HP 350 1: laptop wireless adapter problem

I have problems about to connect to a wifi network. Sometimes my laptop does not show available wireless networks, even if I'm sitting next to the wifi router.

If I try to connect to the wifi, when an available network, the brand wireless on windows bar notification area spots turns into a red cross mark and say cant connect to available networks list netwok.the will also emply.and shortly after, once again it shows there's available networks.

This happens again and again.

If I run 2 or 3 times convenience store network, sometimes it connect to the network.

So now, I have to perform network troubleshooting whenever I connect to a wifi network.

If I turnd on wifi on shutdown of laptop, it takes a long time (about two minutes) to start windows.

If the wifi turned off when stopped, computer laptop startup kill 30 seckonds.

I tried driver re install, driver updates.but it does not work.

Please give me a sollution.

model-hp 350g 1

wireless adapter-Ralink Wi - Fi adapter 802.11bgn RT3290

driver version - 5.0.46.0

Windows 8.1 company

I think that you have tried them all... new driver, uninstall and reinstall... what else can it be? Maybe delete and physically to reinsert the card wireless, but if you do you could also stir this thing and put in a real wifi for $5 card.

Tags: Notebooks

Similar Questions

  • Connection with a XP wireless adapter problems

    PC crashed. "" After the file is missing or corrupted Windows\system 32\config\system. Ran the recovery disc, but now cannot access Internet.Using edimax nLite wireless dongle. Removed McAfee PC protection (Firewall), removed and reloaded dongle Driver.Removed again once and downloaded the new driver. Can see good signal from the router, but is unable to accquire network address. WPA2-PSK. Another PC and this laptop OK.

    Everything that I can reset or is it wireless adapter?

    Hello

    Maybe this can help, http://www.ezlan.net/wireless.html

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Satellite A500-1GL - card wireless adapter problem

    Hi all

    I had a problem with the card wireless on my laptop for months and have no idea how solve more.

    Basically, the wireless card seems to go through phases does not turn on. One day I can boot up my laptop and it works fine, then the next day it won't work. The wireless button on the front of the laptop is turned on but don't turn on the red light.

    In the past, I've managed to get over this by several reboots the laptop (until he decides to work) or reinstall flash, wireless etc. drivers card drivers. However, none of these things today seem to be making a difference.

    The worst, it's that there is no continuity with when it does not work and how it is fixed (sometimes reboot once fixes it, other times reinstall drivers fix it and so on).

    For this reason, I assumed that this may mean that there is some sort of hardware failure? But if I run the laptop in safe mode, the wireless still works without any problem.

    Someone has an idea what is happening?

    Any help would be appreciated,

    Liam

    Hello

    First of all I would like to know what system you are using and if you have tried to recover the laptop to factory settings in the past.

    The point is that these issues are mostly related software and could be solved by resetting the system.

    However, I think you know that the wireless network card can be turned on and off using the FN + F8 key combination.
    Have you tried this combination in the past?

    Second, you must check the WLan card status in Device Manager.
    The point is that problems of card driver WLan, Wlan card doesn't would be not listed correctly in Device Manager. So this should be the next step.

    Where the Wlan card is listed correctly, I assume that the driver is installed and working properly.

  • HP Envy Touchsmart: Failure on Envy laptop wireless adapter

    I tried to do the following in the suggested troubleshooting tips.   I opened a run prompt and type cmd.   I raised my privileges "Run as Administrator".    The open window with administrator: command prompt at the top of the page and followed steps 2 and 3.

    Reset the TCP/IP settings on your PC:
    1. go to your departure

    the screen menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    However, this is the result I got.     Even if I ran as administrator, he gave me an access denied message.

    C:\Windows\System32>netsh int ip reset resetlog.txt
    Global delivery, OK!
    Reset the Interface, OK!
    Neighbor reset, OK!
    Path reset, OK!
    Reset, failed.
    Access is denied.

    Reset, OK!
    Restart the computer to complete this operation.

    Why my computer tells me that access is denied when I run this function recommended as an administrator?

    This laptop will remain not connected to the internet.   Every 2-3 minutes that I have to turn off Wi - Fi and reconnect and then it will work for some time before she starts giving me messages 'server not found '.

    I reinstalled the wireless driver and the wireless button pilot.

    Donna

    Hi @dberkley ,

    Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on your laptop and get HP ENVY with wireless connections. Here is a link for the wireless connection troubleshooting.

    I would use the network of Windows 8 and resolution of the problems of the Internet section.

    I looked for a solution for this and that they indicate on the forums that if you change the channel of the router on a different channel, that might solve the connection problem.

    You could disable IPv6 for the laptop. Some say this helps.

    Solve this problem Microsoft Fix it 50413 here is a link to help as well.

    Make sure that all of your windows updates have been supported and discovered on the network.

    Hope it will be useful.

    Thank you.

  • 1030 N wireless adapter problems

    Intel r centrino wireless N 1030 r is experienceing or related material of the problems driver.  Unable to connect to wifi.

    No problem with other computers on the same router. Have no problem with Ethernet on this computer

    I use a HP Clubhouse dm4-3050 us Entertainment Notebook PC. and using windows7, processor i5.

    Would be very grateful for any suggestions / recommendations.

    Try the Intel driver update site: https://downloadcenter.intel.com/download/24345/Intel-Driver-Update-Utility

    If this does not work, I literally take the message and assume the N1030 wireless is a failure.

    Solution: Buy a N 300 USB wireless device.  Costs about $20.  They work almost always better than one that is integrated, and they are portable.

    Plug your new wireless USB device and let Windows install its own drivers, disable the built in N1030 one.

    Control Panel, network and Internet, network sharing Center, change the adapter settings

    Right-click on the N1030 and choose disable.

  • T60 wireless adapter problem

    Hello world!

    I reinstalled windows on my T60 and had no problems with my Intel PRO Wireless 3945ABG adapter.

    After one day it stopped working. The little green light on, even if a press fn + F5.

    I tried to reinstall the driver, and it did not help. I tried to find any problem in its settings, but I couldn't. I ran out of ideas.

    Can you help me, please? Anyone who has ever met this problem or similar?

    Thank you!

    Oh, God! I'm so embarrassed!
    After all these tests and installation, uninstallation, resettlement and do the same thing again and again, I discovered that there is a switch for her. Sorry everyone, I have no excuse. Oh, I could have: I bought just 5 days ago.
    I thought Maliha was fn + F5, I didn't know that there was a real switch.

    I apologize once again!

    Thank you very much for your help!

  • My in my MSI laptop wireless adapter keeps reseting itself every 3 minutes

    My adapter is an Intel(r) WiFi Link 5100 AGN

    Hello

    Is the WiFi just loss of connection device? It is too far from the router or there is interference
    in the path?

    Collate Support MSI downloads and driver.

    Support MSI
    http://www.msi.com/index.php?func=service

    MSI - Downloads (drivers and BIOS)
    http://www.msi.com/index.php?func=downloadindex

    MSI - Forums
    http://Forum-en.msi.com/

    MSI - Service
    http://us.msi.com/index.php?func=service

    MSI - Live Update online
    http://www.msi.com/index.php?func=downloadindex

    MSI - Contacts - USA - North America value
    http://www.msi.com/index.php?func=HTML&name=aboutus

    ============================

    Also check with Intel downloads

    Intel downloads
    http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%c2%ae+WiFi+Products&ProductProduct=Intel%c2%ae+WiFi+Link+5300+and+Intel%c2%ae+WiFi+Link+5100+products&ProdId=3062&LineId=1784&FamilyId=1783

    I hope this helps.

  • wireless adapter gets automatically disabled.

    Whenever I restart the system, I lost the wireless network card. So I need to go to Device Manager to uninstall and reinstall the network card. After he reinstall works fine until I have to reboot the system. Suddenly the system startup has also slowed to a lot takes about 5 minutes to start after the Welcome screen. I deleted the temp... just almost done but unable to find a solution for this.

    Hi Rajiv,

    Thanks for posting your query in the Microsoft Community. According to the wireless adapter problem is automatically disabled. Provide the following information:

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    I suggest you follow the steps in the article.

    Network adapter problems

    Windows wireless and wired network connection problems

    You can read this article for more information:

    How to reset the Protocol Internet (TCP/IP)

    I hope this helps. Let us know if you need more assistance.

    Thank you.

  • Cannot connect Stor.E Wireless Adapter + 1 TB HDD in my laptop

    I recently bought a Stor.e wireless adapter for use with my partner Stor.e 1 TB HDD laptop but I can't seem to connect to my laptop.

    If I plug the HARD drive directly into my laptop everything appears also ok but if I connect via the wireless adapter that shows nothing. the instructions that come with the adapter are very poor, but after following the instructions stating "plug drive HARD adapter using the USB cable then plug taken adapter (AC power), the LED flashes of HARD drive and the lights on the wireless adapter showing 1, 2 green, solid = power, wireless = 3 green, strong." USB = blue.

    The disc shows hard on my Android phone and the android Tablet but won't connect, when you perform a scan for wireless on my laptop devices, the adapter cannot be found.

    I sent twice, the support from Toshiba on July 5 and July 10, but have not received the courtesy of a response although confirmation of receipt of my e-mail, so for them we will get back to you in the DAY a statement.

    ANY help with this problem would be highly appreciated.
    Thanks in advance.

    Hello

    Stor.E WLan adapter extends a USB HDD with the ability to access data stored via a WLan connection.
    This means that you must activate your WLan on your laptop and configure the Stor.E WLan adapter first.

    The 3 LEDS have the following meaning:
    Above 1 LED is on / off and lights up green if the adapter is running
    The LED 2 is WiFi link and turns green where wi - fi access has been established.
    The 3rd (first from the bottom) lights up blue when the HARD drive is mounted. Flashing LED means read/write mode.

    How to connect?
    Connect adapter to Canvio Stor.E WLan adapt to the B USB 2.0 (near the reset button) microphone connector and connect the USB HDD to the type A USB 2.0 connector.

    You will need to activate the laptop s Wlan and press the reset button (hold it long 4 sec). The Wireless settings, you should see the Canvio Stor.E open wireless card that you connect access point.

    Then, in the Web browser using IP address: "http://198.168.65.1" to access the settings page of the Canvio Stor.E wireless adapter.

    In the preview, you can see the current version of the firmware, storage devices, network access point information.

    The list of devices shows detailed information on connected devices.
    Within the network, you can find the devault sotre.e wireless adapter network settings

    Now, you can use an Android application called Toshiba Wireless Adapter to move files on the HARD drive connected to the WiFi adapter from your smartphone.

    You can also map the card wifi as a network drive in Windows system.
    In type of Explorer: \\198.168.65.1. then right-click and choose map network drive.
    In a new window, select the application letter to the new drive (Z) and click the Finish button.

  • Toshiba stor. Connection wireless adapter E smartphone problem

    Hello world.
    I have a shop. E wireless adapter I can not connect with some devices. When I use my laptop, it works perfectly. I also tried with a s4 Galaxy and a Note 2, both work.

    My Samsung Galaxy 4 marks used to connect to this subject when I was on 4.4 kitkat firmware, I could access my hard drive without any problem. But since I upgraded 5.0.1 is not connected to its network Wi - Fi. I updated the adapter android app wirelessly on game store that shows an improvement on the lollipop. Network adapter is displayed on my rating 4 but when I type the password it does not connect. When I remove the password protection, it connects to the WiFi but I can not access my files.
    I also have the problem of connection with my sister's computer, it shows the Wi - Fi, but can't type the password.
    Does anyone know how to fix this?

    Thank you so much everyone.

    Hello.

    I would like to add that my sister's laptop is on windows 8.1, that would cause it not to connect?

    Thank you

  • laptop HP pavilion g6: ralink rt3290 802.11bgn wi - fi adapter problem does not not when turn on pc

    Hi iam using windows 8 64-bit HP pavilion g6 my adapter ralink rt3290 802.11 wifi bgn does not work for a few days because of the sudden closure of the pc by the battery problem, whenever it's strcuked reason more to heat or liquidated suddenly drops ralink adapter not worked for some time, now it not group days I updated my driver of latest vesion by the Device Manager in windows to the latest version still problem persists, I have to reinstall it

    Hi @eswar_krishna,

    I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the wifi adapter. I'll be happy to help you.

    The following pages are useful for troubleshooting wireless connectivity problems.

    Troubleshooting wireless network and Internet (Windows 8)

    In addition, you can watch the the power management of your wireless adapter:
    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Forget the network: (Windows 8)
    1. press Windows Key + C
    2. click on settings.
    3. click on change PC settings.
    4. click on network on the left.
    5. click on manage known networks.
    6. click on the name of the network.
    7. click on forget.

    Reset TCP/IP on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the Winsock Catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here, but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an ethernet connection:
    Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

    Test another connection:
    Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

    Please keep me informed of the progress of things.

    If you need help, let me know and I will gladly make all that I can to help you.

    Please let me know if that solves the problem by marking this post as "accept as a Solution.
    To simply say thank you, click the Thumbs up below!

    Thank you.

  • Problem with access point or wireless adapter

    Hello world

    tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
    The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

    Is there any online support?

    Hi smert

    Your message is not really useful.
    Why? Because no one knows all the details of the laptop, wireless network card system...
    So please would you be kind enough to provide more details.

    But despite the missing information, I recommend:
    (1) reset your router WLan
    (2) check the connection to the WiFi unsecured. (of course for testing purposes)
    (3) check the different (WPA/WPA2 AES, TKIP) encryption

  • Satellite P15-8409, Atheros wireless network adapter problem

    Hello. I'm having a frustrating problem with an old laptop Satellite P15. I restored the phone to default settings using the recovery disk that the system was working very badly. After that, the wireless network adapter has stopped working. In the Device Manager "Atheros AR5001X + Wireless Network Adapter" is marked with a yellow exclamation point. In the menu properties, under general, the State of the device the following is listed:

    The device cannot find enough free resources that it can use (code 12)

    The operating system is Windows XP Home Edition. The same problem has been present in SP1, SP2 and SP3. I also updated the BIOS to V2, but it also did not help.

    At work, we use a wireless internet connection. At home, I have a DSL connection. Curiously, when I plugged the network cable to the House, the yellow exclamation mark disappeared and a wireless connection icon appeared in the network connections window. I assumed that the problem has been resolved by updating to Windows; However when I brought the computer in the office, the wireless adapter was once more in the State I described.

    I searched the internet for the same problem, but was unable to find anything. I would be very happy to help.

    all the best,

    James

    BIOS version is installed on your machine? And you have you recently changed some hardware etc...?

    I don't know what it could be, but in the worst cases, the wlan card has certain shortcomings. You can check this by getting somewhere such an atheros wlan card or intel and install it instead of the one installed.

    Maybe the exchange of cards should solve this problem?

    Welcome them

  • HP laptop - 15-r150nm: problem with wifi after update realtek adapter

    Hello! I've updated some drivers of HP customer service and then restarted computer. When it is on I couldn't use wifi. When I select the problems, it says: 1) "" Realtek 802.11B/G/N WIFI adapter RTL8723BE has some problems to the program control or hardware. "" (it is Croatian, so I tried to translate it for you)

    (2) "a network cable is not plugged in correctly or may be broken.

    What should I do, I have only this laptop and internet wifi, write this work? Thank you!

    Hi @frane53nja,

    Welcome to the HP Forums!

    This is a wonderful place to find answers and advice!

    You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

    Learn how to post and more

    I understand that your laptop works OK and after updating drivers on reboot HP customer service, you have lost your wireless network. When you run the Windows troubleshooting tool, you received a message that there was a problem with the NIC due to recent hardware or software changes.

    Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

    Before you perform a restore, as shown in the above troubleshooting steps, you can try this option.

    Go to the nursery of the device

    Click the network tab to expand the list.

    Right-click on the wireless network adapter and select roll back driver.

    Repeat this process for all types of adapters listed.

    While on this screen please check this definition also.

    Right click on the wireless adapter and choose Properties.

    Click the power management tab.  If "allow the computer to turn off this device to save power" is checked, please remove and click OK. Repeat this operation for all types of adapters listed.

    Please let me know the results.

    Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

    To show recognition for my efforts please click the Thumbs Up below.

  • Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

    «Problem with access point or wireless adapter»

    Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

    HI Maria,

    ·         What operating system is installed on your computer?

    ·         You have installed the latest drivers for wireless network card?

    Follow the suggestions below for a possible solution:

    Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

    Method 2: See these articles for solve wireless problems:

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

     

    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

     

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Let us know if that helps.

Maybe you are looking for

  • JavaScript advanced options (subject: config)

    I know that the JavaScript options are unavailable on the options (in spite of finding a bad decision).I agree to go to the topic: config and try to solve things here. My problem is that the "advanced features" are not so clear that the activation of

  • Satellite M40X-189: I want to upgrade the processor?

    Hello I have the satellite m40x-189 notebook with Intel Pentium M 730 processor(1.6/2M/533). "I want to improve my CPU with Intel Pentium M780 processor(2.26/2M/533). Is this possible?

  • Error Validation of Windows XP on a computer Dell desktop purchased directly from Dell

    I bought a desktop computer for my parents to Dell in 2006. It came preloaded with Microsoft Windows XP. I bought the computer, the reception, the sticker above windows. It crashed in 2008 and we took it to a computer store in the city that we can no

  • problems of Empire earth 2

    land of the Empire 2 does not work on my pc, I have windows 7 and every time I try to run the game it appears with the logo of Earth 2 empire but nothing happens. I paid for this game because I thought by many people that worked on windows 7, please

  • Problem of Lightroom 5.7 with sides

    In Lightroom 5.7, the thumbnails are no longer showing information or star ratings. I followed the instructions in the section options display and nothing seems to help. I clicked on all the boxes in the view options and no stars or the info doesn't