Update Windows 10 progresses don't step forward

Similar Questions

• One last question... The upgrade of Windows 7 will be a step forward or backward?

  An upgrade to Windows 7 Home Premium really ultimately will make a very positive difference & great overall performance and use daily versus continuing to run Vista Home Premium on HP's newer models equipped with AMD Turion or Athlon processors such as the laptop DV2000 or m8200n Office?

  Personally, I like Windows 7 to Windows Vista, based on performance. The systems I use with Windows 7 to work faster now compared to performance with Vista.

  He could not make a huge difference or big, but you will feel a positive difference.

• Restart your computer to finish installing important updates keep appearing. Windows Update (Windows 7)

  Previously I installed updates for windows 7, after installing the updates, I restart my computer but it still seems the message to restart your computer to finish installing important updates. Help solve this problem...

  Original title: Windows Update (Windows 7)

  Hello

  Step 1: Determine if the update has been installed

  Review the installation history

  a. to review the installation history, follow these steps:

  b. Click Start, point to all programs and then click Windows Update or Microsoft Update.

  c. on the Web site, click on view update history.

  d. find the latest entry for the specific update.

  (e) Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed.

  Step 2: Run the Windows update utility for troubleshooting.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Update Windows, stuck at step 3 of 3, does not start

  Hello

  Reading the forums, so it seems I'm not the only one who had this problem, but none of the data seems to work for me.

  My computer is running slow this morning (as sometimes when he treats a large update), so I restarted.  But now, whenever the system tries to start, it gets insofar as the message 'configuration updated step 3 of 3, 0% ' before it restarts in total.

  I am running Windows Vista Home Premium - I think that it is 32-bit, but I'm not positive.  I have a laptop HP Pavilion DV6345us.

  I tried all suggested fixes, I found.  I tried to launch the Mode without failure (all versions of it), but every time it's the same thing.  I've never had to simplified office, I think I'm supposed to see.  I tried the system restore, but none of the dozen or so restoration work points.  After each attempt to restore the system, I get this error message: data error (Cyclic Redundancy Check) (0 x 80070017).

  My last update was added on 06/05/10 at 09:16:38.  My last update before that was 05/03/10 at 14:31:18.  My time zone is set to GMT - 8:00 (or Pacific time).  Between the Windows updates, I downloaded an update for Java (Java 6 update 20) 04/05/10.

  I have also run the memory diagnostic tool, but that has not changed anything.

  I do not have any third-party malware or anti-virus software.

  This is all the relevant information, I think I can give.  Any comments would be greatly appreciated, because I use my computer for work and need again as soon as POSSIBLE.

  Thank you!

  I do not have any third-party malware or anti-virus software.

  Not good.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  How TO do a clean install of Vista: See the section "If you want to reinstall Windows Vista by running a new installation... "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need assistance, start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After updating Windows computer stops at the configuration in step 3 of 3, 93% - HELP

  After installation of Windows from one day to the next update, my computer will configure the update.  It stops at the step 3 of 3, 93%, stops, goes to the top.  The same appears configuration step 3 of 3 screen, 93% and stops.  What can I do?  Thank you

  Hello Imaco,
  Thank you for visiting the Microsoft Answers forum.
  When the computer boots press F8 until you see the Startup Options and select last known good configuration.

  Thanks, Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I cancelled an update and now I don't have windows Messenger How do I restore it?

  My store asked me to update my applications and I canceled some updates, because he was taking too much time. But I don't know that I left my messenger and other applications of the Update window. So, how can I get my messenger back app? Also if I restore my pc it will erase everything? I don't really want to go back to the geek team.

  Hello

  Windows Messenger is now complete.

  Skype has migrated accounts Messenger Microsoft.

  https://support.Skype.com/en/FAQ/FA12204/how-do-i-move-from-Windows-Messenger-to-Skype

  See you soon.

• When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  * Original Title: windows update

  When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  If anyone has any ideas on how it can be fixed please tell me

  Adam

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide the exact details of any problem it reports as not fixed.

• My PC has been recently updated Windows 10.  Adobe has informed me that my PSE 9.03 updates are ready.  Tried three times to download but each time download was not successful-"try again later".  So what don't understand me?

  My PC has been recently updated Windows 10.  Adobe has informed me that my PSE 9.03 updates are ready.  Tried three times to download but each time download was not successful-"try again later".  So what don't understand me?

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• Windows 7 will not be updated without requiring a download/install of Windows 10, I don't want to.

  Whenever I try to update my Windows 7, Windows Update module only provides a button that will download/install Windows 10.  Why?

  You must remove Windows 10 of the queue by hiding the upgrade or remove the upgrade.

  Once hidden, you should be able to update Windows normally - but he might come back to haunt you again.

  Easy way:

  http://blog.ultimateoutsider.com/2015/08/using-GWX-stopper-to-permanently-remove.html 
  It is a free tool that can remove and disable notification area icon "get Windows 10' on Windows 7 and Windows 8. The latest versions can also disable the behavior "upgrade to Windows 10' in the Windows Update control panel.

• How will I know if I need to update windows drivers? I continue to receive messages to update the drivers. Don't know if it's microsoft or something.

  I get messages that I need to update the drivers.  Don't know if it's the Microsoft or someone else.  How will I know if I need to update the drivers?

  Thank you

  MS victory do not harass allows you to install the drivers, any notification comes from a third-party utility.

  Have you installed third-party type maintenance programs?

  I would suggest to scan the PC for malware with this utility free http://www.malwarebytes.org/antimalware/

  If you need to update all system drivers depends on if you encounter any problems, in general, if you're not, it is useless

  Pilots are obtained from your PC manufacturers support site, if a brand PC

• When I first installed the new 5.1 icloud, OUTLOOK 2016 worked well. Updated windows 10 and know icloud will not work. ICloud show that it works.

