4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM

  54e24e0e-dfc4-466b-A347-4bd95536773e03-Jan-1312:30 AM

  22d351d2-6461-4F33-9FBD-6d31f769e73103-Jan-1312:30 AM

  8a8da99b-335e-43bb-AA12-4634aa0b431003-Jan-1312:30 AM

  A15bb095-aeb9-44E1-A79C-1a17cee207d503-Jan-1312:28 AM

  A few videos that use the Flash plugin contain a menu entry in the context menu that allows to disable hardware acceleration in flash player.

  To disable the mode you will need to edit the file C:\Windows\SysWOW64\Macromed\Flash\mms.cfg as explained in the knowledge base article protected.

  • http://KB.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3

  See also: how to solve the safe_mode of Flash Player for Firefox? :

  • http://forums.Adobe.com/message/4468493

• Xoom Family Edition: Ice Cream Sandwich upgrade?

  The XOOM Family Edition will get the update of the ICS?

  If so, we can it wait until the end of the year?

  @koosh808

  You can see this post.

  Mark

  Support Forums Manager

• Is there a manual for the family edition xoom?

  Hi all

  can you help by downloading a pdf version or send me a link?

  Thanks in advance

  Mohsen

  Here you go

  http://www.Motorola.com/staticfiles/support/us-en/tablets/Xoom-family-Edition/documents/staticfiles/...

• Where can I download a. ISO image of Windows Vista 32-bit (full edition)?

  Hi all

  I have a real installation of Windows Vista 32 bit Ultimate edition.

  I would like to install my copy of Windows in a virtual machine, but this usually requires a new PRODUCT KEY get updates etc.

  In an attempt to solve a problem in the host machine, I want to do it on a temporary basis with a "clean to a virtual machine installation.

  I know how to recover my product key, even though I have lost my disk of Vista that I bought.

  Download an .iso image of Vista 32 bit Ultimate from Digital River or at all Please?

  Failing the above all I can do is try to hunt for my original disk and reinstall and lose all my programs installed.
  The other option is to back UP everything on a temporary basis, try what I try
  and then recover all if my experience isn't a success.

  Original title: Microsoft Virtual PC question regarding the installation of Vista.

  Hello

  There is no available from Microsoft Vista ISO file download.

  You can borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.