Similar Questions

• Cannot update - download seems to be corrupted. Please try to download it again. (U43M1D204)

  Cannot update - download seems to be corrupted. Please try to download it again. (U43M1D204)

  Has tried again and again and again... Nothing!

  @ Adobe, any help please? CC has been a pain in the @rse for a while now, the problems of updating and it keeps disconnecting me!

  Hi Yves, thanks for the help, but I tried to update this morning (before I read your response) and it installed OK this time.

  Don't know what the problem was, but that's all is OK now.

  Thanks again for your help,

  Kind regards

  Mick

• Update the BIOS from the corrupted file Satellite R830

  Hi all

  I tried to download the update to the newest BIOS for the model R830, but I find myself with a corrupted zip file each time:

  http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20110908125815.zip

  Does anyone else have this problem?
  Any person who would be able to send me a working mail folder (disposable (@) angelwithagun.com)?

  Thank you very much!

  Bye,.
  one.

  Hello

  I was able to download and managed to unpack this package BIOS correctly.

  No error message now!

• SmartView 11.1.2.5.400 - zip corrupt?

  Hello

  I recently downloaded SmartView 11.1.2.5.400 zip and could not decompress - corrupt zip archive.

  I have tried different browsers (IE, Firefox, Chrome etc) and download the sources (delivery and OTN).

  
  

  Everyone knows the same? If so, with which it touches that this issue be fixed?

  
  

  Thank you

  Gabriel
  

  For me that it still does not - I think that we are downloading from different sites "mirrored".

  So, while giving up on this approach, I found a replacement on Oracle's Support Portal:

  Patch 20327649: Patch Update Set: 11.1.2.5.400 for Oracle Smart View for office

  Finally, I have something that works and that indeed there is size: 124MB

  Bravo and thanks for trying to help anyway!

  -Gabriel

• last update of iPad 2 Air corrupt (9.3.4)

  It's the most recent * - upward by Apple - every time (5 attempts) trying to update the software on my Air 2 to 9.3.4 iPad I get a message (error = 1403) indicating the update had been corrupted during the download - after nearly 20 minutes of time to download on a 30mps connection. I cant do anything, it seems, to get a non corrupted version!

  Bye bye Apple - you finally convinced me that you are completely useless.

  You can try to apply the incremental update to settings > software update.

• Update NVIDIA 275.33 defective; corrupted video driver display with driver WHQL

  The message below was copied and pasted under nvidia Forum Legacy drivers.  Necessary information can be found in the copied message.

  Because it seems to be no activity on this site regarding this post, I thought that it is better to publish below.

  The reasoning is that the pilot was clearly corrupt. is available at FileHippo.com and other sites and is supposed to be a Microsoft WHQL certified file.  In my view, that this may not be true in this case, as will demonstrate it the message pasted below.

  PASTED the MESSAGE FROM THE FORUMS, LEGACY nvidia DRIVERS:

  Under XP Home SP3 with GeForce 6200 256 MB PCI card. Also running avast! Version of COMODO Internet Security 6.0, 5.4.189822.1355, Sandbox disabled at time of installation in the admin.

  Does anyone else have this problem?

  I was warned by the Update Manager in the current version of the 6.14.12.7061 driver that a newer version of GeForce was available June 2, 2011 version 275.33 by download. Check the properties of file after download, I noticed that had no Digital Signatures tab. Avast! scanned and said the file was clean. COMODO, however, cast alerts on Digital Signatures missing, so I chose to ignore without remembering, and as far as I could tell, the installation was completed successfully.

  Because this file was not Digital Signatures that are normally found on the files distributed by reputable companies, I took care to the image of my system first. I just checked a few minutes ago, and the same file downloaded earlier is the same exact file I got on June 2, with the exception, it has been downloaded FileHippo.com. The first file was downloaded from nvidia.com, also a 32-bit XP file.

  A reboot is required, system restarted after installation on June 2, and I noticed immediately the logon screen has not been defined as before. Check display system properties after logon gave the following information: the screen resolution is only 640 x 320, (not sure) and the bit of color was only 4-bit color. No matter what I was doing, I couldn't reset the resolution or color for the settings I had before 1280 x 1024 or 32-bit color.

  I also had a close dialogue of M$ box that appears repeatedly, stating that COM updated necessary to close, and whenever this happened, I chose not to send the news of the accident.

  NVIDIA abreast of this file is probably be corrupted? I've never had this problem before. NVIDIA is no indication that the card that I run is supported.

  Why do Digital Signatures missing properties file? It is indicated as a M$ certified WHQL file as well.

  As it is, I'm now getting alright ATM, as I've restored the image to return to where I was before the installation.

  The new Manager to update my current version of the driver have been corrupted or redirected?

  ???

  Joe, aka mchain

  As I said above, never had this problem before with this OS.  Win98SE was a different story, so he backup before installing a new driver was always careful.

  I find this problem to be a little weird at best.

  Any help or information would be appreciated.

  Joe

  Umesh P,.

  Final installation of the new driver file, nvidia 275.33.  Installation was successful.

  It turns out that the first available driver file has been altered, because it lacked the Digital Signatures tab, but a more recent file turned up at nvidia, only an hour or two later.

  This one said certified June 2, 2011, 03:17, on the Digital Signatures tab and the file listed as OK.

  a mistake has been made, and nvidia has released the file without Digital Signatures on the first version, he little time (two to three hours later) corrected with the correct file.

  First file has been deployed on June 1.  Digital Signature time unknown.

  Time line fits, so it was probably a goof on the part of anyone.

  Thanks for getting back to me.  Busy here, I'm sure you're here.

  BTW, Device Manager cannot see the compressed file (a good known) to proceed with the driver installation.  I installed by choosing "open" and open the file and ran. "

  Fixed a problem.

  Joe

• updated security KB3013455 and make corruption

  I tried to uninstall the update.  He reinstalled himself. Changed settings do not install the updates and uninstalled the update again. Restarted the computer.  Enter a last restore point (a few weeks) has not helped, because he reinstalled himself later.

  Problem persists. An impact on all the programs I tried, that is mail, internet, word, etc.

  Is there a work around for this yet?

  Thank you for your help.

  If it's a 64 bit Vista computer, see this page from the Download Center (and expand the section for DETAILS). Note that there are 2 two downloads.

  If it's a 32 bit Vista computer, see this page from the Download Center (and expand the section for DETAILS). Note that there are 2 two downloads.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If KB3013455 is installed already/yet, manually install the fix KB3037639 so that autonomous will correct the problem of the "police corruption".

  If KB3013455 has a no/no installed length, manually install KB3013455 (followed by a restart), then KB3037639 as standalones will fix the problem of the "police corruption".

  Also, check out the FAQ section of (18 Feb-15) revision of this page.

  [Last updated - 20 February 2015 21:29 UTC]

• Update firmware HDD (D2D5DEM1.zip) Vostro 3350 take too long (can be never finished)

  Hello

  I bought a Dell Vostro 3350 two years ago

  I just downloaded drivers for it from Dell's Support page

  http://www.Dell.com/support/drivers/us/en/19/SERVICETAG/D5M7GP1

  I tried upgrading the disk HARD firmware (D2D5DEM1.zip - Seagate Momentus 2.5 ", SATA, 3 Gb/s, 7200 RPM, the 512th Firmware update) follow the GUI window

  Restart the computer in a screen black I see something on the screed, it's the last lines on this subject:

  []? 0xc054571d

  [<0c54567e>]? 0x0c54567e

  []? 0xc0417936

  _

  In the last row, the BACK still blinking cursor...

  It does not change during a night, nothing happen next :(

  What should I do, now it doesn't always work like that, I don't know what to do so I let continue working and did not stop it

  Hope I can get an answer before I do something wrong :(

  Thankssssssssssssssssssssssss

  Hi Quyen194,

  I don't think you have choice to restart the system and see if the firmware update has been installed correctly.

• I don't see the tabs interface options after you install the 2015.006.30119 update. My installation is corrupt?

  I have Windows 7 Enterprise x 64 on my computer to work with Adobe Acrobat Standard DC (classic). I just had our IT Department install the update 2015.006.30119 to be able to use the announced features (tabbed interface). It shows that the currently installed version is 2015.006.30119 in the window 'about' and in programs and features in Control Panel, but the General Preferences tab shows no options on the new interface options to tabs. I inserted the images of the two opinions 'about' showing the version number and the General Preferences tab. While I am not too concerned about a feature that I've never had before, it would be useful in some located to try and it worries me that installation is corrupt if the new features added by this version supposedly aren't really there. I also tried re - apply the update and run the utility to repair facility. Any help would be appreciated.

  

  

  The classic yarn (bought) has no new features added, except every year or two for a paid upgrade. Only the subscription version has tabs.

