Update Windows problem and no sound.

Similar Questions

• When I first installed the new 5.1 icloud, OUTLOOK 2016 worked well. Updated windows 10 and know icloud will not work. ICloud show that it works.

  When I first installed the new 5.1 icloud, OUTLOOK 2016 worked well. Updated windows 10 and know icloud will not work. ICloud show that it works. Have reinstalled icloud a lot of time and know that the add-in does not show up in OUTLOOK.  Help

  I was pulling my hair re the incompatibility of iCloud and Outlook of Office 365 2016.  I finally got things to work on three of my computers - which are on the latest version of Windows 10.

  The steps that worked for me:

  (1) uninstall the plugin iCloud (what version you have); the uninstall may fail but if so don't worry as step 3 below overlays some iCloud plugin version you have installed

  (2) open the Control Panel, uninstall, change/repair Office 365; Select fast repair

  (3) reinstall iCloud plugin (version 5.1), then restart the system by following the instructions

  (4) after the reboot, plug in iCloud application Apple ID and password; Make sure that you enter your apple with the suffix icloud.com ID (e.g., [email protected])

  (5) check the iCloud options to your will (e.g., photo synch, synchronization of bookmarks, sync mail/calendar, etc.)

  (6) check apply it, leave the work plugin iCloud for a minute, when he finishes, check the closing

  (7) open Outlook 2016 and check your calendar or contacts or anything that you indicated in step 5, that you want to synchronize with iCloud.com

  I hope it works for you!

• Update iTunes 10 Windows problem and Solution

  I have a solution that worked for me, when Apple's CEO did not all trying to update iTunes 10 Windows.  I do not claim that their solution was bad, just that it has not resolved the problem for me, but lead me to the solution that did.

  The problem I had was that during the update, I would like to get the package of Windows error message that wouldn't let him proceed in process.  "There is a problem with this Windows Installer package.  A program required for this install to complete could not be run.  Contact your supplier of staff or the package of support ".

  THE SOLUTION: click on the Windows icon and go to settings > system > applications and features.  Click on Apple software update > change > change > repair

  Once the repair has been completed, I was able to install iTunes without any problems.

  How I found this solution: I tried the recommendation to Apple for this message exact error uninstall and reinstall iTunes, who had the same error message.  The next step was to uninstall QuickTime and iTunes, then the Apple Software Update.  At this point, the Apple software update wouldn't uninstall and generated the same error of Windows package as described above.  I fixed Apple Software Update and rather than proceed with the rest of the facilities, I advanced and installed iTunes.  He worked like a champ and he saved me a bunch of times.

  Thanks Airshipguy. It really worked.

  I have not tried all the recommendations of Apple support, being out of pocket for the time and also the uncertainty of losing the settings. Before you read this post, I tried to repair only iTunes. After reading the post above, I fixed all facilities Apple in a sequence such that the last of them was that of "Apple Software Update". I made this sequence intuitively and have no scientific reason.

  For those who need to be more aware of 10 Windows, right click the windows button, select "Programs and features" and then search for Apple. As indicated in the post above, it's the "Apple Software Update" that did the trick.

  My response was to reassure people that it works. Often, a single post does not give that confidence to give it a go!

• Update Windows errors and other problems.

  I just installed windows 7 on my computer. The problem is I can't seem to get the updates, I tried all sources (some worked, but did not resolve the full question). Patches some of the sources I'm like, Diagnostics Windows, Microsoft fixit and other software troubleshooting. Here are the two questions I have; 1. I try to check the windows update runs for several hours and then returns to "check updates for your computer. 2 updates show is ready to install on the stop button on the start menu, but not shown in WU. If someone can solve this problem, and I know that research on a certain need of people of this response, thank you.

  Your best solution is going to be a huge part of patience.  WU was extremely slow during the last 6 months.  I got a new facility just a day that lasted 7 hours ago to run.

  If your closing button indicates the exclamation point.  Do a restart and let him finish settle.  Return to Windows Update, then start it.  If you use a laptop, turn off the sleep function.  Go to bed and check in the morning.

• The updated Windows 7 and Firefox 32.0.1, Shockwave, Flash 15.0.0152 are totally screwed up.

  Nothing works. Can't even turn on the Task Manager. All the foregoing is the latest version. I would be interested if anyone has the same problem, which surfaced after Windows update. In my opinion, Shockwave Flash is the worst software in the history of computing. Hardware acceleration for Flash and Firefox are out of service, otherwise Firefox crashes. I now work in safe mode, and the first thing I have to do is turn off Flash, then check my drive with chkdsk. It is probably a Windows problem; they always boast about how to code problems in windows amounts to only 3% of the total. Right. Another point is that Firefox has its own problems. Why can't you run it with hardware acceleration on? Why must you do a work around with slows everything down to an analysis? It took so ridiculous I think strongly convert completely to Linux Debian. I only half configured; I just need to my favorites on the port to Iceweasel, get my outloook files and install a player. Normal operation for me, with limited plugins, is very slow.

  You are using an older version of Firefox. Can update you and
  see if the problem persists?

  Mozilla Help files;
  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

• Satellite Pro A60 with departure problems and weird sounds

  Hi all
  Three days ago, as I was using my laptop as usual. Then I restarted and then... just a black screen with an error message does not find a file any (I don't remember exactly) and making some weird sounds (such as the ' clicks')... sounds came the HARD drive I think because it's the right hand...
  I turned off it again and then some other error message (the black screen, white letters) asking for a file system... and weird sounds continued.
  tried twice... same thing... then after 20 minutes after being off of I it works... no error messages... but a long wait to get through the initialization of windows...
  now no more problem reboot... not more weird sounds, but with some performance issues... it has 1.2 GB of RAM and seems like he 'lost' speed... I can't use my iTUNES to listen to music cos is not working properly... I am now using winamp...

  Comments please... I got appreaciate it...

  Hi Luis

  On this path, it is not easy to tell what's happening. On this forum you will find several comments on missing files in the startup.

  You can try as a first step to restore the operating system on time earlier (before this problem started) by using the System Restore tool.

• I hv with updated installation problem and receive error message-_ "WindowsUpdate_00000646" "WindowsUpdate_dt000" __last 3 days, I get the same error __need help... _

  Error message

  "WindowsUpdate_00000646" "WindowsUpdate_dt000"

  Help me

  Once again thank you

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Vista Home Prem - problems since installation on 26 August updated - USB problems and everything deleted before the update restore points

  I have a Dell XPS 430 quad-processor. Receipt of the August 26 as update automatic updates. Since the computer was restarted after autoupdates, I have problems. Biggest problem is when I switch to another port my 4 ports KVM Trendnet TK - 407K and back on my Dell computer - the computer is blocked and the video is all garbled. My only recourse is to start the computer cold. After the first time it happened, I knew immediately updates, so I went in my restore points to restore back before the update. When I did restore bluescreened, but I was unable to capture data as computer restarted itself and get into the routine of starting fix. Difficulty of startup said it could not solve my problem.

  When I returned to restore to try to restore once again, I found that all my restore points have been removed. I found a utility called the shadow on the web Explorer and installed. He seems to find all my data restore point on the recovery D: drive, but Windows is not seeing them.  I should also mention, usb-wise, given that these updates have been applied, my Canon digital camera is not recognized when I hang it in one of the USB ports.

  Don't know what to do at this point. If I stay on the port on my computer using the KVM switch, my PC at home works well. Unfortunately, it is not realistic that I need to do my job in two laptops that are also connected to the switch.

  I'm tempted to just delete all the updates that have been installed on 8/26 to see if that helps - esp KB973879 I read on this patch causing a lot of problems with other computers.  Another thing that I have not tried is to use the restore from a command prompt application.

  Any suggestions would be greatly appreciated!

  Thank you!

  Hi brab61,

  Welcome to Microsoft Vista answers Forum!
   
  It is good to know that you're not faced problems with your computer.
   
  However, I suggest you go ahead and turn on Windows automatic updates to fix security vulnerabilities and it is beneficial for you to have these updates installed.
   
  Learn more about Windows Update, you can use the following link: -.
  http://www.Microsoft.com/Windows/downloads/windowsupdate/default.mspx
   
   
  You can run the System File Checker tool before you activate the automatic updates.
   
  To run the System File Checker tool, follow these steps:
  1. Click Start and type cmd in the box start the search.
  2 right click "cmd" in the list programs, and then click Run as administrator.
  3. you are asked to enter an administrator password or a confirmation, type your password or click on continue
  4. at the command prompt, type "sfc/scannow", and press ENTER.
   
  Note:- After that, you can now install an update both manually and check the update is causing the problem and let us know to help you and solve the problem.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Hope this information is useful.
   
  Let me know if it worked.
  All the best!
   
  Thank you, and in what concerns:
  Divya R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• walking for windows 7 and no sound

  Someone please help I am pulling my hair out there.  I have an old HP pavillion a1410n desktop and I just upgraded Windows vista to windows 7 and I have no sound.  I already downloaded the driver software from the HP site updated and still no sound.  Help, please!

  Hello:

  You should be able to use the audio driver for W7 directly from Realtek.

  Accept the agreement.

  Download and install the driver either the 1st or the 2nd on the list (32 or 64 bit depending on the case).

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Paul

• Impossible to update Windows 8 and can not download from the Store

  Hello

  I have Dell Inspiron 14z with Windows 8.
  I can't update Windows. When I press on install updates, it starts, but there are always 0% and 0 kB.
  Download of the store has the same problem.
  Thank you very much for the help.

  Hello

  Please try the Troubleshooting Windows App tool for question related apps:
  http://www.kapilarya.com/download-Microsoft-accounts-Windows-apps-troubleshooters-to-fix-casual-issues-for-Windows-8
  And try to reset the Windows Update components for attachment of update of related issues:
  http://www.kapilarya.com/fix-error-80070570-Windows-Update-encountered-an-unknown-error-some-updates-were-not-installed
  Hope this helps, good luck :)

• Update Windows 10 and Acrobat 9 Pro

  I have recently upgraded to Windows 10 and my Acrobat 9 Pro and I now do not have access to the function of 'sign' to electronically sign documents. The conversion of the Word option (updated 10 also) doesn't seem to work properly.

