Update Windows XP SP3 on a Dual Boot System w/Vista

Hello, I have a partition of windows xp and windows vista in my laptop Acer. (Pre-installed Vista and XP as a secondary operating system).
My questions are:

> Is it OK to upgrade Windows XP SP2 to SP3 of Windows even, it is placed in a dual boot?
> Don't install SP3 will be erase all content of Windows XP?
> Is affected the partition of Windows Vista if I download Windows XP SP3 of XP SP2 Partition?
> If I download the SP3 for Windows XP in the Microsoft.com site, it needs to be bootable and recorded in a CD or just run the installer from the hard disk automatically after installation?

Thanks to all in advance!

You're off topic of the Forum, you have published, which is dedicated to the beta Version of Microsoft Security Esentials

However, I moved the yoru post.

You can update to SP3 on a system XPSP2 dual boot Vista residence. You can not install XP * after * Vista for a Dual Boot system unless you use a 3rd Boot Manager part.
Run the update to SP3 does not erase anything, it updates the XP system components.
There will be no impact to your Vista installation on your system to dual-boot PC.
SP3 is an update. It downloads an installation program analyzes your installation of XP and downloads the bits necessary to update to SP3 then install them after you have saved the files it will replace. You should be able to get SP3 easily by going to Windows Update in XP.

-steve

Microsoft MVP Windows Live / Windows Live OneCare, Live Mesh, & MS Security Essentials Forums Moderator

Tags: Windows

Similar Questions

  • Windows XP does not start in a dual-boot system

    I have a Windows XP and Linux Mint 10 Julia on separate partitions in a dual boot system. Windows has been installed first, followed by Linux. Initially, the two worked, then, for some reason any I had to reinstall Linux. Now I can't get into Windows.
    I can't enter the recovery by using the Windows CD Mode if that helps.
    GIA

    booting from cd is not always the best way to start an operating system installed on disk 0, for example drive C.

    Yes, the default value for fixboot will always be the first drive to the motherboard, regardless of how many additional hard disks are installed.  It is the way windows is designed to be.  but in all fairness, you can start windows via a USB key with recent technology created by hp.com

    also, if the disk check found a few errors then it means that there are corrupt or missing files.

    so, at the command prompt go ahead and Run fixmbr, fixboot, bootcfg /rebuild and a chkdsk/r

    You can also type help at the command prompt to get the details of the above.

  • When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

    I am running Windows 7 Professional.  I have a piece of equipment that has only Windows XP drivers, I desperately need to work.  I read up on top of the virtual systems and XP mode.

    When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

    Thank you

    Andrew

    You must attach the USB device to Virtual PC XP Mode: http://support.microsoft.com/kb/824369

  • Windows 8 is supported in dual boot?

    Dear sir/maam,

    I use a laptop Dell Inspiron 3520, Windows 8 pro. I want to run Ubuntu using dual boot on my pc. Can I do this?

    If so, how? Please help me as soon as POSSIBLE.

    Thank you

    Sreevamsi.

    Hi Sreevamsi,

    Yes, Windows 8 is compatible with dual-boot. You can install several operating systems on the same computer and the same hard drive.

    You can also see the link below.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/can-Windows-8-run-with-multiple-OS/5c3464bd-10de-4536-95BF-6bb11c9d60fe?msgId=1069a856-a3d3-49B2-A703-e4947ec2dfb6

    For information on how to install Ubuntu on Windows 8 as a dual boot, I suggest you to contact the Ubuntu support forums. You can post the question on the link below.

    http://UbuntuForums.org/

    Feel free to write us if you encounter any other issues. We will help you to come.

  • No its w/WinXP Pro (Dual-boot system)

    I have 4 computer Pentium Gateway w/WinXP Pro and motherboard that has never worked for her so I added a sound card and that worked. Then a friend added a dual-boot system (Ubuntu) and installed the drivers that showed me that the sound of the motherboard works with Ubuntu/Linux, but not for XP. Now I'm stuck change between MB & sound card. How to do his job on my MB with XP? Thank you.

