Update Windows 8.1 not in the shop

Similar Questions

• OFFICE 2003 UPDATES NOT INSTALLi WILL have carried out a search for the KB numbers is not found has tried to find where the updates have been downloaded, not at the office and not in the section windows software, then

  4 updates for office 2003 will not install update for the junk e-mail in Microsoft Office Outlook 2003 (KB974771) filter
  Update of security for Microsoft Office 2003 (KB972580)
  Update of security for Microsoft Office 2003 (KB974554)
  Update of security for Microsoft Office Outlook 2003 (KB973705) I searched the KB numbers, not found tried to find where the updates have been downloaded, not at the office and not in the software section windows, so I am at a loss, the small yellow shield keeps saying updates are ready for download
  I am at a loss of what everything else is fine, that I have set for automatic notification of updates, then let me chose to download.
  for any help or suggestion would be greatly appreciated.
  Thank you very much * address email is removed from the privacy *.

  Download the 4 four updates and install them manually.

  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB974771&displaylang=en&stype=s_basic

  Just look for the other 3 three, download to a place you can find and install manually the same.

  Taursie TaurArian [MVP] 2005-2010 - Update Services

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Internet security Windows 7 will not allow the installation of Flash Player 17 update

  Internet security Windows 7 does not allow the installation of the update of Flash Player 17.  I tried the direct installation using the IE_AX update without success.

  The procedures described in the last link enabled the update of Flash Player be downloaded and installed.

  It is regrettable that Windows IE seen Adobe as being an unreliable Site and requires a temporary user disable the security settings for the update to proceed.

  Thank you for your help.

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install?

  Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install? True, it is that it is already installed on your computer. If hide us, an another previous KB2570791 arises in our updates of Windows and asked to install anything, that it was installed... of the questions repeated and very annoying.  Help, please!

  (Microsoft Answers just sent us message have deleted our previous thread, ask for help!) We are simply not that these problems are problems with Windows XP updates related to DST or not?)

  Nadia. PA supporter said that your computer is hacked. He may be right. I can't weigh because I don't know what led him to this conclusion. If your computer is hijacked, then you should address that more that you need to fix this minor update. However, under the resolution of your problem to update, you can try this:

  Assume Windows XP

  Check the C:\Windows\System32\ directory for the presence of the file tzchange.exe

  If the file is not present or if the version of the file is not 5.1.2600.6171 or newer...

  Download the update appropriate 2633952 for your platform here:

  http://support.Microsoft.com/kb/2633952

  Run with - extract switch (e.g., Start > run > "[path to the downloaded file] \WindowsXP-KB2633952-x86-ENU.exe"-x)

  Of course, replace [path to the downloaded file] with the path to the downloaded file.

  Citations may or may not be required depending on the path. Place the x - out the citations if you use them.

  Choose a location for the extracted files (a new folder is recommended)

  Locate the extracted files. File tzchange.exe you want and copy it into C:\windows\System32

  That rerun Windows Update detection to see if the problem is resolved.

• My automatic updates Windows Vista do not work? Error: Windows can't check for updates

  original title: My automatic Windows Vista updates do not work?

  My automatic updates Windows Vista do not work? There is no error code, it just says "Windows can't check for updates.

  I tried to use the fix from microsoft, it would join in the other responses, but it did not work.

  And have you tried resolution: method 2 in http://support.microsoft.com/kb/946414?

• A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

  A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  Hope the information is useful.

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error database that can be updated windows detected 0x8007000D - not been fixed in Windows 8.

  Original title: slow startup and commissioning, also blocks windows 8

  My computer began to take 10 minutes to start and run. then hangs every now and again when I use it.

  I had problems installing an update and I thought that was the problem, so I followed the instructions and installed the update (KB2855336) on a clean restart. When I put the settings back to normal reboot I see the update succeeded, but the computer is still a good 10 minutes to restart.

  I tried to do a repair, but this is notauto-start.

  I tried to run a sfc/scannow and that froze the verification step 100%, I have waited a long time, checked in the Task Manager and saw that he was inactive and if you click end task.

  My Task Manager shows 99% or 100% use of the disk.

  I tried to do a system restore to a point in mid-July and which failed, error 0x80071a90 code.

  I followed the advice of someone to uninstall the update and restart twice, but the problem persists.

  What can I do to fix this? I use my laptop to work and so I need this problem as soon as possible.

  I just tried in safe mode and also it took forever to start and run. I tried different jumpers in safemode, maintenance of the system not found no problem, windows update however found two:

  Error in database that can be updated windows detected 0x8007000D - not fixed

  Windows Update, the components must be repaired to no fixed

  Help, please!

  Thank you

  Hello

  This problem is usually caused by Windows Update corrupted downloads or installations. However, virus infections are also known to cause this problem. Before scanning for viruses, please try these troubleshooting steps and check whether the problem is resolved:

  Method 1: reset the Windows Update components and check if the error persists:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Method 2: use Deployment Image Servicing and Management to fix Windows Update errors.

  To do this, follow these steps:

  a. press the Windows key + C and type cmd in the Search box.

  b. right-click on command prompt and select run as administrator.

  c. type these commands and press enter after each:

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  d. close the command prompt, and then run Windows Update again.

  Please get back to us with the State of the question.

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• Cannot update Windows Vista kb971468 due to the error message 800B0100__

  Cannot update Windows Vista kb971468 due to the error 800b0100 of message

  Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001":
  http://support.Microsoft.com/kb/958045

  Vista SP1 or SP2 installed?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Installation installation of Win Vista Home premium error Windows errors can not reset the deployment engine. to install windows, restart the installation.

  Original title: Error Installing Win Vista Home premium.

  I have a PC with Windows Vista Home Premium.  Suddenly, it wouldn't start.  I changed the boot CD ROM and put my Vista disc in and tried to do a "repair" that it came with missing engine or something like this.  After several attempts, I gave up and formatted hard drive losing all my data and programs (rather difficult to backup files when the computer does not start).  So, I tried a complete installation.  I put in the license code and he started the installation.  After a few minutes, the message came;  "Windows Setup could not reset the deployment engine.  to install windows, restart the installation.  I tried several times including completely turn off the computer for several minutes and try again.  I tried several times.  I thought oh well, I will install my Windows 7 program (this and never used).  Error on this installation was: your CPU is only good for 32 bit and Win 7 I have is a 64-bit version.  I'D RATHER INSTALL VISTA BUT need help on the error regarding the deployment engine.  Thank you, Lloyd

  Hello

  See if this solution works for you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Setup-could-not-reinitialize-the/f9e6f3e6-EA80-487F-8d86-36c793f7c152

  See you soon.