• error 42125 zip corrupted archive

  c:\users\owner\appdata\local\temp\nspfoe5.\temp\1\ativgadriver8.0.zip|>vga\cpanel\kernal.ex_erroe42125(ziparchivecorrupted) what I do?

  Hello

  Thank you for joining Microsoft Community!

  We know only not on this topic. I would like to ask you a few questions:

  1. when exactly you receive this error?

  2. what you trying to do?

  Please come back with more information so that we can help you better.

  If you need help on Windows please keep us informed.

  We will be happy to help you!

• p10404530_112030_AIX64 - 5L_5of7.zip corrupt?

  Hi all

  11.2.0.3

  AIX 64 bit

  I download setup 11.2.0.3 Aix 64 bit of MOS, but it seems that the 5-7 file is corrupted. All other files 1-7 is correct.  The 5th file size is 850Mb but it always stop at 780Mb, I was downloading it 5 times and its wasting my time and duration of internet bandwidth already.

  Do you know of another site to save this file? Or is there a technique to download this file?

  Thank you

  Petra k

  You must open an SR for this problem - no one on the forums can help - there is no alternative site to download this file

  HTH
  Srini

• 11g manual Tuhra zip corrupt downloads?

  Hello
  
  A few of us at my work have tried to download the TUHRA code downloads (https://tuhra2.samplecode.oracle.com/servlets/ProjectProcess?pageID=xL5gyF) - Chapter 19, phase V for example - and may get them to decompress. We tried on different computers using different unzip utilities and we tried to upload different files zipped page. Others have this problem? Is there a different download site?
  
  Thank you
  
  Steve

  It works for me. Maybe a problem to scan viruses at your side...

  Timo

• update of Windows 8 corrupt my installation of the HP software

  I have a HP C7280 all-in-one on a wired network connection. I have a desktop Windows 8 with the HP software installed. It worked fine until a week or so, when I discovered that among the updates of Windows 8 installed corrupted my installation of HP. I don't remember precisely the update was responsible, but there was about 24 Windows updates installed so far this month. Now when I try to open the HP Solution Center, I receive a message indicating that the configuration is not complete and re - install. I have downloaded the software suite, performed a "Uninstall" and then reinstalled the software. However, the printer still fails to complete now.  I could perform a restore of the system to a date in early October and then disable the updates of windows. But this isn't an optimal solution.

  So, I'm stuck and could use some help.

  I found the updates of Windows 8 corrupt my HP environment security. Maybe it's just my computer Windows 8 (x 64) pro, but if you have the same problem I did, see if the follow-up to the security update is installed.

  Update security for Windows 8 for x 64 systems (KB2862335)

• Corrupt 'terminal services' causing McAfee not updating

  McAfee will not update. They identified the corrupt problem "terminal services." It is impossible to change its properties.

  Hi EarthlingNo1,

  1. What is the error message that you receive in McAfee update?

  2. it is update in automatic or manual update for McAfee?

  3. have you theTerminal Service enabled on the computer?

  TheTerminal Service is managed by windows, and you cannot change its properties.

  Check the link of the McAfee Web site and try the steps mentioned below, check if it helps.

  https://community.McAfee.com/thread/21077

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite M40 - update the BIOS

  Hello

  I need an update of the BIOS not corrupted for a Satellite M40 PSM40 ATI chipset.

  Windows XP based wife M40 was a behavior more oddly for some time. Just weird crashes, does not software, etc. Seems to pass all the diagnostics, all OS/applications software is patched the current versions and analysis we all antivirus programs up-to-date and clean.

  So, I thought I'd try updating the BIOS and other related stuff. It was about two months ago... When I discovered I couldn't download this shit, or anything else, on the Toshiba site. Despite calls telephone etc. told me ' just keep trying... and try... and so, you get the picture!

  Then last weekend I tried downloading one of my Windows 2000/IE6 based PC and was surprised to find that they worked. I had previously used my Vista Home Premium 32/IE7 based PC, which I think was the source of my misery for so long to download...

  Anyway... tried unpacking the BIOS tonight only to be told that he is corrupt or not a zip file. Tried to download again, same results. Have you tried unpacking on three different PC - XP, Vista, and Windows 2000, all with the same result.

  Help please?

  See you soon
  Peter

  I can't believe that I downloaded the BIOS for the M40 (1.70) and I was able to unpack this package, so I guess that something was wrong during the download process.

  I think you know what could be my advice ;) try again

  Good luck