    You still have a problem the appliance in msinfo32?

    What the Manager device, is it still show something in the other devices section?

    Remove the card from its complement and distributed to msinfo32/Device Manager and see if the problem is still there.

    When you reported it as an E-4100, was it of msinfo32 or from another source, such as a label on the case?

    There is a "Download hardware detection' link on the page of the gateway I provided above, what happens if you try to update material from this link?

    You can also try Windows Update as a last resort.

    Tricky

  • Laptop with XP/Ubuntu Dual Boot (grub 2, not to wubi). How to safely to Windows 7 without losing the dual boot ubuntu?

    Hello

    I have a laptop Dell Inspiron 6400/1505 (1.73 Gz, Intel Core 2 Duo, 2 GB RAM, 750 GB (7200 RPM) HARD drive) with Windows XP and Ubuntu 12.04 LTS installed in dual boot. I installed Ubuntu in a separate partition, not not using WUBI. Since support for XP runs in the month of April, I have to upgrade to Windows 7. I would like to know if I could pass safely XP to Windows 7 (I understand the parameters and programs cannot be transferred to the upgraded version of Windows and must be done manually) without disturbing my score of Ubutnu and the GRUB that starts when I turn on the computer. What are my options if this is not possible. I know one option is to completely wipe the hard drive and start over. But I just wanted to know if I could save my Ubuntu installation.

    PS. forgive me if this has been discussed already, please redirect.

    Thank you

    Joseph.

    To begin with, as you already know, there is no way to upgrade from Windows XP to Windows 7, it will have to do a clean install.  When you install Windows 7 it will rewrite the MBR and dislodge the grub, you need to reinstall GRUB after Windows installation and you need to add the Windows installation for the grub.

    John

  • Error message trying to update Windows xp sp3

    I just do a fresh install of windows Xp sp3 replacement, that I got from Microsoft. I tried to update to windows, as I do when I reinstall windows and got the error message "the site has encountered a problem and cannot display the page you are trying to view. This is the first time I met it with this drive. Usually, this is no problem at all. I tried to go through various corrections on this site but there are several and I think I did more harm than good. I just reinstalled windows again, try to update and received the same error message.

    I hope that someone can walk me through this time and end up with the right solution.

    I just do a fresh install of windows Xp sp3 replacement, that I got from Microsoft. I tried to update to windows, as I do when I reinstall windows and got the error message "the site has encountered a problem and cannot display the page you are trying to view. This is the first time I met it with this drive. Usually, this is no problem at all. I tried to go through various corrections on this site but there are several and I think I did more harm than good. I just reinstalled windows again, try to update and received the same error message.

    I hope that someone can walk me through this time and end up with the right solution.

    [1] turn Off automatic updates and leave it off.  Disable the notification of screen nag is a problem to have automatic updates off the coast.

    If you have not installed IE8, IE8 install using the exe to install full version offline and the decline of downloading updates.

    [2] when you have Win XP SP3 and IE8, it will be a necessary file

    http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

    Install this update and then RESTART the computer before moving on to Windows Update.

    This should eliminate a known problem that manifested by blocking windows update to do research without end and CPU at 100%, what is happening unless the most recent monthly cumulative IE security update is already manually downloaded and installed.  Second Tuesday of each month, this will be a ritual to perform or windows update crashes.  This is caused by a problem with the site Web of windows update is not a problem with your computer. Microsoft is committed to solve the problem which has continued for months.  Promises, promises.  The genesis of the issue took place in the summer 2013 and has been reported in this community after the updates of August, when it was reported that the last cumulative update of security for September KB2870699 be downloaded and installed manually set the CPU of fortification to Windows Update.  The linked thread shows this being reported in September and a month the well-known universal question went from bad to worse, with the installation of the updated cumulative security for IE being the fix manually.  The problem has been compounded by a bad Microsoft Fix it tool that was linked by Microsoft as the fix for Windows Update problems, but the difficulty bad it tool would then instantly to corrupt the registry of a computer of the user and cause an additional problem that would make the BITS and the two stop work, worsening the problem instead of fix windows update problem.  971058 is the famous set and there are other iterations that have the same bad code and cause the corruption of the same register.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/automatic-updates-and-Svchost-100-CPU/0715db9f-01e0-484f-87ea-10eff88a3e2d?page=1

    The linked TechNet page

    http://TechNet.Microsoft.com/en-us/security/dn481339

    will give you a link to most recent monthly cumulative security for internet explore that you must manually download and install before you will not be able to access windows update

    https://TechNet.Microsoft.com/en-us/security/bulletin/MS13-097 is this month December 10

    Select the download that is necessary for your version of Internet Explorer and download and install it and restart your computer before you visit Windows Update to get other updates which will then become accessible, after the prior cumulative IE security update is downloaded and installed MANUALLY and the computer is RESTARTED.

    The steps above should solve the more obvious and certain to problem. However, there are two other known problems that may also arise and are common questions of interest as the extra aggravation.  The first issue is certain and the other 2 issues can also either or both be also present in the form of a complication.

    It often happens that the installation of SP3 will break the windows update feature by not properly installing the windows update agent.  An older version of the windows update agent can be downloaded and saved in the C directory and installed by an execution command.

    http://download.windowsupdate.com/v7/WindowsUpdate/redist/standalone/WindowsUpdateAgent30-x86.exe

    Update: a later version of windows update agent is available during one of these linked pages

    http://support.Microsoft.com/kb/943144

    http://support.Microsoft.com/kb/946928

    Start > run > C:\WindowsUpdateAgent30-x86.exe /wuforce

    Steps 1-4 or 5-8 alternatively should solve the problem with the windows update agent.

    http://www.ehow.com/how_7176381_microsoft-install-after-installing-SP3.html

    Here is an associated KB article which does not have the entire article on the causes

    http://support.Microsoft.com/kb/927891/en

    Another article linked here shows this is not a new issue, but has been perennial

    http://blogs.technet.com/b/asiasupp/archive/2007/05/29/automatic-update-causes-Svchost-exe-high-CPU.aspx

    To connect to Windows Update the old version of Windows update agent detects installed and the latest version will be installed after consenting to the ActiveX installation.

    If this does not resolve the problem with Windows Update, then troubleshooting must then attend an essential required service BITS called which may be dysfunctional and causing the problem.

    See this thread and response noted the response of Xircal.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/win-XP-Pro-SP3-update-does-not-start/a583105f-6a52-4d69-94ee-6fc3e2da3c8a

    BITS is a necessary process that was recently discovered to have been broken on many computers by a faulty Microsoft Fix it troubleshooting and repair tool.  Fix defective it also caused users of computers for months and the same programming coding error can exist in others not yet identified software provided by Microsoft.  A registry fix has been designed with this problem by a member of this community.

    http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/bits-error-1290-0x50a-following-updates/9457b57d-1cb4-49f8-b62b-7fc8b226ecca?page=7&msgId=3eda6593-d29b-4173-aa24-77838e21739a

    This is one of the many reported uses of third party 'repair utilities' successful

    http://www.philmorgan.NET/techie-tools/Windows-Update-bits-Background-Intelligent-Transfer-service-fix-batch-file-for-Windows-XP

    Here's another

    http://www.tweaking.com/content/page/windows_repair_all_in_one.html

  • After installing Windows 7, the option to dual boot with my Windows XP already installed is not available.

    PROBLEM TO DUAL BOOT XP AND 7... 1 XP

    I have 4 partition one my h/d. in win xp (S.P 2) c drive is already install. now I install win 7 in d. disc 7 victory is also insal smouthly. but when I restart my computer, startup bual option not shown... only xp boot otometicaly... why?

    EasyBCD to add Windows 7 in the start menu. Note: after you have installed Windows 7, you should have a folder located in the Windows XP partition named C:\Boot (BCD store) that's what Windows 7 and XP boot build to start with. Easy BCD will list each operating system in the BCD store and also allow you to add an additional OS (in your case, Windows 7) and set the default OS after a 30 second delay.
    http://NeoSmart.NET/DL.php?id=1

    J W Stuart: http://www.pagestart.com

  • Error installing Windows Update Windows XP SP3

    original title: Windows Windows XP SP3 updates

    I have problems with windows update. IAM on windows xp service pack as 3.i ran Microsoft fix it Center and it detected that my update of windows components are configured incorrectly. Where should I go from here. Any help would be greatly appreciated

    Try to reset the windows update components and verify if you are able to install.

    You can reset windows update components by referring to article:

    How to reset the Windows Update components? http://support.Microsoft.com/kb/971058/en-us>

    Download and save the fix it 50202 from the page above.

    Close all open programs and browsers before you run the fix it.

    As downloads fail, when run you the fix it choose its mode by default when you run the first time.

    When he finished, check if download updates now.

    If updates are still not download after running it, then run it again and choose his Aggressive mode.

    Then reboot and see if the download updates now.

    Please let us know if it did or did not help to solve your problem.

    UTC/GMT is 00: 05, Monday, December 5, 2011

  • . PST to Outlook 2007 (including IMAP) can be shared on a dual boot system Windows XP/Win7?

    I'm migrating from Win XP Pro/32 for Win 7 Pro/64.  I dual-boot between the two while I migrate and test applications.  During the test, I would like to have Outlook 2007 use the same mail/calendar/contacts /... on both systems.  Among the files of e-mail are IMAP which seems to make the process more difficult.  Is this possible?

    Thank you!

    This can happen absolutely not.  I do it.

    Before you do anything, make a copy of your default PST.  Nothing of what I describe should affect your data somehow, but you can't be too sure.

    You don't have to worry about IMAP accounts.  IMAP accounts always have their own sets of folder, but given that the data are kept on the server, two prospects will see the same data.  In order to see your default folders, then Outlook closed (on a partition), move the PST file to a folder that can see the two partitions.  I have two partitions (XP and 7 on the other) on my main drive and I put my PST in a folder on a second disc.  After you move the PST file, start Outlook.  He will complain that it cannot see its records and give you a file browser window.  Navigate to the new location of your default PST, select it and click OK.  Outlook open and look exactly as it did before.

    Close Outlook and start the other partition.  Open the mail applet in the control panel (you may need to enable the 32-bit Control Panel), click the data files button, click Add and browse to the shared PST file.  Select it and click OK.  Now, click on set as default to make the place of delivery.  This will make the default folders (calendar, Contacts, Inbox, etc.) Similarly to the second partition.  Close the control panel and starting Microsoft Outlook.  You should see exactly what you saw on the other partition.

    You will also see the old PST, if you have one configured and you can move all data you want form saved the old default files in the new default folders by opening each folder, by selecting all the data with Ctrl + A and moving the selection.  (You can use copy instead if you want to have the original PST as a partial backup.)  For the calendar, you must select a table as per prior category view works Ctrl + A. Brian Tillman [MVP-Outlook]

  • Windows Vista Ultimate: SP1 CD can not install for me to Dual-Boot 7 and Vista

    Hi I'm new here.

    I have Windows 7 Ultimate on my computer. I have 3 drives, F: reserved system, C: (where Windows 7 is on) and blank D: 20 GB Partition.

    I am trying to install Windows Vista, so I can dual-boot, but I get an error code saying that there is not enough disk space on my F: reserved system, but I try not to install it since their, I try to install from the D: drive.

    So I tried another way, I Booted from the CD, and Setup continues. But, when I clicked on my D: drive it says it cannot copy files when going from 3%.

    Question:

    1. I did a wiped fresh clean installed Windows 7 Ultimate, and it created a partition of 100 MB. What's causing Windows Vista to install correctly?

    2. If Question 1 was the problem, do you think I should wipe my entire C: drive and erase the entire disk for Windows Vista to fix itself?

    Thank you

    New Member.

    I found the problem:

    System reserved (f) had to be removed... (:

  • For Windows 8.1 and XP dual-boot

    After buying a desktop PC HP Pavilion 500 - 245ea last week, I find now that I can't run a significant number of programs I use on my XP Machine, and instead of running two PC, I need to set up this new PC with Dual Boot installation.

    To do this, I need to partition the hard drive and install Windows XP first before installing Windows 8.1, which is difficult with a preinstalled windows 8.1 already on the PC and no record of widows 8.1.

    Please notify

    Hi, Jack:

    I don't know of any PC, you can get today who have the support and drivers for Windows XP.

    Al I can say is that if you want a PC based on an Intel processor, you cannot get one that has a 8-series chipset.

    Intel 7 series and older chipsets support drivers for XP somewhere - not necessarily have HP.

    Then, you also have to make sure the graphics and audio chips drivers XP.

    Try to get a PC with the Realtek HD audio chip.  Realtek has XP drivers for audio.

    Best regards

    Paul

  • Upgrade to Windows 10 having dual-boot system

    I have the laptop dual boot with GRUB. An Ubuntu Linux operating system an another Windows 7 Home Basic 64 bit.

    I booked for 10 Windows. If I switch to 10 Windows, Linux will be mess up.

    If yes what should I do before installing to prevent my system dual-boot any problem

    I did it and works very well.

    I am currently dual-boot Windows and Linux; the upgrade to Windows 10 will affect my Linux installation?

    NO.

    Learn more: how: upgrade installation dual boot Windows and Linux to Windows 10 - part 1

  • I have a dual boot system. Windows xp and Windows 7. Photoshop elements 7 would not go on Windows 7, so I bought 13 items. Slow as Christmas. Do not bother to use the speed it takes to work on pictures

    I have a system dual boot, xp pro and pro 7. Tracks of Photoshop elements 7 very well on xp, but would not go on windows 7. Items purchased 13, very, very slowly. Slow to work on photographs. I bought new ram and makes every other optimize the ideas I found online.

    Any ideas.  4g RAM, mother e m2n, NVidia, Asus anthlon 64 video card x 2, 2 + processor g

    Please post related queries from Photoshop Elements

    http://forums.Adobe.com/community/photoshop_elements

  • Can not update windows XP SP3

    Hello

    After I format a computer and try to get the updated windows, it gives 0x8024D001 error code
    I tried all discussions about windows update errors, but there is still no result.
    I am also attaching the image.
    Help, please.
    Thank you.

    Hi Tommy,.

    You can go ahead and try the steps of troubleshooting provided in the link below and check if they help to resolve the issue.

    You are unable to access the Windows Update Web site on a computer that is running Windows XP

    I hope that helps!

    Let us know the status of the issue once you have completed the troubleshooting steps.

Maybe you are looking for

  • I have a new router for my desktop and can't access the internet on my Dell laptop with the wireless feature.

    I get the error message "Windows was unable to find a certificate to log the edandjane network. What is the certificate that I need and how to reset my computer so I can get on the network with my laptop. The new router is an edandjane SSID NetgearN6

  • change timeline view

    Change the timeline viewCan it be replaced by a better readable in the foreground and background?As a white background. Black in the foreground.Difficult for me to make cuts, changes, markers.Charl

  • VMware Fusion - using puppets vmdk VM to opening training

    Hey communityHaving recently purchased the VMware Fusion Pro (v7.1) on my laptop of macbook air OS X Yosemite I had struggled to open the vmdk VMs of the puppet of training https://downloads.puppetlabs.com/training/ Web pagesI chose import existing v

  • Molecular mapping

    I want to draw two circles and then join them with two lines, creating a bond strong.  But then I want to move my carbon atom and keep the link between my two atoms. As a mind map that I can move the autour object and then the connection of the lines

  • change color difusse

    HelloI like change and set the diffuse color even at two different materials at once with a single button,The following code works for a material but I can´t find a way to make it work for both materials at the same time.function color01 (ral1016){va