  Any ideas?

  Hi rstrimel,

  
  

  Acrobat 9 Pro has not been tested on Windows 8 and you might face compatibility problems.

• Update Windows 10 and OEM Office Starter

  I couldn't find anything about it except for Windows Media Center, that no longer work and when I downloaded the app it says there is no problem with my computer, but for another laptop, when I contacted the manufacturer, they said that Office Starter 2010 would no longer work after upgrading from Windows 7 to Windows on a 64-bit 10 decided to keep Windows 7 only I have no desire to have to download the full version! I know there are freeware word processors and spreadsheets, but much like the Office Starter programs.

  My HP is a 32-bit and I have the same question. Let Office Starter 2010 after the upgrade? It came pre-installed HP.

  Thanks in advance

  Hello

  'Office Starter 2010' is a Microsoft product, I don't think that HP can control this. Microsoft has withdrawaled 'Office Starter 2010' of Windows 8 and I do not think that they would continue with Windows 10. Please check:

  http://www.ZDNet.com/article/Microsoft-begins-phasing-out-Starter-Edition-of-its-Office-suite/

  Kind regards.

• WRT 310N worm. 2. cannot update Windows Vista and Norton 360 since I installed this router

  Hello world

  As the topic title says, since the installation of the router WRT 310N worm. 2 on my laptop, Windows Vista, and Norton 360 can not be changed - I continue to receive operation failed errors whenever I try to download the latest version of the software updates or antivirus. Generated error doesn't also have a HelpFile associated with it.

  I went to the admin settings, but since I'm pretty new to routers and wireless technology in general, I'm a little busy with what we have to try so I thought I'd come here and ask the experts.

  Would be very happy for any help!

  Thank you very much
  John

  Thank you, great_white. I will try that first thing when I get home!

  I'll keep you and all readers display updated on what I find.

  Kind regards

  John

• I've updated Windows 8 and Windows Live Mail now clashes with Microsoft Store

  Hello

  I use Windows Live Mail. I just updated Windows 8.1 (regular updates) and rebooted my PC. Now when I click on the links in my emails, rather than open this link in my Web browser, it shows "no apps are installed for this type of link (res)" and gives me the ability to search the store.

  Thanks in advance for your help,

  Stephen

  I don't know what a "res" link would be, because the e-mail links should be the "mailto:" Protocol.

  But you can try this:

  Go to the desktop Panel by right clicking your Start button.  Under the section "Programs", find "choose your default programs" and the value of Windows Live Mail to have all possible defects it can handle.

• Updates Windows KB953297 and KB95184 installation problems.

  KB953297 would not - install error 0x66A code - so I've applied for support online 5 days ago. After 3 days, I got a response. I tried the solution, which involved the cleaning of dotnetfix tool. Subsequently, 953297 successfully installed, but now I get a message from "NET framework initialization error".  Not surprisingly, many programs don't more run properly, including MS Office and Acrobat Reader. In addition, there are a new update (KB95184) that is not installed. In short, it's a mess! I sent screenshots and vslog for the updated media type there is 24 hours, but I have not heard of him. It's a bit like watching paint dry: 5 days now!

  I think the problem is that I have no uninstall/clean and reinstall .NET Framework 3.5 (because the instruction of human support does not include this step). I would like to use the system restore to go back at the beginning of this episode and step by step, remove all versions of .NET Framework and reinstall them in the order. But I don't know enough about the restoration of the system to make sure that I will not make the problem worse by doing this. Can someone enlighten me if it is a safe and viable option?

  Hi yeye09,
   
  Thank you for visiting Microsoft windows Vista answers Forum.

  Method 1: manually remove and reinstall .NET Framework
   
  To remove and reinstall .NET Framework manually, follow these steps:
  Remove the .NET Framework.
  1. click on start and then click Control Panel.
  2. double-click on add or remove programs.
  Note each version of the .NET Framework is already installed on the computer. Then, uninstall all versions of the .NET Framework.
  When you are prompted, restart the computer.
  3. use the Windows Installer CleanUp utility to clean up the State of MSI database for all versions of the .NET Framework.
  4. download the Windows Installer CleanUp utility. The following file is available for download from the Microsoft Download Center:
  (http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe)
  For more information about how to download Microsoft support files, please follow the link
  http://support.Microsoft.com/kb/119591/
  How to obtain Microsoft support files with services online

  Click Start, point to all programs, and then click Windows Installer Cleanup.
  In the Windows Installer CleanUp utility, remove all Windows Installer for the .NET Framework applications.
   
  Restart the computer.
  Download and reinstall all the versions of the .NET Framework that were previously installed on the computer.

  Thank you and best regards,
  Vijay - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.