  When I first installed the new 5.1 icloud, OUTLOOK 2016 worked well. Updated windows 10 and know icloud will not work. ICloud show that it works. Have reinstalled icloud a lot of time and know that the add-in does not show up in OUTLOOK.  Help

  I was pulling my hair re the incompatibility of iCloud and Outlook of Office 365 2016.  I finally got things to work on three of my computers - which are on the latest version of Windows 10.

  The steps that worked for me:

  (1) uninstall the plugin iCloud (what version you have); the uninstall may fail but if so don't worry as step 3 below overlays some iCloud plugin version you have installed

  (2) open the Control Panel, uninstall, change/repair Office 365; Select fast repair

  (3) reinstall iCloud plugin (version 5.1), then restart the system by following the instructions

  (4) after the reboot, plug in iCloud application Apple ID and password; Make sure that you enter your apple with the suffix icloud.com ID (e.g., [email protected])

  (5) check the iCloud options to your will (e.g., photo synch, synchronization of bookmarks, sync mail/calendar, etc.)

  (6) check apply it, leave the work plugin iCloud for a minute, when he finishes, check the closing

  (7) open Outlook 2016 and check your calendar or contacts or anything that you indicated in step 5, that you want to synchronize with iCloud.com

  I hope it works for you!

• Welitebook HP 8540p: Wireless disconnects frequently after updating windows 10 Hp Notebook welitebook 8540p

  I'm updating to win10 about a month ago. Since 3 days wifi disconnect every minute...

  is it because of a windows update?

  concerning

  linustocn

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on WiFi often disconnect and wanted to help.
  
  Whenever someone comes here running Win10 and complains about something just suddenly does not work, I immediately suspect driver updates Windows.
  
  Unfortunately, Win10 forces automatically updates driver on each of us, without our knowledge and without our permission - and in this case, a work PC is suddenly 'broken '.  This could happen to you.
  
  You must go to settings, update & security--> Windows Update.
  
  Then choose Advanced Options--> history to see when the updates have been applied last.  If you see one that include device drivers, who might be the problem. So, if you can, you should see if you can restore the drivers that are causing the problem.  Do so you by going into Device Manager, see if the device is still listed and so, trying to restore the last driver update.
  
  And if this resolves the problem, then disable future driver updates by using the information in the link: http://www.tenforums.com/tutorials/48277-driver-updates-windows-update-enable-disable-windows-10-a.html

  If you don't see the driver updates recently, then try the steps in this thread: HP PC - wireless network and Internet troubleshooting
  
  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• No sound from speakers after update (Windows/BIOS)? What can I do to fix this?

  If you do not have from speakers after an update (Windows or Bios), please try a Hard reset first. Also, keep reset material mind does the same thing with each cell.

   

  Now, if the hard reset does not work, you will need to update the Audio drivers (Realtek High definition (HD) Audio Driver) on the HP site.

  Once you arrive at this page of your product type # in (if you don't know what your product is # or when it is on the laptop, here is a video that will show you exactly where to find ) > search click > select the option 'Software & Driver Downloads' > choose your operating system (not sure what operating system you have or where?) ( This should help out you) > then click after selecting operating system > scroll down and click on the + (plus) next to "Audio driver" > and then select the most recent version by checking the date on each download > then run.  Now test the sound after installation.

  Also, please try to use Recovery Manager to reinstall the IDT HD Audio Driver If the steps above do not work. How to use the Recovery Manager to reinstall the drivers and software is detailed in the document below.

  http://support.HP.com/us-en/document/c01868333

  The last step to do if you get always no sound at all is a system restore to when you know the sound worked and do not download the last updated after that.

  Here is the document to show you how to proceed. Select the option at the top that says "restore windows to an earlier point.

  Just make sure and save the files and upload, you have recently installed or saved on your laptop.

  THX

  Hope this information is helpful to you.

  THX guys

  

• Update Windows on Windows 7 remains at 0%. Updates will not be installed.

  Windows 7 update does not install updates.  It is said there are 35 updates installed.  The Update window remains at 0% for hours.  I tried to FixIt - no result.  I checked, that is to say, that everything is as it should be.  This computer is a system that adjusts only once a month.  Should I do a clean boot?  I really don't want to reinstall Windows 7.  Any help would be appreciated.

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services run properly

  Windows update General troubleshooting

  Suggestions:

  Make sure that the following services are started.

  1. Click Start, type services.msc, press on enter, and then click Services.

  Double-click on these "Windows Update Service", "Cryptographic Service" and Background Intelligent Transfer Service"and under the general tab, verify that the service has not been disabled in the Startup Type box. If the Service has been disabled, then set to automatic.

  1. Perform a clean boot to start Windows using a minimal set of drivers and startup programs. A clean boot helps eliminate software conflicts. Then try to install the update from the download file that the problem may occur because of a conflict of third party software.

  The following link has steps showing how to perform the clean boot:
  http://support.Microsoft.com/kb/929135

  The purpose of a clean boot is trying to find out what service/program is causing a problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  Important - step 7: reset the computer to start as usual

  1. Download the update and install the update manually
     http://www.Microsoft.com/downloads/en/default.aspx

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Error Code 800706BE and the 800706BE error Code could not update windows. CSP as also stopped working.

  I can't update windows. I get to 800706BA and error Code 800706BE codes. I also get frequent error messages that Cryptographic Services like stopped working. I would really like to fix this way! Thank you.

  OPTION A:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  OPTION B:

  You see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired at thetime the first machine was infected and/or your subscription has expired since or the machine is not been kept fully patched in Windows Update constantly, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now run a thorough check for hijackware, including registration required before a proper Court, logs don't here. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft