Droid 3 signal, but no 3g

Similar Questions

• When calling from my iphone, I get a busy signal, but it does not

  Iphone5S: when calling from my Iphone, they get a busy signal, but I do not use it.

  Is do not disturb on? (icon of Crescent Moon in the right line at the top)

• IPhone unlocked 6 works on all carriers of the United Kingdom, but will not activate on mobile of delight that use EE network sim works in my 4S but 6 says not found carrier shows 3 bar on signal but will not activate the phone?

  uunlocked iphone6 works on all networks 4uk but does not work on mobile thegy delight use EE network it shows 3 bars of signal, but no name even sim card works fine in my 4S but bearer of 6 sows not found mobile delight just advise manual setting of the bu AFN will still not be enabled?

  any help appreciated MikeC

  Contact the carrier. In all cases the pleasure is not a carrier official iPhone.

• I have a yellow symbol Sun on my strength signal, but any other indicator bars works very well.

  signal strength indicator

  I have a yellow symbol Sun on my strength signal, but any other indicator bars works very well

  I am connected to my network, but still get the symbol as I said everything works fine

  Yes, but you have said that everything was  Come on, one could easily assume you meant everything but a connection to a wireless access point.  Never, you said that you were using a wireless connection, so that would not naturally be taken as part of anything else seen the way you described the problem.  * smile *.
  If it is purely aesthetic, you have two choices...
  (1) leave that would be.  To try to correct the cosmetic would actually damage something.
  (2) get the latest and the greatest drivers and full software for your network hardware manually by visiting the individual web pages for manufacturers and selecting the proper drivers, based on the model and operating system.  Uninstall all network components.  Restart so they reinstall.  Then, install the latest version that you downloaded.  Clear all memory networks and reconnect.  If this fails, consider using SFC/scannow.
  The second may or may not fix the problem.  The first works as it does now.  :-)

• strong wifi signal, but cannot connect to the internet

  I have a strong wifi signal, but I can't connect to the internet continues the smartphone and smart tv... help! We pay high speed internet but can not use it.

  Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have trouble connecting to the WiFi in Windows 7. We'll help you probably with the same.

  1. What happens while you are trying to connect to the internet with the Wi - Fi network?
  2. You are able to connect to internet while, you use a wired connection?

  You can try to follow the following suggestions to solve the problem.

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  I suggest you to consult the help articles and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks (Also applies to Windows 7)

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Wireless network connection is connected with the strong signal, but stops working at random times

  Original title: internet says is connected with the strong signal, but stops working at random times?

  Hello
  For the last few weeks, I had problems with my internet connection. Wireless connections say I am connected and have the strength of the excellent signal. I know that this is not an ISP problem because my other computer works fine. I will be reviewed fine and then all of a sudden, the site doesn't load any more, although I'm always connected to the internet. This happens on Firefox and Internet Explorer, this isn't a browser issue.

  I read other offered on the internet and tried all, but nothing has changed. I have checked proxies, disabled antivirus and installed new, checked firewall, ran a check for malware, etc..

  Any help will be much appreciated because it becomes very frustrating to have to keep reconnected my internet when he says he's working.

  Hello

  I suggest you follow the links below and check them with the question:

  Method 1:

  Step 1:

  Start your computer in safe mode with network and check the number: http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Step 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  Uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters, and then click on uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  For reference:

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  I hope this helps.

• WiFi signal but no internet connection

  I'm at a University in Tianjin, China and having a laptop with Windows 8 Ansus. I have a wifi router and a cable and had internet connection in this place in the past. I have reset the modem to create my network and password.

  I see my network identified by the computer but it says 'Limited', and there is no internet connection. I'm sure it's not not to do with the settings on my computer, and I had someone else to confirm. I have a connection when I go into a classroom and find their signal.

  What could cause the problem? How can you have a wifi signal but no internet? I invited people to ask the technicians at the school, but nothing has changed. Would it be a they forgot to press the button or something? There is no internet to the block of flats I live but the other parts of the school have.

  Just trying to understand.

  Stephen Hoare-Vance.

  Greetings

  The technician of the College gave us a different IP address for the connection. I guess that our block has a separate IP address of other blocks. Apparently the number after the third point is variable; a number any scope is ok. I couldn't communicate avec.115 but can avec.98

  I don't know why they changed, but the problem is solved, thank you.

  I also learned that when the router is enabled it will connect to the computer and display a signal, even if there is no connection to the internet.

• TV 32L3441DG no messages 'no signal', but has 2 working channels

  HY,

  After a normal after being completely turned off start, television seems tpo normal departure. but display only 2 channels. About 5 seconds after the image is displayed, the middle of the screen displays 'no signal' and a 5 minutes. timer, after which the TV automatically turns off (settings say 4 hrs.). I checked the cable to the satellite, but it's ok (why I'd get 2 channels if the cable broke?).
  In the settings, I don't see any satellites. the so-called WLAN works, but, for example, I can't verify the speed of the network. Teletext does not work, the guide does not work, the 'home' - button has no effect. But I have 2 channels...
  I have the firmware updated (3.6.3c updated January 29, 2015)
  Any help, idea, suggestions?
  It would be appreciated.

  Kind regards
  Christian

  Now, he's not a left soingle channel.
  I have another digital receiver and with which it works very well. This means that the intake unit stellite itself is OK.
  I'll call the Toshiba service to pick up the TV because I believe that the receiver is broken.

  Christian

• Excellent strengh of WiFi signal but no internet access

  I have a toshiba laptop with built-in adapter, adapter works fine with any other wireless networks that I connected without any problems at least 5 or 6.

  I have recently implemented a new network with new aol wireless router, a thompson speedtouch. The network is working properly and shows full signal strengh and connectivity, but I'm unable to access the internet.

  Other mobile home access the network perfectly, even if mine is the only laptop with Sp2! Is this a problem?
  I know very little technical jargon and saw hundreds of messages on google and this site, but none were of no help. I've done many things, but all seem to lead to ip/config - what happens with the error message - media disconnected and a timeout message and something about dhcp?

  Another path leads me to the "repair of the ' cannot complete this task and stop saying:"cannot renew ip address"." I downloaded the updates of microsoft for SP2, tried to update the driver for the card but tells me I have the latest firmware. Am completely stuck, reading around is not an uncommon problem, common but responses are not seeming to help me.

  Anyone with any help whatsoever would be amazing!

  Hello

  I also read on the net that sometimes if SP2 has been installed it of not possible to access the internet via WiFi network.
  AFAIK the SP2 installed and activated the firewall. Therefore, you should check if the firewall is disabled.
  In addition, the update of the driver may solve your problem.
  Check your WLan card driver version and if necessary, download and install a new one.

  The other possibility is that you have enabled filtering router's MAC address. Please check this box.

• Hi I have my computer will not pick up my wireless signal, but it captures others, in small residence also other devices pick up thanks for link wrong signal strong whats for your help

  Hello

  my computer will not come up to my wireless signals same signal is strong, but it picks up other signals wireless in apartments even block
  Thanks for your help

  Hello edwardmurray21,

  Thank you for the question!

  It is disheartening to know that have problems you with the wireless signal. As I understand it, you are not able to choose wireless sugnals.

  I need to ask you some questions to help you best.

  1. what operating system is installed on the computer?

  2. which browser is installed on the computer?

  3. What is the brand and model of the router?

  Answer to us if you are having problems with the signals wireless or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Excellent signal, but cannot connect to the wireless network

  XP Pro Client has been connected to the area by cable network, but now we need to connect in wireless. Card of TrendNet USB Wireless-N, no problems. The light is on the card, and the network is visible with a signal strong. When I try to connect, I get the message that it cannot connect, and the network may be out of reach. Sometimes, I get a balloon indicating that one or several wireless networks have been detected, but when I then try to connect, I get the same message. The PC is about 10 feet below the access point, with only a counter between the two. I have uninstalled, reinstalled, tried to update the driver, etc. Any help would be appreciated.

  Thanks for your help - problem was solved using the TrendNet utility to connect and add the key instead of using the Windows utility.

• [WRE54G v3 - EU] Strong signal but very low speed

  Hello

  I just managed to get my new WRE to work after digging around several useful threads. My laptop connected successfully through the WRE and I got the signal strength excellent (54 Mbit/s as the status of dialogue shown). However, when I tried to browse multiple web pages, they took a long time to load. I ran a test of speed at speedtest.net and I'm barely 100 KB/S download speed (sometimes, it falls as low as 50 KB/S). Before when I connect my laptop in my room through the living room's wireless router, the signal was weak but the download speed was decent.

  Is that what I can do to help increase the download speed? Any idea/useful experience will be greatly appreciated! My router is not Linksys but custom-made by my ISP to support DSL, phone and TV at the same time.

  Thank you!

  What is the Distance between your router - WRE54G and computer. Make sure the Distance between your router and not more then 40 WRE54G fts 40 fts and the distance between your WRE54G and not your computer. Once you have done this right connections, after that, you can check the speed of your computer.

• Wireless connectivity problems: Windows Vista displays connected to the internet with good signal, but cannot access the internet more than a few seconds.

  Hello

  Recently, I brought a Dell with Windows Vista and a Belkin Wireless adapter in my house somewhere else. The computer has never had problems connecting to wireless internet on the other networks, however since the move I was not able to access the internet. Sometimes the network shows only a local connection and not Internet and other times, the network has a strong signal, a network identified and even an internet connection, but when I open any browser, it is only able to load the Google homepage and I cannot navigate anywhere else. I turned off all firewalls and even uninstalled all 3rd party software protection. I checked all my browser settings and made sure they detect automatically the IP settings and proxy settings. In other words everything seems in good shape, but I still have no navigation capability. Any ideas?

  It turns out that I had to remove all the old Wireless USB software that had been used previously (there had been other versions of Belkin and Linksys). I then used the computer from my friend to download suitable driver on the Belkin site for the internet adapter USB I used and BAM.

• Signal, but no receivers connected to cope.

  Signal QDeclarativeEngine::quit() emitted, but no receivers connected to handle it.
  

  I can't operate the simplest QML. Who is created by the wizzards QML for Blackberry and Desktop. The same unchanged examples work on Windows and Symbian. But I always get the message that precedes, when I deploy the application on the Playbook.

  Is there any sample specifically for Playbook you tested tutorials or work?

  Put this line in main.cpp, has done:

  QObject::connect((QObject*)view.engine(), SIGNAL(quit()), &a, SLOT(quit()));
  

  Is this a bug?

• Windows Media Center - recorded not from TV Signal, but TV signal is good

  Windows Media Center record regular shows without problem until last week. Now I have to manually press record for each show, because the Scheduler is almost completely useless, the TV signal is absolutely perfect. Once I pressed record manually, it records very well.

  In regular history, the error is not recorded: no TV Signal

  This is simply not true. I noticed that this can happen, in particular, to the HD recordings. But the signal is always good.

  I tried to delete the programmed recording file but no change.

  6280 SCT dual dvb - t2 bda tuner Windows 7

  The system restore did not improve anything.

  In fact, in this case, I found the removal of all channels and re analysis for them this is the solution.